(Smartform) Print grand total on the last page
Hi everyone,
I'm trying to print the Grand Totals on the last page of my Smartform. I have two pages - FIRST and SECOND.
What I did was I created a Text to display the grand total, and I specified that this text should be printed 'Only After End of Main Window'. However, the total is not being printed out.
I can't change the condition to 'Not on First Page', because my form has more than two pages, and I only want the grand totals on the last page.
Any help would be appreciated.
hi,
we have a window type called final window if u define this type window in second page . create a table in the window and go to calculations tab and define an internal table. i think u can get the grand totals.
if u want maore clearly go throuh this link
https://www.sdn.sap.com/irj/sdn/forums
hope this will help you.
REWARD ME IF USEFUL.
thanks,
gupta
Edited by: gupta pullipudi on Apr 9, 2008 9:23 PM
Similar Messages
-
How to display subtotals in every page and the grand total in the last page
Hello Abapers,
I am working with Smartforms. I am not able to print the subtotal in every page ie the Price for that particular page alone should be summed and in the final page I want the grand total also to be displayed. I tried the Total option in the Calculations tab but the value is just getting incremented on every page..How can I achieve this..
With Regards,
Bennet.Hi,
Declare two different variables for subtotal and total
Use them in the calculation tab of the table node.
After displaying the subtotal create a program lines node to clear the value of the subtotal. And dont forget to mention the condition in the condition tab of the text node of your subtotal as only before end of main window.
display the grand total in the text another text node with condition... only after end of main window.
regards
padma -
How to print a field on the last page of Smartform?
HI FRIENDS,
I NEED TO PRINT ONLY ONE FIELD IN LAST PAGE OF FORM SMARTFORM
HOW DO I CHECK last page. I tried WITH THE FIELDS OF TABLE
SYSF BUT NOT worked.
Thank you.
ROGERIO VAZHi,
Goto the conditions tab of that window and enable the check box for Only after the end of main window.
This will surely print your field in the last page.
try this and get back to me if any issues.
Regards,
Anand. -
Grand Total on the Header page
Post Author: RogerR
CA Forum: General
Say I'm created a multiple page estimate report. As all the labor and material costs are being created and added up.
Is it possible to put that Grand Total on the first page?
Can you process the report first to get the numbers then print the report? I guess this is what would need to happen.Post Author: SKodidine
CA Forum: General
If you summarize a field (not a running total) then you should be able to create the summary field and move it to the Report Header without any problems. This cannot be done if you use running totals for obvious reasons. -
Printing Footer Only on the last page of adobe Form
Hi Experts ,
I have a requirement of printing text only on the last page of the adoe Forms.
I know how to do this in Smart Forms , but being a novice in adobe forms i am unable to get the exact place to puth these conditions.
Please reply ASAP.
ThanksThanks .
Problem Solved.
Here is the Code snippet in Formcalc language that i used in the intialize event
var curpage = $layout.page ( ref ( $ ) )
var totpages = $layout.pageCount()
if ( curpage ne totpages ) then
$.presence = "hidden"
endif -
How to print a field on the last page of Smartform with more of 2 pages?
HI FRIENDS,
I NEED TO PRINT ONLY ONE FIELD IN LAST PAGE OF FORM SMARTFORM
HOW DO I CHECK last page. I tried WITH THE FIELDS OF TABLE
SFSY BUT NOT worked.
The form has more of 2 pages.
Thank you.
ROGERIO VAZHi ,
You dont have to hard code anything to achieve this functionality,
just create a window and in that window define a text element to print
that variable.In the conditions tab of that window check the check box
"only after end of main window".i think you might have used a main window,
so irrespective of the no of pages the smartform prints,it always displays that
field in the last page of the smartform.
regards,
srikanth. -
How can I print a label on the last page of the report in the margin
I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works.. -
How to print a label in the last page of the report
Hi, I have a report af bottom page I trid to put a label, the label is in the margin, but when I change the print condition send me a error, illegal print condition, how can I print this label only in the last page at the botton of the page
ThanksHerbe,
You can do this using format trigger
Please see the building reports manual / Tutorial for details
at http://otn.oracle.com/docs/products/reports/content.html
Thanks
The Oracle Reports team -
Printing Grand Totals in Footer along with page total
Hi
I have a report which prints PO Header and PO Lines. For each page while iterating thru PO Lines I print page total in the footer.
Once all PO Lines are printed with page totals in the footer of each page, I want to print Grand total in the last page in the footer along with last page total. Currently my XML data has pre-computed grand total in the PO Header block.
The problem
I have wrapped header and lines inside <?start:body?> and <?end:body?> which allows me to print page totals outside the <?end:body?> tag.
I print page totals and "Continue" next to it in the footer. But
Finally when grand total comes into picture in the outer loop I want to replace "Continue" text with grand total value in the last page and print it as footer.
I tried to use xdoxlt:set_variable() function to flag a variable value to 1 when iteration happens in HEADER block and set it to 2 in inner loop of lines block. But the scope of the variable is confined between <?start:body?> and < ?end:body? and is not visible outside the <?end:body?> tag.
The logic I want to accomplish is
if var = 1 then
print page total and "Continue"
elsif var = 2 then
print page total and Grand Total.
end if
This logic doest work as the value of var is not visible outside the body tag.
I want to use this variable value to print footer which lies outside <?end:body?> tag with grand totalor page total
Please suggest if there is any other way I can accomplish this functionality. Can we use parameter and update it. Syntax for update parameter value is not clear in user guide.
Any help would be appreciated.
thanks
sukarnathanks for the info, i was trying to avoid this but had already reached the same conclusion.
everything else seems to be very time consuming and may not work correctly in the end.
we're on Oracle Applications : 11.5.10.2 which has just been converted to utf-8 and is an Oracle On-Demand installation.
do you know if 5.6.3 of the publisher is supported and any ideas on how difficult it is to get it installed?
cheers
ellen -
Print a line on the last or second from last page
I'm using Oracle Report 10.1.2.3.0.
I'd like to print a line on the last page of a report if the report has an odd number of pages or the second from last page of a report if the report has a even number of page. It is the later second from last requirement I'm struggling with. Can anyone help me solve this problem please?
The reason for this is that we are purchasing an envelope inserter that using Optical Mark Recognition (a series of lines on the side of the page). This only reads on the front side of a piece of paper, so when performing a duplex print the marks need to be on the odd page numbers. In this case I need to apply a mark on the front side of the last piece of paper.
ThanksHi InoL
Thank you for your response. I have seen similar solutions to this and have investigated them. Although they give you a work around to know the total number of pages in PLSQL, they only give you a way of knowing this once the report has completed formatting the last page. Unfortunately, my requirment is to know when I'm on the second from last page to perform some conditional formatting. I don't think knowing the total number of pages at this stage is going to be possible in reports, therefore I was hoping someone may know a "clever trick" to achieve this.
Thanks
Neil -
How do you make it print first page first and not the last page first?
I have a HP Officejet Pro 8600. How do I make the first page print first and not the last page printing first?
Hi,
From the application used to print open the print dialog and click Oroperties or Preferences to access the Printing Preferences screen.
From the Layout tab set Page Order as Back to Front, then the first page will be printed first.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How to Indentify the last page of output
Hi All,
I'm customizing the AR Invoice Report using XML Publisher. This report output can have more than one invoice.
If an invoice has more lines and output is more than one page, I have to print the following information only on the last page of an invoice.
1. Printing Remittance information at the bottom of the last page
2. Invoice totals only on the last page of an Invoice.
3. Printer marks to indicate the last page. Last page will have 3 small lines and all other pages will have 2 lines.
To be more clear, if an invoice has 25 lines and first page can print 20 lines and the second page 5 lines. The remittance information and totals have to be printed on the second page. The first page has to have blank space at the same position.
I need not to print an additional last page.
I have page break after each invoice so that the page number is reset.
Is there a way to identify the last page of in the report? I have found out that we can access the page number using the tag <?fo:page-number?>. However I could not find anything to identify the number of pages or the last page.
Please let me know if you have any suggestion regarding this. It will be very helpful.
Regards,
VijayVijay,
you need not check for the last page of the output. Pl go through 'Last Page Only Content' secton on 2-48 of XML Pub guide 5.6.1.
I had very similar requirements and i achieved it by following the above info. One thing we should be careful of is: When we make some change in the content of first page, we should do those changes in the last page if the same content exists in the last page!!
Hope it helps.
Venkatesh N -
How to display amount in words in the last page
Hi,
I am very new to Oracle Report, but v.good experience in Crystal report.
How can i display amount in words for an invoice amount total in the last page of the invoice and after total amount. I created a new non repeating frame and put the amount in words inside that, and set the frames diplay property Print on Last Page, but the problem is already there is a repeating frame to print all the invoices item, and the total in figure. But the amount in words frame is not always coming after the total amount,either it should be at the bottom of the last page in fixed position, otherwise it should move just below the total amount.
I am using Oracle 11g.
Thanks in advance...
FslHi ,
Use This function
create or replace FUNCTION xxg4_zen_conv_words (p_amount IN Number) RETURN Varchar2 IS
--Creation Date : 11-DEC-2009
--Purpose : This Function returns amount in words.
--Parameters :
--1) p_amount : Only positive and negative values are allowed.
Precision can be entered upto 10 digits and only 2 scales
are allowed e.g 9999999999.99
-- Index by Tables to store word list
TYPE typ_word_list IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_list typ_word_list;
TYPE typ_word_gap IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_gap typ_word_gap;
-- Local Variables
v_amount Number := p_amount;
v_amount_length Number;
v_words Varchar2(10000);
v_point_found Varchar2(1) := 'N';
v_point_value Number;
BEGIN
/*Getting value after point if found */
v_point_value := SUBSTR(v_amount,(INSTR(v_amount,'.',1) + 1),2);
/*Checking whether amount has any scale value also */
v_point_found := CASE WHEN (INSTR(v_amount,'.',1)) = 0 THEN 'N'
WHEN (INSTR(v_amount,'.',1)) > 0 THEN 'Y'
END;
/*Converting amount into pure numeric format */
v_amount := FLOOR(ABS(v_amount));
v_amount_length := LENGTH(v_amount);
t_typ_word_gap(2) := 'and Paise';
t_typ_word_gap(3) := 'Hundred';
t_typ_word_gap(4) := 'Thousand';
t_typ_word_gap(6) := 'Lakh';
t_typ_word_gap(8) := 'Crore';
t_typ_word_gap(10) := 'Arab';
FOR i IN 1..99
LOOP
t_typ_word_list(i) := To_Char(To_Date(i,'J'),'Jsp');
END LOOP;
IF v_amount_length <= 2
THEN
/* Conversion 1 to 99 digits */
v_words := t_typ_word_list(v_amount);
ELSIF v_amount_length = 3
THEN
/* Conversion for 3 digits till 999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(3);
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2));
ELSIF v_amount_length = 4
THEN
/* Conversion for 4 digits till 9999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,2,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2));
END IF;
ELSIF v_amount_length = 5
THEN
/* Conversion for 5 digits till 99999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,3,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2));
END IF;
ELSIF v_amount_length = 6
THEN
/* Conversion for 6 digits till 999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,4,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2));
END IF;
ELSIF v_amount_length = 7
THEN
/* Conversion for 7 digits till 9999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,5,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2));
END IF;
ELSIF v_amount_length = 8
THEN
/* Conversion for 8 digits till 99999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,6,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,7,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,2));
END IF;
ELSIF v_amount_length = 9
THEN
/* Conversion for 9 digits till 999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,7,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,8,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,2));
END IF;
ELSIF v_amount_length = 10
THEN
/* Conversion for 10 digits till 9999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(10);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(8);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,8,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,9,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,9,2));
END IF;
END IF;
IF v_point_found = 'Y'
THEN
IF v_point_value != 0
THEN
v_words := v_words||' '||t_typ_word_gap(2)||' '||t_typ_word_list(CASE WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 1 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)||'0'
WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 2 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)
END);
END IF;
END IF;
IF p_amount < 0
THEN
v_words := 'Minus '||v_words;
ELSIF p_amount = 0
THEN
v_words := 'Zero';
END IF;
IF LENGTH(v_amount) > 10
THEN
v_words := 'Value larger than specified precision allowed to convert into words. Maximum 10 digits allowed for precision.';
END IF;
RETURN (v_words);
END xxg4_Zen_Conv_Words;
--Thanks
SAGAR SANKPAL -
Print Terms & Conditions in the Back page in Sapscript
Hello Experts,
I need your help.
I have one sapscript. I want print Terms&Conditions in the back page.
My Sapscript is a copy of MEDRUCK.
I want: When NACHA = 1 --> Print Terms&Conditions on the reverse side of each page.
When NACHA = 5 --> Print Terms & Conditions in the last page (Not in the back).
I did one example of sapscript with only one page First. I created a second page Back.
The first point at Back and has the print mode 'D'.
The Back point at First and doesn't has any print mode.
My problem is:
1- Always, i have the last page without Back page. Always i have an odd number of pages. Normally i must have a peer number. Each page has the back page. But, is not the result.
I tried to call NEW-PAGE BACK at the end of the last page First like that:
If &NEXTPAGE = 0&
NEW-PAGE BACK
Endif.
But doesn't work. NEW-PAGE works only in the Window Main and &NEXTPAGE& = 0 works only in a window not main. So, i can't use them at the same time, in the same window.
Can any one help me please? I'm blocked and i can't resolve the problem?
And what i must do for NACHA = 5?
Thank you.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 4:59 PMHi,
This problem is caused by the printer which does not understand the sapscript page commands. Basically you need to embed printer specific commands for controlling output so that on particular conditions the output in printed double sided for the first 2 pages then each page single sided.
This is not easy, and can change depending on the printer being used. I would not recommend this type of action in SAPscript or SMARTforms.
Cheers
David Cooper -
Adding subtotals from 3 pages to a total in the 3rd page
I am using Adobe Designer 6 and have 3 pages that use FormCalc to do the calculations. I have subtotals on each page. I need to be able to take the subtotal form the first and second page and add that to a subtotal on the third pageto get a grand total on the third page. Can someone please help. Also please keep this simple. If you have a sample, I should be able to figure it out. This is what I have been working with. I know part of it is wrong. costa is the subtotal on page 2 and costb costc and cost2(grand total) are on page 3.
cost2 = costb + costc+(form[0].page[2]+costa+)
Thank you.On the calculate event of cost2 you can use script like:
Sum(costb, costc, formName.page2Name.costa)
Chris
Adobe Enterprise Developer Support
Maybe you are looking for
-
Win 7 Pro chipset drivers for dc 7100
Hi I have a dc 7100 small form factor desktop running XP Pro. I wish to upgrade to Win 7 Pro but Windows Advisor says my chipset is not compatable. When I go to the HP download site for drivers the only drivers on the list are dated 2005. Where can I
-
Application Crashes when writing to TDMS
My application written with LabVIEW 2009 (9.0.1) crashes occasionally when writing to a tdms file. The application logs data to a tdms file at low sample rates (~1/min). Attached is the error information. Could my error be related to this thread.
-
Somehow the settings changed so the search results page has text so small that I can't read it
when I launch firefox the initial page is find. I type in a search phrase, and the search results page comes up with print so small I can't read it. I can't find any way of changing the "view" of the results pages.
-
Making a commandButton's action dependant on a javascript function's result
Hi guys, I have a command button "Login". I have a managed bean "userLoginInfoBean" with session scope whose "loginToSystem" method I want to call when user clicks on Login button. <h:commandButton id="loginButton" type="submit" value="Login" style="
-
My photo want sync and my you tube doesn't work after update and my battery drains fast.
this new update doesn't work like i should work my photo doesn't upload my you tube doesn't work & my battery drain faster than ever now