SMTP sender issue

I have a SQR reprot which send report via emails. Recently I have changed the SMTP sender to another e-mail address in the configuration file of app server and did a bounce of application server. Now the issue is that the emails are being sent with the old email address,so what might be the issue?Do we have to change the SMTP sender in the configuration file of the process scheduler?

Yes, since the SQR are managed by the Process Scheduler, you should modify the prcs config file.
Nicolas.

Similar Messages

  • Mac OS v10.6.1 Snow Leopard Mail SMTP Send issue

    Hi.. did the upgrade on SL to 10.6.1 mail still cannot send.
    My hosting server requires authentication prior to sending therefore I have made sure that the username and password are correct by accessing it via http.
    On some of my mailboxes they are greyed out and some are not an some have ! marks after them, used to work fine prior to the SL.
    Running on Peer1 network anyone else having similar issues.
    Mail on my server is not running SSL so that is not enabled in my mail client.

    Some have attributed their new success directly to the update. Many have simply found where some change in settings was needed to restore functionality. A few users of Comcast and Cox have some random issues that are not fully explained. I think most of those using Frontier actually got theirs working from something that Frontier did, and not Apple.
    The only thing I know was changed was a restoration of the ability to take a more manual approach to setting up accounts such as Gmail, allowing the user to choose to use POP rather than IMAP because of being able to hold down the Option key after nearly finishing the first screen of the setup assistant, and having the Create button change to Continue and not leap to the finish.
    Up until today I had 14 accounts and 5 SMTPs all working. I added to new Hotmail account, and allowed Mail to set it up automatically, and it was installed perfectly, and worked immediately to send and receive.
    Ernie

  • Bug? SMTP send hangs LabVIEW

    I am trying to send an email during an alarm state using the SMTP VIs included with LabVIEW (2013, have not tested 2012).  It seems that the SMTP send VI hangs LabVIEW while it is running to the point that my software doesn't start shutting down because LabVIEW is waiting for SMTP send.
    SMTP send is running parallel to everything else, so it shouldn't cause a hang just because it hasn't finished running.  The UI stops redrawing (i.e. if I open a window in front of the program and close it, LabVIEW doesn't redraw the front panel - I still see the old window), every parallel process in the code stops running, and the cursor changes to the busy cursor while it works away.
    Today at my office, this delay is 3-5 seconds.  Last week when testing at my customer, the delay was 20-30 seconds.  The email always gets sent, but it seems while it is logging into the mail server and doing whatever transactions are necessary, LabVIEW is non-responsive.
    Please note I am sending a 1-2 sentence email with no attachments.  I am not use SLL/TLS, although my server does require a username and password login.
    Is anyone else seeign this?
    Thanks,
    Matthew

    Joel,
    Same behavior.  As I noted in my original post, it locks up at send.  If you have a fast connection to your server and are sending a short messsage, you may not see it.  My server has a delay for loggin in and it is not internal, so it takes 5 seconds or so for it to login, and send the email.  During that time, LabVIEW is non-responsive.
    If you have a quick connection, you may need to try using the vi that sends attachments so the session with the server lasts longer.
    The issue is specifically with vi.lib\smtpClient\Send.vi.  It is password protected, so I cannot determine exactly what is locking up, but it is in there.
    For now, I found an example on the forums that is not very robust, but got me through the immediate problem.  It can send an email without locking up LabVIEW, so I know NI's code is doing something it probably shouldn't be.
    Matthew

  • SMTP send error

    I tried to send email to
    [email protected]
    using SMTP Send File vi
    and then I got an error 2100 saying
    "500 Syntax error, command "MIME-Version: 1.0" unrecognized"
    How can I send email to address like
    [email protected]?
    Thanks.

    I think your issue is the connection to the SMTP server.  First off, the smtp server for gmail (according to gmail help) is smtp.gmail.com, not smtp.google.com.  Secondly, the port for the gmail smtp server is 465, while the SMTP vi's by default open port 25.  Theoretically, you could edit the VI that opens a TCP port, but you would have to resave most of the smtp hierarchy to avoid changing the version saved in vi.lib.  Finally and most importantly, the gmail smtp server requires SSL encryption, which I have no idea how to start implementing. 
    So how do you send mail in LabVIEW? 
    I have had luck communicating with the internal servers set up by our IT dept because they apparently have no authenication or encryption methods to navigate.  In the non-corporate setting, I have also had luck using a free SMTP server.  When using this server, simply type "localhost" for the SMTP server.  Finally, you could take a look at the ActiveX option this post explores.
    Hope this helps.
    Spex
    National Instruments
    To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

  • I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    Try updating the printer driver.

  • SMTP send mail message

    SMTP send mail message is giving 'unkown mime version' error(error code 16500). The same mail server works when sending by Netscape mail.Any help greatly appreciated.

    Hi,
    There seem to be a bug in the OGIC_POP.llb\OGIC_POP_ListMessages.vi.
    Or at least it needs customization to process the response from each mail server. If you open the diagram for this VI, you'll see that it is using the "+OK\s" regular expression to reach the end of the string before the msg-number, msg-size list. In your case, this string is "+OK 5 messages (6190 octets)"
    You need to modify the diagram to skip this whole string. One easy way would be to use just "+OK" with the first Match Pattern fuinction and then use an "\r\n" and pass this to the true-case.
    I am attaching a screenshot of this. And I have tested this to work fine -- I get the messages in the array.
    Hope this helps,
    Khalid
    Attachments:
    modified_pop_listmsgs.bmp ‏1083 KB

  • Icloud 2.0 and outlook 2007 send issues

    icloud 2.0 and outlook 2007 send issues
    i cannot send email any longer in outlook 2007

    Look at this discussion:
    Re: Excel 2007 problem opening xlsx files when iCloud control panel is installed
    .... and the problem is still not solved (iCloud 3.1.0.40) and I guess will never be. We need to rename or delete the shellstreams.dll or save the excel-files as .xls to solve the problem for ourselves!
    What a shame!

  • SMTP send Multiple Atacchement.vi / labVIEW6.1

    こんにちは。
    現在、LabVIEW6.1のインターネットツールキットの中にある
    「SMTP send Multiple Atacchement.vi」を使用してEXCELファイルを
    添付してメール送信しております。
    メールを送信した相手先にメールが確実に届きますが、
    excelファイルのファイル名だけが文字化けしてしまいます。
    excelファイルの中身のデーターは文字化けは発生しておりません。
    excelファイルは日本語で名前をつけています。
    どうしたら、ファイル名だけの文字化けを防ぐことができるのか
    教えてください。
    よろしくお願い致します。

    お世話になっております。
    弊方で使用しているインターネットツールキットとのバージョンが違ったようで
    ファイル名等がこちらの指定しているものと異なっているようです。
    バージョンの違いに気づかず、大変に失礼いたしました。
    こちらのバージョンを変更して確認しましたところ
    確かに、「SMTP Email Format Header Field.vi」ではなくて「SMTP Format Header Field.vi」が有り
    また、その中に「SMTP Email ConvertToJISB64.vi」は有りませんでした。
    本バージョンでの対処方法としましては、「SMTP Format Header Field.vi」を任意の別名で保存した後に
    「header name (Subject: )」という文字列制御器を定数に変更し、空白の文字列にして下さい。
    変更し保存したVIを
    「SMTP send Multiple Atacchement.vi」＞＞「SMTP send Multiple Atacchements Message.vi」＞＞「MIME Send File Attachment.vi」＞＞「MIME Send Separator.vi」の「name」制御器の直後のワイヤに挿入するような形でワイヤし直します。
    元のワイヤを、「header content」端子に接続し、「encoded header line」端子から出力します。
    さらに、「character set」に文字列定数として、「ISO-2022-JP」を入力してください。
    以上の変更で、ファイル名をエンコードして送信できるようになると思われます。
    よろしくお願い申し上げます。

  • Z10 SMTP Email Sending Issues

    Hello
    Could you let me know if you have a workaround for the issue with not being able to send SMTP emails from the new Blackberry Z10 on build 10.0.10.82
    The message I get is 'Protocol Layer was unable to send a message'
    There is an ever growing discussion on the message boards….
    http://forums.crackberry.com/blackberry-z10-f254/unable-send-some-e-mails-protocol-layer-unable-send.../
    http://forums.crackberry.com/blackberry-z10-f254/heads-up-email-bug-recent-z10-os-versions-779341/
    http://forums.crackberry.com/blackberry-z10-f254/cant-send-e-mail-via-smtp-z10-785848/
    I have tried the following;
    Using a different port for smtp (currently using 465 with SSL)
    Tried turning SSL off and using port 25
    Tried using a local smtp from my service provider (Etisalat raher than auth.smtp.1and1.co.uk)
    Using a different email
    None of the above work.
    Any assistance much appreciated...

    6hugo9 wrote:
    Yes please -- it's annoying that March-2013 update has introduced such a crippling facility.
    I have IMAP and Exchange accounts setup, and all of my email accounts suffer this problem every day ..
    Quite dibilitating - and not good when this is my primary communication device... I dont look forward to having to resort to an Android based phone if this doesnt get fixed fairly soon 
    Regards
    @6hugo9 - I think that you are talking about two seperate issues, unless you are also using 1&1 as your email provider.
    @jjclarke - The 1&1 issue looks like it is being looked into, there is a KB article here. That said, the more of you that call into your Carrier's Blackberry support teams and report the issue, the more likely you are to get it resolved. You may even find that there is already a resolution in the pipeline waiting for Carrier's to OK the release of the updated software?
    @6hugo9 - you are listing a number of seperate issues in your linked threads. There is a bug that shows up on some servers over SMTP that the z10 is botching the HTML encoding on the emails (fortunately my server are not having this issue, knock on wood!), also others are having issues with ports being blocked (port 25 is quite frequently blocked by ISPs for anti-spam reasons) which would stop email from being sent.. as you wouldn't be able to connect to your server.
    Regardless, the best way to get to the bottom of that issue is also to call your carrier's Blackberry support team.. that will get the issue escalated on the development side. The "more the merrier", so to speak.
    A little birdie told me that when that SMTP encoding bug was introduced, the Blackberry support teams were swamped with calls.. So one has to assume that the devs were then working hard on resolving the issue. I imagine that we are all now waiting on our carriers for the fix to be sent through after they get done with the Carrier's "OS tests" that are always delaying our software updates.
    Best bet is always to call in and get a resolution, especially for extremely important issues like this one.
    -: DrewRead :-
    Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
    "Like it" if you like it.

  • Smtp - sending mail issues

    Bought a new Macbook Pro and have a home wireless connection (Orange). Can send and receive email (Pipex is my office ISP). Had to change smtp setting to Orange's in order to send mail.
    Problem: I intend to use my MacBook at various locations and have successfully logged into several wireless connections. Web browsing and receiving email no problem. Sending email never works other than at home?
    I cannot beleieve that I have to change smtp settings for every network I connect to in order to send email - It will be impossible.
    Pipex and Orange are not interested and offer no help at all. Help please.
    Not a .Mac user.
    MacBook Pro   Mac OS X (10.4.9)  
    MacBook Pro   Mac OS X (10.4.9)  

    Most networks block sending mail on port 25, except for their own customers.
    Ask Orange or Pipex (or google for it) if they have an alternate smtp port (like 587) that works instead of port 25.

  • Mail won't send.  dotMac SMTP server Issue?

    Using 10.4.8 and Mail. Mail won't send. Says to try a different server, but I don't have anything other than dotMac. Others are having the same problem. Anyone know a solution?

    Who is your Internet Service Provider? What is your current SMTP setting?

  • Smtp iCloud issue - Can't send thru iCloud smtp servers

    Dear Apple,
    it was so difficult TO COPY from Google Gmail??
    WHY they have an e-mail system "that's just work" and yor're still playing with squirrels in data centers??
    WHY I cannot merge my me.com, mobileme.com, appleid into a simple one deleting those are unused?
    And WHY I cannot delete my accounts from yor server?
    An answer from an Apple representative will be appreciated.
    Best.

    This is an Apple User forum, no Apple representatives here.

  • Email send issue using "Mail Server Load balancer"  (Cisco ACE 20)

    Please let me know if someone have experienced this kind of issue or any suggestions.
    The send email action was working file in MII with smtp mail server on port 25. Recently basis did a change in mail server ip address and they installed a new Load Balancer . The Load balancer is between SMTP and MII. After this change MII does not send email (unknown source error). now MII send email action has ip address or qualified path of Load balancer in MII send email configuration instead of direct ip address of SMTP server. Below is the error message in Net Weaver logs.
    MII still sends email if direct ip address of email server  provided but not through email Load balancer .
    Any suggestions ?
    Could not authenticate mail account (Unknown Source)
    [EXCEPTION]
    javax.mail.AuthenticationFailedException
    at javax.mail.Service.connect(Service.java:319)
    at javax.mail.Service.connect(Service.java:169)
    at javax.mail.Service.connect(Service.java:118)
    at com.sap.xmii.storage.connections.MailConnection.sendMail(MailConnection.java:202)
    at com.sap.xmii.bls.executables.actions.mail.MailActions.send(MailActions.java:223)
    at sun.reflect.GeneratedMethodAccessor1412.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Switch.doExecute(Switch.java:131)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Repeater.doExecute(Repeater.java:113)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:158)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.Illuminator.connectors.Xacute.XacuteRequestHandler.processQueryRequest(XacuteRequestHandler.java:342)
    at com.sap.xmii.Illuminator.connectors.Xacute.XacuteRequestHandler.QueryRequest(XacuteRequestHandler.java:135)
    at com.sap.xmii.Illuminator.connectors.Xacute.XacuteConnector.doProcessRequest(XacuteConnector.java:86)
    at com.sap.xmii.Illuminator.connectors.AbstractConnector.processRequest(AbstractConnector.java:83)
    at com.sap.xmii.Illuminator.server.QueryEngine.run(QueryEngine.java:41)
    at com.sap.xmii.Illuminator.services.handlers.IlluminatorService.processRequest(IlluminatorService.java:68)
    at com.sap.xmii.Illuminator.services.ServiceManager.run(ServiceManager.java:68)
    at com.sap.xmii.servlet.Illuminator.service(Illuminator.java:68)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    at com.sap.xmii.servlet.ServletRunner.run(ServletRunner.java:80)
    at com.sap.xmii.servlet.ServletRunner.run(ServletRunner.java:44)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.processServletRequest(ReportParser.java:610)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.parseServletTag(ReportParser.java:276)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.parseFile(ReportParser.java:154)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.parse(ReportParser.java:119)
    at com.sap.xmii.servlet.ReportServlet.service(ReportServlet.java:90)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
    at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:96)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
    at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:96)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
    at com.sap.xsrf.filter.XSRFProtectorFilter.doFilter(XSRFProtectorFilter.java:62)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:468)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388)
    at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
    at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
    at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
    at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327)
    Date:
    2014-03-25
    Time:
    14:04:06:176
    Category:
    com.sap.xmii.storage.connections.MailConnection
    Location:
    com.sap.xmii.storage.connections.MailConnection
    Application:
    sap.com/xapps~xmii~ear
    Thread:
    Thread[HTTP Worker [@629095796],5,Dedicated_Application_Thread]
    Data Source:
    j2ee\cluster\server0\log\defaultTrace_00.trc
    Arguments:
    DSR Transaction:

    Have a look at this thread please: 
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f11f3079-b04a-4a8e-b89e-d56eb0532c42/the-mail-could-not-be-sent-to-the-recipients-because-of-the-mail-server-failure-sending-mail-using?forum=sqldatabaseengine
    Saeid Hasani [sqldevelop]

  • SMTP, Sending, Not Sending?

    Here is the mail I sent the MAC shop with a couple of extras at the end
    For Email:
    My iBook G4 is running Tiger 10.4.11 and I never had any problems, it works great.
    My new MacBook running Leopard 10.5.1 has problems when on both wireless network and cdma network.
    I have set-up my 4 email accounts on my MacBook exactly the same as on my iBook but there is a problem when sending email on the MacBook.
    When I send email the following can happen:
    1) Activity viewer shows "Sending data (100% Done)" but it just stays there and does not send (screenshot attached).
    2) It starts to send and then stops and gives an SMTP Error (screenshot attached).
    3) The email sends but takes more than 5 minutes to send a 5kb email.
    I then try on iBook with same configuration and modem and no problem, I have also configured email accounts on DELL M1330 & Compaq Presario laptops and can send no problem using cdma and wireless.
    I have checked SMTP settings many times, including outgoing ports used and they are all correct.
    I even used the ISP's SMTP with limited success, it works now and then but still errors with the smtp error or the "Done 100%"......
    I am not sure if this is an issue related to Wireless or CDMA Modem I use....But it is driving me nuts and really am at a total loss as to what to do.
    Please help

    You may not have the same problem but what I did is worth a try.
    First, when I went to Leopard some of the outgoing settings didn't copy over. In MAC Mail I didn't get the send button to be available. Outgiong mail settings including the server and advaned settings must be what your ISP needs. My Yahoo mail would send fine but MAC Mail wouldn't. Mail>Prefrerences>Accounts - Outgoing Server - Edit Server > Advanced - Server, SSL, Authentication all must be correct.
    MAC Mail for some reason also requires a DNS server setting in the network setup.
    Under System Preferences, go to Network and add your DNS numbers for your ISP Server. Get the right numbers from your ISP. I did a search for "DNS" on the ATT/YAHOO member web site.
    This fixes the slow checking and sending of mail....It also fixes problems where mail sends slow and may give Authentication errors.
    I spent many hours on this and finally the answer was posted on this forum.

  • Mail not received sent through SMTP Send Mail Task

    Hi,
    I have a SSIS package which will send mail notifications. This package is deployed on Integration Services Catalogues as Project deployment. This package having a list of notifications regarding the task status.The receiver end got few
    notifications but missed of the notifications. This issue is not frequent. Sometimes we are getting all notifications. Sotimes missing some notification. All these using SMTP tasks with same SMTP connection. 
    I checked the task status in Standard Reports for all Executions. The task status for all these notification tasks are Success.
    What are the possible reasons for this?
    Thanks and regards,
    Muhammed Shakeer
    Muhammed Shakeer

    Hi Muhammed,
    If the issue happens sometime only and all executions was run successfully, then the issue should be caused by the SMTP server. The SMTP server may refuse the connections.
    To verify the cause, please:
    Check SMTP server log
    Enable logging for the SMTP task. Check the log after execution
    To understand how to enable Logging, please see:
    http://technet.microsoft.com/en-us/library/ms181205(v=sql.110).aspx
    Thanks,
    Jinchun Chen

Maybe you are looking for