Snote 717452 having the status of "cannot be implemented"

Dear all...
While implementing Snote 717452 having the status of "cannot be implemented".
is there any solution for this..
Thanks,

Also... it might not apply to your system or simply your SP level already cover the note...
Read the note details
Regards
Juan

Similar Messages

  • While Changing the status system gives error

    Dear Experts,
    In Solution Manger,  While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
    Document 8000002519 refused for technical reasons: ERROR_FREE
    Message no. SOCM_ACTION_LOG203
    Diagnosis
    The status value cannot be changed.
    The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
    System Response
    This change transaction is skipped during report processing.
    Procedure
    Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
    Also if i select the status as in process, then it executes sucessfully.  Please help me in this.
    Ramesh Jaiswal
    9867936636

    Hi Ramesh,
    Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
    I just checked.
    So it seems this is availabe only after SP18.... we can use the above report.
    Kindly confirm once you solve your problem.
    Dirk
    Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
    Regards
    Prakhar

  • Changing the Status profile in QM

    Hi,
    The status profile (QM_L_001 - Inspection lot profile1) in the Quality Inspection Lot is been manually entered and saved.
    This has set the User Status as IMAT: Material is not correct.
    Due to this, unable to do any of the further processing.
    In QA02, the Status Profile cannot be changed/deleted.
    So how to remove the Status Profile from the Quality Inspection Lot?
    Request your help.
    Regards,
    Sankar.N

    Hi
    An other workaround, you can go to the transaction BS02 and change the status profile to allow the status can execute the following actions temporarily.
    Leon.
    Regards.

  • HT2729 i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer.  is this related to not having the proper itunes version vs ios?  I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...

    i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer.  is this related to not having the proper itunes version vs ios?  I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...any ideas what's wrong?

    Hi Dennis!
    I have a couple of steps for you to try in order to get those songs transferred to your iPod touch. First, make sure all of your software is updated with the latest versions. If the songs were downloaded from iTunes, you will also want to delete the songs from your library and then download them again from the list of past purchases on your iTunes account. An article about doing that can be found here:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    If you try a sync after those two steps and are still seeing the issue, then I would like you to try syncing the iPod by setting it to manually manage. An article outlining more information on manually managing your iPod sync can be found here:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    If you are still having issues after that, I have another article that can outline some other reasons why your songs may not transfer to your iPod, and it can be found here:
    Some songs in iTunes won't copy to iPod
    http://support.apple.com/kb/TS1420
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • My 4s is having a problem with person on the other end cannot hear me or my voice is garbled.  I have to hold the phone in a very specific place to my face for them to hear me.

    For about two months my iphone 4s has been having problems with people I call not being able to hear me or understand what I am saying.  I can get them to hear my by adjusting the position of the phone on my face, it is a very narrow space and I dont get it just right the receiving party cannot hear me.
    I have read similar discussions with no real fix to the problems.  I have cleanout every orifice of the phone, turn it off and on, reboot to no improvement.
    Any other suggests.

    Hi Labjock,
    Welcome to the Support Communities!
    The article below may be able to help you with this. 
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Cheers,
    - Judy

  • I'm having the oddest situation...  On my 13" MBP, when trying to enter text into a Facebook comment box; my delete key is totally non-functional.  I works just fine everywhere else, just not in the comment box.  Cannot delete characters.

    I'm having the oddest situation.  When I attempt to enter text into a Facebook comment box, my "delete" key doesn't work.
    It's just fine EVERYWHERE else, I just cannot delete characters from a comment box.
    What might I be missing?  I don't know what's up.
    JP
    MacBook Pro Retina 13"
    Safari 8.0.2
    Yosemite 10.10.1

    I'm having the oddest situation.  When I attempt to enter text into a Facebook comment box, my "delete" key doesn't work.
    It's just fine EVERYWHERE else, I just cannot delete characters from a comment box.
    What might I be missing?  I don't know what's up.
    JP
    MacBook Pro Retina 13"
    Safari 8.0.2
    Yosemite 10.10.1

  • I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.

    I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.
    Both these situations have cropped up on my MacBook Pro since the last update.
    Thanks for your help.
    Cheers
    Bob

    The 'Winmail.dat' problem has been extensively covered in these forums, I would search for that (a Google search works well) and unfortunately I have not seen the pdf print problem before, but assuming the software is current and functions normally (other than the pdf print problem) I have no suggestion other than the obvious (but time consuming) re-installation of Office.
    I wish I had more

  • TS1406 I have itunes 10.5.5 and iam trying to upgrade to 10.7, having installed ios6 on my wirelessly, my itunes is out of date and cannot sync to my phone. When try and update, I get the message pathway cannot be found please choose another pathway to in

    I have itunes 10.5.5 and iam trying to upgrade to 10.7, having installed ios6 on my phone wirelessly, my itunes is out of date and cannot sync to my phone. When I try and update, I get the message pathway cannot be found please choose another pathway to install? So it gives me 1 more option but same outcome.
    Running Xp but cannot also uninstall Itunes, it simply wont let me. Please help me???

    When I try and update, I get the message pathway cannot be found please choose another pathway to install?
    Which particular .msi file is the message going on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • I am having the same problem I think.  With mobileme you simply copy documents to the idisk folder and then synch.  I cannot seem to sink that folder anymore.  Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF file

    I am having the same problem I think.  With mobileme you simply copy documents to the idisk folder and then synch.  I cannot seem to sink that folder anymore.  Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?

    Apple never bopthered to explain that this would happen
    Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
    , so I could easily have lost ALL of the files I kept on iDisk.
    No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
    Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
    Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
    Apple has made no effort to suggest remedies for the problem it has given iDisk users
    They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice.

  • I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things  to do this but I cannot figure it out. thanks

    I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things  to do this but I cannot figure it out. thanks in advance.

    Thats the problem I bought it from a very large thrift store. i went back asked the person where I bought the computer he said we can not give you the password. I thought buying it there was a good idea because not only was it a nice deal but it was like I was maknig a donation. I know that i messed up because i do not have the installation disk. I bought it without thinking. Until recently I was still using an old G4 9.0 os. I guess you can say I have been out of the loop for a while.

  • I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create

    I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create files in the temporary file location  /var/folders/jv/2bct456j0yg4ys681fxk9zq00000gn/T " don't know what has happended in 24 hrs except I did check my permissions on my main directory to ensure that I had extended permissions to all the folders contained within my main drive on my IMac running OSX 10.10

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • HT4623 i have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? help??

    I have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? any suggestions?

    The activation servers are probably overloaded with everyone trying to update to iOS 7 today.  You might need to wait and try again later. 

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • I've just updated my iPhone 4 and now cannot add events in iCal. Anyone having the same problem?  Thanks!

    I've just updated my iPhone 4 to 5.0.1 and now cannot add events in iCal. Anyone having the same problem?  Thanks!

    The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
    Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
    Still unnecessarily difficult, but not as bad as copy/paste.
    What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online?

Maybe you are looking for