So based on the latest update #2 there's no workaround at all until the fix is pushed out?!?

Would 'CREATE APP' be the best alternative until Id CS6 and Adobe Viewer are updated?

There is a workaround. Upload your Folios to your account using Folio Builder Panel. On you iPad, login with the same account in Adobe Content Viewer. You'll have your Folio over there to preview.

Similar Messages

My iPad mini won't install the latest update because there isn't enough stprGe. I have deleted everything from my iPad and there still isn't enough storge.

My iPad mini won't install the latest update because there isn't enough stprGe. I have deleted everything from my iPad and there still isn't enough storge.

Connect your iPad to your computer and run iTunes. Select your iPad in iTunes and try to run the update there. Updating requires a lot less free space on the iPad when updating through iTunes on a computer because the update files will be downloaded to and extracted on the computer.

After downloading the latest update my pc has no sound at all, can anyone help?

after downloading the latest update my pc has no sound at all, can anyone help?

Try reading the suggestions here: http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/

I download the latest update and now I can't find all my photos; where would they go?

I download the latest update and now I can't find all my photos; where would they go?

Photos taken by the iPhone, like any digital camera, should have been uploaded to your computer for safe keeping. Certainly before a major operation like a software update that wipes your phone in the process of updating. If they weren't, and they are not currently on your phone, then they're gone. You can try restoring from a recent backup, but any photos taken between the last backup and the present time will be gone.

I have an ipod touch 4th gen, installed the latest update to iOS 6 and have lost all my music. Where did it go?

I have an ipod touch 4th gen, installed the latest update to iOS 6 and have lost all my music, apps etc. It also linked up with an alternate email address???? Help!

I have a similar issue happenning with my ipod touch 64GB running IOS 6.0.1. My music content is stored via itunes on my Snow Leopard macbook pro as well (and not in the cloud). The music on my ipod (which is sync'd to my macbook pro when I connect via usb) has randomly disappeared about 3 or 4 times lately, not during sync'ing and unrelated to battery charge levels. Fortunately I have been able to restore it by restarting my macbook pro then re-syncing the ipod, which it is now doing as I write, but it takes hours (for over 3000 songs). Having looked at a few other forum discussion pages, it seems this may be a bug related to IOS 6 updates and using music/itunes and podcast playing apps. The same thing has intermittently occurred with some other content such as downloaded podcasts, iplayer content and photos. Once I reconnected the ipod it synced and apparently restored the content, but I can't understand why it lost it in the first place, and its very annoying. Lets hope the reinstalling works on my ipod tonight....up to 248 of 3326 songs syncing as I write....

DIO Pass or Fail Tests: LabVIEW would have to determine the expected result or results (1 or 2 of a possible 25) based on the output pattern send out (1 of 65K).

I am trying to come up with a plan to write a LabVIEW VI to do the following test. Can you give me a few ideas how to do this in LabVIEW. I am a new to LabView. I think I how to read and write I/O ports and do comparisons. I need a little guidance on the error checking. In simple terms the test will go like this:
I have 16 digital inputs and 16 outputs.
The 16 outputs are turned on in a specific pattern (i.e. 1001000101011101) and then the 16 inputs (i.e. 1000101111111111) are read in after a time delay. The inputs are checked to see if they match the expected results. If they do it's a pass if not it's a f
ailure. This seems pretty straightforward. And I think I have an idea how to do it. Here's the problem. The inputs are changed sequentially so that all possible combinations are tried. The test needs to determine if the resulting input pattern is correct based on the outputs that were sent out. 16 outputs give 65K possible tests. For each tests there would be 1 or 2 possible results with a total of 25 results for the entire 65K possible tests. LabVIEW would have to determine the expected result or results (1 or 2 of the 25) based on the output pattern send out (1 of 65K). Then it would have to compare the actual input pattern received to see if it's a pass or fail?
Any ideas how I can approach this?

The 16 outputs are simulating inputs to the device under test, (simulating remote switches and contacts). The object of the test is to test every possible combination to ensure that nothing unexpected happens at the output. The device under test is a logic motor control system and we want to make sure (among other things) that we don’t start or stop the motor when its not suppose to. How can only two tests do that?
I think you are describing how to create an array with the results. But I still don’t know how to determine what the result should be and if it is correct.
I’ve identified 25 possible valid states the motor controller can be in.
I’ve also identified the correct outputs that determine each of the 25 states.
I’ve also
identified the possible valid states you can go to from each (previous) state, You can only get to a valid new state from a previous state if the right combination of inputs is applied (we hope).
If you know what state you are in when start and you know the valid states you can go to and the inputs required to get there, you should be able test the system against that. You verify this by checking the outputs against what they should be. With 65K possible inputs combination, checking them all manually would be quite is a task. Putting this into LabView is my task.

I recently downloaded the latest update for my Ipod Touch and now all the music I had downloaded (not from Itunes)....can I restore those songs now that there were 350 of them and they are gone? Thanks

I recently downloaded the latest update for my Ipod touch. When I finished all the music that was downloaded to it was gone. I really need help from any one that knows how to restore music - not bought from Itunes - to my Ipod touch. Thank you very much

Per Rysz' suggestion, configure accordingly:

None of the drop down menus work they r highlighted gray so I can't access them got the latest updates running lion. 10.7.2 all software is up to date

Just updated everything but when I open iTunes all my drop down menus are gray and I can't selecte them. To close out iTunes I have to use command option esc and force quit because all drop down menus and shaded gray and I can't access them

1 - the sudden disappearance of my 22 mailboxes, used to sort the emails that I need to file for future use
That was most likely the result of some kind of corruption, as I've already said, not a bug in Mail. Have you repaired the hard drive with Disk Utility recently? That wouldn't be a bad idea.
2 - at random times, mail (or the server) says that my password is incorrect and I must reenter (fix: usually I can quit mail, restart, and the connection is restored without reentering my password)
This is a known issue, where a failure to respond promptly on the server's end mimics what happens when the password is rejected. There's no need to quit Mail, just cancel when asked to enter the password, take the account back online and try again.
3 - mail seems to resort the mail in my mailboxes at random time. Several times a day, I must reset the sort to (a) by date; (b) by desending
Never seen that before. That points more to some kind of possible corruption in your Mail data or preference files.

HT4623 My 4S is stuck in a loop. I tried to download the latest update, and there was an error. Now, it keeps attempting to recover, fails, and starts the loop all over again. I can't use the phone, and can't fix it either, please help!!!

Please help!

you may have to do these steps a few times http://support.apple.com/kb/HT1808

Latest update to iPhoto 9.4 has left all the videos stored in iPhoto un-viewable.

I applied the latest iPhoto update as of 9/26/12 and now all the videos in my library throw an error of "A necessary data reference could not be resolved.".
I restored my library and tried again, (get notice that library must be updated and will no long work with previous versions as before), and it still corrupts
all my video. Tried all the options in the rebuilding process, (hold command & option keys when starting iPhoto), but still having no success.
Any suggestions would be much appreciated.

Select one of the video thumbnails and use the File ➙ Reveal in Finder ➙ Original File menu option. That should take you to the folder in the library that contains the original video clip. See if it does and if you can play it from outside of iPhoto. This is to check to see if the original files are there and in working order.
OT

HT5654 i've updated my itunes with the latest update. now it doesn't open at all and i can't access anything on itunes. I have tried every soltio posted and still doesn't work. How do i fix this????

itunes doesn't open or work after update. Tried everything still doesn't work. HOW CAN I FIX THIS??????

Hello, llynitta.
Here are the best resources for troubleshooting the issue you are experiencing.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Jason H.

Recent Sky+HD Firmware Update Is there a way to see ALL and SCHEDULED together.

Is it possible to view the ALL (preferably A-Z) tab as before, i.e. Everything including scheduled, it is a pain to flip between the ALL (or A-Z) and SCHEDULED tabs.

yes thanks for that confirmation, I had noticed the sky+app is now much better than the TV app, but how soon will they wreck that as well! And one doesn't always have a device with the sky+app handy.
I appreciate that as TV software is is quite good, it is just so annoying when they think they have made improvements that are worse (see my other recent posts).

Missing MSVCR80.dll after the latest update solved.

To all of you who lost iTune after the latest update, obviously there were some kind of bugs at their end. Very annoying. But here is the fix you can do it yourself. And don't worry your iTune is intact inluding your library.
First, you have to uninstall every Apple product via Control Panel, Program Uninstall. In that list you should have 4 Apple items; Apple Applicaiton Support, Apple Mobile Device Support, Apple Software Update, and iTunes. Uninstall them one by one.
Imoortant ot re-boot the system.
Then go to www.apple.com/itunes/, and look for the download button. That's it. As you go through the steps, be sure to instll as amdministrator.
You should get back your old iTunes with nothing missing.

Apple have a recommended order for uninstalling the components, and there are some other tips below...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Why can't I install the latest update?

Why can't I install the latest update? There is an update available. I'm asked to agree to the terms. I do and nothing happens.

There are two common reasons why an iPad can't be updated to the latest version of the operating system.
The most common reason is storage space. You can try to free up space of your iPad.
The second most common reason is the original iPad. For example, for iPhone, only iPhone 4s and the later can upgrade to iOS 8 and the higher.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

I did the latest update on my iphone and now I have a displayed white usb cord with an arrow pointing to ITunes with the circle with the musical note inside. I can't turn off the phone nor can I get beyond this display. Phone goes to voice mail..no ring

I installed the latest update to my iphone 4 and now all I have is a display of the white usb cord with arrow pointing to ITunes with a clue circle with the musical note in it displayed. I can't access my phone at all. I tried calling it and it says unavailable. I don't know how to restore it...it says it is in recovery mode but when I try to recover, it says no iphone found.
I have no idea how what to do to restore my phone. It's fully charged.
GRRRR

Put the device in DFU mode (Google it) and restore.

So based on the latest update #2 there's no workaround at all until the fix is pushed out?!?

Similar Messages

Maybe you are looking for