So, my ipod touch 4th generation has stopped working. every time i plug it into a wall or an outlet, it will regester that it has been plugged in, but it will not charge, and trurn on. does anyone have any suggestions? thank you.
my ipod touch has stopped working. I will plug it into a wall, or computer, and it will register that it is plugged in, but it will not charge and turn on. does anyone have any advice? thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
What's happened to the calendar in IOS 7.0? I would like to be able to see the whole day at a glance not just a few hours. Any suggestions?
I know what it looks like and what it does. I need to be able to see the whole day! A few hours is not helpful for knowing whats ahead. I don't want to scroll I just want to be able to look at a glance. Does anyone have any helpful suggestions.
-
Could you just look at this vi and tell me if i am doing anything wrong? I get errors that are different each time I change something. here are the inputs I am using
Output Side:
amplitude = 1
freuency = 50kHz
Sampling Frequency = 1MHz
3 of Samples = 200
Input Side:
Input Buffer 4000
trigger type = analog
pretrigger = 5
edge or slope = rising
scan rate = 500kHz
# of scans = 2000
Conditional Retrieval
mode = on
slope = rising
skip count = 0
level = .1
offset = 0
hysteresis = 0
So what we want to do is capture the ten
cycles of the 50k output pulse on the input and need to store that so we can plot it later, do you have any suggestions. we are using the PCI-MIO- 16E board.
Thanks,
Jarrod
Attachments:
InputOutput2.vi 88 KB1) Toss the sequence frames (no flames please).
2) Set you read and have it ready to trigger before oing the output.
3) After the output, go back and read the data that is waiting for you.
4) If you have errors tell us what they are and under what conditions they occured.
End of Ben's suggestions for now.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
My son's ipad mini has become not usable because it asks for constantly asks for iCloud password. It says that it is not the correct password and the screen reappears. I know the password is correct because I can login to the website via another PC.
Part of the issue is that it appears not be connected to the network. It appears to be trying to then gets interuptted by the iCloud password request.
I tried to restore from iTunes when connected to PC, however, it says it cannot do this because Find My Phone has been activated on the ipad. To deactiviate I need to turn it off on the ipad which required my iCloud password (seems I am in a catch 22).
Any suggestions on how to proceed?
Thanks.Hopefully this will me get you back up.
http://support.apple.com/kb/HT1212 -
Hi - I have just bought my first IPAD [3 rd gen, no wifi] and one of the things I want it to do is to accept transfered word files
preferably as folders from my MAC - I just bought Keynote but it doesn't seem to work. My files are all doc and docx so I think
perhaps looking into it more I should have bought Pages instead,, but I don't want to spend more money on another app if
possible. Does anyone have any suggestions?You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
I am a guy and i am looking at buying an ipod touch 5, i do not know what color i should get, does anyone have any suggestions on what ipod touch colors are best for guys?
The Product Red model
-
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
Hi there. I just bought a new iMac. Used to have a pc. Plugged my nano into iMac and it transferred my purchases fine. Bought a new album on i tunes and it will not download to my nano. Does anyone have any suggestions? Much appreciated. Thanks.
You may not have the iPod's Music tab set up in iTunes, which is how you tell iTunes how to automatically sync your iPod.
Select the iPod in iTunes. There is a row of "tabs" (starting with Summary). Click on Music there.
To use automatic syncing, the checkbox for Sync Music is checked. Below that, you can choose to sync Entire music library, if it fits. Otherwise, you can choose to sync Select playlists, artists, albums, and genres.
With the latter choice, you can create a selection of songs to sync to the iPod by selecting (checkmarking) playlists, artists, albums, and/or genres on the Music tab. For example, you can make a playlist in iTunes with all the songs you want on the iPod. That new album needs to be on that playlist, if you want those songs synced to the iPod. On the Music tab, checkmark that playlist.
When you Apply the change, your selection of songs sync to the iPod (replacing its existing content). Going forward, any changes in the iTunes Music library that are related to your selection of songs on the Music tab sync automatically to the iPod when you connect it, or when you click Sync.
Therefore, if you create a playlist with songs you want on the iPod, and select it on the iPod's Music tab, you can simply update that playlist in iTunes (add and remove songs), and those changes sync to the iPod automatically at the next opportunity. -
Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?
I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
Try the Zimbra support forums. I found this excerpt from a relevant post:
http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
in which the following ports were suggested
ports 25, 465, and/or 487 to send mail.
port 143/993 to retrieve mail over IMAP -
I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?
First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz -
I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not very good at computers and don't want to download the wrong thing.
I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not very good at computers and don't want to download the wrong thing.
-
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
My IPad has disconnected from my home WiFi and will not accept my password. Does anyone have any ideas on how to fix this?
I would
1. turn off the router for 30sec and connect it to see if it fix it
2. restart the ipad by holding down the on and home button and use the slider
3. update the firmware of the router -
tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?
Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason -
I can not get NETFLIX to work, does anyone have any suggestions.
can not get NETFLIX to work, does anyone have any suggestions...
I have downloaded and installed Silverlight..
and uninstalled it and reinstalled it...
I have called Microsoft and also called Netflix support..
who advised me to call Microsoft.
Microsoft advised to to call apple
seriously?
HELP!Have you tried a different web browser like Mozilla FireFox?
Have you tried just restating your Mac?
Maybe you are looking for
-
When I open firefox two firefox open and I am unable to download new features because of this
I click on my firefox icon and when I hit the update request (to get new firefox update) it will not download because it says I have two firefox pages open. This happens for other updates as well. When I hit the red button to close the firefox connec
-
Dialog Programming......its urgent
Hi Guys I have a requirement like this i have to create a z* table similar to mara and i will take 5 fields of mara. Suppose there is two sreens designed using SE51 1- one contain three buttons as CREATE,DISPLAY,CHANGE 2- second contain 5 text fiel
-
How to copy a webi from one system to another system? l
like from production system to another develop system thanks
-
How to TOTALLY remove certain files from a computer?
I want to remove files that I have created on my computer. These files contain sensitive private data. Thanks
-
My iPhone is continually turning itself on and off, how do I solve?
It's turned itself off and then when I tried to turn it back on it continually turns itself n and off! How do I solve it?