SNC parameters in Connector properties of System in EP.

Can anyone explain the parameters that deal with SNC in the connector categories when we create a new System in EP.
I need to conenct to an R/3 backend system using SNC via portal. Currently i can aces that system using SNC but via the SAP Launch Pad.

Hi Jaynet, thanks for your reply.
My cells do contain values so that's no problem. It's a very simple setup where I have 2x6 cells with a couple of parameters that are to be used by all my connections in the workbook.
Using vb code to update the "forgotten" parameters inside the connections was something I also was thinking could be a solution. Just felt it would be a shame when the functionality for what I'm trying to do cleary has been built
in to excel in a very simple way through the UI.
Before I go down the vb route I'm gonna see if I can find more info about any fixes for this bug in excel, maybe a hot patch or something like that. (I can't speak vb so building such a thing is going to take a while for me as I have to take bits
and pieces I find around the web to get stuff working) :)

Similar Messages

Startup error: ldaprealm.properties (The system cannot find the file specified)

Hello,
I'm starting WebLogic from JBuilder 3.5; before using the LDAP realm
everything worked fine.
After adding the following entry to the weblogic.properties file
weblogic.security.realmClass=weblogic.security.ldaprealm.LDAPRealm
the WLS states following error message:
java.io.FileNotFoundException: ldaprealm.properties (The system cannot
find the file specified)
The ldaprealm.properties file is located in the WL_HOME dir (same location
as weblogic.properties)
I've start WLS with -Duser.dir=c:\weblogic, but it didn't affect my problem.
When starting WLS with startWebLogic.cmd, everything works fine but no
practicalbe for me,
because I've to start in form JBuilder in order to enable remote debugging.
Thanx for your help in advance,
Michael

http://www.bea.com/support/askbea/wls/S-06632.shtml
ldaprealm.properties has to be in %WinDir%\System32 to be picked up by a WLS 5.1 server run as a service and LDAPRealm enabled.
Still getting interesting LDAP errors, but the file is being picked up on startup.

Error: ldaprealm.properties (The system cannot find the file specified)

Hi,
I'm getting the following error message when starting up WLS
java.io.FileNotFoundException: ldaprealm.properties
(The system cannot find the file specified)
This seems to me as if ldaprealm.properties isn't in the
proper place/dir.
The docu tells me to put it to WL_HOME - and there
it resides.
I cannot start WLS with the startWebLogic.cmd file (which
alway works fine), because I'm forced to do it via JBuilder.
Maybe someone can tell me a property to change the
startup dir (-Duser.dir=c:\weblogic doesn't work)
thanx in advance,
Michael

http://www.bea.com/support/askbea/wls/S-06632.shtml
ldaprealm.properties has to be in %WinDir%\System32 to be picked up by a WLS 5.1 server run as a service and LDAPRealm enabled.
Still getting interesting LDAP errors, but the file is being picked up on startup.

Connector.properties server.id

I have a JRUN server app set up that has quit working after
replacing the hardware underneath it. The hard drive was cloned
using platespin, and the old server retired. It is a Windows 2000
SP4 server running the JRun4 app through IIS. I am wondering if the
server.id has changed because of the hardware change, but I can't
find documentation anywhere that tells me where the original
4-digit server.id comes from. It seems like it either came from a
command output of some kind, or was looked up as part of the server
properties, but I can't for the life of me find it. The server.id
goes into the SERVER_INF\connector.properties file for the app. Can
anyone help? Thanks In Advance!

Never mind. Dumb question of the day, I think.....

Connector properties

PT84:
The connectotr properties cn be defined at the Node level and also at the routing level.
Is it safe to say that the ones defined on the override the ones on the node and that we can define only a subset of the properties.
For e.g when using FTPTARGET, is it possible to define all propertied on the node's connector properties and only define the filename property on the routingn so that we no not need to create multiple nodes only becaused multiple files are being sent to the ftp server.

Is it safe to say that the ones defined on the override the ones on the node and that we can define only a subset of the propertiesThe routines have their own connector properties and override the node definition, I would tend to think it should be used for very specific needs.
But of course, every routines use their own definition according to the routine level properties, even if they use the message node definition for the common level.
Nicolas.

Will Dynamic Parameters remain connect if source system rebuild.

Hi Experts,
Will dynamic parameters remain connected if the source SAP system is formatted and rebuild.
Our Scenario
Now we pointed our Crystal Reports to SAP Ecc Tables.
SAP Systems : A
Client : 10;
IP : 192.xxx.xx.xx
Now the SAP Source system is formatting and going to rebuild with Production COPY.
but the system information (IP,SYS NO, Client No) will remain same .
My Question is : Do we need to re-point Dynamic parameters in the Crystal reports again? or connection remain.
Thanks,
BharathU

Hi Frischer,
If the copy is the exact same, meaning the query id, as well as the properties of the query are exactly the same, then it would work, as far as I know.
Even the prompts have id's and measures and dimensions too. If those are not the same, then I believe that you would need to remapp.
I hope this is a very helpful answer to you.
Kind regards,
John

Connection test for connectors(SAP R3 system) fail

Hi,
I got an EP system and connected to one existing R/3 system.For the same i have defined it in system landscape of EP.System administration ---> system configuration ---> system landscape.In property editor i have deined all the min required properties.
Application Host       172.16.3.68
Gateway Host            172.16.3.68
Gateway Service        sapgw00
Logical System Name    ISCCLNT100
Remote Host Type       3
SAP Client            100
SAP System ID (SID)    ISC
SAP System Number      00
Server Port            3200
System Type            SAP_R3
Trace Mode             1
The system intially works fine.But when
1)There are more users it gives connection error.
2)If there are not much users then also After some time it automatically shows connection error.
Then when I do Connection Test for Connectors,it shows "X" failed.
What I usally try to do,I restart the SQL server.
But this method does not work.I have to restart the EP.Then again the system works fine.
I think there are something wrong input in the property value of SAP R3 object setting.
Hey folks can u please help me in sorting out this problem?Why such connection error happens again and again?

Hi Rajeev,
Thanks for your answer.Actaully I have miss interpreted the problem.Sorry Problem is not with in the SAP R3.
Connection problem is like this::
I have defined a system EPSQL(system alias for MS SQL sever DB) for my EP instance
To connect to database.
The connection tests to the alias is ok.
But as more and more users try connecting to the db the connection test fails.
Restarting the SQL server doesnt help.
I have to restart the EP instance to get over the problem
I think there are something wrong input in the property value of object setting.or,EP maintains some timeout or max user info...
Do u have any solution?

Importing parameters not available in Production system

Hi Experts,
I am facing an issue after moving my objects into Production system.
I have created a calss and which contains five methods. Each method contains itsown importing parameter. There is one method to send mail, which contains three importing Parameters. I have captured this class and the methods in a TR and basis team moved this TR into production system.
The TR has moved successfully into the production system. But when I checked the Parameters of the class SEND_EMAIL has only one importing parameter insted of three.
Again I created a new TR and captured all the objects related to Class, which contains class definition, methods etc.
I have moved it to quality system successfuly. When I checked in quality i can see the three importing parametrs in SEND_EMAIL method.
This TR has moved to Production successfully. When I checked in production I can see only one importing parameter in SEND_EMAIL method.
But it is showing same active version in Quality and Production.
Please suggest me how can I resolve this issue?
Thanks
Pradeep.

Dear Pradeep
First you check the parameter which u are sending that are already in prd server exist or not
some there are some thing we can see which are available in qua those are not seen in production
see in se06 and try to modify the exact component to modifaible state
check sp pack of qua and prd are one and the same
check kernal rel level in both
check chmod and chown are same in both
Regards

Can i get the properties of System

Sir
i want to get the following properties of the system
1.What type of operating system install e.g win Xp or 98
2.How many hard disk are in the system
OR how many Partions of the system
3.Search the particular folder in the computer.
i study the System Class but these types of information
not available.Please Help me with Example.

1) See System.getProperties() for supported properties.
2) Dunno about # hard disks; while hard disks are applicable, it doesn't have direct analogs on UN*X
3) see java.io.File*
--A

Cell reference Parameters in Connection properties of Excel are not saved, how do I fix this?

Hi!
I'm using excels pivot table function to grab data from my MS access db through ODBC connection.
I've set up the connections with parameters for my selection criteria or the "where" clause if you read the SQL statement. The parameters I use refer to cell values on in my workbook.
My problem is that the parameters are empty every time I reopen the workbook. This creates several problems. If I attempt to refresh the connection Excel crashes. If I attempt to save the workbook excel will crash.
So I have to manually re-input the parameters for each connection I have in the workbook. The parameters function and the ability to use cell values as the parameters is great and opens up for great possibilities. But it seems it's not working?
I even opened the xml file in the .xlsx container and found where the information for the parameters reference is stored. And it was present the connections.xml as:
<parameter name="From YYYYMM" sqlType="4" parameterType="cell" cell="Admin!$C$5" />
Which tells me there is nothing wrong with my saved xlsx file.
Is there any way around the problem?
Regards, Erik

Hi Jaynet, thanks for your reply.
My cells do contain values so that's no problem. It's a very simple setup where I have 2x6 cells with a couple of parameters that are to be used by all my connections in the workbook.
Using vb code to update the "forgotten" parameters inside the connections was something I also was thinking could be a solution. Just felt it would be a shame when the functionality for what I'm trying to do cleary has been built
in to excel in a very simple way through the UI.
Before I go down the vb route I'm gonna see if I can find more info about any fixes for this bug in excel, maybe a hot patch or something like that. (I can't speak vb so building such a thing is going to take a while for me as I have to take bits
and pieces I find around the web to get stuff working) :)

Help with BI Report iView integration!

Hello,
I have been provided with a BI 7.0 Report URL (http://<BI FQDN>:8000/sap/bw/BEx?cmd=ldoc&infocube=<SUPPLIED INFOCUBE>&query=<SUPPLIED QUERY>&sap-language=EN) that i need to integrate into Portal as an iView. I have created BI System in the Portal System Landscape by entering following Parameters:
Connector Properties:
Logical System Name: <BI LS Name>
SAP Client: 100
SAP System ID (SID): B01
SAP System Number: 00
System Type: SAP_BW
User Management Properties:
Logon Method: UIDPW
User Mapping Type: admin, user
Web Application Server (Web AS) Properties:
Web AS Description: BI Web AS
Web AS Host Name: <BI FQDN>:8000
Web AS Path: /sap/bw/Bex
Web AS Protocol: http
After this i gave an alias SAP_BW for this system and then did the User Mapping for this system with my user account. Now i from PCD i am creating a New iView of type "SAP BW Report iView" and entered following parameters:
Application Verison: 7.x
Application Parameter: SAP_BW
BEx Web Application Query String: infocube=<SUPPLIED INFOCUBE>&query=<SUPPLIED QUERY>
Then when i do a PREVIEW test i get following message:
Service cannot be reached
What has happened?
URL http://<BI FQDN>:8000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher call was terminated because the corresponding service is not available.
Note
The termination occurred in system B01 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapb01_B01_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
If i execute the same query from Query Designer then also i get a error screen with an invalid URL in the address bar and a message in the body saying "The Page Cannot be Displayed". The URL that is pointed from Query Designer is:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<SUPPLIED QUERY>&VARIABLE_SCREEN=X&DUMMY=7
The same report gets perfectly executed from BI System. Can anyone please tell me why am i getting these error messages and how do i resolve? Please advice. Thanks.

Hi Vasu ,
I think you have a problem is due to BI-JAVA . Please check the links in below.
BI Java
Displaying BW3.x Objects on Portal 6.0 SP9 after upgrade to NW2004s BI
what exactly is in "BI java" ?
Regards,

SSO- Connection failed. Make sure user mapping is set correctly and all....

Hi All...
I configured SSO Between EP6.0 and BW 3.5...By following this tutorial:
http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
every thing is working fine... when i trying to check the preview for an iveiw (it is invoking BEx in the BW
System) it is again asking BW System username & Password. I already done user mapping between the
portal user with the BW user.
After i reviewd my entire work i got one problem at:
System Administration --> System configuration --> Portal content --> opened my created system object ->
Selected Connection Tests --> Select Connection test for Connectors --> Click on Test Button --> Here i
got the following error : Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection parameters are correct.
I checked the usermapping area and connector Parameters those all are correct according to the document.
I was stuck at this place from 4 days please advice me what are the causes for this error
Best Regards
Abhi...

Have you tested the SSO setting by running the program "RSPOR_SETUP"?
Yes Rajesh I tested by running the program RSPOR_SETUP in BW System.
It is saying connection is success to communicate with RFC Server.
The problem is comming from the portal side when i test connector properties for System object.
But it is saying WEB AS Connection properties are success for System object.
The exact Error Message is :
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Best Regards
Sudhakar A

How to define a BW/BI system in Portal using BI SAP Query Connector.

Hi,
How to define a BW/BI system in Portal using BI SAP Query Connector.
Portal>System Administration>System Configuration-->Portal Content >New System (from PAR)>com.sap.portal.systems.bi-->
How to retrive the parameters required from a BI 7.0 System.
Thanks

Hi,
You can refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/b0c8ce704d40fbb18312f8e65b4b0b/content.htm
Hope it will be helpful.
Best Regards,
Assaf Klieger

Developing 3rd party UWL Connectors for People soft system or other Java sy

Hi Everyone
We have one requirement that is u201CDeveloping 3rd party UWL Connectors for People soft system or other Java systemu201D and get the workflows from those system and display in portal though UWL.
We used u201CUWL Custom Connector APIu201D and written all the required methods.
Could any one help us u201CWhere can we specify the 3rd party system details?u201D
If possible please send some sample coding for it.
Thanks in advance
Sat

Hi Satya!
Like the default SAP backend UWL connectory your 3rd-party connector should make use of a PCD System Object. This system is a mere java component with nothing more than a portalapp.xml defining all the system properties.
Create a system in the portal system landscape based on the System PAR you depoyed.
For every UWL connector you create in portal you define a system alias. This alias has to match the one of your new system object.
And now for the sad part: I didn't find any clue yet about how to access the system from a custom UWL connector. The system alias is available in the method getItems(), but no hint whatsoever how to get the system object to the alias.
I'm still investigating this, since i'm exactly at this point.
Regards,
Juergen

Editing prtDefault.properties to set mandatory system language

I have seen a few threads suggesting that if you want to force a language for the portal to do it by editing the "prtDefault.properties " for the following two values:
request.mandatorylanguage=en
request.mandatorycountry=gb
However, I was curious if there is any other way to do this than editing a operating system level file. The "request.defaultlanguage" version of these parameters is editable in the System Administration -> System Config -> Service Config->Portal Runtime
Any chance there is a cleaner way to edit achieve this goal?

Hi,
prtDefault.properties can only be modified at operating system level. Save a copy of the old one, modify, save again and restart the portal afterwards.
The one at System Administration -> System Config -> Service Config->Portal Runtime is not prtDefault.properties. There you can only set the default language, not the mandatory one.
Anja

SNC parameters in Connector properties of System in EP.

Similar Messages

Maybe you are looking for