Smart Key

I broke my smart key.. is there anyway to get pass the security check now???

Me too,
I have my key but when I put in in and set the password all I get on the screen is a message that says it is updating my config files. This has been updating now for over 24 hrs. I can't disable it or move into anything. I now am the proud owner of the DUD type of motherboard.
Looks like a $ 150 down the drain. MSI tech support gives no response.
I guess I won't be buying an MSI m/b again.

Similar Messages

Latex-suite: disable smart key mappings (e.g. ... - \ldots)

I've recently started using LaTeX. Since vim/Gvim is my absolutely favorite text editor, it's plugin latex-suite comes in handy with features such as text folding. Latex-suite also has some auto-completion/conversion features; unfortunately I don't like them. The most annoying are conversions such as ... -> \ldots. While this may be useful when using ... inside a text, it definitely isn't when trying to format the LaTeX document with ............. lines because they are automatically converted to \ldots\ldots\ldots!!!
I've already found out that this feature is called "Smart Dots" (see http://vim-latex.sourceforge.net/docume … suite.html --> "3.9. Smart Key Mappings"). Here http://vim-latex.sourceforge.net/docume … -keys.html it is described how to disable some of the smart key mappings; unfortunately, not the Smart Dots.
Any idea how to disable Smart Dots or even all auto-completion/conversion features in general? I generally don't like auto-completion/conversion!

It turns out this isn't QUITE as simple as I thought. Since some latex elements are closed (eg \begin{something} ... \end{same something}) while others are not (eg \chapter \section) the folding function needs to check for each.
First here is my generic folder
function ToggleFold(marker)
if foldlevel('.') == 0
normal 0
call search(a:marker,'c')
let x = line('.')
normal %
let y = line('.')
execute x . "," . y . " fold"
else
if a:marker == '<'
normal k
let x = line('.')
normal j
normal zd
execute x
normal j
else
normal zd
normal %
endif
endif
endfunction
"some example bindings
nmap <space> ;call ToggleFold("{")<CR>
" } This is just here to match/close the previous line
au BufNewFile,BufRead *.svg set filetype=xml
au FileType html,xml nmap <space> ;call ToggleFold("<")<CR>
au FileType html,xml let b:match_words = '<$[^ >]*$[^>]*>:</\1>'
And the whitespace or python-like code folder
function ToggleIndentFold()
if foldlevel('.') == 0
let x = line('.')
let i = indent('.')
normal j
while indent('.') > i
normal j
endwhile
normal k
let y = line('.')
execute x . "," . y . " fold"
else
normal zd
endif
endfunction
"" The above function may hang in the while loop if
"" the file does not have a trailing empty line.
"" The following function checks for and/or adds one.
function StartOutline()
let x = line('.')
normal G
if indent('.') != 0
normal o
execute x
endif
endfunction
The challenge is parts of each of these would be needed for "complete" latex folding. The begin/end bounded blocks can use the generic function with these line
au BufNewFile,BufRead *.tex nmap <space> ;call ToggleFold("\begin")<CR>
au BufNewFile,BufRead *.tex let b:match_words = 'begin{$[a-z]*$}:end{\1}'
but this will not fold "unbounded" blocks like chapter section and item.
Here is my first attempt at a general purpose latex folder. It works ... most of the time.
function ToggleLatexFold()
if foldlevel('.') == 0
let block_type = matchstr(getline('.'),'$chapter\|section\|item$')
if block_type != ""
" I don't like the next four lines - there should be a better way of
" getting the number of lines in the buffer
normal ma
normal G
let last_line = line('.')
normal `a
" end ugliness
let x = line('.')
normal j
while matchstr(getline('.'),block_type) != block_type
if line('.') >= last_line
break
endif
normal j
endwhile
normal k
let y = line('.')
execute x . "," . y . " fold"
else
normal 0
call search("\begin{",'c')
let x = line('.')
normal %
let y = line('.')
execute x . "," . y . " fold"
endif
else
normal zd
normal %
endif
endfunction
au BufNewFile,BufRead *.tex nmap <space> ;call ToggleLatexFold()<CR>
au BufNewFile,BufRead *.tex let b:match_words = 'begin{$[a-z]*$}:end{\1}'
It fails, however, when a section is followed a new chapter rather than another section. This part would be easy to fix. It also fails, though, when a same-flavor block is nested within the current - for example a \item that has a nested enumerate or itemize will not fold properly.
For my use, I'll stick with putting braces in comments around my major elements. But hopefuly this will give you some ideas. If you make any big improvements, let me know.
No doubt I have really just reinvented the wheel - but thats the best way to really know how wheels work!

Smart Key App for iOS not available?

Hi. I just got myself a pair of Sony MDR-XB450 headphones. I expected to be able to get the Smart Key app, as advertised, to let me use the button on the headphones. But its nowhere in the appstore. Did they get rid of it for iOS? Its on the Google play store, but not the iTunes appstore. This is upsetting because now the button on the mic is essentially useless. Is there anyway to get this app? Or even a different app that does the same thing? Joey Echeverria

Hi zim799,
At your convenience, please reach out to our colleagues at Sony Mobile for further assistance with your question. You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/. Thanks for your message today! >Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Do you think a magnetic cover or a car smart key could affect the Macbook Air?

I just bought a Macbook Air 11inch and I noticed that after two days the wifi is randomly disconnecting and after three days even the display was problematic, It display in only 25% of the page. Now, I get a new one but I am wondering if the problem is not the magnetic cover or my car smart key when I put the key and the Mac in my bag.

No, the neodymium gauss rating on such ceramic permanent magnets is not high.
Even a huge N50 gauss Neodymium would need direct contact to cause damage to the Macbook Air.

Would smart key work with k7n420?

hello,
i could buy the msi smart key for $5, would it work with k7n420 pro? would it work with any msi mobo? how about other brands of mobo?
thanks,
edison

yes
vince

Jbuilder4 smart key is Gone?

the tree thing (smart key) is what they call it in Jbuilder is gone. instead i have the win/explorer type -square box with a cross for viewing subdirectories.
How do i get back the smart key(the round thing with a tail--the sperm)?
this is serious. i looked in tools/editor options/general/smart keys and nothing happens.
help?????????

I'm not 100% sure that I know exactly what you are talking about. Try this. Bring up the IDE options panel and change the "look and feel" to "metal". Then press "ok".
If this isn't what you are looking for try rewording your question a little.

Smart key board

My Neice uses something at school called Smart Key Board. see attached image.
Its a learning/aid where she sees the keys on screen so she doesnt have to look at the actual key board.
She loves it and wants it on her MacBook at home.
But I cant seem to find it for the mac?
Has any one ever heard of such a thing?
Any and all replies are MOST appreciated. :-)
Thanks.
Scott

Hi again CARUCCJA,
Alternatively, I have conducted some more research on which driver to install on your system, and I came across this driver to enable the CAPS Lock notification. This software can be downloaded and installed from the link below:
HP My Display Application
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Problems with MSI Smart Key

:angryfire:I lost my MSI Smart Key...
How to run my PC without USB MSI Smart Key?
I try to reset BIOS, but no results...
Any suggestion?

much more info please Laufer

Changing Smart key functions

Is there a way to change the PTT function ket to something else. I could do this with my Razar poone and hped i could do it with this one
Solved!
Go to Solution.

Go to Options > Screen/Keyboard. Set the Right or Left convenience key to whatever you want.

Using function keys (F1, F2, ...) without needing to hold down the fn key

By default on the Sprout, you need to hold down the "fn" key in order to access the real function keys (F1, F2, F3, ...) instead of the "actions" indicated by the icons on the keys. Normally, there's a BIOS option that lets you change this, so that the F1, F2, F3... function keys work without needing to hold down the "fn" key. E.g. as described in this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
However, I don't see this BIOS option in the Sprout's BIOS, which looks quite different than the BIOS in that article.
Is there some way to change the "fn" key behaviour?
...Tim...

Hi Streup,
Simple... On the S440 keyboard if you look at the top-left key.. Esc.. You should see a second label "FnLk" - Function Lock.
Press the Fn key and then Esc. The Fn Key will light up and now the Function Keys are activated.
Repeat the same to get the smart keys back.
Hope this helps
Mark

Headset volume down key problem with STH30

Hello!
I just bought a Sony STH30 Stereo Headset for my Xperia Z1.
But when pressing the "Volume down" button on my headset, the key is hold for 5 to 10 seconds.
This only happens on the Xperia Z1, it's working fine on other phones.
It also works pretty fine when changing the volume of an active call - it only happens when trying to lower the volume of the phone or music.
Greetings from germany,
Daniel

i have the same problem with my zenfone 5, 3 key is notworking, when i press pause/play my music player is pause and don't play again until i'm reset my phone, as the same volume up / down is nerver work, but it's work fine on samsung, sony devices ( i'm not try on Xperia Z1 )
Please tell me another way to use the three button, i have try "Headset Button Controller" app, "Smart key " app by Sony, but all is missing something like this:
- 1 click play / pause button to play / pause: OK
- 2 click play / pause button to next : OK
- 3 click play / pause button to previous : OK
- Volume Up / Down key : not working.
Please advices.
thanks.

How do I find my router password?

I recently had my computer cleaned because of viruses. I beleive that the cisco smart key program was deleted in this process. My internet works for electronics already with the password entered but I'm trying to add a new product and now when I put in the cicso cd to go to my settings it can no longer find my router. Does anyone have any suggestions for me on how to look at/change my router settings?

if you know anyone who has a mac that has used (and saved) your password, you can generally view it by going into the Airport Preferences

Motorola E815, Address Book, iSync 2.1.1, Mac OS 10.4.3

I just replaced my Motorola v60i which worked perfectly fine with Address Book, iSync, Mac OS X 10.4.3, on a PowerBook G4. I upgraded to the Motorola E815 and although it syncs through Bluetooth it does not sync numbers with wait commands (i.e., 9785551212w1234w1) properly. The w is the wait command for burst dialing whereas 9785551212 would be sent, then you would press the right smart key to send 1234 (a password), and then you would press the right smart key to send 1 (to play a message). When the infomation is synced, iSync sends 978555121212341.
If you manually enter the wait command on the phone and then sync it eliminates the w when synced to the Address Book.
I played with entering a upper case W, but when synced, it converts it to a 9.
Has anyone run into this? Is there a fix for this? Manually editing the numbers with w commands would be a real hassel.
I contacted Verizon Wireless (Massachusetts) and they directed me to Motorola. After 6 calls to Motorola and 2-hours on the phone because their system kept hanging up on me, a support representative told be "Oh, you have a Macintosh. We don't support the Macintosh so call Apple." Real helpful. ;-(
Any help would be greatly appreciated.
PowerBook G4 15-inch Mac OS X (10.4.3)
PowerBook G4 15-inch Mac OS X (10.4.3)
PowerBook G4 15-inch Mac OS X (10.4.3)

Mike, thanks for your response and advise.
I talked to Apple via AppleCare Tech Support. Paul (the technician) was extremely helpful and we worked through the issue.
What we did was to create a test user account and try syncing from the e815 to the Mac. That worked and all numbers with a w in them transferred fine. We deleted the test user.
In my primary user account, we deleted the e815 from the Bluetooth System Preference, deleted the iSync device, deleted com.apple.Syndication.plist and com.apple.isync.plist from the Library > Preferences folders. Restarted the computer with Disk 1 of the original Mac OS X Installation CD and checked and repaired the harddrive. We restarted again.
We set up the e815 in the Bluetooth System Preference. We established a connection in iSync. We than synced the phone. After syncing the e815 did not have the w in the numbers on the e815.
We reset the device (phone) in inSync, which deleted all the information and transferred the data from the Address Book to the e815. The w were not in the e815.
I then entered the w using the Insert Wait command in the e815 and resynced. Everything worked. So, the key "seems" to be to insert the w in the cellular telephone and then sync to the Macintosh. We synced several times afterwards and everything seems fine now.
Paul (at AppleCare), you are awesome! Thanks so much.
FYI - Paul said he would escalate the issue and hopefully Motorola or Apple will fix this "feature."
PowerBook G4 15-inch Mac OS X (10.4.3)

Presentation Director 4.07

I am told that my ThinkPad T60 needs a Presentation Director in order to function the way it was designed to.
Where do I find this Driver (7vua49ww.exe ?)? Lenove does not offer this s/w on their website for some reason.
Has the driver been superceeded by another, like Smart Keys or some such?
Who can tell me what should be used for the Presentation Director?
My T60 has an ATI X1400 chip and it was they who said I needed the PD.
Solved!
Go to Solution.

Hello and welcome,
Here's the version currently listed for your T60: http://support.lenovo.com/us/en/downloads/ds001661
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Reinstall of Premiere Elements 11 Freezes

I had both Photoshop Elements 11 and Premiere Elements 11 working on my Windows 8 machine. I uninstalled Premiere for troubleshooting reasons. I am trying to reinstall from disc. The disc spins a lot, I select the Premiere button and then the installation process freezes. wal1.

Hello ATR,
I checked that the Adobe Premiere Elements was not installed. I verified on the on the uninstall screen in control panel. I have Adobe Photoshop Elements 11 and 10 installed. When I uninstalled the Adobe Premier Elements 11 I asked it to keep its settings when prompted.
I downloaded the ccleaner. (backing up the registry settings) last night.
This am, I tried to connect to the internet to check email and such. My cisco Linksys E420 wifi router stopped talking to my cable providers Motorola Surfboard modem. Only the top four green lights were on and the yellow blinking PC/activity light failed to light. Cisco AnyConnect says it can't do anything because there is no internet connection. I connected my laptop via Ethernet cable to the cable modem, bypassing the router to get web and email connectivity.
My priority now is to restore function with my wifi service to the household.
The reason that I was troubleshooting and uninstalled the Adobe Premiere Elements 11 was that I have Pixela ImageMixer SE 3 that came bundled with my Canon Vixia HF20 and was trying to restore functionality to the Pixela video library and video editor. I like the way that it renames sequential .mts files to the format (folder=YYYYMMDD and contained within is the YYYYMMDDTTTTSS.mts) format, it makes it easier to find files manually through File Explorer. The Pixela SW was locking up after reinstalling it and gave a window that said updating files then froze. The SW is light and simple and provided an alternative to the heavier Premiere. Pixela Support suggested a SW conflict with another CODEC and suggested uninstalling the Premiere Elements to see if that worked and then reinstalling the Premier Elements from disc. No guarantees that it would work correctly with Windows 8 though. Premiere Elements then failed to reinstall.
I may be on and off the air until the wifi is working properly.
How do I revert to the old registry settings. Or, am I better off trying to get the CiscoConnect going by its smart key or other settings.
wal1

Smart Key

Similar Messages

Maybe you are looking for