SNMP timeout from localhost

Hey guys,
I enabled SNMP to try to graph different things, and SNMP walk works but always times out after "hrSWRunPerfMem".
snmpwalk -v1 -c mycommunity localhost:
[snip]
HOST-RESOURCES-MIB::hrSWRunPerfMem.916 = INTEGER: 8656 KBytes
HOST-RESOURCES-MIB::hrSWRunPerfMem.926 = INTEGER: 4420 KBytes
HOST-RESOURCES-MIB::hrSWRunPerfMem.932 = INTEGER: 2800 KBytes
Timeout: No Response from localhost
After this error, I have to restart SNMP completely because it won't answer anymore. /var/log/snmpd.log shows nothing except the manual restarts.
I disabled almost everything except rocommunity and still get that error. There is no firewall enabled at all.
Any ideas?

Fixed by using net-snmp from Macports.

Similar Messages

Solaris 10 SNMP SMA error: community_check() : bad community from localhost

I enabled SMA SNMP on my Solaris 10 servers (SunOS 5.10 on i86pc) and now i receive a lot of errormessages in my logs with the following message:
Oct 13 09:57:41 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:41 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
Oct 13 09:57:42 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:42 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
Oct 13 09:57:43 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:43 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
i searched the internet but it seems that this error should be resolved in my Solaris version.
How can i resolve this error?

Hi,
Welcome to oracle forums :)
Refer links:
http://forums.sun.com/thread.jspa?threadID=5065724
http://www.sunmanagers.org/pipermail/sunmanagers/2006-November/042435.html
http://unix.derkeiler.com/Newsgroups/comp.unix.solaris/2004-07/0089.html
Hope helps
Regards,
X A H E E R

Snmpd: No response from localhost

Hi!
I recently have been messing around with my network cards in order to configure teaming.
Before this, I was using eth0 as my network card and snmpd was working perfectly.
After I achieved to use bond0 as a network device bonding eth0 + eth1, snmpd stopped responding.
Needless to say I restarted the daemon and tested if it is running
The snmp version I'm using is v1 and the config is pretty straightforward...... does anyone have a clue on what's going on? why suddenly snmp is not responding?
Whenever I parse "snmpwalk -v 1 -c read_only_user localhost" i get the message: "Timeout: No Response from localhost"
Thanks!

I think I fixed it:
I had to change the line of the systemd unit:
ExecStart=/usr/sbin/snmpd -p /var/run/snmpd.pid
Now it SEEMS to work.... fingers crossed
If this works... how to notify the package maintainer?
Last edited by Xi0N (2013-02-09 11:36:28)

LMS 4.0 Fault discovery snmp timeout

Hi all,
I am running LMS 4.0 on windows 2008 SP2 64-bit.
I have the problem that all devices from dcr stay in the questioned State with error state snmp timeout.
I have done a credential verification and snmpwalk to the devices and this works correctly.
regards
Joerg

Joerg,
What kind of devices are they that are being questioned?
Make sure Fault Management in 4.0 supports the devices.
Rob

WLSE Configuration archive download SNMP timeout

HI, I´m new to WLSE. My AP´s are already discovered and managed, but when I try to download the configuration archive from them, the Job Always fail with a SNMP timeout error message. This problem occur in the upgrade firmware job too.
Whe I go to reports, device center, I can see the AP configuration, but in the configuration>archives>view archive I have nothing.
I appreciate your help

You can configure the timeout value by selecting Firmware > Advanced Parameters. From this option you can change the "Per device job operation timeout value" to a higher value

Mail Server issues: non-SMTP command from localhost

I just installed Yosemite server. Noticed these messages showing up in the log:
Oct 28 06:32:08 my_server.net postfix/smtpd[28380]: warning: non-SMTP command from localhost[127.0.0.1]: From: Mrs. M.M Macheda <[email protected]>
Oct 28 06:32:08 my_server.net postfix/smtpd[28382]: warning: non-SMTP command from localhost[127.0.0.1]: From: Mrs. M.M Macheda <[email protected]>
Oct 28 06:32:08 my_server.net postfix/smtpd[28380]: disconnect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/smtpd[28382]: disconnect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52786 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52786
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52787 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52787
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52788 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52788
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52789 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52789
Oct 28 06:32:08 my_server.net postfix/smtpd[28371]: connect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/smtpd[28371]: improper command pipelining after EHLO from localhost[127.0.0.1]: MAIL FROM:<[email protected]>\\r\\nRCPT TO:<[email protected]\\r>\\r\\nDATA\\r\\nFrom: Mrs. M.M Macheda
Oct 28 06:32:08 my_server.net postfix/smtpd[28386]: connect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/smtpd[28386]: improper command pipelining after EHLO from localhost[127.0.0.1]: MAIL FROM:<[email protected]>\\r\\nRCPT TO:<[email protected]\\r>\\r\\nDATA\\r\\nFrom: Mrs. M.M Macheda <he
Here is output of postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5
html_directory = /usr/share/doc/postfix/html
inet_interfaces = loopback-only
inet_protocols = all
mail_owner = _postfix
mailbox_size_limit = 0
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
message_size_limit = 10485760
mynetworks = 127.0.0.0/8, [::1]/128
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated permit
smtpd_tls_ciphers = medium
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
Except me nobody has access to the server yet. Nobody is sending out any emails. Appreciate any help.

What does /var/log/mail.log have to say (you may need to increase logging level to "Information")?

DNS timeout from Google crawl

Hey all,
I've just registered my new site with Google webmaster tools, built a sitemap with Rage Sitemap Automator and I'm getting a DNS lookup timeout from the main domain name.
I'm using my own domain name, and the time out is coming from the name on its own, ie. www.hazelmills.com
Could this be because I should not include this domain in the site map without the name of the site and index? ie. www.hazelmills.com/microsite/enter.html ??
Any advise gratefully received.
Cheers,
TJ

Hey all,
I've just registered my new site with Google webmaster tools, built a sitemap with Rage Sitemap Automator and I'm getting a DNS lookup timeout from the main domain name.
I'm using my own domain name, and the time out is coming from the name on its own, ie. www.hazelmills.com
Could this be because I should not include this domain in the site map without the name of the site and index? ie. www.hazelmills.com/microsite/enter.html ??
Any advise gratefully received.
Cheers,
TJ

Sending alerts as SNMP-Traps from Solman to Nagios

Hi!
we would like to set up the alerting structure for sending the alerts as SNMP-Traps from Solman to Nagios.
The questions:
1) Is such integration possible? If yes, how complexe?
2) What are the technical steps to perform in order to realize these steps?
3) What are the steps to perform on Nagios server?
Thank you very much!
regards
H. Thomasson

Hello Prasad,
a search for SNMP in the Online Documentation returns [Sending and Receiving Alerts Using SNMP Traps|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ff/0620fbf6a404479d48b9e24552f770/frameset.htm].
Regards, Michael

SNMP Requests from Solaris

Hi, I am new to Solaris and have some questions about SNMP.
Does Solaris (9,10) include any binaries that allow you to make SNMP request to external equipment such as routers or other SNMP hardware?
I am considering the possibility of using a shell script to pull SNMP data from network elements, save it to a text file and render it to a web page.
Does that sound about right? I figured if binaries exist for this than it should be doable.
Thanks
j

Hi, I am new to Solaris and have some questions about SNMP.
Does Solaris (9,10) include any binaries that allow you to make SNMP request to external equipment such as routers or other SNMP hardware?
I am considering the possibility of using a shell script to pull SNMP data from network elements, save it to a text file and render it to a web page.
Does that sound about right? I figured if binaries exist for this than it should be doable.
Thanks
j

SNMP traps from EMC SRM to SCOM 2012 R2

Hi,
I'm trying to configure SCOM 2012 R2 as an SNMP trap listner. I've seen many articles on setting this up but all are based around SNMP traps from network devices which must first be discovered and identified in the network device list.
However in my scenario I am trying to monitor/listen for traps send by a Linux box hosting EMC SRM - this management software can be configured to send SNMP traps out so it is these that I need to try and listen for/capture.
So can anyone explain how I can configure SCOM 2012 R2 to do this. I have tried to just used the IP of the Linux box and discover it as a network device but it fails - in Network Devices Pending Mgmt it says No response Ping, even though I can
ping the box from the Server OK - so I am guessing you cant cheat scom in discovering the Linux box as a network device in ths way?
Can anyone offer any advice for setting this up. Just to add I've ensured the RunAs Community String (public) and SNMP version is correct on both side...
Cheers...

Once the Network Device (Linux server in this case) is discovered you will still need a rule that targets that class and accepts incoming SNMP Traps for that OID, or All OIDs if you prefer. I found 2 links that may be of help, the first is just a basic
overview of the SNMP listener in SCOM 2012 as it has changed from the OS Listener in 2007 to a dedicated one.
http://systemcentertech.com/2012/05/17/scom-2012-built-in-snmp-trap-listener/
The second link covers SNMP setup, but starting at Step 7 there is a great how-to on creating your own SNMP rule which will be needed to collect your traps.
http://scom-2012.blogspot.com/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
www.Practice2Perfect.com

SNMP traps from BPEL

Hi
I have a requirement to send SNMP traps from BPEL. I am using FMW11.1.1.3 over weblogic.
I was going through some documentation where i could see that SNMP traps can be created from the Weblogic Server console. Can some one help me on how to generate and sent the traps through SNMP.
Thanks
Vamsi

Yes, I think the Network Devices need to be discovered first in order to receive traps and generate alerts.
Juke Chou
TechNet Community Support

SNMP traps from HP NNMi - SCOM

Hi,
We wan't to forward snmp traps from hp nnmi to scom.
I have found a description of a solution for this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/19c29988-dfe8-4918-b0d5-f3124bcfea95/operations-manager-and-hewlett-packard-nnmi?forum=operationsmanagergeneral
I have added a server as snmp device. By using snmptrapgen I have also confirmed that the traps are received from scom.
In NNM I have specified that all traps are to be forwarded to the server which is discovered as a network device. I have also activated the snmp services and set the correct settings. These traps have not been received in scom.
Have I understood this correctly? If NNMi just forwards the traps, will not the traps have source IPs which is not registered as network devices in SCOM, and therefor be discarded?
I would very much like to hear from people how have done a simular type of integration :)
Thanks in advance, Best Regards

Yes, I think the Network Devices need to be discovered first in order to receive traps and generate alerts.
Juke Chou
TechNet Community Support

Certificate chain received from localhost 127.0.0.1 failed hostname verification check.

Hello friends. The dns name of our server recently changed. Since that time,
nothing except the administration node will start up. Server logs reveal the
following information:
Certificate chain received from localhost - 127.0.0.1 failed hostname verification
check. Certificate contained COTHUBT but check expected localhost>
There is one trusted certificate that was added to the cacerts keystore. Does
it need to be removed and re added? Any other insight would be appreciated.

"brain" <[email protected]> wrote:
Try this if you're running version 8
In the admin node gui.
Click on machines
Click on the NodeManager tab for the machine that you are interested in.
Change hostname in listen address.
Bounce the app server
>
Hello friends. The dns name of our server recently changed. Since that
time,
nothing except the administration node will start up. Server logs reveal
the
following information:
Certificate chain received from localhost - 127.0.0.1 failed hostname
verification
check. Certificate contained COTHUBT but check expected localhost>
There is one trusted certificate that was added to the cacerts keystore.
Does
it need to be removed and re added? Any other insight would be appreciated.

Can't load jdbc driver from localhost

I'm having problems loading the jdbc driver from localhost when using a java com object in ASP.
The simple class compiles fine and runs perfect from dos command line but gives this exception when run from personal webserver:
java.lang.ClassNotFoundException: sun/jdbc/odbc/JdbcOdbcDriver
Obviously, it is not finding the jdbc driver, but what is the problem? It finds the driver when run from dos locally. Do I need a 3rd party driver when using as a COM object?
Here is a code snippet:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection TestConnection = DriverManager.getConnection("jdbc:odbc:systemDSN", "username", "password");
Any help is appreciated, thanks!

I don't think it's exactly a classpath problem. I think when you run from the DOS command line, you are using the java.exe program that contains Sun's JVM and all the associated classes including sun/jdbc/odbc/JdbcOdbcDriver. But when you use this Java COM object (which I am not familiar with), if it doesn't find that class then it must be using the Microsoft VM, which naturally doesn't include that class you are having a problem with.

LMS 3.2 DFM-all devices QUESTIONED-SNMP Timeout

I imported 26 devices to DFM. All devices became QUESTIONED, error is SNMP timeout. Here are the troubleshooting steps that I tried:
1. rediscovered devices
2. deleted and rediscovered devices
3. increase snmp timeout settings
4.re-entered snmp strings in device credentials
But I still get the same result.I noticed that devices become questioned so fast.Any advise on this?

Hi,
What version of SNMP you are using on these 26 devices ?Try to do the following:
- Go to Device Center
- Select one device for test
- click on "check device credentials", select SNMP according to the version you are using.
- See the results.
May be you get more technical and detailed information about the SNMP timeout error. I have already experienced some problems using SNMP v3. The problem was resolved when I configured the SNMP v2c instead of v3.
Also, I suggest you to try do "SNMP walk" test in the Device Center. If you get some results reading, for example, the value of "sysObjectId", just verify the Credentials Settings in DCR. You can edit the Credentials trhough the Device Center -> Edit device credentials.
Regards,
Wando N. Rocha

SNMP timeout from localhost

Similar Messages

Maybe you are looking for