So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

Similar Messages

  • I have update ios5.1 now wifi does not working and wifi hotspot does not displaying in setting

    Dear All,
    I have update ios5.1 last week on my iphone4 16GB. Now Wifi is not working and Wifi Hotspot not displaying in setting menu.
    Pls help. What can i do now
    Senthil

    Can you tap the little "i" in the blue circle and "Forget this Network"

  • 10.7.4 update won't update properly, has caused Mail to not work.  How do I reinstall 10.7.3 Mail?

    Started the 10.7.4 install, and it halted.  Turned my Mac off, started it back up, and apparently the 10.7.4 update didn't install, but it has caused the Mail function to not work AT ALL - I get a long error report that is auto sent to Apple.
    I downloaded Lion from the Apple store, but have my Snow Leopard disk.  How do I go about re-installing Mail?
    Thanks for any help you can provide.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

    When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

    Some things to check:
    #'''Browsing history must be saved'''
    #*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
    #*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
    #'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
    #*Using Clear Recent History
    #**Firefox button: Firefox button > History >Clear Recent History
    #**Menu Bar: Tools > Clear Recent History
    #*When closing Firefox
    #**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
    #**Menu Bar: Tools > Options > Privacy (checked) > Settings
    #**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
    #'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
    #*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
    #'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

  • Firefox updated automatically yesterday and since then, Mozilla Crash Reporter appears every time I try to open Firefox.

    I've uninstalled and re installed, but nothing works. Plus, I'm not very tech savvy.

    Crash ID: bp-04846a37-7a05-4d50-b22a-fd4b12130112

  • I have updated firefox 2 times since the last upgrade, but when I open it I still get the message "You are not on the latest version of Firefox Upgrade Now". I have downloaded and installed it so I'm stumped. Any suggestions?

    I am running Windows XP

    This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
    Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

  • I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

    I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

    I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

  • When downloading 10.5.2 version of itunes to Microsoft Vista 32 bit it gets to 68% downloaded and hangs then eventuall times out.  No error msg given.  What is it waiting for?

    When downloading 10.5.2 version of itunes to Microsoft Vista 32 bit it gets to 68% downloaded and hangs then eventuall times out.  No error msg given.  What is it waiting for?

    Finally got it working, I had to delete two solitary files in an iTunes folder.
    C:\ProgramData\Apple Computer\iTunes\SC Info
    Delete the only two files that are in this folder. Please note that it is a hidden folder.
    After they have been deleted, iTunes should work (it did for me)
    This may not work if your iTunes.exe process (viewable with task manager) turns off after the license agreement. I solved that problem by updating quicktime.
    iTunes 10.5.2 doesn't update quicktime like all the previous installers did.

  • After updating to V 15.0 I have the issue that suddenly many but not all of the functions do not work anymore. Menues and download links do not work.

    I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • I have updates for iMovie and iPhoto but when i try to update them i'm told To update this application, sign in to the account you used to purchase it." even though i bought it and it is on my iMac!

    I have updates for iMovie and iPhoto but when I try to update them through App Store I'm told that "To update this application, sign in to the account you used to purchase it." even though I bought it and it is on my iMac! Any suggestions on what I need to do?

    Hi...
    Delete both apps using this utility >  Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
    That will delete the apps and all associated files.
    Then re download the apps. That will download the most recent version updates included.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    Make sure and use the same Apple ID used for the original purchase.

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I have just purchased the new Canon 7D II.  I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered.  I have updated both CS6 and LR so that is not the problem.

    I have just purchased the new Canon 7D II.  I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered.  I have updated both CS6 and LR so that is not the problem.  Not sure what to do next.

    It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.

  • Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death.  I always need to perform a Force Quit.  I have updated my software, but that did not help.

    Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death.  I always need to perform a Force Quit.  I have updated my software, but that did not help.

    tullch24
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

  • Since I have updated IOS 6 my mail does not work, it keeps telling me my user name and password is incorrect.

    Since I have updated my iPad to iOS 6 my mail will not work, so I deleted my account and added a
    New, now it says my username and password is incorrect.  But my username and password are correct.
    Does anybody have a solution?

    May be something here.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

Maybe you are looking for