SMS from ABAP program to send error message

Hi,
I would like to know what are settings to be done in the system to send an SMS from ABAP program using FM 'SO_DOCUMENT_SEND_API1'.I was trying to send SMS using above FM but the error was "Cannot process message, no route from <userid> to <Mobile.no> ".
Pls let me know the pre requisites to send an SMS using above FM.
Regards,
Nivas

Hi,
I have gone thru this blog but I want send SMS to US Mobile no.I checked other webservice but it supports only few cellular networks in US.
any other alternate for this...
anyway thanks for your reply
Regards,
Nivas

Similar Messages

ABAP Program to send HTTP message

Hi All,
I tried executing the program in "[ABAP-Based HTTP Client for Messages to SAP XI|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ae388f45-0901-0010-0f99-a76d785e3ccc]" Article to send HTTP messages to XI system.
Entered all required parameters and entered XMl Payload with the option "Insert Payload as Text"
The scenario in XI has Integration Process and the first step is a Sync-Async step.
The message execution fails in that step with status "Pipeline Timeout"
I can see only half of the xml payload in sxmb_moni.
There are no short dumps and the Integration Process is working fine when I send messages using HTTP client.
Let me know if there are any checks for tracing the problem.
Thanks,
Uma

Hi,
I have gone thru this blog but I want send SMS to US Mobile no.I checked other webservice but it supports only few cellular networks in US.
any other alternate for this...
anyway thanks for your reply
Regards,
Nivas

How can you create a spoolfile from a program where have Error Message?

I have a situation where I need a report to come out - even if I have an Error or Abort Message.
I need the report so that i can email the users in a second step of a Job.
We want the CANELLED to show in the JOB queue but when that happens by doing a message with the error it does not output any spool file.
The code is simple:
   CONCATENATE c_errors
                c_error_645
        INTO z_msg_line SEPARATED BY space.
    WRITE z_msg_line TO z_output_line.
    WRITE: z_output_line.
    lv_errors = 'X'.
    MESSAGE ID 'ZX' TYPE 'E' NUMBER '645'.
The job stops, shows CANCELLED but not output to the spool file.
If I change message type to I for imfomation I get the spoolfile but the JOB queue shows COMPLETED so a Basis person will not catch the Cancelled job.
Thanks.

Does the email processing have to occur within the same job? Why not establish a polling process for cancelled jobs where you control the job name(s) to poll for and the linked users to email? When you find a canceled job you can read the job log messages (assuming you have logged your errors using 'S' messages and then used a final 'E' message to stop the job) using function BP_JOBLOG_READ. You could establish a spool from that (and attach it) or just embed the messages in the email body itself.
I'm not sure what your scenario is though - I would separate application errors from technical errors in your error notification process, i.e., handle error notification/emailing within your programs themselves and avoid abending jobs if possible. Are these Basis-handled errors or user-handled errors that you're talking about?
Edited by: Brad Bohn on Aug 19, 2010 3:51 PM

Sending emails from ABAP program

Hi,
I need to send error emails from ABAP program.
I have to pass error internal table as text (not as attachment) in the email.
Can anybody supply any sample code?
Thanks in advance.
Regards,
Arun Mohan

HI,
See if this code helps:
***Sending mail to the receipients
if not it_final[] is initial.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Sales Register Report - Set Top Box / Accessories'
'XLS'
'SSTB'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
endif.
*& Form BUILD_XLS_DATA_TABLE
text
--> p1 text
<-- p2 text
FORM BUILD_XLS_DATA_TABLE .
data: wa_itab like it_final.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'Business Place' 'Region Code' 'Region' 'Branch Code'
'Branch' 'Material Desc' 'Area off Code'
'Area Name' 'Zone code' 'Zone Name' 'Cust No' 'Cust Name'
'Bill Doc No' 'Bill Date' 'Base Val' 'Total Val' 'Quantity'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_FINAL INTO WA_ITAB.
CONCATENATE WA_ITAB-BUSINESS_PLACE
WA_ITAB-KVGR1
WA_ITAB-REGION
WA_ITAB-VKBUR
WA_ITAB-SALES_OFF
WA_ITAB-ARKTX
WA_ITAB-vkgrp
WA_ITAB-sales_grp
WA_ITAB-bzirk
WA_ITAB-zone
WA_ITAB-kunnr
WA_ITAB-name
WA_ITAB-vbeln
WA_ITAB-fkdat
WA_ITAB-base_value
WA_ITAB-total_value
WA_ITAB-fkimg
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form POPULATE_EMAIL_MESSAGE_BODY
text
--> p1 text
<-- p2 text
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
CONCATENATE SY-DATUM6(2) '/' SY-DATUM4(2) '/' SY-DATUM+0(4) INTO G_DATE.
IT_MESSAGE = 'Please find attached excel sheet.'.
APPEND IT_MESSAGE.
IT_MESSAGE = 'Sales Register Report - Set Top Box / Accessories'.
APPEND IT_MESSAGE.
Concatenate 'Report generated date' ':' G_Date '.' into IT_MESSAGE.
APPEND IT_MESSAGE.
clear it_message.
append it_message.
IT_MESSAGE = 'This is an autogenerated mail, please do not reply'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
T_PACKING_LIST-OBJ_NAME = 'stb'.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-DOC_TYPE = 'XLS'.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_DESCR = 'Sales_STB'.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-OBJ_NAME = 'stb'.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT IT_RECV.
T_RECEIVERS-RECEIVER = IT_RECV-EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-COPY = 'X'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
text
--> p1 text
<-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = ''
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Subramanian

Sending an email to users from abap program

Hi experts ,
How to send an email to users from abap program ...
i need full coding please..so that i can copy and paste it in my program.
Thank you in advance.
Rajasekhar.P

Hi Venkat
check the below simple code to convert spool to HTML and email it
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata   like sodocchgi1.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0 with header line.
start-of-selection.
Produce a list
do 100 times.
    write:/ sy-index, at 30 sy-index, at 50 sy-index.
enddo.
Save the list
call function 'SAVE_LIST'
       tables
            listobject         = list
       exceptions
            list_index_invalid = 1
            others             = 2.
Convert the list
call function 'WWW_LIST_TO_HTML'
       tables
            html = htmllines.
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Send BW query results as HTML email from ABAP program

I have published a code sample for sending BW query results as HTML email from ABAP program. if you have any questions or clarification, please post them here.
the same can be accessed from this link.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b7658119-0a01-0010-39a9-b600c816f370
Regards
Raja
Message was edited by: Durairaj Athavan Raja

OK forget about my earlier post.
do the following changes.
declare the following variables:
data: xtext type standard table of solix .
DATA: atta_sub TYPE sood-objdes .
after the call of FM SCMS_STRING_TO_FTEXT add the following code.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
    ip_solitab        = text
IMPORTING
   EP_SOLIXTAB       = xtext .
and after the following statement
document = cl_document_bcs=>create_document(
                          i_type    = 'HTM'
                          i_text    = text
                          i_length = conlengths
                          i_subject = subject ).
add the following code
CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'htm'
              i_attachment_subject = atta_sub
              i_att_content_hex    = xtext.
now you will have results both in the body as well as attachment. (this is for test you can remove one of them )
Regards
Raja

Sending IDOCS from ABAP Program

hi friends,
           can we send IDOC ( of type MATMAS) form ABAP Program. if it possible how can we send, are there any function modules to do so....could any one tell me the procedure to accomplish the task...i have finished the configuration sting in both reciver and sender systems....just need to send material in form of IDOC from abap program.
( Note: not form BD10).
Thanks in advance,
Santosh.

Hi,
Follow this code it will help u...
This is for the user created IDOC but as u are making use of ur own basic type i.e., Idoc type MATMAS05
and u can write the code.
*& Report ZZ_Program_To_Create_Idoc
report zz_program_to_create_idoc                     .
tables: ekko,ekpo.
selection-screen skip 3.
selection-screen begin of block b1 with frame title titl.
selection-screen skip.
select-options s_ebeln for ekko-ebeln.
selection-screen skip.
selection-screen end of block b1.
data: header_segment_name like edidd-segnam value 'Z1EKKO',
      item_segment_name like edidd-segnam value 'Z1EKPO',
      idoc_name like edidc-idoctp value 'Z19838IDOC1'.
data: header_segment_data like z1ekko,
      item_segment_data like z1ekpo.
data: control_record like edidc.
data: messagetyp like edmsg-msgtyp value 'ZZ9838MESG1'.
data: i_communication like edidc occurs 0 with header line,
      i_data like edidd occurs 0 with header line.
data: begin of i_ekko occurs 0,
      ebeln like ekko-ebeln,
      aedat like ekko-aedat,
      bukrs like ekko-bukrs,
      bsart like ekko-bsart,
      lifnr like ekko-lifnr,
      end of i_ekko.
data: begin of i_ekpo occurs 0,
      ebelp like ekpo-ebelp,
      matnr like ekpo-matnr,
      menge like ekpo-menge,
      meins like ekpo-meins,
      netpr like ekpo-netpr,
      end of i_ekpo.
start-of-selection.
select ebeln aedat bukrs bsart lifnr from ekko
          into table i_ekko where ebeln in s_ebeln.
select ebelp
       matnr
       menge
       meins
       netpr
       from ekpo
       into table i_ekpo
       where ebeln in s_ebeln.
control_record-mestyp = messagetyp.
control_record-rcvprt = 'LS'.
control_record-idoctp = idoc_name.
control_record-rcvprn = '0MART800'.
loop at i_ekko.
header_segment_data-ebeln = i_ekko-ebeln.
header_segment_data-aedat = i_ekko-aedat.
header_segment_data-bukrs = i_ekko-bukrs.
header_segment_data-bsart = i_ekko-bsart.
header_segment_data-lifnr = i_ekko-lifnr.
i_data-segnam = header_segment_name.
i_data-sdata = header_segment_data.
append i_data.
select ebelp
       matnr
       menge
       meins
       netpr
       from ekpo
       into table i_ekpo
       where ebeln = i_ekko-ebeln.
loop at i_ekpo.
item_segment_data-ebelp = i_ekpo-ebelp.
item_segment_data-matnr = i_ekpo-matnr.
item_segment_data-menge = i_ekpo-menge.
item_segment_data-meins = i_ekpo-meins.
item_segment_data-netpr = i_ekpo-netpr.
i_data-segnam = item_segment_name.
i_data-sdata = item_segment_data.
append i_data.
endloop.
clear i_ekpo.
refresh i_ekpo.
endloop.
call function 'MASTER_IDOC_DISTRIBUTE'
exporting
    master_idoc_control                  = control_record
OBJ_TYPE                             = ''
CHNUM                                = ''
tables
    communication_idoc_control           = i_communication
    master_idoc_data                     = i_data
exceptions
   error_in_idoc_control                = 1
   error_writing_idoc_status            = 2
   error_in_idoc_data                   = 3
   sending_logical_system_unknown       = 4
   others                               = 5
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
         with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
loop at i_communication.
    write: 'IDOC GENERATED', i_communication-docnum.
endloop.
commit work.
endif.
initialization.
titl = 'ENTER THE PURCHASE ORDER NUMBER'.

Is it possible to send error message from Adapter Module to CCMS?

Hi
Is it possible to send error message from Adapter Module to CCMS...?I have written on adatper module from there i have to send error message to CCMS or SXMB_MONI. Is it possible if yes please send me the related documents
Best Regards
Ravi Shankar B

Hi
I have written following User Defined Exeption in my Module program
class DuplicateFileException extends ModuleException{
          DuplicateFileException(String message){
               super(message);
I am throwing my Exception like this
try{
     throw new DuplicateFileException("Duplicate File");
}catch(DuplicateFileException e){
     throw e;
But i am not getting this exception in SXMB_MONI. In adpater monitoring i am getting the following exceptions
<b>
2007-05-16 15:51:30 GMT+05:30: Retry interval started. Length: 5.000 s
- 2007-05-16 15:51:30 GMT+05:30: Error: java.lang.NullPointerException
- 2007-05-16 15:51:30 GMT+05:30: An unknown error occured.
- 2007-05-16 15:51:30 GMT+05:30: Processing started
- 2007-05-16 15:51:25 GMT+05:30: Error: java.lang.NullPointerException</b>
can any one give me the idea how to send error from module program to SXMB_MONI
Thanks & Regards
Ravi Shankar B

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset.

How to send error message to forms from Database Trigger

Hi, Please help me to send error message to forms from Database Trigger?
RgDs,
Madesh.R.M

You are correct, the On-Error trigger is a Forms trigger. However, if your Form is going to display the error generated by the database stored procedure or trigger - you might not see the database error in your Form unless you check the DBMS_ERROR_CODE in the On-Error trigger and manually display the Error Code and associated Text. I've see this happen with a co-worker. The Form she was working on was based on a table with an Before-Insert trigger. Because she was not explicitely handling the error from the Before-Insert trigger in the Forms On-Error trigger, her Form appeared to halt for no reason at all. Once she added code to the On-Error trigger in the Form to handle the DBMS_ERROR_CODE, she discovered the trigger was producing an error and was able to show the error to the user in the On-Error trigger.
I understand the desire to keep as much as possbile in the database, but with that comes some extra coding in your Forms to handle this. This extra coding could easily be placed in a Forms Library, attached to a Form and called in the On-Error trigger. Your code could look like this:
DECLARE
   /*This example assumes you have an Alert defined
      in your Form called: 'ERROR' */
   al_id    ALERT;
   al_text VARCHAR2(200); /* Max text of a Forms Alert message*/
   al_btn   NUMBER;
BEGIN
IF DBMS_ERROR_CODE != 0 THEN
   /* Error code is ORA-00000 Normal Successful completion
       So only handle non-zero errors */
   al_text := DBMS_ERROR_CODE||':'||DBMS_ERROR_TEXT;
   al_id := Find_Alert('ERROR');
   set_alert_property(al_id, alert_message_text, al_text);
   al_btn := show_alert(al_id);
END IF;
END;Your original question was "How to send error message to forms from Database Trigger?" The answer is you don't because Forms already gets the database error code and database message through the Forms DBMS_ERROR_CODE and DBMS_ERROR_TEXT functions. Look these up in the Forms help and it should clear things up for you.
Craig...
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:50 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM

How to send SMS from Java program?

Hello,
I want to know, how can I send SMS from Java program.I dont have any idea about SMS gateways. Can any one give me Sample code for sending the SMSs from Java Program.
Thanks,
-BR

hi,
refer javamail concepts
http://www.google.co.in/search?q=javamail+simple+example&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

Sending EMAIL from ABAP Program Configuration+Code(Step by step)

Dear All,
Please anybody can provide me Step by Step document for sending Email from ABAP Program.
Thanks,
RP

Not an appropriate forum. Try ABAP forum.
Regards,
Jai Shankar

HT202724 How i can send multiple sms from mac without being a group message ?

How i can send multiple sms from mac without being a group message ?

Start new conversations, one for each recipient.

How ro send error message from BADI to BAPI

i have a BADI which is triggered from a BAPI.This BADI has only importing and changing parameters.How can i send error message to BAPI.Please reply at the earliest.
High points can be expected.

Hi Arshi,
Please check whether the following link is of any use to you,
how to capture the error message from bapi
Best Regards.
Reward points if it is helpful.

ABAP program for sending emails

Hello SAP developers,
I need ABAP program for sending emails to my internet adress in background - just some simple header with no body and no attachement. Recipient should be specified due the parameter etc... Does program like this exist or i have to create it? I am not familiar with ABAP. I am basis admin so I am little bit lost in this. I have tried program code from this page ->
http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
But anyway it does not work - there is an exception "no message send". SCOT is configured, mails are working fine from transaction SBWP.
Thanks in advace
JM

I have already solved my issue through CCMS agents and RZ20 central autoreaction (sms) in Solution Manager.
Regards
JM

SMS from ABAP program to send error message

Similar Messages

Maybe you are looking for