Smart Web Printing does not show/print german special characters (äöü)

I have installes Smart Web Printing on my computer with WIndows 7. I do use a german localization. Selected text is shown and printed correct, except german special characters ä ö ü. They are even not shown correctly in the menues of the application.

Response to cor-el suggestions:
I tried what you suggested as far as checking the theme (it's "Default 8.0") and deleting the sessionstore files (there was one .js file, one -1.js file and one .bak file). I still have the same slow response problems (especially typing, it has gone dead on me for a short time twice while typing this replay so far, now a third time) and lost of headers and trailers and some data.
I did the suggested actions three times just to make sure that I was doing them correctly. On the first try, the sessionstore.js and sessionstore-1.js was more than twice the size of sessionstore.bak. Since doing what was suggested, the sessionstore.js and sessionstore.bak are, I believe, the same size. I did not write down their size is why I am not certain.
The printing problem appears to only be with one website which is an investment website which I would prefer not to document here. I print from this website each weekday and I have confirmed that the printing problem started when the upgrade to version 8.0 occurred.
I need a solution to this or I am going to either go back to IE (Ugh!) or find another browser. The typing delays are an extreme annoyance since I do lots on the Internet including a lot of emailing. The delays also involve the buttons to select functions within a website.
Is there a way to get back to the version previous to version 8.0?

Similar Messages

HP printer does not show up as part of the neighborhood in printer utility

Hi Everybody -- I am trying to connect to a shared HP printer connected on my XP machine. It works fine when trying to connect to it from other pc's, however, when ever i try to connect to it from my MAC, the pc name and printer does not show up as part of the neighborhood in the printer setup utility (which is weird).
I do have the drivers installed for that particular printer and it works fine with USB connection (HP6110). I know this is not a firewall issue becuase I tried connecting to the printer while disabling the firewall.
Appreciate any help on this matter.

Look over the printer sharing articles on iFelix Tech Notes.
In addition, check the Mac's System Preferences> Sharing> Firewall tab> Advanced button and uncheck 'block unwanted UDP traffic' and "enable stealth mode". On the WinXP computer, go to Control Panels> Administrative Tools> Services and set 'Computer Browser' to manual from automatic.

HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed. Sorry.
You do have some options at this point.
If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option. However, it is my opinion that this money would be better spend being applied towards a new printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Airport extreme usb printer does not show on macbook

I have been trying to set-up a printer on a Airport Extreme through the USB cable. However, the printer does not show under "Printers and Scanners" and the help on-line has not helped at all.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

W520 Smart Card reader does not show up in Device Manager

W520 Smart Card reader does not show up in Device Manager.
It was working before and now nothing. Nothing happens when SD card plugges in.
Could my smart card reader stop working or is this a configuration issue?
Any thoughts?
thanks
Ian

Hi Ian,
Welcome to the community, and thanks for the post.
The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
After that check if the issue get resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Printer does not show in Printer & Fax

My printer had a fit and in the attempts to fix it I managed to delete the drivers. After reinstalling the drivers from disc the printer would not show in the Printer & Fax ADD window.
In fact the only place the printer does show up is in the System Profiler.
The printer is a HP Officejey 6110 all-in-one and worked fine as a printer up to now.
It is connected to my IMac via USB the connections have been checked and the printer and computer have been shut down several times.
The printer will print the HP Utilities tests and shows in the system profiler so it cannot be a connection problem, the drivers have been reinstalled so that should not be a problem?
Does anyone know what I can do short of getting a new printer?
The system is an IMAC OS X Version 10.5.8 fully updated
Processor 3.06GHz Intel Core 2 Duo
Memory 4GB 800 MHz DDR2 SDRAM
Thanks Heaps for any help
Leonard husband of Belinda

Hi Paul;
thanks for the prompt reply I used the drivers fromthe OSX disc and reset the printing system 3 times even going to the extent of doing the reset and closing down the computer and the restasting from scratch. No luck at all for some reason the printer could not be found by the add printer function.
The wife dragged me out to the shops today and we ended up getting getting the HP Officjet 6700 Premium it and the MAC work fine together.
thanks for the help
Leonard

Bonjour does not show printer available for installation

I can print via Airport-Express when I'm using an HP Desk Jet 948c. If I connect the HP Office Jet G95 (purchased 2001) to the Airport-Express Bonjour does not show the printer as available for installation, but I can print with printer connected to the USB port of the notebook.

These may help.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html
iFelix

Printer does not show in Rendezvous in Preinter Setup Utility

I am using a G4 Ti 15" laptop usually connected wirelessly to an AirPort Extreme BS. Also connected to that BS is a desktop (ethernet), cable modem, and a HP LaserJet 2200 printer. If I connected the printer directly to the laptop, it prints. However, if I try to print wirelessly, it doed not work. In the Printer Setup Utility when I try to add a printer and select Rendezvous, the printer does not showup in the available list.

Erven,
Have you followed these instructions from the help pages of Printer Setup Utility?
Connecting to a network printer
If your computer is connected to a network, you can use the printers in your local area, including those that use Bonjour (formerly Rendezvous), AppleTalk, and OpenDirectory.
Open a document to print, and then choose File > Print.
Choose Add Printer from the Printer pop-up menu, select the printer in the dialog that appears, and then click Add.
The dialog lists shared, Bonjour, AppleTalk, and Open Directory printers. You may need to wait a short while before your printer appears.
If you don't see your printer, click More Printers, choose your printer's type from the pop-up menu in the dialog that appears, select the printer, and then click Add.
If the specific type of printer you're using is listed, choose that type. For example, if you're using an Epson AppleTalk printer, you may be able to choose Epson AppleTalk.
If you choose AppleTalk, another pop-up menu appears that lets you choose the AppleTalk zone for the printer.
When you select your printer in the Add Printer or More Printers dialog, Mac OS X finds the printer's driver and adds the printer to the Printer pop-up menu. If Mac OS X cannot the printer driver, "Driver not Installed" or "Gimp-print" appears in the model pop-up menu.
If you still cannot find the printer, it may be an IP printer, and you will need to follow the instructions for how to set up an IP printer.
Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them.
See also
Connecting to an IP Printing network printer
I can't print to a network printer
Good Luck
SF

Print Dialogue does not show print quality options on MacBook

I am trying to print wirelessly from my Macbook Pro to a HP 5500 connected to G5. I can print no problems, but I can't control the print quality as this option does not appear in the print dialogue box.
When I print the same page from my G4 powerbook I get print quality options in the dialogue. Both laptops are running 10.4.8 and connecting wirelessly by an airport network. The printer is plugged in the G5 not an airport express.

Hi there,
As Scapesuiter has mentioned, it would be best to check the HP web site to see if there is a Universal driver for your printer. These are drivers that have been written to work on the new Intel Mac's and on the previous Power PC (PPC) Mac's.
If there isn't a Universal driver, you can still use the older PPC driver, however you will experience problems like you are getting when printing from a Universal application via a PPC driver. Usually you see a line through the option that is not available, but I guess another symptom could be that the option is not viewable. Anyway, for some Universal applications, you can choose to open them using the Rosetta emulator. With the application closed, select its icon in the Finder and do a Get Info (Cmd - I). In the window that appears there may be the option "Open using Rosetta". If there is, select this option, close the window and open the application. Now try to print and see if the option is present.
Regards,
Paul

Printer does not show in printing options

I have installed adobe reader XI.. In the printing options my new printer is not shown.. all the old printers are available.. i can print in MS office, paint etc.. but the printer is not seen in Adobe Reader XI

No way for us to know for sure (without similar product/issues) but the
HP Support site suggests that with the current Mavericks OS X 10.9.x
their drivers should be available through Apple Software Updates:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Product-Support-using- Apple-Software-Updates-for-new-OS-X/td-p/3086229
However that may be limited to certain models of printers or scanners that
already had been known to be working under OS X as of that date in a
prior OS X (such as 10.8.5, 10.7.5, 10.6.8, etc) with earlier product support.
•Drivers and Downloads for Printers, Scanners, & More - HP Support:
http://www8.hp.com/us/en/drivers.html
A link to Mac OS X Support's List Printer & Scanner software (HP+ Other)
•OS X: Printer and scanner software available for download
HP Officejet t65 All-in-One Printer
{According to this page, your old printer has only Windows & Linux drivers
but you may or may not look into third-party driver support through such
sites as Gimp; though unlikely to be available with Mavericks, or Yosemite}
•HP Support Forum - Home:
http://h30434.www3.hp.com/psg/?lang=en&cc=us
You may be able to get a deal on a new printer as they are rapidly obsoleted.
PS: edit to add... there was a Gutenprint driver reference for T65 Printer here:
Mac OS X 10.5: Included printer drivers
Yet a driver for ancient Leopard 10.5.x may not be suitable for Mavericks 10.9.x
but the Gutenprint lead may be helpful to locate whatever may exist; or not.
https://www.google.com/?gws_rd=ssl#q=gutenprint+mavericks
Good luck & happy computing!
edited

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

A web wiget using java acript in my web site does not show up with Firefox but does with ie; how can I fix it?

I have inserted a java script web wiget on my web site by copy and paste. It works fine in IE (shows, updates data etc). In FFox it does not even show up and no error messages are given. If I look at the code in FFox, it is shown. Is there a problem with my web site or am I short something in FFox?

To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java

Using Firefox 4.0 Beta 4. When I open a link in a new window, the web address does not show in the location bar. Why?

When I open a web page link in "a new window" the link opens, but the web page information does not appear in the location bar. It is blank. If I open the link in a new tab, there is ho problem.
Further, if a open a link from the tab without a location in a new tab on the same window and then go back to the original tab, the location bar fills with the web address.
Have done this starting in several locations, so it not location dependent.

That behaviour is likely top be caused by an add-on, and in your case the likely culprit is IE Tab 2, the various versions of IE Tab have caused problems with Firefox 4 beta including issues with the location bar not being updated.
You can test to see if IE Tab 2 is causing your problem by disabling it and then seeing if the location bar in a new window shows the address. If it is not that add-on causing the problem, see [[troubleshooting extensions and themes]].
For info, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you may want to try that one instead. The latest version is available from http://coralietab.mozdev.org/installation.html

Using term set as refiner in content search web part does not show all used terms

When you create a terms set (12 terms with +/- 10-20 child terms) , attach it to a site column and allow multiple values to be selected the search service does not find all used values in the REFINERS tab of the content search web part.
Example:
Field ‘Tags’ is the term set which can be refined. We want to do this in the REFINERS tab of the content search web part.
Tags is containing following fields:
•Course document
•Poster
•ALS
•Before
•During
•CPR/AED I
In all libraries we used +/- 15 different tags already.
Example of a tag field in the library: "Poster;ALS;Belgium"
The problem is we can’t see all of the used tags in the refiners tab when you open it for the first time. (You can see Belgium or Cyprus is not in the list of tags.)
When you select one tag and add it as a refiner, the others eventually do show up. But never all of them together. It’s like he is only showing the most used (and maybe first selected?) tags first. I also think he might be having some trouble
with multi value selections in the tag field.
Does anyone else have the same issue as we do? And is there a solution already?

Hi Sasha,
According to your description, my understanding is that all the used terms cannot display in the Refiners in Content Search web part.
If the results display in the Search Result Preview, then the terms used in these results can be displayed in the Refiners tab.
I tested the same scenario per your post, and when I first opened it I can view all the terms which were used in the search results listed under owsmetadatafacetinfo.
I recommend to do a full crawl and then you can view all the terms used in the search results are displayed under owsmetadatafacetinfo.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

The printer does not stop printing

I have set up my printer (HP Color LaserJet CP1215) to my airport extreme; I have succeed to print to my printer. But the printer keep printing the same pages, and it prints continuously. Anybody know why this can be happened?

Hello hhartono. Welcome to the Apple Discussions!
I assume that you have this printer connected to the USB port on the AirPort Extreme Base Station (AEBS) ... correct? If so, does the AirPort Utility recognize it as the exact printer model?
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if the printer you are interested in is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Smart Web Printing does not show/print german special characters (äöü)

Similar Messages

Maybe you are looking for