SmartForms: Template: Box for Single Cell

Hi all,
I am using template of one row and two Column, I want to draw a box around for Column(1,1), where don't want to draw any box around Column(1,2).
Which pattern should i select so that i can achieve this?
Thanks in advance.

Make two box one with the border and the other without.
Sincerely

Similar Messages

Set_cell_Editor for single cells rather then complete column

Is it possible to set a cell editor (eg a link) only for single cells of a column.
Regards
Rene

hi rene.....
        you cannot do that......
        may be you can have an extral column called enabled or disabled and bind that property to the enabled property of the cell editor so that only one cell will be enabled while others disabled.
---regards,
   alex b justin

In dreamweaver CS4, I can't make border for single cell

Hi folks,
Having given up trying to make a single cell border in the dreamweaver CS4 template, I reverted to an html page and put in my own header, 2 columns and footer as cells in the html table. I know there's html code for adding borders to single cell, but I can't find it. I hope someone can give me a sample line of html code for giving a cell a border on left side and on right side, including 1px solid color border. Anyone?

Not sure if this is what you want, at least it will give you an example
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<style>
body {width: 980px; margin: auto; background: #FEE49A;}
#header {height: 120px; background: #060;}
#article {height: 400px; width: 749px; float: right; background: #FFF; border-right: 1px solid #060;}
#aside {height: 400px; width: 228px; float: left; border-right: 1px solid #060; border-left: 1px solid #060; background: #CCC;}
#footer {height: 50px; background: #060; clear: both;}
</style>
</head>
<body>
<div id="header"></div>
<div id="aside"></div>
<div id="article"></div>
<div id="footer"></div>
</body>
</html>
Gramps

Can i insert a dropdown selection box for a cell

Hi,
I have an exel spreadsheet that contains a dropdown selection box in one cell. allof the other formulae in the sheet work except the drop down. Is this possible in numbers on the ipad?
Thanks

Hi Paul,
Apple vocabulary for this is pop-up menu. In the Mac version of Numbers, it's a cell format, so if it's supported in the iOS version, I suspect you'll find it in the same place as you'd find other ways to format a cell—number, percentage, text, etc.
I've requested your question be transferred to the iWork for iOS community, where the iPad Numbers experts hang out, and where you'll get a more definitive answer.
Regards,
Barry

CellRenderer / Editor for single cell in JTable

        table.setDefaultRenderer(Color.class,
                                 new ColorRenderer(true));I thought the code above would set up ColorRenderer() to be run if, and only if, a specific cell contains the class in the first input paramter (in this case, java.awt.Class).
However, this doesn't seem to be the case. If I have one column with various classes in them (eg. java.awt.Dimension, etc.) the renderer for the Color.class is run every time! ..
This happens if you eg. change the data in the example:
http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/TableDialogEditDemo.java
to contain one element in the color colum that's eg. a java.awt.Dimension (you will get a ClassCastException).
How come this happens? This can't be the way it should be ...

Yeah .. but that wouldn't be as object oriented
thoughAgreed.
I had a look at the source of JTable. The problem seems to be the method:
public TableCellRenderer getCellRenderer(int row, int column)
that makes no use of the row argument.
I think you could fix this by subclassing JTable and overriding this method with something like:
public TableCellRenderer getCellRenderer(int row, int column)
    Object obj = dataModel.getValueAt(row, column);
    TableCellRenderer renderer getDefaultRenderer(obj.getClass());
    return renderer;
}Let me know how you get on.
Regards.

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

How can I take check box in particular cell of the table in smartforms??

Hi experts,
pls tell me how can I take check box in particular cell of the table in smartforms??
It is not interactive form.
I hv taken small windows as check boxes.but i think it is not a proper solution....give me another solution...

Hi,
first create text for a particular cell.
In that we have a text editor in that text editor we have symbols in include menu.
whatever the symboll u want to put to ur cell . just assign it.
please check it. if it helpful reward points.
regards,
satish.

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436)

ALV check box in a cell uneditable for already checked entry

Hi all,
I have written program to display ALV with a column having check boxes.
I have requirement to make ALV-chech box in a cell uneditable for some other login for already checked entry.
Please guide me for the same..

Hi,
If it is list, try using events and then call it in reuse_alv_grid_display.
Sample code from SDN
**events
REFRESH:IT_EVENTS.
CLEAR:X_EVENTS,IT_EVENTS.
X_EVENTS-NAME = SLIS_EV_END_OF_LIST.
X_EVENTS-FORM = 'MODIFY_LIST'.
APPEND X_EVENTS TO IT_EVENTS.
CLEAR X_EVENTS.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = SY-REPID
      IT_FIELDCAT        = IT_FIELDCAT
      IT_EVENTS          = IT_EVENTS
    TABLES
      T_OUTTAB           = ITAB
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM MODIFY_LIST.
data: l_lines type i.
describe table itab lines l_lines.
L_LINES = L_LINES + 3.
"because we have 3 lines extra occupied by lables.
"if we have header,i mean top of page add the no.of lines
"how many ever top of page have + 3 for labels.
DO L_LINES TIMES.
    read table it_chg with key INDEX = sy-index.
    if sy-subrc = 0.
**This code is for reading the out put line
**and modify accordinlg to our requiremnet.
**don't chnage this.
      READ LINE SY-INDEX INDEX SY-LSIND.
      IF SY-SUBRC = 0.
        MODIFY LINE SY-INDEX INDEX SY-LSIND
                   FIELD FORMAT ITAB-NAME INPUT.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    "MODIFY_LIST

Packer Arch: a template for building Arch base boxes for Vagrant

I thought some people might be interested in my Packer Arch project. It is a bare bones Packer template and installation script that can be used to generate a Vagrant base box for Arch Linux. The template works for both Vagrant's default VirtualBox provider as well as the VMware provider.
If you're not familiar with Vagrant, it's a way to "create and configure lightweight, reproducible, and portable development environments"...basically an incredibly easy way to spawn temporary virtual machines that you can use for testing/developing anything. In my case I launch Arch VMs to test out Ansible automated configuration tasks that I use to manage some personal servers. Anyway, hope somebody else finds it useful.
https://github.com/elasticdog/packer-arch

Absolutely right. I purposefully wanted to recreate a system that you'd see either out in the wild when purchasing a VPS, or what you'd have after performing a fresh installation from the latest ISO on your own hardware. Even though my end goal was to test Ansible, I didn't include its dependency of Python 2 directly in the build process, but kept things as minimal as possible and use a bootstrap script to handle dependencies after the fact. If you're interested in using Ansible to manage Arch hosts, I did write a quick blog post on my bootstrap process:
Developing Ansible Playbooks for Arch Linux with Vagrant
...and another project I published called Hyperboriarch has some good examples of doing initial configuration tasks with Ansible (securing ssh, configuring ntp, simple iptables firewall setup, etc.):
https://github.com/elasticdog/hyperboriarch
</self-promotion>
Last edited by elasticdog (2013-09-27 19:04:04)

Padding for a single cell

Hi
I feel awful for asking this but how do I insert padding for
a single cell. As far as I know the code should look something like
this: cellpadding= "0 10 0 10", but that's probably slightly or
completely off the mark and I'm not sure where to put it.
Thanks, Math

As Osgood points out, your non-zero padding values need to
have units
specified.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Kua the Indomitable" <[email protected]>
wrote in message
news:flicqc$qae$[email protected]..
> Hi
>
> I feel awful for asking this but how do I insert padding
for a single
> cell. As
> far as I know the code should look something like this:
cellpadding= "0 10
> 0
> 10", but that's probably slightly or completely off the
mark and I'm not
> sure
> where to put it.
>
> Thanks, Math
>

When OCS R2 single box for Windows?

I see the single box OCS R2 for Linux, but when will a single box version of R2 be available for windows?
thx Curt

I have been seen admin guide for ocs, but still can not install this product by its description !
I download Collaboration Suite single box for WinNT from OTN site, I got three ZIP file and extract into a same new directory c:\ocs, then I got these directory :
c:\OCS\DISK1\
c:\OCS\storage\DISK1
, I first run c:\ocs\disk1\install\win32\setup.exe but got java run time environment not found error message !
then I try c:\OCS\storage\DISK1\setup.exe to install storage, but must input infrastructure information in this progress(I still not install infra yet).
so, what is the correct step to install this single box OCS ?

Tooltip for single ALV cell

Hi,
is it possible to add a tooltip (text appearing when mouse is moved over) to a single cell in an ALV grid created with FUNCTION 'REUSE_ALV_GRID_DISPLAY'?
Please restrict your answers to the question, thank you.
Regards,
Clemens

Hi,
Tool tips are possible only at Column heading level unless you declare your column as a exception column / ICON / SYMBOL columns.
Regards,
Ravi
Note :Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

How do I change the background of a single cell or a row in a table?

How do I change the background of a single cell or a row in a
table? I doesn't seem to be letting me do that.

Are you using the latest DW? If so, then it isn't letting you
because
bgcolor is deprecated and shouldn't be used.
The correct way is to use css to define the background of a
cell
CSS:
.blackcell {background-color: black;}
HTML:
<td class="blackcell">whatever in the cell</td>
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Template Customization ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/
"dm25" <[email protected]> wrote in message
news:f4jr5h$luu$[email protected]..
> for some reason that doesn't always work. When I click
inside a cell, it
> doesn't give me an option to change the background
color.

SmartForms: Template: Box for Single Cell

Similar Messages

Maybe you are looking for