SM58 Error For IDOC to IDOC Scenario

Folks,
I am getting an error in SM58 from Sender system ( IDOC-XI-IDOC Scenario ) IDoc adapter inbound channel: Error Error when reading. The Issue is XI is not receiving any IDOCS. Does anybody know what is the problem
Thanks
Manish

Hi Renjith,
I'm facing the same problem the flow is basically form BW to BO.
When they load the data at sender side the idocs are stucked with error status 2:
"Could not find code page for receiving system" in transaction BD87.
Also when I reprocess it is successful. But its is getting stucked in SM58 with errors like:
1)Error in RFC connnection
2)ERROR REQU_D38IW3WD0XGK1DA48DM96N12J PG# 8 in BW
When I execute it throes an error saying "Function Module does not existsor EXCEPTION raised".
Also are many queues stucked in SMQ1 Outbound.
Please help. Many Thanks.

Similar Messages

Database error for JDBC to Proxy Scenario

Hello SAP PI Gurus,
I am having a JDBC to Proxy Scenario .And the interface is running at 10 min of duration.
However, my other interface are running fine with the same details.
But for this interface, it giving the belwo error :
Database-level error reported by JDBC driver
while executing statement 'call proc_dtdc_prod_summary'.
The JDBC driver returned the following error message: '
com.mysql.jdbc.exceptions.MySQLSyntaxErrorException: Table
'dtdc_prod_summary_temp' already exists'. For details,
contact your database server vendor.
So increased the time from 10 min to 20 min to 30 min. But the erro remians.
So pls look into this and give your suggestion.
Regards,
Ravi

Hi Ravi,
Please check execution of your stored procedure is resulting with creation of Table : dtdc_prod_summary_temp.
Modify your stored procedure to just fetch records or insert records in the existing table. Or change the code to Create a table 'dtdc_prod_summary_temp only if it doesn't exits in the Table data base.
Regards
Praveen K

Error for SOAP to BAPI scenario

Hi All:
When I am trying to send the message from SOAP client to XI I am getting and Error and also the message is not reaching to MONI.
Is there anything that is required in in SOAP adapter or Modules setting??
Error :
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>WS-Security privileged action exception</faultstring>
 <detail>
 <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
 <context>XIAdapter</context>
 <code>PrivilegedActionException</code>
 <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:697)
 at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
 at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:221)
 at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
 at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:543)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: WS-Security privileged action exception [null "null"]; nested exception caused by: java.security.PrivilegedActionException: com.sap.aii.af.security.impl.exception.MessageSecurityException: AccessControlException in Method: verify( Message, byte[], CPALookupObject ). The Code-Permission processing failed.
 at com.sap.aii.af.mp.soap.ejb.WSSecurityExtension.doValidate(WSSecurityExtension.java:173)
 at com.sap.aii.af.mp.soap.ejb.WSSecurityExtension.invokeOnRequest(WSSecurityExtension.java:107)
 at com.sap.aii.messaging.srt.ExtensionBubble.onMessage(ExtensionBubble.java:50)
 at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:576)
 ... 20 more
Caused by: java.security.PrivilegedActionException: com.sap.aii.af.security.impl.exception.MessageSecurityException: AccessControlException in Method: verify( Message, byte[], CPALookupObject ). The Code-Permission processing failed.
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.aii.af.mp.soap.ejb.WSSecurityExtension.doValidate(WSSecurityExtension.java:157)
 ... 23 more
Caused by: com.sap.aii.af.security.impl.exception.MessageSecurityException: AccessControlException in Method: verify( Message, byte[], CPALookupObject ). The Code-Permission processing failed.
 at com.sap.aii.af.security.MessageSecurityContext.verify(MessageSecurityContext.java:347)
 at com.sap.aii.af.mp.soap.ejb.WSSecurityExtension$VerifyMessageLevelSecurity.run(WSSecurityExtension.java:417)
 ... 25 more
 ]]></text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Thanks

Hi,
It looks like error because some security settings. Hope you have given the Adapter paarameters correctly.
You can check this SAP note:856597
Also you can try out with XMLSPy ..probably the error is because of usage of wrong port or authentication for that user.
Rgds,
Moorthy

Mapping Error- In IDoc to File scenario

Hi Experts,
Got the Mapping error for one interface (IDoc to file). After comparing with successful message found that the field value (TDLINE) is not availbale in first segment (E1EDT10) in idoc for this failed one.
Mapping is :
TDLINE -- Exists --- Creatif --- Receiver field(in the file)
But here due to the the empty value in first segment the message is failed in XI system, next segment values is not trasmitted to the recever end(maping is the same above). To overcome this issue please suggest the suitable mapping design in IR.
Regards
Mahesh

Hi,
After your CreateIf, use a "IfWithoutElse" by selecting the properties "Keep SUPPRESS Values". To do that, do a right click on IfWithoutElse, choose "Properties".
With this option, you will keep the fact that you have nothing in the source, and so the target context will have a "SUPPRESS" line. I have not THE solution, so do your own test.
If it's not enough, see also about the "mapWithDefault" (but that depends of your real rule).
Regards.
Mickael

Inbound Function Module SM58 Error in Outbound R3- XI- file Scenario

I am getting an SM58 error message of "Use IDOC Adapter for FM IDOC_INBOUND_ASYNCHRONOUS...." in my R3 system when trying to implement an Outbound R3->XI->file Scenario. This implies that the system thinks I am doing inbound when I am really doing an outbound IDoc to XI. I followed the guides and seem to have everything set up properly.
I also found a closed posting concerning the same error message, but there was no resolution.
My idoc also appears fine (outbound, right ports). To test, I changed my XI rfcDestination to an EDI System rfcDestination and the ORDRSP outbound idoc goes to the edi system as expected.
Any idea why my R3 system thinks I am using IDOC_INBOUND_ASYNCHRONOUS?
Thanks in advance!

Hi,
I have couple questions before exactly answering your question
What type of data you are trying to send like
1. Master data (Customer master, Vendor master)
2. Transactional data (Sales orders, Purchase orders)
If you are trying to send transactional data then check the partner profile configuration for whom you are trying to create outbound IDocs. Select your partners outbound message type and go to Message Control details tab and check your Process code and corresponding functional module if the function module used is ment for creating outbound Idocs then there should be some other that is causing the problem otherwise I guess this is the problem so you can change the associated process code function module.
Jagadish.

What is the need of xi in idoc to idoc related scenarios

Hi all,
Can any one explain me what is the need of xi in idoc to idoc related scenarios.\
we can Send Idoc with out Xi right?
Thanks,
Srinivas

IDOC to IDOC Scenario
pass through idoc to idoc scenario
IDoc to IDoc Scenario with High Volumes
SM58 Error For IDOC to IDOC Scenario

JDBC - XI - IDOC scenario, SM58 error

I am trying to set up a scenario with JDBC -> XI-> IDOC. I seem to get the data, but when I look at it in SXMB_MONI, I get the checkered flag, for the overall status, but a red flag for the outbound status. This led me to SM58 where I see this error "No authorization to send IDocs with message type Z...". It shows the caller ID as being XIAFUSER (which is different from the ID I have created on the receiving SAP system) and is in function module IDOC_INBOUND_ASYNCHRONOUS. On XI, I have the RFC (SM59) and Port (IDX1) setup for the receiving SAP system. The receiving system has an ID setup (used in the RFC on XI), has a partner profile, port, logical system, and a RFC to XI setup.
Any ideas on where to track this down? I tried giving XIAFUSER sap_all, and it still fails and this ID does not exist on the receiving system.

HI,
Just to inform you that, if any SM58 error, mainly because of IDX1 entry and RFC destination .
So that;s the reason , i just suggested to check this SAP note.
Now you have given SAP_ALL access to test right ? Even you can check with this SAP note-837595
Also check that SM59 (RFC destination) in XI system uses any User ID ? DO not select CURRENT USER option here.. and check it
Regards,
Moorthy

XI: idoc 2 file scenario( Contain error in SM58)

Hi experts,
Here i am having one issue. i have done Idoc 2 file scenario...i have created material in R/3 successfully. when i have sent the material to legacy system..Idoc was generated Successfully in r/3 but i haven't seen that message in SXMB_MONI..
i got the error message in SM58 i.e. IDX1 port SAPDE1, Client 220, RFc Destination Contain error.
plz any one can u help me on this....
Regards,
Yadav

Hi Yadav,
The RFC port you defined is not correct in IDX1. The Port name must be in the form of u201CSAPxxxu201D, where xxx is the system ID of the backend SAP system.
Just cross check it.
Check this for more details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards,
Sachin

Error in TRFC for IDoc to File scenario while sending IDoc

Hi,
Configured of 'IDoc to file' scenario is completed. Executed a stand alone program to post IDocs to XXI system using a RFC destination with required previleges.
Outbound IDoc has status successful, but it is blocked in the source system and can be viewed in TCode: SM58 (Transaction RFC). The error status is set as ':00'.
When I tried menu item 'Edit>>Execute LUW', I got the status message as 'Function module does not exist or EXCEPTION raised'.
For your information, User used in RFC destination is communication user with SAP_ALL profile(in XXI system).
Can anybody help me out in resoving the error?
Regards,
Suraj Kumar

Hi,
Thanks for your reply.
It is successfully tested and FYI as the user specified in RFC Destination is a communication user in destination system (XI), it does not have remote logon.
Hope I am clear.
Please let me know, if you need any further information.
Regards,
Suraj

Error in Operation Mapping for Idoc to File Scenario

Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

Problem IDOC to File scenario: No service for system SAPIDC, clnt in ID

in IDOC to File scenario, when IDOCis triggered from R/3 to XI, it gives error in SM58 transaction
"No service for system SAPIDC, client 800 in Integration Directory"

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

Error in Idoc-XI-File scenario

dear all,
i am doing one Idoc to Xi and then to a flat file scenario. i have created one BS of type 3rd party for receiver and ont BS of type Web as ABAP. Then I created one namespace and import the Idoc type there. I have not created any DT, MT, MI, MM. I have created one interface Mapping where both sender & receiver has same structure & I have selected there mapping type of ABAP-Class with one Z program name.
Then, in ID, I created two CC channel one as receiver of File type & second sender as Idoc type.
Now, the thing is tht I am not able to get the file at the receiver end. Can anybody help me tht where I am doing an error?
Warm Rgards,
N.Jain

Then, in ID, I created two CC channel one as receiver of File type & second sender as Idoc type. 
>>
you dont need a Sender IDoc channel to be configured.
Now, the thing is tht I am not able to get the file at the receiver end. Can anybody help me tht where I am doing an error?
>>>
1. what does it say in SXMB_MONI ? Has the IDoc come into XI ?
2. In communication channel monitoring what is the error for the recv. file adapter

Error in IDOC-XI-IDOC scenario

Hi folks,
Let me explain the issue. This is an IDOC-XI-IDOC scenario. No BPMs involved. SAX parsing used to parse the IDOCs.
We had around 35000 IDOCs coming in from Brazil system, and they are all stuck in SMQ2 (Inbound queue) in XI. The first message of every queue is in SYSFAIL status, with the status text as Problems found during the EXPORT to specified keyin table.
When I try to execute the queue manually, nothing happens, but an error comes at the bottom of the screen, saying Function module does not exist or EXCEPTION raised.
I checked the dump on ST22, and it shows 130 runtime errors yesterday. The name of the runtime error is EXPORT_TABLE_UPDATE_CONFLICT.
In the what happened? part of the dump, it says Error in ABAP application program. The current ABAP program CL_XMS_PERSIST=============CP had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program.
Even SXMB_MONI is not opening (for yesterdays date). When I try to open it, it hangs for a long time, and finally opens an ABAP Runtime Errors page with the runtime error titled as SNAP_NO_NEW_ENTRY and the error short text as Runtime error: Unable to write short dump
Please advise.Thanks a ton!
cheers,
Prashanth

Hello Prashanth,
First of all this is an XI issue and belongs in that forum.
The export problem is typical to situations where your XI DB is out of space/out of table space. Please check with your Basis team.
Function module does not exist or EXCEPTION raised- This message is a standard ABAP RFC message. For an RFC function call to succeed, you need the same RFC function to exist on both systems. However this is probably not the case- it is more likely that you're out of DB space as I already wrote.
Good Luck (don't forget to award points)
Ofer

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

SM58 Error For IDOC to IDOC Scenario

Similar Messages

Maybe you are looking for