So I dropped my iphone 4 in the pool and i put it in rice. I took it out and all i got was a flashing apple logo screen. I now can get it to work but the screen still flickers constantly and shuts off randomly. How do u fix this?
mm
How long did you let it try in raw rice? How much chorine was in the pool?
If all else fails make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $149 USD.
Similar Messages
-
I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
Please help me..Accidental damage is not covered under Apple warranty. And it seems there is much accidental damage. Only a Genius Bar tech looking at it can tell how much it will cost to repair.
Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs. -
While attempting to update my ipad2 with the 8.1.3 update, screen froze towards the end of the update. Tried to turn it off by holding power butter to do a hard reset, but it won't turn off. How do I fix this?
Have you tried a soft-reset : Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should reappear and it will hopefully reboot.
If that doesn't work : If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
basically i forgot my password. it said "turn off find my ipod"
i removed my device from find my iphone but it still won't let me restore. How do I fix this?Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?
Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i -
I deleted all downloaded songs from my iPhone but under
Settings/About it still shows songs on my phone.
How do I fix this? I need to use that storage space for other things.First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
The Wi-Fi and Bluetooth on IPhone 4s will not toggle on or off. How do I fix this?
http://support.apple.com/kb/TS1559
-
I am trying to FaceTime from my iPhone5 as well as my iPad 2 and it keeps saying that it's connect but then a message saying FaceTime unavailable pops up. How do I fix this?
I am having the same issue... Please advise...
I avidly use facetime DAILY and for about 3-4 days now, whenever I try and send or receive facetime request it hangs up immediately without ever picking up. This is happening on all my devices and with everyone and doesn't matter what network/ wifi I'm connected to. This is definitely a network issue with individual profiles... -
I'm trying to priny from IPhoto. But it says that there is no theme installed. How do I fix this? THanks!
Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288�
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840�
> Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD -
I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off. How do I fix this?
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup -
So I charged my phone yesterday but it didn't seem to get charged because the battery percentage went lower instead of higher after I plugged out my phone. Then the battery percentage subsequently got lower even faster, jumping from 28% to 15% within ~a minute. It was very hot too, so maybe overheating was the problem. Then I tried charging my phone again after leaving it to cool but it won't charge and keeps flashing the Apple logo.
I've tried to no use:
1. pressing the Power button and Home button together for a long time
2. restoring my device (on iTunes it says that my phone's updated, but it still won't turn on)
Should I just send my phone to Apple for them to fix it or for a replacement?I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.
-
Everytime I open up Itunes I can listen to my music, but once I connect it to my IPod, it says "ITunes has stopped working" and then ITunes ***** down. How do I fix this problem?
Hi The Funkster,
The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
How to troubleshoot iTunes Match - Apple Support
http://support.apple.com/en-us/TS4054
I hope this information helps ....
- Judy -
File/Page Setup/Format & Options/Options/Print Background (colors & images): Check box set off.
This setting does not work as my screen background color still comes through on the print preview & the print page.
Is this because the newer Firefox versions have blocked my graphics driver version?See [https://bugzilla.mozilla.org/show_bug.cgi?id=683139 Bug 683139] – Using the 'High Contrast Black' 'Accessibility Option' in Win XP results in the screen colours being printed.
<i>(please do not comment in bug reports)</i> -
I updated my phone last night with the new iOS7.1 my phone worked fine before updating. Since updating, I have no sound from music or videos, but I do have sound when my phone rings. anyone know how to fix this? I have already done a restore that did nothing.
Clean iPhone charging port with toothbrush and small amount of isopropyl alcohol. If still problem the faulty part is charging port assembly with flex cable, lower mic, and connector of home button flex. Apple handles this problem with replacement iPhone 4S with Warranty or AppleCare coverage, if no coverage it is $199.
-
Hi there,
I just finished with my 30 day trial and then purchased the monthly student membership. My payment went through but I am still not able to open my apps for creative cloud. I really need this fixed as I am in the middle of doing a school project. If anyone can help that would be great!
Thank you,
KaylaHi Kayla, Kindly try to sign out and sigin back in to Creative Cloud. Please follow the below mentioned link for more info and troubleshooting further.
https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks,
Atul Saini
Maybe you are looking for
-
Hi all, We are looking to extracting CO-PA data into BW for use in reporting. I understand that the COPA utilises four tables namely: CE1XXXX-Actual line items CE2XXXX-Plan line items CE3XXXX-Summary table CE4XXXX-Segment table Some of our reports re
-
How do I add a new alpha channel in pse9?
where would I find the channel tab for pse3? I would like to use a black, white gradient and the lens blur to give a picture depth. I would like to make things in the background look farther away with a gradual blending effect of the lese blur. thank
-
If you need help quickly... Guideline for posting an effective question.
Whenever you have a question that you would like answered, do pose that question effectively. First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for an
-
Is the new "messages" app working for your networked home users?
I'm seeing a very odd issue where the new 10.8 "Messages" app not acting properly for users with a networked home directory. If logging in on the server, the users' Message app works just fine. When logging on from a client mounting their home dire
-
Still problem in TOMCAT(server.xml)
hiiiiiii I tried all suggestion......At end, now when I execute %startTomcat% from DOS prompt......DOS windows opens and closes...... Somebody told me that it was error in my server.xml file in conf...... PLZ tell me how alter this file or add new st