SmartForms Styles

Hi all,
I have modified a smartform and incorporated some new logic in it.i have also unit tested it in DEV and its working fine.But in Quality its saying as smartforms Style not found.i have checked it in the smartform output properties,the style mentioned in my smartform is not present in the Quality.should i also trasport the smartform style into Quality?if so plz tell me how? or plz do suggest me what i can do to avoid this error?
Thanks in advance.

hi
If you have saved your style as a local object,
for assigning the style to a request create a new package. then go to the initial screen of smartforms. enter the name of your style and select object directory entry from the goto menu. Assign the style to your new package.
once this is done go to se09; create a new request; and assign your style to this request
Hope this sorts out ur problem
Message was edited by:
        Roshan Basheer

Similar Messages

  • Smartform Style Shared Among Other Forms?

    Dear forumers,
    Do you know where can i check whether a particular 'smartforms style' is shared among other forms? Thanks.

    goto smartforms  and check the smart style or check tables STX*

  • Smartform style  problem

    Hello friends,
         I am getting problem in smartforms style. i had created my own style for one of my Tax invoice form because i want fonts in smaller and for heading i want to increase font size. But when i am applying my own style to paragraph the changes are not accepted after SAVE & ACTIVATION. If any one know solution for this problem than please give reply as soon as possible.
    Thanx & Regards,
    Rahul Talele

    Hi,
    Once I came across the problem as yours.
    This happens becoz certain properties of the fonts when applied will override other formats.
    For eg. If u have chosen bold character format before, but when u want to change it to normal it will not change at all.
    In that case, I have deleted the text as a whole and applied normal format at first. Then I applied bold character format
    whereever applicable.
    Which style u applied to the header in your form? Is it Paragraph format or Character Format.
    Could u give more clear description?
    Regards
    Vadi

  • How to Create trasport Request's for Smartform Style?

    Hi All,
    Can you plz tell me how can i create a transport request fro Style?in which transaction code should i do that? the style name which is mentioned in my DEV is YEHPP_IES.plz let me how i can do this?
    Thank you very much for your Response.

    Transports are created for Smartform Styles by creating or changing the style in transaction Smartforms.
    If you want to transport a style without making changes then you can:
    1.  Go to Transaction SE10
    2.  Create a new workbench request
    3.  Double click on the new task created to get into the object list
    4.  Add an entry for the style.  Program ID = R3TR, Object Type = SSST, object name = <smartstyle name>.
    5.  Ensure you lock the entry in the transport request
    Regards,
    Chris

  • How to change the development of a smartform styles

    Hi all,
    I have saved my smartform  styles to locl , how can i assign the smartform styles to a development class,
    Thanks
    J

    Hi,
    In the Initial screen of the SMARTSTYLES trnasaction code, Goto --> Object Dictionary Entry, then it will ask the po up to change the Package .
    Pease close the thread
    Regards
    Sudheer

  • Problem with Smartform style

    Hi all,
    I created a smartform for barcode labels printing. The form has its own style and characters and paragraphs use a
    custom font (it's a Windows font I uploaded in the system).
    My smartform worked well, but when I newly tested it yesterday, only the barcode and a field were displayed.
    The only difference I noticed is the fact I deleted some custom fonts of mine and, after the deletion, I don't
    tested anymore the smartform until yesterday. In fact if i try to print the fields without any custom style, they
    are displayed in the preview.
    Thanks in advance,
      Francesco

    Problem solved (in a strange way): I had to modify my style by setting the black color for all the paragraphs and characters.
    Usually the color should be black by default, don't you think?
    I have to clarify that in my style there's a paragraph with the white color to give a light and shade effect: I don't know if this could be the cause of my problem.
    Edited by: Francesco Negri on Feb 10, 2011 10:05 AM

  • Smartform Style Issue

    Hi Experts,
    I have uploaded a smartform and its style. When I am executing this  the style is no effect to this smartform. I am already check in form attribute->out options -> Style is there. I am also check the style is activated but it is not reflecting to the smartform when I am executing.
    what will be the problem I am unable to find. Please relpy me where the problem is arrising.
    Thanks,
    Sanjeeb.

    Hello,
    in order to know your paragraph format and character format assigned or not, please do as below
    select the entire variable then you can find you Paragraph and character formats just above to the text element.
    or if you change editor tyou shoud get as below.
    paragraph fomrat <Character format>&Variable&</>

  • Converting SAPSCRIPT Styles to SMARTFORM Styles?

    Three questions:
    1) How do I find the SAPSCRIPT STYLE that was used for an older original SAPSCRIPT that I converted to a SMARTFORM?
    2) Once I run SMARTSTYLES conversion will all the text output in the new converted SMARTFORM be automatically formatted correctly?
    3)Should I have converted the style before converting the form?
    It seems too easy, but I am having trouble finding the style of the original SAPSCRIPT form to convert to SMARTFORMS. Of course a lot of my output is misaligned.
        Thank-You.

    Hello Amit and Thank-You. I am beggining to believe that converting SAPSCRIPT to SMARTFORM may not always be worth the effort. We have many old SAPSCRIPT programs, that are full of unstyled character and paragraph formats, that would all need to be checked. because it looks like the formats do not always migrate, because they are not defined i the new SMARTFORM?
    Would you agree?

  • Generate PDF from SmartForm Style Problem

    Hi everyone,
    I am a starter at ABAP.I made document with SmartForms.There is a 3 pages.According to Table Information SmartForms tables can be changed. I coded a how to transfer informations to pdf. My problem is  the field values included 'ğ,ş,i' letter.But this letters doesn't shown in pdf.This letters show like a 'X' .  How can solve this problem ?

    Hello,
    Firstly you need to check if the correct fonts used in the form.
    You can check the SAP note:
    776507 SAPscript/SmartForms: Which fonts for which languages?
    Also check if you are using the correct device type for the PDF output, if your system is a unicode system you can use
    device type SWINCF or PDFUC as per SAP notes: 812821 and 999712.
    Regards,
    David

  • Transporting Smartform Styles

    Hi Everyone,
    I have a query that I hope someone can help with. Basically I've have a smartform and am using a smartstyle to format the text to Times New Roman Size 9. This is fine
    When I transport the changes (all objects for smarform and smartstyle are in transport) to our Quality Assurance System - the changes come across fine - The text format is correct and all the alignments on the form are correct.
    However once this transport goes to teh Pre-Production system for more testing the font is coming out as Arial which then causes the alignments to be incorrect.
    I have searched everyway but cannot see any differences between QAS + Pre-Production and dont understand why it's not transporting in the same way.
    Has this ever happend anyone else ? Any suggested solutions would be most welcome and very much appreciated.
    Thanks alot.

    hi,
    I have come acrossed the same problem in aliignment of windows. Just activate the smartform once again in production. Ur problem will be solved.
    Otherwise change in production, if u can do it.

  • Migrating from Sapscript Paragraph Format to Smartforms Style

    There are some tool to export paragraph formats?
    Thank you

    Hi,
    Goto SMARTSTYLES Tcode..in Menu..
    Utilities--->Convert SAP Script Style..
    and Give...
    From (SAP Script Style)----
    To(SMART Style)----
    Message was edited by:
            Vishnu Reddy

  • How to change predefine bar code size in smartform style

    hi,
    in smartstyles--character setting, when we define barcode, there is one bar code "BC_C128B" with width 9CM. May i know how to change it into smaller size. Thanks.
    regards,
    BK

    Try this:
    Go to SE73 transaction code
    Look for the barcode you want.
    Go to edit mode make a copy of this.
    change the width and height to the one you want.
    Attach this new barcode in the device type you are using in printer barcodes button in SE73
    In the prefix - create a new printer control eg. SBP99
    in the control sequence part:
    eg.
    BY2,3.0,80BCN,,N,N,N,N^FD>9
    The 80 here corresponds to 1 cm height. This is in DPI and depends on the zebra label printer default.
    Download ZPL II programming guide in Zebra website to give you more details on the commands to use.
    Hope this helps.

  • Smartform Style paragraph formats - Number Chaining not working

    Hi
    I have created two paragraph formats L1 (level 1) and L2 (level 2). L1 is the top outline paragraph and L2 is its child. They both have a list numbering type of 1, 2, 3, ...  I have tried ticking the Number Chaining radio button on L1 & L2, and on just L2, but can't get the L2 to output with L1's number.
    I.e.
    Should be:
    1  TESTL1
    1.1 TESTL2
    Outputs as:
    1  TESTL1
    .1 TESTL2
    Also after an L2 occurs the numbering is restarted, for example.
    Should be:
    1  TESTL1
    1.1 TESTL2
    1.2 TESTL2
    2. TESTL1
    2.1 TESTL2
    Outputs as:
    1  TESTL1
    .1 TESTL2
    .2 TESTL2
    1 TESTL1
    Any ideas, I have tried various ways but no success.
    Thanks in advance for your help.
    Daniel

    Hi
    Solved. The problem is just a visual one. When you look at the output in the Text tab of the Text Module the output is incorrect. When you output through print preview etc, it is output correctly.
    Bug for SAP to fix.
    Thanks
    Dan

  • Smartforms: Display text in a style not set globally

    Hi,
    I have this problem. I wish to display a text in a fixed box/window in my smartform. This text is dinamically handled in this box by an abap code. I can have two types of text of different number of words. For the short text I don't have problems but when I try to include a longer text, this text is truncated.
    More exacly I have as smartform style ZMM defined in output option tag. I set a global variable with the name of the text modules that I want to include. I tried to define a text module with a new style i.e. ZMM1 but when I show the test it is the same as the style is ZMM.
    How can I handle texts with different size of charactes or reduce the space between two linee but only for this text in this specific window?
    Any help well be well appreciated.
    Thanks in advance.
        Luigi

    well you can create additional paragraph formats for this purpose in your golbal style and use those in your text.

  • Smart style in smartforms

    Hi All.
    I ahve an issue in the smartform printing.
    I created a smart style through t.code:smartforms->styles.
    In this smart style I created some paragraph formats for <b>BOLD.</b>
    I assigned this smartstyle to the smartform.
    But while seeing the output ,the <b>BOLD</b> is not comming.It is comming in a normal format only.
    Can any body help me to solve this issue.
    Thanks in advance,
    reagrds,
    Eswar

    hi,
        u have to select the line and give tat character format which u created.
    then save and activate.
    Regards,
    Divya

Maybe you are looking for