So when i install the 7.2 crossgrade
my 7.0 projects will open just fine right?
I've only had an intel mac I installed 7.0 on this
mac. I got the crossgrade in the mail today, but I'm
in the middle of working on a project for someone,
will it be ok?
Don't assume it will be OK. Really, play it safe. Don't let your eagerness to play with a new toy potentially get in the way of your production. Finish out your tracks, and only after you're done should you update.
Same rule applies for software updates. Do not update unless you have a d@mn good reason to do so (and "cuz it's new!" doesn't count as a d@mn fine reason).
The voice of experience... has spoken!
-=iS=-
Similar Messages
-
have the iphone 4s, when i installed the ios7 my wifi and BT i nost working, the wifi is in gray and i could no switch on. any solution?
http://support.apple.com/kb/TS1559
-
Central instance can not startup when i install the SAP /DB2 9 env
Hi,
could anybody help me? I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been OK, Unfortunately , an
error occurs when I installed the CI.
the error message is that "ABAP Database db must be started on remote server " i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed" the detail informatioin ,please check the the following trans.log. but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password.
first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens. In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before. i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
First let me describe our cluster enviroment
For CI, and DI are not a Single point of failure , so the DI and CI
are out of cluster. The cluster enviroment just includes the
SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
1. Host name
sapaix01 : DB instance and DI (visual hostname dbae1)
sapaix02: SCS,ASCS, CI (visual hostname scsae1)
2. file systems (sapaix01 DB instance )
Sapaix01
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 6291456 4792544 24% 2808 1% /
/dev/hd2 13107200 6175040 53% 73295 10% /usr
/dev/hd9var 13107200 12816904 3% 1336 1% /var
/dev/hd3 61603840 35610304 43% 3844 1% /tmp
/dev/fwdump 786432 785656 1% 4 1%
/var/adm/ras/platform
/dev/hd1 1048576 1016152 4% 213 1% /home
/proc - - - - - /proc
/dev/hd10opt 4194304 2512624 41% 6241 3% /opt
/dev/lvusrsapae1d10 41943040 41935984 1% 4 1%
/usr/sap/AE1/D10 (Local file system)
/dev/lvdb2ae1 20971520 20927640 1% 38 1% /db2/AE1
/dev/lvdb2logs 20971520 18346424 13% 25 1%
/db2/AE1/log_dir
/dev/lvdb2archive 41943040 41935984 1% 4 1%
/db2/AE1/log_archive
/dev/lvae1sapdata1 104857600 18817168 83% 47 1%
/db2/AE1/sapdata1
/dev/lvae1sapdata2 104857600 18817400 83% 48 1%
/db2/AE1/sapdata2
/dev/lvae1sapdata3 104857600 18817184 83% 48 1%
/db2/AE1/sapdata3
/dev/lvae1sapdata4 104857600 18817168 83% 48 1%
/db2/AE1/sapdata4
/dev/lvdb2db2ae1 20971520 19874760 6% 3931 1% /db2/db2ae1
/dev/lvae1saptemp 20971520 20967584 1% 12 1%
/db2/AE1/saptemp1
/dev/lvdb2db2as 10485760 10483504 1% 4 1% /db2/db2as
/dev/lvae1db2dump 10485760 10470600 1% 8 1%
/db2/AE1/db2dump
scsae1:/export/usr/sap/trans 20971520 20967592 1% 16 1%
/usr/sap/trans
scsae1:/export/sapmnt/AE1 12582912 9886168 22% 1529 1%
/sapmnt/AE1
10.241.13.54:/software2 1755152384 1154051696 35% 62702 1%
/software2
For the database version is 9.1 , so I installed the db2 software in
/db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1 (for DI)
on sapaix01, db2 client software in /opt/IBM/db2/V9.1 (I installed the
db software with virtual hostname dbae1 not sapaix01 )
sapaix02
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 6291456 4915592 22% 2790 1% /
/dev/hd2 13107200 6177120 53% 73643 10% /usr
/dev/hd9var 13107200 12857456 2% 1311 1% /var
/dev/hd3 21495808 16955192 22% 3283 1% /tmp
/dev/fwdump 786432 785656 1% 4 1%
/var/adm/ras/platform
/dev/hd1 1048576 1046848 1% 105 1% /home
/proc - - - - - /proc
/dev/hd10opt 4194304 2197776 48% 9002 4% /opt
/dev/lvusrsapae1 20971520 20966872 1% 47 1% /usr/sap/AE1
/dev/lvae1ascs01 10485760 10243360 3% 86 1%
/usr/sap/AE1/ASCS01
/dev/lvae1scs00 20971520 20706584 2% 97 1%
/usr/sap/AE1/SCS00
/dev/lvsapmntae1 12582912 9886168 22% 1529 1%
/export/sapmnt/AE1
/dev/lvusrsaptrans 20971520 20967592 1% 16 1%
/export/usr/sap/trans
scsae1:/export/sapmnt/AE1 12582912 9886168 22% 1529 1%
/sapmnt/AE1
scsae1:/export/usr/sap/trans 20971520 20967592 1% 16 1%
/usr/sap/trans
10.241.13.54:/software2 1755152384 1154051696 35% 62702 1%
/software2
3. hosts file the file is the same on sapaix01 and sapaix02
10.241.13.121 dbae1
10.241.13.125 scsae1
10.10.11.1 sapaix01_boot1
10.10.11.2 sapaix02_boot1
10.10.10.1 sapaix01_boot2
10.10.10.2 sapaix02_boot2
10.241.13.71 sapaix01 sapaix01_per
10.241.13.72 sapaix02 sapaix02_per
4. the installation guide and error message please check the attachment
<<installation_and errorlog.zip>>
5. I run db2ilist command nothing disppear
I have another questions
* whether does DB2 9.1 support installation on the diffirence
directory (default is /opt/IBM/db2/V9.1 my installation is
/db2/db2ae1/V9)?
* Whether does DB2 9 installation has some relationship with
hostname ?
* Why db2ilist command result is nothing after I finished the
DB instance installation ?
trans.log
"trans.log" 143 lines, 14041 characters
4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.03.2008 - 20:25:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Mar 10 20:25:40 2008 70 0.000070
4 ETW000 [dev trc ,00000] db_con_init called 25 0.000095
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 42 0.000137
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
4 ETW000 60 0.000197
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
4 ETW000 1018 0.001215
4 ETW000 [dev trc ,00000] Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
4 ETW000 39 0.001254
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 43 0.001297
4 ETW000 [dev trc ,00000] Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
4 ETW000 282 0.001579
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 42 0.001621
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 43 0.001664
4 ETW000 [dev trc ,00000] New connection 0 created 29 0.001693
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.001743
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 41 0.001784
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 40 0.001824
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 47 0.001871
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
cessfully loaded
4 ETW000 9175 0.011046
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 42 0.011088
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 24 0.011112
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 42 0.011154
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 25 0.011179
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 40 0.011219
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 39 0.011258
4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000 51 0.011309
4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000 40 0.011349
4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000 40 0.011389
4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000 40 0.011429
4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000 39 0.011468
4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 41 0.011509
4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 41 0.011550
4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000 40 0.011590
4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 886231)
4 ETW000 40 0.011630
4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000 40 0.011670
4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000 40 0.011710
4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000 39 0.011749
4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000 41 0.011790
4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000 41 0.011831
4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000 41 0.011872
4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000 41 0.011913
4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000 41 0.011954
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000 39 0.011993
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000 40 0.012033
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000 40 0.012073
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 41 0.012114
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000 47 0.012161
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000 39 0.012200
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000 40 0.012240
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000 39 0.012279
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000 41 0.012320
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000 41 0.012361
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000 39 0.012400
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 41 0.012441
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 41 0.012482
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 41 0.012523
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 41 0.012564
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 41 0.012605
4 ETW000 [dev trc ,00000] (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
4 ETW000 40 0.012645
4 ETW000 [dev trc ,00000] (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
4 ETW000 40 0.012685
4 ETW000 [dev trc ,00000] (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
4 ETW000 41 0.012726
4 ETW000 [dev trc ,00000] (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
4 ETW000 42 0.012768
4 ETW000 [dev trc ,00000] (0.128) DB6: db6_free on invalid memory area (note 1092030)
4 ETW000 40 0.012808
4 ETW000 [dev trc ,00000] (0.133) DB6: statement cache enhancements (note 1101031)
4 ETW000 40 0.012848
4 ETW000 [dev trc ,00000] Supported features: 24 0.012872
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 24 0.012896
4 ETW000 [dev trc ,00000] ..done 126 0.013022
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 25 0.013047
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000 67222 0.080269
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed
with reason "24" ("USERNAME
4 ETW000 48 0.080317
4 ETW000 [dev trc ,00000] &+ AND/OR PASSWORD INVALID"). SQLSTATE=08001
4 ETW000 45 0.080362
4 ETW000 [dev trc ,00000] &+
4 ETW000 45 0.080407
4 ETW000 [dev trc ,00000] &+
4 ETW000 46 0.080453
4 ETW000 [dev trc ,00000] &+
4 ETW000 45 0.080498
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END) 26 0.080524
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
4 ETW000 71 0.080595
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'AE1'"Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens -
When I installed the recent updates for Microsoft Office 2011 for Mac, my iCal calendar was wiped out, as was the calendar on my iPhone. I'd rather use iCal than Office and was attempting to phase Office out altogether. Now, all of my information is on the Office calendar but not iCal. The iCloud version of my iCal calendar is not up to date. In any event, I couldn't figure out how to send that info to the iCal on my mac or my phone. How can I sync my Office calendar info to iCal? If that's not possible, how can I get my Office calendar to sync with my iPhone? All of my sync services are set up in iTunes and on my phone. This happened to me once before and I spent hours on the phone with Apple and on the web trying to work it out. I NEED MY CALENDAR!!!! PLEASE HELP!!!!!
As that's not an Apple product, you may get more help by using Microsoft's Office for Mac forums:
Office for Mac forums
The other concern I have is that Office 2011 requires an Intel-based Mac and you posted in the older iMac (pre-Intel or "PPC") forums. If you have an Intel-based iMac (Apple menu > About this Mac..." will say "Intel" if you do) then I think you'll get faster and more accurate ansers to other questiosn in the Apple forums for newer iMacs here:
iMac (Intel) -
I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I imputed it. Then it asked for my previous serial number from my original lightroom 3 purchase. Since I upgraded to lightroom 4 I don't have the serial number for the version 3. How do I get the serial number from my 3 version so I can activate my version 4 program
If you have Lightroom 3 still installed, you can get it from there.
If you don't and you have your box/disk, it should be on there.
IF you don't have either of those,and you registered your software, you can log into your Adobe account and retrieve it there. -
I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-SteveBooting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?
Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display -
How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!
Hi mujabee1111,
Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
Download CS5 products
Regards,
Sheena -
I bought a new ipad air but when i install the apps , all of them are gone , but i app store still are and says you can open it. But it can not open.
The apps available to you are dependent on your location. If you are not in the USA, then you cannot get the USA app store. Whilst you may think that is unfair, it has been a part of the stardard terms and conditions you agreed to when you setup the iOS device in question originally, as well as every time you click agree to the terms and conditions.
This is done because of two things, firstly there are many legal and semi-legal reasons that an iOS app store download is available in one territory and not another, in addition to this, it also allows apple to provide language specific content, as well as team up with companies and organisations within individual organisations in order to provide you with exclusive offers, content, and information, which it would not otherwise be able to do.
Rules for the iOS app store are also applied in varing forms for the music store, the books store, and the iTunes U content library.
I can very much understand your fustraition, as someone who spent a considerable portion of his life, especially during the years he grew up, living in California, USA, but now living in London, UK, I too find it very fustraiting that you cannot always get the same content from one country to another, especially when most marketing for iOS apps originates in the USA these days.
I hope this helps your query and helps to ease your fustraition. If you would like apple to be aware of your fustraition, rather than putting it onto a pubilc form which is on monitored in a very limited capacity, then you can fill in the form at http://www.apple.com/feedback where you can give your complaint straight to apple. -
When I installed the PS CC app to my system
When I installed the PS CC app to my system, it installed two PS files. One filed calles "Adobe Photoshop CC" and the other "Adobe Photoshop CC (64bit)" Do I need both of them ? Which one do I put my plugins into ?
You should use the installer from the plug-in manufacturer. It will put them in the right place:
http://blogs.adobe.com/crawlspace/2013/06/updatingupgrading-to-photoshop-cc-faq.html#plugi ns
Dragging plug-ins around will be a trail of tears with plug-in DRM. -
I downloaded the mountain lion from the app store and it downloaded. When i installed the mountain lion it said that the hd disk is broken and cannot be repaired, and the other disk doesnt have enough space! HELP and i cannot return to my desktop with the old sofware so i cant use my computer normaly
This error means that your hard drive is badly corrupt and cannot be repaired by Disk Utility. Since you say you don't have backups, this is very bad news. You may already have lost data irrevocably.
First order of business needs to be backing up whatever you can, but this may be difficult to do if the machine won't start up any more. See step 1 of the following post:
https://discussions.apple.com/message/21614450#21614450
Once you have backed up your data, you can address the other issues. -
Problems when I Install the software
When I install the software show an error . error says:
HKEYLOCALMACHINE/software/QuickTimePlayerLib.quickTimePlayerApp Verify that you have sufficient acces to that Key, or contact your support personnel......
Please .....If someone can help me send me an email .. my email is .. [email protected]?????Say step by step ??omg i have the same problem! someone please help us! por favor...=]
-
when I install the program, all go good but when i open the program, it say: iTunes was not installed correctly, Please reinstall Itunes Error 7 (windows 193), After i do this but the same
Howdy Allux345.
After multiple installations of iTunes it can be frustrating when the issue isnt resolved. I was able to locate the following knowledge base article that specifically addresses the "Error 7" you are recieving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
The Resolution section has different steps depending on what version of the Windows Operating System you're using. Since it can be a bad installation of these Windows files, pay close attention to the instructions on repairing if the file already exhists.
Thanks for reaching out to Apple Support Communities with your question.
Cheers,
Pedro D. -
When im installing the iLife bundle package, it says an unknown error has occurred. What do i do?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Maybe you are looking for
-
Iphone ical events wont show up in ical
I have had an iphone for a few months now and recently got a imac G5 with OS X 10.4.11. I am trying to sync my iphone calendar with my imac ical software, but none of my events will show up on the imac. All of my contacts have synced, but not the cal
-
I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?
-
How to Code SWFObject with Alternate Content
I've read umpteen tutorials and articles on embedding Flash with alternate content, and they're all too different, confusing, and unsuccessful. All I want to do is insert a JPEG to replace my Flash movie on non-Flash browsers but have no idea how or
-
How can I resolve the major problems with Lightroom 5 on iMac 5k?
There are many many bugs that have come up in Lightroom 5 on my new iMac 5k (OSX10.10.1 Yosemite) that are seriously challenging my productivity! A short list of the problems include: Huge slow-downs when navigating in the develop module, very slow a
-
Stolen MacBook Pro - Serial #W884630M1GK
My late 2008, 15" MacBook Pro (in a red sleeve) was stolen from my apartment on 6/26/09. If you see Serial# W884630** in any auctions (eBay; etc.), please post! Thank you. <Edited by Host>