SMIL 2.0 with Flash CS3?
Hello Folks,
does anybody know if Flash CS3 fully supports SMIL 2.0 with
transitions and stuff like that?
Thanks a lot.
I was able to get the as2 remoting stuff working in cs3 by
downloading the sources to the components then placing them into my
classes folder. I hope that helps.
Similar Messages
-
Comunication and events: Flex Builder 2 with Flash CS3
Hey hello...well, my question is: how can i comunicate Flex
Builder 2 with Flash CS3?
this is my code on Flex Builder 2:
<mx:Script>
<![CDATA[
import mx.controls.*;
import mx.events.*;
public function CargaCompleta(e:Event):void
try
e.target.content.objeto_salida.addEventListener(Event.COMPLETE,uno);
catch(er:Error) { Alert.show(er.message,"Error"); }
public function uno(e:Event):void
try
s1.content["objeto_salida"].removeEventListener(MouseEvent.CLICK,s1.content["Finaliza"]);
s1.source = null;
s1.source = "recursos/reactivos/208M-1R.swf";
catch(er:Error) { Alert.show(er.message,"Error"); }
]]>
</mx:Script>
<mx:SWFLoader id="s1" width="278" height="251"
complete="CargaCompleta(event)"
source="recursos/interactivos/208M-1I.swf">
</mx:SWFLoader>
and when it change from one file to another, on the event
"Complete" for the SWFLodar, an error happend
TypeError: Error #1009: No se puede acceder a una propiedad o
a un método de una referencia a un objeto nulo.
at 208M_fla::MainTimeline/frame1()
Hope somebody can help me...for your time thanks..."Jorge EdOardo" <[email protected]> wrote in
message
news:gfcfcr$9s2$[email protected]..
> Hey hello...well, my question is: how can i comunicate
Flex Builder 2 with
> Flash CS3?
>
> this is my code on Flex Builder 2:
> <mx:Script>
> <![CDATA[
> import mx.controls.*;
> import mx.events.*;
> public function CargaCompleta(e:Event):void
> {
> try
> {
>
e.target.content.objeto_salida.addEventListener(Event.COMPLETE,uno);
> }
> catch(er:Error) { Alert.show(er.message,"Error"); }
> }
> public function uno(e:Event):void
> {
> try
> {
>
>
s1.content["objeto_salida"].removeEventListener(MouseEvent.CLICK,s1.content["Fin
> aliza"]);
> s1.source = null;
> s1.source = "recursos/reactivos/208M-1R.swf";
> }
> catch(er:Error) { Alert.show(er.message,"Error"); }
> }
> ]]>
> </mx:Script>
> <mx:SWFLoader id="s1" width="278" height="251"
> complete="CargaCompleta(event)"
> source="recursos/interactivos/208M-1I.swf">
> </mx:SWFLoader>
>
> and when it change from one file to another, on the
event "Complete" for
> the
> SWFLodar, an error happend
>
> TypeError: Error #1009: No se puede acceder a una
propiedad o a un m?todo
> de
> una referencia a un objeto nulo.
> at 208M_fla::MainTimeline/frame1()
>
> Hope somebody can help me...for your time thanks...
http://weblogs.macromedia.com/pent/archives/2007/04/using_actionscr_1.html -
Adobe AIR updater applicationupdater_ui.swc with Flash CS3 not working
Hello AIR geeks,
I have a project which is running in Flash CS3 with AIR.
I would like to incorporate the functionalities which are available in applicationupdater_ui.swc
Can any one please help me to make it available for flash cs3
got a very nice code sinppet also
http://www.fmajakovskij.info/air-updater-made-easy-with-scheduling/
but Its not working with Flash CS3
Thanks a lot
Regards,
SrinivasUse the Flex/Flash Component Kit to wrap your symbols for use in Flex
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
Problem with compression with flash cs3
our web developper says that she was unable to compress image
with flash cs3 any idea why and what i can do for her ?
ThanksMark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Color management issues with Flash CS3, please help?
Hello everyone.
I am having issues with color from a Jpeg image produced in Photoshop CS4
after importing onto the stage in Flash CS3. The color in Flash changes the image to a lighter less saturated state. Yuk.
Here is a link to a screen capture to show you what's happening (for a bigger view):
http://www.rudytorres.com/color/weirdcolor.png
As you can see the front image is the Photoshop image showing the sRGB color profile embedded but Flash (behind) changes that color.
This client is quite picky and she will notice this difference.
If any one can help, please.
- Rudy
P.S. It's a button somewhere, Right?Dougfly,
Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
http://www.dinagraphics.com/color_management.php
Lou -
I installed the adobe vcam extension in my Flash CS3 (Mac)
and it all works
ok except that the vcam frame comes in with a crosshairs
located on the
upper left hand corner of the frame and no matter what I do I
cant get it to
set the crosshairs on the center of the frame.
When I go to use it and test the movie, the vcam action keeps
giving me a
lot of extra white space to the top and left of the screen
rather than show
me the actual frame area that I want to see and zoom into.
Can anyone please tell me how the crosshairs of the vcam
frame can be set to
the center of the frame so that what I really want to frame
and zoom on
actually shows up in the rendered movie? Or is there another
way to make the
vcam frame include the areas that I want instead of giving me
all the
unweanted extra white space?
Thanks a lot for any advice.I installed the adobe vcam extension in my Flash CS3 (Mac)
and it all works
ok except that the vcam frame comes in with a crosshairs
located on the
upper left hand corner of the frame and no matter what I do I
cant get it to
set the crosshairs on the center of the frame.
When I go to use it and test the movie, the vcam action keeps
giving me a
lot of extra white space to the top and left of the screen
rather than show
me the actual frame area that I want to see and zoom into.
Can anyone please tell me how the crosshairs of the vcam
frame can be set to
the center of the frame so that what I really want to frame
and zoom on
actually shows up in the rendered movie? Or is there another
way to make the
vcam frame include the areas that I want instead of giving me
all the
unweanted extra white space?
Thanks a lot for any advice. -
Trouble with Flash CS3 install
Where do I begin with something this weird? I'm on a Windows
XP laptop. I meet the minimum requirements. I downloaded the trail
version of Flash Professional CS3 today. I ran the executable,
which extracted files onto my Desktop. I went into the Adobe CS3
folder it put on my laptop and ran Setup.exe. It seemed to run just
fine, though I wasn't paying close attention to the process. When I
got the done screen, I didn't even look to see if everything had
properly installed; I just assumed it did.
Now while all this was happening, I was browsing the
internet. I'm both careful and paranoid, so I use Mozilla Foxfire
with adblocking, etc. I went to a site I thought I could trust and
something attempted to install a file on my computer, which Firefox
appropriately asked me if I wanted. I said no, but it gave me a bad
feeling (esp. since I never get popups like that anymore), so once
Flash was done installing, I decided to use System Restore to back
up to the day before, just to play it safe.
After running system restore, of course my install of Adobe
Flash was gone (which I expected) so I went ahead and ran the
install file again. This time I wasn't doing anything else, so I
paid attention to the process. The install file ran fine, but when
it got to the part where it asked me which components I wanted to
install, the only component listed was the Flash Player 9 (the
actual Flash Professional program was not listed as an option I
could choose). Still, I checked the Player 9 and continued to see
what would happen. It went to a screen that listed components it
was ready to install, which *included* Flash Professional CS3. So I
clicked okay, it did its thing, and when it finished it said it had
succesfully installed Flash Player 9 but there had been an Error
installing Flash Pro. Indeed, Flash Pro was not on my computer.
Thinking the download might be corrupt, I uninstalled Flash
Player 9 and deleted the file I'd downloaded. I went back to the
Adobe site and downloaded the Flash CS3 trial again. I went through
the same process, with the same results. No Flash Pro, only Flash
Player. I am baffled.i had the same problem and after countless hours i just
downloaded flash pro 8
its so great
you could just download version 8
sorry its not much help -
Help with Flash CS3 Particle Effect Tutorial Code
I did the tutorial from http://www.schoolofflash.com/2008/03/flash-cs3-particle-effect/. I used a star to replace the circle. Here's my code:
var starsArray:Array = new Array();
var maxStarss:Number = 8;
function addStars(e:Event)
var stars:Stars = new Stars();
stars.x = stage.stageWidth/2;
stars.y = stage.stageHeight/2;
stars.alpha = Math.random() * .8 + .2;
stars.scaleX = stars.scaleY = Math.random() * .8 + .2;
stars.xMovement = Math.random() * 10 - 5;
stars.yMovement = Math.random() * 10 - 5;
starsArray.push(stars);
addChild(stars);
stars.cacheAsBitmap = true;
if (starsArray.length >= maxStarss)
removeChild(starsArray.shift());
stars.addEventListener(Event.ENTER_FRAME,moveStars);
function moveStars(e:Event)
e.currentTarget.x += e.currentTarget.xMovement;
e.currentTarget.y += e.currentTarget.yMovement;
var myTimer:Timer = new Timer(50);
myTimer.addEventListener(TimerEvent.TIMER, addStars);
myTimer.start();
This time, I'm trying to make the stars shrink and transparent as they move away from the point. So I coded it like this:
import flash.events.Event;
var starsArray:Array = new Array();
var maxStarss:Number = 8;
function addStars(e:Event)
var stars:Stars = new Stars();
stars.x = stage.stageWidth/2;
stars.y = stage.stageHeight/2;
stars.alpha = Math.random() * .8 + .2;
stars.scaleX = stars.scaleY = Math.random() * .8 + .2;
stars.xMovement = Math.random() * 10 - 5;
stars.yMovement = Math.random() * 10 - 5;
starsArray.push(stars);
addChild(stars);
stars.cacheAsBitmap = true;
if (starsArray.length >= maxStarss)
removeChild(starsArray.shift());
stars.addEventListener(Event.ENTER_FRAME,moveStars);
stars.addEventListener(Event.ENTER_FRAME,animeStars);
function animeStars(e:Event)
trace(this.starsArray);
this.scaleX-=0.01;
this.scaleY-=0.01;
this.alpha-=0.01;
if (this.alpha<=0) // remove this object from stage
function moveStars(e:Event)
e.currentTarget.x += e.currentTarget.xMovement;
e.currentTarget.y += e.currentTarget.yMovement;
var myTimer:Timer = new Timer(50);
myTimer.addEventListener(TimerEvent.TIMER, addStars, animeStars);
myTimer.start();
I couldn't make it work. All I got was an error message saying "
1084: Syntax error: expecting identifier before rightbrace.
Help?It is because of this line of code at the end
myTimer.addEventListener(TimerEvent.TIMER, addStars, animeStars);
if you read the documentation on addeventlistener it looks for these type of arguments to be passed
addEventListener(type:String, listener:Function, useCapture:Boolean);
animeStars is not a boolean it is a function. Since you already have animeStars in your addStars function you can exclude it in the last event listerer. try this:
myTimer.addEventListener(TimerEvent.TIMER, addStars); -
Using web services with flash cs3 and actionscript 3.0
Hi,
I want to use web services under flash cs 3 and by using as
3.0.
It was possible with as 2.0 to do it easily thanks to the
webservice Connector.
But I can't find how to use web services under flash and as
3.0.
I thought web services took part of the many improvements
flash cs 3.0 contain, but obviously it does not:(
Can anybody help me to use webservices with flash cs 3 and as
3.0?
Thanks in advance,
PascalDark Armor, You mentioned the book Adobe Flash CS4 Professional Classroom in a Book, which I have. I could not find anything in there. Did you mean to say Actionscript 3.0 for Adobe Flash CS4 Professional? I do have that book and it looks like there is information there. Just wanting to make sure that you meant what you said. Thanks!
-
No smoothing video with Flash CS3
Hi there,
i trie to play some FLV over Flash CS3. Its runs perfect but
now i have the Problem, that i cannot set the playing oder the
video on smoothing.
If i add in my ActionScript3.0 follows:
my_FLVPlybk.smoothing="true";
Than i see this message: ReferenceError: Error #1056:
Eigenschaft smoothing in fl.video.FLVPlayback kann nicht erstellt
werden.
at Infoblock_fla::MainTimeline/frame2()
I´ve installed the last Player of Flash and cannot
understand, what i´ve made wrong.
Can you send me please a tip, how can i resolve the Problem?
Thanx!smoothing does not work on an FLVPlayback component, only on
the Video class. -
Keynote swfs not compatible with Flash cs3 As3
I have flash timeline controls now written in AS3 but when I export swf from keynote I get a conflict- looks like keynote swf exports in as2 only. Is there anyway to change the keynote preference? Anyone know of other converters to produce swfs compatible with AS3?
Have you tried visualhub. It is a very versatile format transformer.
Mireille -
Flash Remoting as1.0 with flash cs3
I need to get remoting components for as1.0 to work in cs3 is
there a way around this?
I have an old app I need to re-use and do not have the time
to remake it into as3.0I was able to get the as2 remoting stuff working in cs3 by
downloading the sources to the components then placing them into my
classes folder. I hope that helps. -
MONITOR ISSUE WITH FLASH CS3 (again)
Hello, me again with the same issue..still
Just to recap
After publishing my files, my site appears Ok on large monitors like 23 inch. Everything just work fine. The main window is 1024/728 pixels.
But, the top of the site gets chopped up on laptops. about 10 cm from the top. No way to redraw the window. There are scrolling bar on the right hand side but they do not allow you scroll up or down enough.. As all the navigation buttons are at the top, you are stuck with nowhere to go.
I have added a line of code
stage.align = StageAlign.TOP; but it does not help.
I have also tried reducing the percentage in the publishing window by 50% just to see.
It makes no difference on laptops.
Hope someone can help before I have to redo the site
Regards
Michelif you want it to open in the same window you need to have it reference "self"
unction fl_ClickToGoToWebPage_7() {
window.open("http://www.apple.com", "_self"); -
I am running an animation mostly with line segments and filled circles moving around on screen.
I have a bunch of lineTo statments, and would like to place my circles at the end of these line segments.
When I draw circle and define it as a "movieclip" the base coordinate of the clip is the upper left hand corner of
a square encompassing the circle.
As a result all my circles are displaced slightly from where they need to be.
How do I fix this?
Thx.If I understand you correctly you need to center the coordinate system of your movie clips. To do this edit the movie clip and then select it's content and from the alignmend toolbox check "center to stage". Do this for all of the moviclips you need centered.
-
Anyone know Flash CS3 embed font's Glyphs Range!! with font class(no TextField )
I have add some font by Font class in the library
(TextFeild.embedFonts=true)
but the font's glyphs looks not enough.
when i use text String " ü ä ö ß π
à â ç è é ê ë î ï
ô ù û œ "
only the "π" and "œ" is can be visible.
Font.hasGlyphs also return false;
if i only create a TextField, and Click the Embed button
selection glyphs range.
the text will be fine.
but i won't use TextField by drag to the stage
i heard in flex:
@font-face {
src:local("Arial");
fontFamily: myFont;
flashType: true;
unicodeRange:
U+0041-U+005A, /* [A..Z] */
U+0061-U+007A, /* a-z */
U+0030-U+0039, /* [0..9] */
U+002E-U+002E; /* [.] */
so what can i do in Flash CS 3?
thanks a lot
i really tried working on this.maybe i just need go back use
the .....TextField.Im not sure if u can do it with flash cs3.
i change a little ur code to :
package {
//import flash.util.describeType;
import flash.display.MovieClip;
import flash.text.TextField;
import flash.text.TextFormat;
import flash.text.AntiAliasType;
import flash.text.TextFieldAutoSize;
import flash.text.TextFormatAlign;
import flash.text.Font;
public class Test extends MovieClip {
// be sure this is pointing to a ttf font in your hardrive
[Embed(source="arial.ttf", fontFamily="foo", mimeType="application/x-font-truetype")]
public var arialfont:Class;
public function Test() {
Font.registerFont(arialfont)
var format:TextFormat = new TextFormat();
format.font = "foo";
format.color = 0xFFFFFF;
format.size = 130;
var label:TextField = new TextField();
label.embedFonts = true;
label.autoSize = TextFieldAutoSize.LEFT;
label.antiAliasType = AntiAliasType.ADVANCED;
label.defaultTextFormat = format;
label.text = "Hello World!";
addChild(label);
trace(label.text);
label.setTextFormat(format);
and it works fine with flash cs4, only first time it will ask to confirm flex sdk location ( have to have flex sdk to use embed, u can downlaod it free from adobe.com)
hope that helps
Maybe you are looking for
-
Lost all data. How to get back information from iCloud.
Hello everyone! My iPhone updated itself and deleted all my messages, mailbox, what's app. I guess it happened because I had got a new iOS7 before. How can I get back all information using iCloud? Would be great if you help to find a solution! Thank
-
Java dynpro - bind a table in the input parameters of an RFC
Hi , JAVA Webdynpro - I have to bind a table in the input parameters of an RFC. The code below is taking in the N num of rows but is repeating the last row N times and sending it to the RFC. Ztsgt_Pos_Name postionTab = new Ztsgt_Pos_Name();
-
Best practice: Computations or Source
Hi, Question about what's the best use. If you write a SQL query to get a value out of a database for a field on your page. What is the best way to do this. - By setting a computation (with the query) on that field - Or write te query in the source a
-
Firefox switches back to originating site instantaneously.
This question, I'm sure, has been asked before. I just can't seem to find the CORRECT solution. This has been going on now for, I know, a year or more. I just get tired of trying to find the solution so I just deal with it. Well, I've got to the poin
-
Siemens S55 sync issue (MacOS X 10.4.8)
I've just upgraded my iMac from 10.3.9 to 10.4.8. I've encountered an issue with iSync (v 2.3 I guess) When I try to sync my Siemens S55 with iCal and AddressBook via iSync, 1 - the dates and meeting in iCal are transfered on my S55 calendar, but the