SMTP - mail service
Hi,
i configured the SMTP for mail service.
I can able to send mail to our domain ( for ex: abc.com ) - default domain
i gave SMTP Connection as : mail.abc.com
the above scenario --- will work for me if i send mail to our default domain. but i am not able to send to yahoo, gmail.
Please help me ...
--- Lee
Hi Lee,
In the SCOT, SMTP node you need to have the SMTP server address. if you've given the sap server IP address, then revert it back.
What Juan has already mentioned,
"you need to make sure that the IP address of the SAP System is populated on the SMTP relay agent for the mails to leave the domain." that means you've to tell your SMTP mail admin guys to add the SAP server IP address in the relay agent.
Regards,
Debasis.
Similar Messages
-
SMTP Mail Service is not functioning
Using Breeze 5.1 with service pack 2, I cannot send e-mail
from the server. I know the SMTP server is working since it is
hosting other applications.
Is there anyway of troubleshooting SMTP e-mail issues?We experienced something like this. Our SMTP server was only
sending messages to local accounts and not to other email addresss.
This was due to security measures in place that prevented non
authenticated mail being sent through the server. We had to use a
less secure SMTP set up to get it to work. The IT people set up a
trusted relationship between the too servers, but this is only a
workaround and not a solution. -
Filemaker SMTP mail service setup
I am using Filemaker server on Snow Leopard and need to setup a SMTP server. I need to use SMTP to send emails form the Filemaker server. Does anyone know how to set this up on Snow Leopard for Filemaker server 11. Really could use the help.....
You don't need one. Just point it at the SMTP server provided by your service provider -- unless you are doing mass mailings and you rservice provider prohibits that, in which case there's a good chance that they may also block an SMTP server on your local host.
You can enable the Apple-provided SMTP server (postfix) on your local machine (though keep in mind that your sevice provider might see this as evidence of spamming and block it), simply enough.
Edit the file /System/Library/LaunchDaemons/org.postfix.master.plist
The last line of the file is '</dict>'; add this before it:
<key>RunAtLoad</key> <true/> <key>KeepAlive</key> <true/>
... save the file and open Terminal. Type this:
sudo launchctl start org.postfix.master -
Set up Mail service for SMTP only.
I wish to set up the Mail service to act as an smtp server only.
I have FileMaker Server running on this server, on which I am using a plug-in to send mail to my ISP's smtp server. But I am outgrowing my daily sending limits through my ISP (100/day), and would like to run my own smtp server instead.
I have turned on the smtp mail service and it is running, but I'm not sure what credentials I should use to authenticate when connecting to this smtp server...I have turned on the smtp mail service and it is running, but I'm not sure what credentials I should use to authenticate when connecting to this smtp server...
Why use any?
If the Filemaker Server is inside your network and this server is just acting as a relay for outgoing mail then you don't need authentication at all. Just tell postfix to trust local networks ("Relay mail from the following networks" in Server Admin and add your internal addresses) and you're set.
Since the server won't be accepting mail from outside clients or servers that's all you need to do. There's no need to authenticate since the connection is coming from a trusted network.
If you still do want to use authentication then just provide any username/password combo that is valid for this server. You could even create a dummy account just for this purpose if you prefer. -
Mail service stuck starting in Mavericks
After installing Mavericks server I've got a problem with the mailserver. In the Server.app it keeps showing as starting, but it never starts.
the terminal command 'serveradmin fullstatus mail' shows that everything is started as it should, except the Mail Transfer Agent. It shows the error Warning: SMTP mail service is enabled but not running.
The command 'serveradmin start mailtransferagent' results in the error "CANNOT_LOAD_BUNDLE_ERR"
Console shows no helpfull messages except the obscure "serveradmin: posting dist not" right after entering the 'serveradmin start mailtransferagent' command.
Any idea how I can get the mail service to start?It's sort of an upgraded system. The Mavericks installation is actually a fresh one, but data was then restored with TimeMachine from a previous 10.6 system. So old configs are a possibility.
Belowe is all that showed in the log. Besides some (IMHO) non critical permission warnings, there is nothing. The mailaccess.log was actually empty.
Mail.log:
postfix/postfix-script[67467]: warning: group or other writable: /Library/Server/Mail/Config/postfix/./custom_header_checks
postfix/postfix-script[67468]: warning: group or other writable: /Library/Server/Mail/Config/postfix/./master.cf.default
postfix/postfix-script[67469]: warning: group or other writable: /Library/Server/Mail/Config/postfix/./master.cf.orig
postfix/postfix-script[67470]: warning: group or other writable: /Library/Server/Mail/Config/postfix/./virtual.db
postfix/postfix-script[67471]: warning: group or other writable: /Library/Server/Mail/Config/postfix/./virtual_domains
postfix/postfix-script[67472]: warning: group or other writable: /Library/Server/Mail/Config/postfix/./virtual_users
System.log:
mds[63]: (/)(Warning) IndexQuery in virtual bool SISearchCtx_FSI::performSearch(struct PartialQueryResults *):Retried searchfs 4 times
mds[63]: (/)(Warning) IndexQuery in virtual bool SISearchCtx_FSI::performSearch(struct PartialQueryResults *):Throttling slow file system query
xpcd[916]: restored permissions (100600 -> 100700) on /private/var/root/Library/Containers/com.apple.TextEdit/Container.plist
WindowServer[107]: disable_update_timeout: UI updates were forcibly disabled by application "TextEdit" for over 1.00 seconds. Server has re-enabled them.
com.apple.appkit.xpc.openAndSavePanelService[68212]: Bogus event received by listener connection:
<error: 0x7fff7af06b50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7af06e60> { length = 18, contents = "Connection invalid" }
quicklookd[68202]: generateImageInProcess Failed to composit image for binding VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: pps, UTI: com.microsoft.powerpoint.pps, fileType: ????.
quicklookd[68202]: generateImageInProcess Failed to composit image for binding VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: GIF, UTI: com.compuserve.gif, fileType: ????.
WindowServer[107]: common_reenable_update: UI updates were finally reenabled by application "TextEdit" after 5.36 seconds (server forcibly re-enabled them after 1.00 seconds)
quicklookd[68202]: generateImageInProcess Failed to composit image for binding VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: gif, UTI: com.compuserve.gif, fileType: ????.
quicklookd[68202]: generateImageInProcess Failed to composit image for binding VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: tiff, UTI: public.tiff, fileType: ????.
quicklookd[68202]: generateImageInProcess Failed to composit image for binding VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: gif, UTI: com.compuserve.gif, fileType: ????.
kernel[0]: Sandbox: xcscredd(164) deny file-read-metadata /private/var/root
--- last message repeated 11 times ---
birds-srv-03.local sandboxd[191] ([164]): xcscredd(164) deny file-read-metadata /private/var/root
--- last message repeated 7 times --- -
Error in the SMTP log of the mail service regarding "master.lock"
I am getting the following error in the SMTP log of the mail service, Anybody might have any suggestions:
postfix/master[87670]: fatal: open lock file /var/lib/postfix/master.lock: cannot open file: Permission denied.
The permissions of the master.lock file are as follows:
-rw------- 1 _postfix mail 33 Jul 7 10:25 master.lock
The Mail service stops after a few minutes from starting it
I appreciate your feedbackI found the problem.. the executable job was referring to a none existing batch file..
I have refreshed the database from production some time ago and the jobs I have setup are referring to production scripts and paths (which we didnt have on dev)..
This is now resolved.
Thanks -
SMTP vs. external mail service
I need to use SMTP on our webserver to send mail via a web form. However, we use an external 3rd party mail service and when the webserver passes the message for a @mydom.tld user to SMTP (Postfix), it gets passed on to dovecot and dumped in a local mailbox on the server (if the user name corresponds i.e. [email protected] => user account 'miles'). If the usernames don't match, _www gets the bounce message in its local mailbox. IMAP and POP are disabled.
DNS MX records point to the external service (with servers at priority 0, 10 and 20).
What I want to happen is for the SMTP server to send the message to the MX servers (the third party service) instead of trying to deliver it itself.
Here's what the SMTP logs say:
Feb 27 13:55:08 obelix postfix/pickup[52526]: E077C5FD068A: uid=70 from=<_www>
Feb 27 13:55:08 obelix postfix/cleanup[52547]: E077C5FD068A: message-id=<[email protected]>
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E077C5FD068A: from=<[email protected]>, size=581, nrcpt=1 (queue active)
Feb 27 13:55:08 obelix postfix/local[52549]: error: od[getpwnam_ext]: No record for user saskatoon
Feb 27 13:55:08 obelix postfix/pipe[52550]: E077C5FD068A: to=<[email protected]>, relay=dovecot, delay=0.04, delays=0.02/0.01/0/0.02, dsn=5.1.1, status=bounced (user unknown)
Feb 27 13:55:08 obelix postfix/cleanup[52547]: E87B85FD068C: message-id=<[email protected]>
Feb 27 13:55:08 obelix postfix/bounce[52552]: E077C5FD068A: sender non-delivery notification: E87B85FD068C
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E87B85FD068C: from=<>, size=2252, nrcpt=1 (queue active)
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E077C5FD068A: removed
Feb 27 13:55:08 obelix postfix/local[52549]: od[getpwnam_ext]: no attribute dsAttrTypeStandard:MailAttribute in record for user _www
Feb 27 13:55:08 obelix postfix/pipe[52550]: E87B85FD068C: to=<[email protected]>, relay=dovecot, delay=0.01, delays=0/0/0/0.01, dsn=2.0.0, status=sent (delivered via dovecot service)
Feb 27 13:55:08 obelix postfix/qmgr[52527]: E87B85FD068C: removed
From postconf -n:
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 10485760
mydestination = $myhostname, localhost.$mydomain, localhost, mydom.tld, $mydomain
mydomain = obelix.mydom.tld
mydomain_fallback = localhost
myhostname = obelix.mydom.tld
mynetworks = 127.0.0.0/8,10.198.186.90
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/*.mydom.tld.XXXXXXXXX.chain.pem
smtpd_tls_cert_file = /etc/certificates/*.mydom.tld.XXXXXXXXX.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/*.mydom.tld.XXXXXXXXX.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
Any and all help appreciated.
Thanks,
MilesWell, the big question is whether or not this server should accept mail for your domain, mydom.tld.
If it should, then this is appropriate - it sees a message for a domain that it's responsible for.
If, on the other hand, this server isn't responsible for your domain's mail then tell it so.
Right now you've told it that it SHOULD accept mail for mydom.tld:
mydestination = $myhostname, localhost.$mydomain, localhost, mydom.tld, $mydomain
So any mail addressed to any user @mydom.tld is going to get delivered locally. If that's not what you want, remove mydom.tld from mydestination and the message will follow the normal SMTP/MX rules. -
SMTP error from remote mail service
I am receiving a error that states"SMTP error from remote mail service" This is my work e-mail that is a out look e-mail service--but was put on my laptop in mozilla. If I test send e-mails to my gmail, aol and the work e-mail the work e-mail goes through (on the mozilla) but I get the error report for the gmail and aol test.
''Matt [[#answer-672468|said]]''
<blockquote>
what is the complete error message please.
</blockquote>
Hi Matt--thank you for reaching out to assist--here is the full error message I receive when I attempt to send emails--
SMTP error from remote mail server after end of data:
host p3nlsmtpcp-v01.prod.phx3.gdg [72.167.191.78]:
552 5.2.0 bT641p03m3RZ6FL01 :: CPANEL :: Message rejected for spam or virus content ::
Please include this entire message when contacting support ::
v=2.1 cv=Yecz5mhf c=1 sm=1 tr=0 p=dXr4a0FlAAAA:8 a=9P+wmFvZGoNcfX5LD2dIAQ==:117 a=9P+wmFvZGoNcfX5LD2dIAQ==:17 a=TZb1taSUAAAA:8 a=xSRs65CQCjkA:10 a=IkcTkHD0fZMA:10 a=o1OHuDzbAAAA:8 a=YNv0rlydsVwA:10 a=AK46IGkTethYI5b8t1AA:9 a=QEXdDO2ut3YA:10 a=RBqHpAr1aNgA:10 a=SZlYXZE0WA8A:10 a=POQKUN4lQn8A:10 a=5LQJebhDX5EA:10 a=lWHhIcKi20EA:10 a=AP_QpuyW5RgA:10 a=_ZmE1jEfA50A:10 a=fVc70mvjwYYA:10 a=BfRt8DTvoOQA:10 ::
100.00 -
Yahoo mail service(SMTP & POP3) to browser
I think Yahoo mail service(SMTP & POP3) is open only to browser. Is it possible to interact with Yahoo mail service thru URL Programming means thru URL programming to send retrive mail and attachment ? If so then how ? Plz help! It's urgent.
Thanx & Regards,
ChanchalIs it possible? Sure, it's possible, it's only software after all.
Has someone already done it? Not that I know of.
But then you already know that because you've already read
this FAQ entry, right?
http://java.sun.com/products/javamail/FAQ.html#webmail -
Mac mail service isnt listening on default ports at all other than SMTP
Mac mail service isnt listening on default ports at all other than SMTP.
I can port scan locally and here is what's listening
Port Scan has started…
Port Scanning host: <IPADDRESS>
Open TCP Port: 25 smtp
Open TCP Port: 53 domain
Open TCP Port: 80 http
Open TCP Port: 88 kerberos
Open TCP Port: 106 3com-tsmux
Open TCP Port: 311 asip-webadmin
Open TCP Port: 389 ldap
Open TCP Port: 443 https
Open TCP Port: 464 kpasswd
Open TCP Port: 587 submission
Open TCP Port: 625 dec_dlm
Open TCP Port: 749 kerberos-adm
Port Scan has completed…
Mail service is on.first place to start is always /var/log/system.log
stop/start mail service while watching that log.
You will probably catch some dovecot/imap lines that will yield clues.
Post results. -
Mail service on, SMTP on, but clients can't connect -- please help a novice
Hi all,
We use 10.4 Server on a G5 Xserve. A few days ago we had a problem with our server being used for spam. That was fixed quickly enough, but the problem is: while being fixed, the mail queue accumulated more and more mail, and it wasn't going out. The "retry" button didn't work. Repairing the database didn't work.
To make a long story shorter, after reading different things here and on the web, I managed to delete all the messages in the queue. All the users are still there. But now, when I turn the mail service back on, everyone gets a "can't connect" error.
I've used the terminal before, but I've always been following directions; I don't know what to type or why. But if someone with patience can help, I can follow directions, and would really appreciate the help. Right now I'm dead in the water.OK, I've already admitted that I know nothing about this, so I'm sure this will give some people some laughs. That's OK, so the only thing I've changed was the name of the company. I have more peace of mind knowing I'm not showing who's got problems. The other thing is that I don't know when my part of the history begins. Maybe it's all me, but I don't remember doing anything even remotely close to changing IPs. So here it is:
1 telnet mail.abcde.com 110
2 telnet mail.abcde.com 110
3 telnet mail.abcde.com 110
4 sudo /etc/squirrelmail/config/conf.pl
5 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/
6 update_list.txt
7 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/
8 update_list.txt
9 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/update_list.txt
10 softwareupdate
11 man changeip
12 changeip
13 exit
14 changeip -checkhostname
15 sudo changeip
16 changeip -checkhostname
17 sudo changeip -checkhostname
18 man changeip
19 sudo changeip -gethostname
20 sudo changeip -gethostname
21 sudo changeip
22 /usr/sbin/changeip /LDAPv3/127.0.0.1 10.10.10.3 10.10.10.3 mail.abcde.org mail.abcde.org
23 sudo changeip -checkhostname
24 sudo /usr/sbin/changeip /LDAPv3/127.0.0.1 10.10.10.3 10.10.10.3 mail.abcde.org mail.abcde.org
25 changeip -checkhostname
26 sudo changeip -checkhostname
27 sudo rm -rf /usr/share/swupd/html/061-4590/
28 sudo rm -rf /usr/share/swupd/html/061-4589/
29 sudo rm -rf /usr/share/swupd/html/061-4589
30 sudo rm -rf /usr/share/swupd/html/061-4590/
31 sudo rm -rf /usr/share/swupd/html/061-4590/
32 sudo rm -rf /usr/share/swupd/html/061-2089/
33 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/update_list.txt
34 sudo mkdir /usr/sieve
35 sudo mkdir /usr/sieve
36 sudo pico /etc/services
37 netstat -an | grep 2000
38 telnet localhost 2000
39 sudo mkdir -p /usr/sieve
40 sudo mkdir -p /usr/sieve
41 sudo chown cyrusimap /usr/sieve
42 sudo chgrp wheel /usr/sieve
43 cd
44 pwd
45 ls
46 cd /usr
47 ls
48 ls -l
49 exit
50 sudo pico /etc/services
51 telnet localhost 2000
52 netstat
53 netstat -an | grep 2000
54 exit
55 changeip
56 sudo changeip
57 changeip -checkhostname
58 sudo changeip -checkhostname
59 exit
60 sudo ls -al /var/spool/imap/user/diradmin
61 sudo ls -al /var/spool/imap/user/kbentley
62 sudo /usr/share/mailman/bin/check_perms -f
63 su root
64 su root
65 su root
66 su root
67 su root
68 fsck -f
69 fsck
70 sudo fsck -f
71 sudo fsck /?
72 fsck /help
73 fsck \help
74 pwd
75 ..
76 12345
77 sudo /System/Library/CoreServices/Finder.app/
78 sudo /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
79 su root
80 su root
81 sudo -u cyrusimap
82 su cyrus
83 su cyrus
84 su cyrus
85 su cyrus
86 su cyrus
87 cyrus
88 sudo cyrus
89 su cyrus
90 su cyrus
91 su cyrus /usr/bin/cyrus/bin/reconstruct -r -f /var/spool/imap/bbills
92 postfix reload
93 sudo postfix reload
94 sudo postfix reload
95 ls -l /var/spool/imap/user/bbills
96 history -
How do I set up Mail service for simple IMAP with SSL?
This should be easy but something isn't working. I have an Xserve with 10.6. I've enabled the Mail service, and want to add this server as an Account under Entourage. I've put in the IP address, my username/password, etc. but something isn't working. It appears under the Accounts folder tree, but when I try to send an email, I have a window that says "4.7.0 TLS not available due to local problem", Error -17099". I've also seen errors telling me the password is being sent in cleartext and I can't see where I enable the same (SSL, password needed) settings on the client and the server menus. Can someone clue me in - what are the right settings on both ends to have a simple IMAP w/o cleartext passwords? I had this working fine in 10.4 Server... Thanks!
MikeI see dropdown menus for SMTP SSL and IMAP/POP SSL. I have them both set as "Require"
Do not to this if your server is handling incoming mail from outside your network.
Few remote mail servers will use SSL, so if your server requires SSL then you will not be able to receive mail from outside your domain.
'Use', on the other hand, advertises the fact your server supports SSL, so clients and remote servers can use if if they like, but this still allows other mail in.
What should "Authentication" be - "Login" or "Plain"
Do not use Plain unless you absolutely trust all your clients (i.e. they're all on a LAN or all using SSL). Plain sends an unencrypted password over the wire, which is susceptible to sniffing.
what will the client be using?
Whatever you set it to.
The client complains about a correct root certificate not being installed).
Are you using a self-signed certificate? if so, you're going to get that unless you do a lot of extra work. Getting a real certificate from a trusted authority should resolve this.
As for the slow connections, the use of SSL shouldn't significantly impact connection or delivery/transfer times, so something else is amiss. -
Why cant i disable mail service ?
Mail service got enabled when I enabled some other services (don't know which one) i checked a couple and it got enabled, i tried to disable it then but it wouldn't let me, back then i didn't pay much attention to it so of course it's not configured. Right now the server is going crazy with disk IO, ran iotop and found out there are 2 processes to blame, 1 is mds (i'll murder spotlight soon) and the other is qmgr which from the man page i found it's mail related, my mail is hosted on gmail so i have no intention of using this service. If i click stop nothing happends, same if i uncheck it under services.
this is the ouput on the syslog when i try to stop
servermgrd[69]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) syncClientServicesConfigRecord]: Error writing ClientServices config record: Error Domain=com.apple.OpenDirectory Code=4001 UserInfo=0x10652ad30 "Unable to set value or values for dsAttrTypeStandard:XMLPlist in the record ClientServices."
servermgr_info: markrunning_servicesconfigured(): marked running services configured: com.apple.ServerAdmin.DNS, com.apple.ServerAdmin.SWUpdate, com.apple.ServerAdmin.Web, com.apple.ServerAdmin.NFS, com.apple.ServerAdmin.DirectoryServices
also, my syslog is full of
postfix/qmgr[3830]: warning: connect #1 to subsystem private/rewrite: Connection refused
I'm guessing it's required by some other service, i currently have...
DNS
Mail -> DIE
NFS
Open Directory
Software Update
Web
Xgrid - Stopped ( just testing )
Is there any way to kill it, or is my only way around it to figure out what's wrong with it (no one is using it for mail so i don't get why is it so busy).Unchecked 'Enable SMTP', 'Enable IMAP' and 'Enable POP', then checked 'Deliver to /var/mail
That seemed to 'disable the mail service'
As for disk usage, i'm running a cron job every minute so que queue had close to 6k mails it couldn't deliver. deleted them all " sudo postsuper -d ALL " and redirected output on the cron job to /dev/null -
Mail Services connection times out after 10.5.8 - 10.6.4 upgrade
I have been running a mail server on my macosxserver02.binghamton.edu (128.226.xx.x) for Podcast Producer email notifications only. The mail service has been running fine until I recently upgraded the server to Apple's latest server software: Snow Leopard Server (10.6.4).
After the upgrade I'm no longer able to receive mail to the mail server from outside it's domain (macosxserver02.binghamton.edu). I can send and receive mail locally from within that domain. I can send mail outside of the domain without any trouble to my personal email account [email protected], but not my work account: [email protected]. If I try to send from outside the domain -- say with my Binghamton Univ account -- the mail bounces back with this message:
Delivery to the following recipient has been delayed:
[email protected]
Message will be retried for 2 more day(s)
Technical details of temporary failure:
The recipient server did not accept our requests to connect. Learn more at http://mail.google.com/support/bin/answer.py?answer=7720
[macosxserver02.binghamton.edu (1): Connection timed out]
---- Original message -----
Received: by 10.224.102.202 with SMTP id h10mr6012071qao.49.1277903965341;
Wed, 30 Jun 2010 06:19:25 -0700 (PDT)
Return-Path: <[email protected]>
Received: from [128.226.62.7] ([128.226.62.7])
by mx.google.com with ESMTPS id v20sm41975621qce.46.2010.06.30.06.19.24
(version=TLSv1/SSLv3 cipher=RC4-MD5);
Wed, 30 Jun 2010 06:19:24 -0700 (PDT)
From: Cheryl Tarbox <[email protected]>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: another attempt
Date: Wed, 30 Jun 2010 09:19:22 -0400
Message-Id: <[email protected]>
To: [email protected],
[email protected]
Mime-Version: 1.0 (Apple Message framework v1078)
X-Mailer: Apple Mail (2.1078)
One thing to note about the .binghamton.edu domain is that we recently switched to Google Mail and .binghamton.edu is our branded domain within google.com.
DNS is managed on another server. I had an MX record added to my server this morning.
I have these ports open on my firewall: 143, 993, 25, 587 (POP is not enabled)
In ServerAdmin>Mail>Settings>Relay 'Accept SMTP relays only from these hosts and networks' is checked with
127.0.0.0/8
128.226.62.0/26 (my local subnet)
In ServerAdmin>Mail>Settings>Filters Junk Mail and Virus filtering is not enabled, so greylisting should not be a problem. I did confirm this line in main.cf: smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reje ct_unauth_destination permit
10MB quota is set, Mailing Lists not enabled, Logging set at Information
In ServerAdmin>Mail>Settings>Advanced>Security I am not using SSL. I do have a valid certificate that I would like to use after I get this back up and running.
In ServerAdmin>Mail>Settings>Hosting 'Include server's domain as local host alias' is checked with
localhost
binghamton.edu
Virtual hosting is not enabled.
Here is the output of: postconf -n:
macosxserver02:~ academic$ postconf -n
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = $double_bounce_sender
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter =
cyrus_sasl_config_path =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
data_directory = /var/lib/postfix
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_failed_cohort_limit = 1
default_destination_concurrency_limit = 20
default_destination_concurrency_negative_feedback = 1
default_destination_concurrency_positive_feedback = 1
default_destination_rate_delay = 0s
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
destination_concurrency_feedback_debug = no
detect_8bit_encoding_header = yes
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
empty_address_relayhost_maps_lookup_key =
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred,defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
hopcount_limit = 50
html_directory = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_body_checks =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_destination_rate_delay = $default_destination_rate_delay
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_header_checks =
lmtp_host_lookup = dns
lmtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mime_header_checks =
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_nested_header_checks =
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_cache_name =
lmtp_sasl_auth_cache_time = 90d
lmtp_sasl_auth_soft_bounce = yes
lmtp_sasl_mechanism_filter =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_fingerprint_cert_match =
lmtp_tls_fingerprint_digest = md5
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 9
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
local_destination_concurrency_limit = 2
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
local_destination_rate_delay = $default_destination_rate_delay
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_initial_destination_concurrency = $initial_destination_concurrency
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay = pcastadmin
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20080902
mail_spool_directory = /var/mail
mail_version = 2.5.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = dovecot
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 10485760
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_end_of_header_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, localhost, binghamton.edu, $mydomain
mydomain = binghamton.edu
mydomain_fallback = localhost
myhostname = macosxserver02.binghamton.edu
mynetworks = 127.0.0.0/8,128.226.62.0/26
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_client_port_logging = no
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
relay_destination_rate_delay = $default_destination_rate_delay
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_initial_destination_concurrency = $initial_destination_concurrency
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
send_cyrus_sasl_authzid = no
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
showq_service_name = showq
smtp_bind_address6 =
smtp_body_checks =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_destination_rate_delay = $default_destination_rate_delay
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_header_checks =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_initial_destination_concurrency = $initial_destination_concurrency
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mime_header_checks =
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_nested_header_checks =
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_cache_name =
smtp_sasl_auth_cache_time = 90d
smtp_sasl_auth_soft_bounce = yes
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_fingerprint_cert_match =
smtp_tls_fingerprint_digest = md5
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 9
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_port_logging = no
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = login,plain
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.cha in.pem
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 9
smtpd_tls_cert_file = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.cer t.pem
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_fingerprint_digest = md5
smtpd_tls_key_file = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.key .pem
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = no
stale_lock_time = 500s
stress =
strict_mailbox_ownership = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${data_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
use_getpwnam_ext = yes
use_od_delivery_path = no
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps =
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virtual_destination_rate_delay = $default_destination_rate_delay
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_initial_destination_concurrency = $initial_destination_concurrency
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
macosxserver02:~ academic$
Could someone please help me figure out what is wrong?
Cheryl Tarbox
Macintosh Support Specialist
Binghamton University
[email protected]I found two things that were causing my troubles.
First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
A big thank you to Gordon for looking into this and helping me get this resolved.
Cheryl -
How may I automatically stop and start Mail services at a set time please
Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>local.postfix.stop</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/serveradmin</string>
<string>stop</string>
<string>mail</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>1</integer>
<key>Minute</key>
<integer>00</integer>
</dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>local.postfix.start</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/serveradmin</string>
<string>start</string>
<string>mail</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>4</integer>
<key>Minute</key>
<integer>00</integer>
</dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?
Maybe you are looking for
-
How can i modify exe resource in java?
How can i modify exe resource in java? No jni thx.
-
Now that I have upgraded to Yosemite I have a problem when I scan documents. Formerly, a window showed today's activity. Now, I have to search through all the documents in my history to find what I just scanned. Sometimes I can't even find the doc
-
Hi, I'm trying to transfer the message from one trading partner to another. Its getting delivered successfully. I can only check the status on the Reports tab. But i'm not getting where it actually deliveres the payload. Is it delivering the messagea
-
NI 9871 460.8 kbaud works but not 921.6 kbaud
Hi, I have a PCIe-based RS422 card that can write to our NI 9871 cRIO module at 460.8 kbaud but the data is garbled at 921.6 kbaud (which is supposed to be supported ion the 9871). A loopback test on the PCIe card shows the 921.6 kbaud data is fine.
-
Dear Gurus, How we can maintain Machine Tools or vehicle for good movement (which was hired on rent basis) in SAP Pls suggest. Thanks in advance. Regards Pankaj Mishra