Small error while opening web app

When i open my web app which was deployed in Prod mode,
i get the following error when i open the link in the browser
*(305) Internal Error - A fatal exception occurred. javax.transaction.HeuristicMixedException: (weblogic.jdbc.wrapper.JTSXAResourceImpl, HeuristicHazard, (javax.transaction.xa.XAException: Io exception: Software caused connection abort: socket write error))*
null
But the same application is working fine in QA Server.
The env is weblogic 8.1.3 and windows. There is only one domain in the prod server and that domain has only 1 admin server and 1 application has been deployed to it. The application was working fine before, but from last week, i am getting the error specified above.
Thanks in Advance

Hi,
Check the below thread...
Web Application Designer Opening Error

Similar Messages

Re : Java error while opening WEBI Report in BO 4.1

Hi Team,
while opening webi report i am getting folowing error
java.util.concurrent.ExecutionException: java.lang.NullPointerException
at java.util.concurrent.FutureTask.report(Unknown Source)
at java.util.concurrent.FutureTask.get(Unknown Source)
at javax.swing.SwingWorker.get(Unknown Source)
at com.sap.webi.toolkit.ui.tasks.WebITask.getResult(WebITask.java:171)
at com.sap.webi.ui.tasks.NavigOnDocumentTask.doneProcess(NavigOnDocumentTask.java:95)
at com.sap.webi.toolkit.ui.tasks.WebITask$PrivateWorker.done(WebITask.java:378)
at javax.swing.SwingWorker$5.run(Unknown Source)
at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
at sun.swing.AccumulativeRunnable.run(Unknown Source)
at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source)
at javax.swing.Timer.fireActionPerformed(Unknown Source)
at javax.swing.Timer$DoPostEvent.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.WaitDispatchSupport$2.run(Unknown Source)
at java.awt.WaitDispatchSupport$4.run(Unknown Source)
at java.awt.WaitDispatchSupport$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.WaitDispatchSupport.enter(Unknown Source)
at java.awt.Dialog.show(Unknown Source)
at com.jidesoft.dialog.StandardDialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.webi.toolkit.ui.dialog.MessageDialog.setVisible(MessageDialog.java:186)
at com.sap.webi.ui.SwingClientHelper.showWarning(SwingClientHelper.java:493)
at com.sap.webi.ui.context.managers.DataManager.checkForEmptyDataProviders(DataManager.java:2592)
at com.sap.webi.ui.tasks.workflows.RefreshWorkspaceWorkflow$1.run(RefreshWorkspaceWorkflow.java:147)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
at com.sun.deploy.security.CPCallbackHandler.isAuthenticated(Unknown Source)
at com.sun.deploy.security.CPCallbackHandler.access$1600(Unknown Source)
at com.sun.deploy.security.CPCallbackHandler$ChildElement.checkResource(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.checkResource(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath$JarLoader.getResource(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at com.businessobjects.rebean.wi.impl.model.viewing.ReportEngineOutputSourceFactory.createReportElementPageOutputSource(ReportEngineOutputSourceFactory.java:72)
at com.businessobjects.rebean.wi.impl.services.NavigationServiceImpl.internalNavigateToReportElement(NavigationServiceImpl.java:313)
at com.businessobjects.rebean.wi.impl.services.NavigationServiceImpl.navigateToReportElement(NavigationServiceImpl.java:105)
at com.businessobjects.rebean.wi.app.ViewingFacade.navigateToReportElement(ViewingFacade.java:208)
at com.sap.webi.ui.viewer.PageFactory.getPages(PageFactory.java:634)
at com.sap.webi.ui.viewer.PageFactory.getPages(PageFactory.java:196)
at com.sap.webi.ui.tasks.NavigOnDocumentTask.doIt(NavigOnDocumentTask.java:68)
at com.sap.webi.ui.tasks.NavigOnDocumentTask.doIt(NavigOnDocumentTask.java:23)
at com.sap.webi.toolkit.ui.tasks.WebITask$PrivateWorker.doInBackground(WebITask.java:348)
at javax.swing.SwingWorker$1.call(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at javax.swing.SwingWorker.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Any ideas please,
Thanks & Regards,
Varun G

"...at com.sap.webi.ui.tasks.NavigOnDocumentTask.doIt(NavigOnDocumentTask.java:23) at com.sap.webi.toolkit.ui.tasks.WebITask$PrivateWorker.doInBackground(WebITask.java:348)" Please check out SAP KB 2115770 - Error encountered when opening a Web Intelligence document reporting off of SAP BW BEx queries and Universes in BI 4.1 SP05 on http://service.sap.com/sap/support/notes/2115770. The resolution can be found on BI4.1 SP05 Patch 03 and above. Hope this helps, Jin-Chong

Error while opening web template through WAD 3.X

Hi all,
The below error is getting displayed while opening web template through WAD (Sap BW 3.X):
" Internal error - No Template property standard item. "
What needs to be done now.
Please reply.

Hi,
Check the below thread...
Web Application Designer Opening Error

Page not found Error while open install app

I go through the all necessary steps to configure app domain & steps to create SharePoint hosted app still got 'page not found error'
The final app URL that i got afte r open install app -"http://app-125e72eedbe144.domain name:9922/FirstApp/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fsp1%3A9922&SPLanguage=en-US&SPClientTag=6&SPProductNumber=15.0.4420.1017&SPAppWebUrl=http%3A%2F%2Fapp-125e72eedbe144.domainname%3A9922%2FFirstApp"
i don't understand where i did mistake can any one help me to resolve that issue.

Hi,
According to your post, my understanding is that you get the “page not found” error while you open install app.
You need to have a SharePoint Web Application that is bonded to port 80 without a host header.
If you want to run it on https (SSL) then you also need to add an extra binding for SharePoint Hosted Apps to work.
For more information, please refer to:
Troubleshooting SharePoint 2013 Hosted Apps on-premises: “404 not found” error
404 & 401 Errors with the App Management Service - SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Timerjob Access denied error while opening web object

Hi Team,
I have created a timer job to get list information on the site. Everything is fine in the development(Stand alone server) . Got access denied error while running same timer job in QA server(one app and one WFE).
Note: This timer job is globally deployed.
Code snippet :
SPSite site1 = webApp.Sites[0];
SPWeb web = site1.RootWeb;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(site1.ID))
using (SPWeb currWeb = site.OpenWeb(web.ID)) // Got access denied error here.
Additional information:
Sharepoint timer service account : Domain\SP_Farm
Site app pool account : Domain\SP_App.
Both accounts have site collection administrative access on the site. Do i need to check access permissions on DB level also this error ?
Waiting for urgent reply..

Hi,
1. Please check the link below:
Fixing Access Denied Errors With SharePoint 2010 Timer Jobs
http://www.sharepointsecurity.com/sharepoint/sharepoint-security/fixing-access-denied-errors-with-sharepoint-2010-timer-jobs/
2. Try to set RemoteAdministratorAccessDenied to false using PowerShell
Access denied when deploying a timer Job or activating a feature from SharePoint 2010 content web application
https://support.microsoft.com/kb/2564009?wa=wsignin1.0
3. Check your ULS log for detail error message.
Best Regards
Dennis Guo
TechNet Community Support

Strange Error while opening Web UI in a new browser window

Dear Experts
My requirement is to launch one of my custom Web UI screens in a new window upon clicking a button.
I am successfull in lauching it in new window.
How did I do it:
Step 1) Created a custom object type (ZOBJ) for my z component in SPRO->UI Framework Definition->Define UI Object Types.
Step 2) Created a logical link (ZLL) for my Z component in SPRO->UI Framework->Technical Role Definition->Define Navigation Bar Profile.
After that, In the same path, select Define Profile->Define Generic OP mapping->(Here Assign Object type ZOBJ(step 1) and Logical link ZLL(step 2) )
Then created a dynamic URL and passed this URL to the "on_client_click" parameter of my button.
Sample code is below.
I put the below in the .htm of the view where my button was declared.
data: lv_url_string TYPE string.
lv_url_string = 'http://server name:port number/sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-syscmd=nocookie&
crm-object-type=ZOBJ&crm-object-action=B'.
Note: Here ZOBJ is my custom object type that I created for my Z component.
<thtmlb:button id            = "NW"
                     onClientClick = "javascript:window.open('<%= lv_url_string %>');"
                     tooltip       = "New Window"
                     text          = "New Window" />
Problem I am facing:
The above code is successfully opening my custom screen in a new window.
But on the toolbar (where we usually see error messages in Web UI),
I am getting an error message with the below description.
Type= SYSTEM_ERROR, ID= ERROR_SESSION_INIT, description= 16AA9A3937A9BB56E10000000A11447B
I am not able to understand what this error is. The message is appearing only for the first time I am displaying my Z component in a new screen. Interestingly, when I do some action on my screen (expand the assignment block for example), this message is gone. This message doesn't seem to be effecting any functionality, but the users certainly don't want to see an error messsage like this.
I did some research on this and this error looks to be coming from the class CX_WS_MESSAGE_SYSTEM.
This class has an attribute (CX_ROOT) with initial value "16AA9A3937A9BB56E10000000A11447B" (same one I am getting in my error message). I am not sure though because this attribute (CX_ROOT) is present in several other classes also.
I would really appreciate if somebody can throw some light on this issue.
Thanks
Raj

Hi Arun
Thanks for your reply.
I tried the way you suggested. But unfortunately I am still getting the same old error.
Forget to mention something...actually I am seeing this error in the new session (window) only. My original window is not showing any error.
And also just FYI...This is inside the Interaction Center Web UI profile ->Account Identification -> Identify Account->Enter Account ID->Click on Confirm button.
At this point, I am first showing a popup window with text "Do you want to open Partner details in new window".
This popup has 2 buttons 'Yes' and 'No'.. If the user clicks on 'Yes', then I am opening my custom screen (Partner Details) in a new window.
This is the point I am seeing the error (only in the new window).
Type= SYSTEM_ERROR, ID= ERROR_SESSION_INIT, description= 16AA9A3937A9BB56E10000000A11447B
This custom screen contains several (only) assignment blocks (all lazy initially). When the user expands on any assigment block, the error is gone and everything looks good.
Please suggest.
Thanks and Regards
Raj

Error while opening Web Start

Hi All,
I have installed XI 3.0, while opening Integration repository I am getting the error
<b>"G:\Documents and settings\DXIADM\Local Settings\Temporary Internet Files\
content.IE5\V5KEEQQ5\repository[1] .jnlb is not a valid Win32 application"</b>
Please do the help ASAP.
Thanks,
Venkat

Hi Venkat,
Please look at following weblog
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Thanks,
Tuhin

Error while opening Web Catalog

Hi,
I am not sure why but i am getting following error when i try to open the Web Catalog.
Error
Unknown connection error : sun.security.validator.ValidatorException: PKIX
path building failed:
sun.seciruty.provider.certpath.SunCertPathBuilder: unable to find
valid certification path to requested path to requested target
Please could nay one let me know what is the cause for this and what is solution ?
Thanks,
Tushar

Enter a SR at support.oracle.com. There might be a patch for this.
regards
John
http://obiee101.blogspot.com

Error while opening gui app from commandline[SOLVED]

When I try to run a gui application from command line, I get following error:
# thunar
No protocol specified
Thunar: Cannot open display:
I have not been able to get info regarding this in the wiki.
Last edited by rnarch (2012-03-23 05:53:13)

You are trying to run thunar as root. I really suggest you not run GUI stuff that can move and delete stuff with a mouse gesture as root.
I assume you are not running X as root. If you are, allow me to redouble my previous admonition.
In your example, are you running that from the command line, or from a terminal emulator under X?
If you must run as root, try MisterAnderson's suggestion, but note that the command is issued as a normal user.
You can also run thunar as root from a terminal by specifying the X session to which to attach, but I cannot put the incantation together off the top of my head. If you are interested, let us know and someone will probably come up with help.

Error while opening Fiori app on iPad

I keep getting "Service XXXX failed. Contact your system administrator. Cannot call service with URL: /sap/opu/....." error on the iPad - both in the browser and the Fiori client. I am able to login to the launch pad and also see the apps, the error is triggered if I click one of the apps / tile.
I believe this would be triggered if the service wasn't activated. In our case, the service is active and the application works well on the laptop browser via the launch pad. Strange that the same app isn't working on the iPad browser and gives this error.
Note - I have given the Fiori Launchpad URL in my laptop browser, iPad browser (tried with Chrome and Safari) and Fiori mobile client.
Any tips on how to troubleshoot ?
Regards,
Parag.

Both Gateway and ERP are Unicode. Dump details below:
Category               Internal Kernel Error
Runtime Errors         CALL_FUNCTION_SEND_ERROR
Application Component BC-ABA-LA
Short text
    " " (I/O error)
What happened?
    "CPIC-CALL: 'ThCMSEND' : cmRc=18 thRc=0#Statistics not active "
    An error occurred when executing a Remote Function Call.
Error analysis
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThCMSEND' : cmRc=18 thRc=0#Statistics not active "
    Status of connection.... "CODE=CM_DEALLOCATED_NORMAL CM_SEND_RECEIVED
     CM_COMPLETE_DATA_RECEIVED SAPCODE=0 CONV=52753777"
    Internal error code.... "RFC_IO5"
    There is an error in the communication system. To clarify
    and resolve the error, contact your system administrator.
Information on where terminated
    Termination occurred in the ABAP program "/IWBEP/SAPLFGR_MGW_CLIENT_IF" - in
     "/IWBEP/FM_MGW_MED_LOAD".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 1
    of the (Include) program "/IWBEP/LFGR_MGW_CLIENT_IFU03".

-1712 error while opening automator apps

I have a few custom that erro out with -1712 when i try to open them on my iMac. on my MBP they work perfectly. any help ?
I have checked the disk permissions and the verified the disk but no luck. I have rebooted as well.

It had nothing to do with the actual wokflow. ALL automator apps on my iMac were having the same problem. Used Onxy to clean up the applicaitons, systems and fonts cache. one reboot later all is well again.

Error while binding web app?

Hi everyone,
I am using OC4j10.3.2, Java5 and EJB3.0
I have used annotations in the WishlistDTO class such as @EJB SessionBean b, but I didn't get this error before..
Anyone know what this error means or how I can debug?
Thanks!
-K
[java] Jul 20, 2007 1:16:08 PM oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER
[java] WARNING: Exception returned by remote server: {0}
[java] java.rmi.RemoteException: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Error parsing annotation for class com.apps.wishlist.deliveryPlatform.dto.WishlistDTO
[java] at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:420)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:585)
[java] at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
[java] at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
[java] at java.lang.Thread.run(Thread.java:595)
[java] Caused by: oracle.oc4j.admin.internal.DeployerException: Error parsing annotation for class com.apps.wishlist.deliveryPlatform.dto.WishlistDTO
[java] at com.evermind.server.http.deployment.WARAnnotationParser.parseAnnotatedClass(WARAnnotationParser.java:136)
[java] at com.evermind.server.http.deployment.WARAnnotationParser.parseAnnotations(WARAnnotationParser.java:106)
[java] at com.evermind.server.http.HttpApplication.parseMetaData(HttpApplication.java:8575)
[java] at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1113)
[java] at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:738)
[java] at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
[java] at com.evermind.server.Application.getHttpApplication(Application.java:571)
[java] at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990)
[java] at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1909)
[java] at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1606)
[java] at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:238)
[java] at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:418)
[java] ... 7 more
[java] Error: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Error parsing annotation for class com.apps.wishlist.deliveryPlatform.dto.WishlistDTO
[java] Java Result: 17
Message was edited by:
karthequian
Message was edited by:
karthequian

Hey Steve,
Thank you for your reply; I didn't know about EJB loggers! Let me try and implement a logger and see what errors I get.
I do not see any compile time errors with my annotations as such during compile time. I have tried this. Let me know if you see something wrong. I think I might be using the wrong lookup, but I don't know how to verify that..
Context ctx = null;
try{
     System.out.println("SUCCESS!!!!!!!!!!! " + f.toString());
catch (Exception e) {
     System.out.println("Exception1 " + e);
try{
     f = (WishlistFacade)ctx.lookup("java:comp/env/WishlistFacade");
     System.out.println("SUCCESS!!!!!!!!!!! " + f.toString());
catch (Exception e) {
     System.out.println("Exception2 " + e);
where f is...
@EJB WishlistFacade f; embedded in a Servlet class.
Thanks again.
-K

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

Error while clonning Oracle app 11i

Hi all Once again, a new day a new error :)
i am having Error while clonning Oracle app 11i on windows 2003 sp1 32 bit db 9.2.0.6.0
when running adcfgclone.pl dbTier it successfully runs uptill 70% at this stage it throws the below error
================================================================================================
Beginning database tier Apply - Wed Mar 7 01:49:19 2012
Log file located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
=================================================================================================
when i check the ApplyDBTier_03070149.log
i found this below
==============================================================================================================================================================================================================================
Skipping Profile Phase
Skipping Apply Phase
Executing StartDbLsnr...
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
     "d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process NPRO ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCNPRO))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=hassan.com)(Port=1534))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
NL-00280: error creating log stream d:\oracle\neproddb\9.2.0\network\log\npro.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
.end std out.
.end err out.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
     "d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt"
ECHO is off.
ECHO is off.
Creating the control file for NPRO database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd exiting with status 1
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:474)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
     at java.lang.reflect.Constructor.newInstance(Native Method)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
     at java.lang.Thread.run(Unknown Source)
==============================================================================================================================================================================================================================
please help me out with your advices
Thanks
Hassan

Dear Hussein / helios ,
it worked finally i gave a high number 76 and it worked with out any problem also this time i gave loop back adapter an ip address i just remember now that i was not giving an ip to my loop back adapter i gave as below
ip : 10.10.10.10
subnet : 255.255.255.0
and made my host file look like as
127.0.0.1 localhost
10.10.10.10 hassan.com hassan
then i tested the ping by pinging hassan.com and the reply came from 10.10.10.10
and also i disabled my wireless network card before running adcfgclone
and it worked ALLHAMDOLLILAH :)
Thanks to the great masters Hussein & Helios :)
Now its time for appsTier cloning hope that it goes smooth :)
Regards,Re: Error while clonning Oracle app 11i
Hassan

Error while opening the BO report

Dear Experts,
Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
Failed to get the document information. (LO 26315)
Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...

Hi ,
You can view the following URl ,which may be helpful for you.
Live office excel error
-Thanks,

Small error while opening web app

Similar Messages

Maybe you are looking for