Smartform print out orginal and duplicate

Hi,
Can any one tell how to obtain orginal and duplicate copy in smartform for the single invoice ie 2 copies one original and duplicate. And in printout it has to print orignal and in another  copy

Hi,
See below Code, Ask your Technical team to do  like below for radio button appearing in selection screen.
SELECTION-SCREEN BEGIN OF BLOCK frame1 WITH FRAME TITLE text-001.
   SELECTION-SCREEN BEGIN OF LINE.
     SELECTION-SCREEN POSITION 15.
     PARAMETERS: r1 RADIOBUTTON GROUP rb .
     SELECTION-SCREEN COMMENT 20(77) text-002.
   SELECTION-SCREEN END OF LINE.
   SELECTION-SCREEN BEGIN OF LINE.
     SELECTION-SCREEN POSITION 15.
     PARAMETERS: r2 RADIOBUTTON GROUP rb.
     SELECTION-SCREEN COMMENT 20(77) text-003.
   SELECTION-SCREEN END OF LINE.
   SELECTION-SCREEN BEGIN OF LINE.
     SELECTION-SCREEN POSITION 15.
     PARAMETERS: r3 RADIOBUTTON GROUP rb.
     SELECTION-SCREEN COMMENT 20(77) text-004.
   SELECTION-SCREEN END OF LINE.
*  SELECTION-SCREEN BEGIN OF LINE.
*    SELECTION-SCREEN POSITION 15.
*    PARAMETERS: r4 RADIOBUTTON GROUP rb.
*    SELECTION-SCREEN COMMENT 20(77) text-005.
*  SELECTION-SCREEN END OF LINE.
*selection-screen function key 1.
*selection-screen function key 2.
SELECTION-SCREEN END OF BLOCK frame1.

Similar Messages

  • Smartform print out problem : urgent

    Hi,
    I have developed a smartform to take the printout of the Sales Order created in VA01.
    I am facing a problem while taking the printout only if the line item in the sales order are more than 25.
    I the line items are less than 25 then I am able to see to the print preview as well as able to take the print out but if the item are more than 25 then I am not able to see the preview also and even able to take the print.
    Kindly anybody suggest
    Regards,
    shyam,

    hi shyam..
    Remember one thing u <b>always give the first page--> next page will ber first page only.. in u r requirement</b> (because in the firtst u r printing the item details, who knows there colud be chances of items may not fit in 1 page so when the items are more it will give proble if u give the first page next page is second page)
    do as follows-- you have 2 pages PAGE1(first page) PAGE2)second Page).. now
    1..in PAGE1's give the  next page as PAGE1, in the PAGE2 give the next page as PAGE2.
    2.. After competion of printing the ITEM details u need to print the ITEM COnditions.. so we will trigger the second page explicitily by using the COMMAND after completion of first page..
    for this--> at end of the main window <b>right clice > create>flow logi-->command</b>.
    now command widow will be inserted.. in this tick the GOTO NEXT PAGE :inthis give PAGE2. in condition tab of the COMMAND "tick only after end of Main Window.
    Please wite if u r proble m is not solved..
    Please Close this thread.. when u r problem is solved
    Reward if Helpful
    Regards
    Naresh Reddy K

  • Smartform prints out  Black boxes instead of Shade

    Hello Experts,
    I have developed some smartforms which have some boxes that are shaded with grey color for heading.
    They work fine for some existing printers. But when i issue a print out on a new printer i
    see that the shaded boxes are displayed as solid black boxes on the print out.
    I also tried to print it in color but invain. Even the LOGO also got blacked out.
    Can any one suggest me what to do.
    Is it with my smartform or printer settings. Please advice.
    Thanks
    Dany

    Hi
    I don't know if u can't find out a solution.
    All device output (printers) having the same divice type have the same behavior, i.e. printers having a different device type can give a different output, so if u'll correct the problem for a certain group of printers u could have a new problem for other group.
    I think the best soltion is to use the printer used to test the smartforms
    Max

  • Are you able to print out history and if so, how do you do it?

    I would like to print out one day of history showing the site or page visited. Is this possible and if so, how?

    You can try this NirSoft utility:
    *http://www.nirsoft.net/utils/browsing_history_view.html BrowsingHistoryView
    More:
    *http://www.nirsoft.net/utils/

  • Smartform print out

    hi all
    i created a standard text with some part in bold .
    now when i am using ths standard text in smartforms they are nt comin bold whereas in print preview at standard text they are coming bold .
    can anybody suggest somethn
    regards
    navjot

    Hi,
    Just check out in ur paragraph font size...there must be a mistake there....or else there is a problem in ur GUI so just check it out..
    with regards,
    madhuri.
    if useful reward with points...

  • Smartforms print out problem

    hi all
    i am priniting a smartform with logo the problem is i a getting inverted logo where as verythn else id gd.
    can anyone suggest me what is going wromg
    regards
    navjot

    Hi
    Check the same printing in another printer
    because sometimes it will happen due to printer also.
    So check and confirm it
    and also check the resolution of the graphic technical settings and the output options in smartform
    see the steps correctly
    1)     In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
    2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
    3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
    4) Select any picture and set its Resolution in DPI
    5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and   position of the Logo
    6) Set any other parameters if required, save and activate.
    7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
    8) Use  TCode SE78 to upload new pictures and logos.
    look at Thread Dynamic Graph in smartforms
    Refer the links also -
    Re: Dinamic Graph in smartforms
    How to get file perperties in Unix server
    Reward points for useful Answers
    Regards
    Anji

  • ¿Why Print out message in Migo get duplicateg when event 4 in MN22 is selected?

    Hello,
    I am not able to find out why the print out message get duplicate when I change event 3 to event 4 in MN22.
    when I do Good issues in MIGO and the message "ZVAL" is set in event 3 "Send with application own transaction" only one type of message is been trigger in , but if I change event 3 to 4 "Send immediately (when saving the application)" in MN22 all the message get duplicated.
    Thanks
    Jorge G

    Hi,
       If you are using your own program in the processing routines for output type, then change it to standard program and form routine in NACE  as shown below and test the scenario again. Also check whether any routine is assigned against the output type in the procedure - if so, remove the routine also.
       Revert back with the result. If its working fine in this case, you need to check the custom program with the help of your technical team.
    Regards,
    AKPT

  • Why Does iPhoto 08 Crop Print Outs ???

    Hi. I would appreciate a little help here.
    I am trying to print out some 8" x 10" photos with borders, in landscape paper orientation, using an Intel Dual Core iMac, Mac OS 10.4.11, iPhoto 08 ver 7.1.2, approved HP Printer and HP Driver, on 8 1/2" x 11" HP Premium Photo Paper, at maximum dpi.
    File resolutions are generally:
    1600 x 1200 (2 Mega Pixels, 4:3 image aspect ratio, 395 KB file size),
    2048 x 1536 (3 Mega Pixels, 4:3 image aspect ratio, 790 KB file size),
    2560 x 1920 (5 Mega Pixels, 4:3 image aspect ratio, 2.2 MB file size), and
    3264 x 2448 (8 Mega Pixels, 4:3 image aspect ratio, 3.6 MB file size).
    The problem I'm having is that iPhoto prints the photo by cropping approx 1/4" off the left side and 1/2" off the right side of the screen image without indicating there will be any loss of image content. The screen image DOES NOT accurately reflect the printed image.
    Like most people that take pictures, I frame the shots the way I wanted the picture to look. In a picture of a family reunion the person on the far left would have half his head and body chopped off (missing) while the person on the far right would be totally cut out (missing). What I see on the screen IS NOT what I get when printed out. And of course, it does this consistently without warning. Why?
    I would accept uneven borders, but want the entire picture to print. Something I would have thought to be the default settings for iPhoto when printing "with borders." Foolish me.
    I understand some cropping might have to take place when printing "border-less" printouts, but not for those "with borders." There out to be a law against doing this without conscent.
    HP PhotoSmart will do this for me, but it's rather a hassle to have to transfer pictures over each time I want a satisfactory print out.
    How do I get my pictures in iPhoto 08 to print out "entirely?" Dare I say "normally?"
    Have tried many settings changes in iPhoto and Preview to no avail.
    Please help.

    Hi LarryNH,
    Thanks for your timely reply.
    Ok, let's do the math. What the heck?
    Pick out a photo in your iPhoto library that you can view and print out in Landscape View.
    Preferably a photo that you can instantly recognize the border changes in, or with rulers or grid lines. If possible, let's make it an image with a 4:3 ratio too.
    Chances are you will be able to see the entire photo on your screen — even though your screen mostly likely is not one with a 4:3 image aspect ratio (pixel Width divided by pixel Height). Hmmmmmm.
    Now print out the photo using iPhoto 08, letter paper size with borders. (Save yourself some ink by choosing the lowest dpi or fast printing)
    For me, actual image size was 10 1/16 "W by 8 1/4 "H. The letter paper size print out has a 5/16 " border on the left and a 5/8 " border on the right (not centered, even though it's supposed to be). Both top and botton borders measure 1/8 " (centered, like its supposed to be).
    Notice any chopping off of the image on the left and right sides when compared to the screen image? Hmmmmm.
    When I print the same photo using HP PhotoSmart
    For me, the actual image size is somewhat smaller: 9 13/16 "W by 8 3/8 "H. The letter paper size print out has a 9/16 " border on the left and a 10/16 " border on the right (approximately centered). The top border is 1/2 " and the botton border ise 9/16 " (again, approximately centered). BUT MOST IMPORTANT, the image of the photo I see on the screen is "entirely" present on the print out.
    The original photo has a 4:3 (or 1.3333) image ratio (4 divided by 3).
    Apple is printing out an incomplete horizontally uncentered image with a 1.2197 ratio (10 1/16 "W divided 8 1/4 "H).
    HP PhotoSmart is printing out a complete image with a 1.1716 ratio (9 13/16 "W divided by 8 3/8 "H), but at least it is a complete image and it is approximately centered.
    Besides Larry, I bought a Mac. I shouldn't have to do the physics and math. Apple should be, thus making life easier for you and me. I hope they're listening.
    I have been totally unable to coax a complete image out of iPhoto, let alone one properly centered.
    I have been trying to print photos from Events. I'm going to try one from Albums next.
    If you find a work around in iPhoto, please let me know. With borders it is do-able, as HP PhotoSmart has proven. I just wish iPhoto could do the same.
    Got-A-Question

  • I have a hp psc 750 why does my second sheet come out first and the second sheet comes first

    I have a HP PSC 750 printer and when I type a message 2 sheets long, the second prints out first and the second sheet comes out first, can you help? 

    @paddyv, Welcome to the Community!
    You should have the option in the program you're printing from, to change the page order. Check the settings in the program.
    If you cannot find the options, please let me know which program and operating system you're running and I will have a look in to this for you.
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Firefox only prints out a portion of my billing statement, but it prints correctly in Internet Explorer. How do I format or change settings in Firefox to correct this problem?

    My Account Activity page for my checking account has an eight column listing ie: date, type, description, debit, credit, balance, etc.
    Only the first five columns print out regardless of how much I scale the printing size down. It prints out fully and correctly when I use Internet Explorer browser to view the bank website.

    I've encountered a similar problem with HTML email sent from Outlook once before. I had to manually edit the HTML file and then display it in my browser and it printed fine. I don't recall the exact problem, but it had something to do with malformed HTML tags. Whatever they used to generate the HTML document, it was putting in bad tags at the ends of lines (like to force a line wrap) and when printed, this would instead function as a cutoff of the right side of the text. (the HTML parser in FF - in my case Thunderbird, would simply ignore everything after these bad tags, as it probably should)
    If you don't know about HTML find someone who does that you trust to look at the document and manually edit it for you. Someone familiar with basic HTML should be able to spot and fix the problem in about 5 minutes. Short of that, see if your bank can send them via email in PDF instead, but regardless be sure to inform them their documents are not created properly. The problem is most likely on their end, not yours, and not with FF.
    EDIT-------------
    Just remembered something.
    There are two add-ons you might be interested in:
    IETab - it uses the Trident web engine to display the web page. (what IE uses) It should essentially work just like IE, but from within FF.
    User Agent Switcher - I use this more frequently as all it does is tell the webserver that I am using IE and not FF. (even though I am using FF) and voila! I get the page delivered correctly with all intended functionality. (Odd, I know - chalk it up to lazy and ignorant web developers)
    Both may be of use to you, the second is more secure, and either should be a work around to solve your problem that won't involve editing or knowing HTML.

  • TS4118 When I print out my ical calendars, there are three duplicate events happening every day of the week and I never entered this event?

    When I print out my calendars from ical, there is one event that is reoccurring 3x/day/every day of week! It is not showing on the actual calendar and I cannot figure out how or where it's coming from? It's in the calendar marked Jimmys action which just shows my sons activities and for this activitiy, I put one day with a recurring weekly on just two days of the week at a specific time and this is showing up as well and correctly? What should I do to remedy this?

    UPDATE: I think I found the answer to my problem. I travel between two time zones and recently started listing event times as "floating" so they don't get messed up when I travel between west and east coasts. It seems that when I want to print out a calendar sheet, the time of the event doesn't show up if it's a "floating" event. So, I need to go back to putting a time zone in and turning off "time support" in Preferences for iCal. BTW this (in reverse) is a solution for those who don't want to see appointment times printed out – make it a "floating" event.

  • Font in print out of smartform

    Hi All,
    I have uploaded a font and it is maintained in both Font & Printer Family. I have created a STYLE for the font and using the same in my Smartform.
    When i see the preview of the Smartform, the font is displayed large + Bold ( as per our requirement).
    But when i take a print out, a small size font is printed.
    Any pointers for the same would be helpful.
    Ps. : The font is printed correctly when logged on with EN language but when logged on with JA language then it doesnt print correctly though it displays correctly in print preview.
    Best regards,
    Prashant

    Hi,
    The settings mentioned by Kishan are already in place. Still it doesnt give the desired output.
    Also, this is a new Form created in English language.
    I have tried the existing fonts as well as uploading fonts, but still no +ve results.
    Also, could someone please explain, why the font through STYLE can be entered only of max size 99.00. But in PRINTER the font for 120,160 is also maintained.
    Thanks,
    Best regards,
    Prashant

  • Could u tell me how2control printing out the certain page in smartforms?

    there are many pages when I preview ,
    but I only need one  or several of the pages.
    How to print the certain page in smartforms?
    and if there are several windows in one page
    how can I just print out one or several windows of them?
    what should I insert "command" or "program lines" into
    the "flow logic" ?
    It's very kind of you to explain that in detail.
    Thanks very much in advance.

    pls help me,thank you

  • Font for Print out and Print Preview

    Hi all,
    I am working in SAP R/3 4.6C and using SmartForm.I have a trouble :
    I uploaded  Arial Font into System Font and Printer Font and i want to use this font for print out and print preview.But this font is only applied for print out and the print preview uses still  Courier Font not Arial as I want.
    So, anybody tell me why and give some idea to solve this problem.
    Thanks .

    Hi,
    There is no  arial font option in 4.6..but it 4.6 scriptforms arial option is there,but  it will not work..it will give some other font...
    Mainly  4.6 version does not support ARAIL font..
    4.6 does not support all the fonts which are avilable in MS-WORD..only few fonts are uploaded into SAP 4.6 syatem...this is the problem
    Regards
    Kiran
    Edited by: Kiran Saka on Feb 11, 2009 8:19 AM

  • How to avoid that every page of a smartform is going to be printed out

    Hi,
    I have following problem. In my smartform I builded different pages (like a cover page, different lists etc.). The user should decide by setting parameters what lists he want to print. So if he don´t need the cover page, it should not be printed out.
    Is there any way to set this up in the smartform? Right now, the printing parameters (what the user wants to print) are stored in an internal table and should be processed in the smartform. My problem is that there is no way to implement conditions on a page in a smartform.
    Please let me know if somebody has a solution for this requirement.
    Thanks a lot,
    John Caspar
    <MOVED TO CORRECT FORUM BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 15, 2009 8:49 AM

    Hi Micky,
    The external debugging works. Thank you very much!
    And how can I reward you?

Maybe you are looking for