SOA 11g DBAdapter Polling using a Sequencing Table with a DATE Field

Hi.
I have implemented a polling solution using a sequencing table that references a DATE column. For the most part the poll works correctly, but on occasion, I am not seeing a BPEL process instantiation for various records that get created in my source table.I have also noticed that in this particular case, the DATE field content on one or more source records is exactly the same --> "YYYYMMDDhhmmss".
I just want to confirm here, that the polling adapter should be able to pick up multiple records from the source table, even though the date field is exactly the same. As well, how should I go about trying to debug this issue, if point #1 is handled by the system. Is there is a specific log or trace file that I can look at. Also, could I be facing a timing issue ?
Can someone please comment on this.
Thanks.

In my table, I don't see a primary key, but only a unique index. I would assume then, that this would be analogous to the primary key capture; noticed that currently this code was only using one column out of two, from the unique index itself.
Also, is the date content issue that I mentioned above a moot point then, based upon not having the correct primary key/unique key data pointers established ?
Thanks.

Similar Messages

Query on a table with indexed date field

I have a table with a date column which is indexed. If I run a query like "select column1 where date_field='20-JAN-04' for example it is fast and uses index.
If I run select column1 where date < '20-JAN-04' it is slow and doesnt use the index. I logged a TAR and Oracle told me that this is to be expected as not using the index in this case is the most effiecient way of doing the query.
Now my concept of an index is like the index of Yellow Pages(telephone directory) for example. In this example if I look for a name that is say "Halfords" or below, I can see all entries for Halfords and all the way to ZZZ in one block.
I just cant see , in a common sense way why Oracle wont use the index in this type of query.
George

Using the concept of a telephone directory is wrong. In a telephone directory you have all information order by the name. However in your table (if it is not an IOT) you don't have all information/rows ordered by your date_field. Rather think at the document "Oracle9i Database Concepts" and it's index.
Let's say you want to find all indexed words larger then "ISO SQL standard" (ok that doesn't make sense but it is just an example). So would it be faster to read the whole document or to lookup each word in the index and then read the entire page (Oracle block) to find the word.
It's not allways easy to know in advance if the query will be faster over the index or a full table scan. what you need to do is to well analyze (dbms_stats) the table and it's index, in most cases Oracle chooses the right way. You may also use the hint /*+ index(table_name index_name) */ and will see if it would be faster over the index or not.
A good document about that subject is:
http://www.ioug.org/tech/IOUGinDefense.pdf
HTH
Maurice

Use of internal table with hearerline in ABAP OO

Hi,
I have a very basic question regarding the use of Internal table with headerline in ABAP OO.
I consider the concept of Internal table with header as one of the most features of ABAP, which is not there in any of the other porgramming languages.
I accept that OO's concept is one of the most powerful and a very good concept. We should also implement OO's concept in ABAP.
But my concern is why in the process of moving to OO's the concept of Internal table with headerline is no more used.
Can any one tell me the main reason for this. Is there any technical reason for this. By this i mean anything to do with memory or effeciency.
Thanx,
Srinivas

Hi Srinivas,
here is something more which i found about the same
follow this link
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
and search for header line.
it says:
Tables with header lines not allowed
Only tables without header lines can be declared in ABAP Objects.
Error message in ABAP Objects if the following syntax is used:
DATA itab TYPE LIKE TABLE OF ... WITH HEADER LINE.
Correct syntax:
DATA: itab TYPE LIKE TABLE OF ... ,
wa LIKE LINE OF itab.
Reason:
It depends on the statement whether the body or header line of a table is accessed. The table name should identify the table uniquely. Programs are easier to read. Tables with header lines do not improve performance.
i hope this will help you.
regards,
Kinshuk
PS mark helpful answers

BADI cant use an internal table with header line

hi,
In BADI, we cant use an internal table with header line, and I am calling a function module which requires internal table as import parameter, now, the table I am passing is without a header line, So how to solve this problem ?

You can use a type and then create an internal table of that type.
types :
begin of t_<example>
*field list
end of t_<example>
data :
gt_<table> type standard table of t_<example>
pass this to the FM

What are the advantages of using an internal table with workarea

Hi,
can anyone tell me
What are the advantages of using an internal table with workarea
over an internal table with header line?
thnks in adv
regards
nagi

HI,
Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
<b>Difference between Work Area and Header Line</b>
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table
1) The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line
2)work area / field string and internal table
which one is prefarable for good performance any why ?
-The header line is a field string with the same structure as a row of the body, but it can only hold a single row , whereas internal table can have more than one record.
In short u can define a workarea of an internal table which means that area must have the same structure as that of internal table and can have one record only.
Example code:
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Regards,
Padmam.

How To Create Table with Static Data

JDEV 10.1.3
ADF BC
ADF Faces
I am trying to make some simple screen/screenflow diagrams to help flesh out some requirements. To do that, I need to make a table with static data that is not hooked up to a data source (because the data model has not yet been clearly defined, and I'm using the diagrams to help iterate the requirements).
Is it possible to create a table that shows static data (i.e. a set of rows that does not come from a model data source, but rather is hardcoded.)
If not, how does one create mock ups without actually implementing the data model?
Thank you.

Deepak, what specifically in those 2 links from Amis are useful? Those 2 posts are about bind variables, not static list of values?
In response to the original poster, I'll attempt to help a little more.
In the 11g release you can create VOs based on a static list of values. However in your case on 10.1.3, the best method I've found is to create a VO based on a SELECT <columns> FROM DUAL statement. The columns then include your dummy data. If you need more than one row, simply UNION ALL a number of SELECT statements together.
What I haven't checked, is when you eventually transform the VO based on the SELECT DUAL statement into a VO based on an EO drawing real data from the database, is it an easy process? I recommend you try this out before committing to the approach above. Let us know how you go.
Regards,
CM.

How to fill internal table with no data in debugging mode

Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
Balaji

Hi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren

MaxDB: Table with many LONG fields does not allow an INSERT: ...?

Hi,
I have a table with many LONG fields (28). So far, everythings works fine.
However, if I add another LONG field I cannot insert a dataset anymore
(29 LONG fields).
Does there exist a MaxDB parameter or anything else I can change to make inserts possible again?
Thanks in advance
Michael
appendix:
- Create and Insert command and error message
- MaxDB version and its parameters
Create and Insert command and error message
CREATE TABLE "DBA"."AZ_Z_TEST02"
     "ZTB_ID"               Integer    NOT NULL,
     "ZTB_NAMEOFREPORT"           Char (400) ASCII DEFAULT '',
     "ZTB_LONG_COMMENT"                LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_00"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_01"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_02"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_03"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_04"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_05"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_06"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_07"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_08"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_09"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_10"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_11"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_12"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_13"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_14"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_15"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_16"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_17"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_18"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_19"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_20"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_21"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_22"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_23"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_24"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_25"         LONG ASCII DEFAULT '',
     "ZTB_LONG_TEXTBLOCK_26"         LONG ASCII DEFAULT '',
     PRIMARY KEY ("ZTB_ID")
The insert command
INSERT INTO AZ_Z_TEST02 SET ztb_id = 87
works fine. If I add the LONG field
"ZTB_LONG_TEXTBLOCK_27"         LONG ASCII DEFAULT '',
the following error occurs:
    Auto Commit: On, SQL Mode: Internal, Isolation Level: Committed
    General error;-7032 POS(1) SQL statement not allowed for column of data type LONG
    INSERT INTO AZ_Z_TEST02 SET ztb_id = 88
MaxDB version and its parameters
All db params given by
dbmcli -d myDB -u dbm,dbm param_directgetall > maxdb_params.txt
are
KERNELVERSION                         KERNEL    7.5.0    BUILD 026-123-094-430
INSTANCE_TYPE                         OLTP
MCOD                                  NO
RESTART_SHUTDOWN                      MANUAL
SERVERDBFOR_SAP                     YES
_UNICODE                              NO
DEFAULT_CODE                          ASCII
DATE_TIME_FORMAT                      INTERNAL
CONTROLUSERID                         DBM
CONTROLPASSWORD
MAXLOGVOLUMES                         10
MAXDATAVOLUMES                        11
LOG_VOLUME_NAME_001                   LOG_001
LOG_VOLUME_TYPE_001                   F
LOG_VOLUME_SIZE_001                   64000
DATA_VOLUME_NAME_0001                 DAT_0001
DATA_VOLUME_TYPE_0001                 F
DATA_VOLUME_SIZE_0001                 64000
DATA_VOLUME_MODE_0001                 NORMAL
DATA_VOLUME_GROUPS                    1
LOG_BACKUP_TO_PIPE                    NO
MAXBACKUPDEVS                         2
BACKUP_BLOCK_CNT                      8
LOG_MIRRORED                          NO
MAXVOLUMES                            22
MULTIO_BLOCK_CNT                    4
DELAYLOGWRITER                      0
LOG_IO_QUEUE                          50
RESTARTTIME                         600
MAXCPU                                1
MAXUSERTASKS                          50
TRANSRGNS                           8
TABRGNS                             8
OMSREGIONS                          0
OMSRGNS                             25
OMS_HEAP_LIMIT                        0
OMS_HEAP_COUNT                        1
OMS_HEAP_BLOCKSIZE                    10000
OMS_HEAP_THRESHOLD                    100
OMS_VERS_THRESHOLD                    2097152
HEAP_CHECK_LEVEL                      0
ROWRGNS                             8
MINSERVER_DESC                      16
MAXSERVERTASKS                        20
_MAXTRANS                             288
MAXLOCKS                              2880
LOCKSUPPLY_BLOCK                    100
DEADLOCK_DETECTION                    4
SESSION_TIMEOUT                       900
OMS_STREAM_TIMEOUT                    30
REQUEST_TIMEOUT                       5000
USEASYNC_IO                         YES
IOPROCSPER_DEV                      1
IOPROCSFOR_PRIO                     1
USEIOPROCS_ONLY                     NO
IOPROCSSWITCH                       2
LRU_FOR_SCAN                          NO
PAGESIZE                            8192
PACKETSIZE                          36864
MINREPLYSIZE                        4096
MBLOCKDATA_SIZE                     32768
MBLOCKQUAL_SIZE                     16384
MBLOCKSTACK_SIZE                    16384
MBLOCKSTRAT_SIZE                    8192
WORKSTACKSIZE                       16384
WORKDATASIZE                        8192
CATCACHE_MINSIZE                    262144
CAT_CACHE_SUPPLY                      1632
INIT_ALLOCATORSIZE                    229376
ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
TASKCLUSTER01                       tw;al;ut;2000sv,100bup;10ev,10gc;
TASKCLUSTER02                       ti,100dw;30000us;
TASKCLUSTER03                       compress
MPRGN_QUEUE                         YES
MPRGN_DIRTY_READ                    NO
MPRGN_BUSY_WAIT                     NO
MPDISP_LOOPS                        1
MPDISP_PRIO                         NO
XP_MP_RGN_LOOP                        0
MP_RGN_LOOP                           0
MPRGN_PRIO                          NO
MAXRGN_REQUEST                        300
PRIOBASE_U2U                        100
PRIOBASE_IOC                        80
PRIOBASE_RAV                        80
PRIOBASE_REX                        40
PRIOBASE_COM                        10
PRIOFACTOR                          80
DELAYCOMMIT                         NO
SVP1_CONV_FLUSH                     NO
MAXGARBAGECOLL                      0
MAXTASKSTACK                        1024
MAX_SERVERTASK_STACK                  100
MAX_SPECIALTASK_STACK                 100
DWIO_AREA_SIZE                      50
DWIO_AREA_FLUSH                     50
FBM_VOLUME_COMPRESSION                50
FBM_VOLUME_BALANCE                    10
FBMLOW_IO_RATE                      10
CACHE_SIZE                            10000
DWLRU_TAIL_FLUSH                    25
XP_DATA_CACHE_RGNS                    0
DATACACHE_RGNS                      8
XP_CONVERTER_REGIONS                  0
CONVERTER_REGIONS                     8
XP_MAXPAGER                           0
MAXPAGER                              11
SEQUENCE_CACHE                        1
IDXFILELIST_SIZE                    2048
SERVERDESC_CACHE                    73
SERVERCMD_CACHE                     21
VOLUMENO_BIT_COUNT                    8
OPTIM_MAX_MERGE                       500
OPTIM_INV_ONLY                        YES
OPTIM_CACHE                           NO
OPTIM_JOIN_FETCH                      0
JOIN_SEARCH_LEVEL                     0
JOIN_MAXTAB_LEVEL4                    16
JOIN_MAXTAB_LEVEL9                    5
READAHEADBLOBS                      25
RUNDIRECTORY                          E:\_mp\u_v_dbs\EVERW_C5
_KERNELDIAGFILE                       knldiag
KERNELDIAGSIZE                        800
_EVENTFILE                            knldiag.evt
_EVENTSIZE                            0
_MAXEVENTTASKS                        1
_MAXEVENTS                            100
_KERNELTRACEFILE                      knltrace
TRACE_PAGES_TI                        2
TRACE_PAGES_GC                        0
TRACE_PAGES_LW                        5
TRACE_PAGES_PG                        3
TRACE_PAGES_US                        10
TRACE_PAGES_UT                        5
TRACE_PAGES_SV                        5
TRACE_PAGES_EV                        2
TRACE_PAGES_BUP                       0
KERNELTRACESIZE                       648
EXTERNAL_DUMP_REQUEST                 NO
AKDUMP_ALLOWED                      YES
_KERNELDUMPFILE                       knldump
_RTEDUMPFILE                          rtedump
UTILITYPROTFILE                     dbm.utl
UTILITY_PROTSIZE                      100
BACKUPHISTFILE                      dbm.knl
BACKUPMED_DEF                       dbm.mdf
MAXMESSAGE_FILES                    0
EVENTALIVE_CYCLE                    0
_SHAREDDYNDATA                        10280
_SHAREDDYNPOOL                        3607
USE_MEM_ENHANCE                       NO
MEM_ENHANCE_LIMIT                     0
__PARAM_CHANGED___                    0
__PARAM_VERIFIED__                    2008-05-13 13:47:17
DIAG_HISTORY_NUM                      2
DIAG_HISTORY_PATH                     E:\_mp\u_v_dbs\EVERW_C5\DIAGHISTORY
DIAGSEM                             1
SHOW_MAX_STACK_USE                    NO
LOG_SEGMENT_SIZE                      21333
SUPPRESS_CORE                         YES
FORMATTING_MODE                       PARALLEL
FORMAT_DATAVOLUME                     YES
HIRES_TIMER_TYPE                      CPU
LOAD_BALANCING_CHK                    0
LOAD_BALANCING_DIF                    10
LOAD_BALANCING_EQ                     5
HS_STORAGE_DLL                        libhsscopy
HS_SYNC_INTERVAL                      50
USE_OPEN_DIRECT                       NO
SYMBOL_DEMANGLING                     NO
EXPAND_COM_TRACE                      NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC      YES
OPTIMIZE_JOIN_PARALLEL_SERVERS        0
OPTIMIZE_JOIN_OPERATOR_SORT           YES
OPTIMIZE_JOIN_OUTER                   YES
JOIN_OPERATOR_IMPLEMENTATION          IMPROVED
JOIN_TABLEBUFFER                      128
OPTIMIZE_FETCH_REVERSE                YES
SET_VOLUME_LOCK                       YES
SHAREDSQL                             NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT      1500
SHAREDSQL_COMMANDCACHESIZE            32768
MEMORY_ALLOCATION_LIMIT               0
USE_SYSTEM_PAGE_CACHE                 YES
USE_COROUTINES                        YES
MIN_RETENTION_TIME                    60
MAX_RETENTION_TIME                    480
MAX_SINGLE_HASHTABLE_SIZE             512
MAX_HASHTABLE_MEMORY                  5120
HASHED_RESULTSET                      NO
HASHED_RESULTSET_CACHESIZE            262144
AUTO_RECREATE_BAD_INDEXES             NO
LOCAL_REDO_LOG_BUFFER_SIZE            0
FORBID_LOAD_BALANCING                 NO

>
Lars Breddemann wrote:
> Hi Michael,
>
> this really looks like one of those "Find-the-5-errors-in-the-picture" riddles to me.
> Really.
>
> Ok, first to your question: this seems to be a bug - I could reproduce it with my 7.5. Build 48.
> Anyhow, when I use
>
> insert into "AZ_Z_TEST02" values (87,'','','','','','','','','','','','','','','',''
>                                           ,'','','','','','','','','','','','','','','','')
>
> it works fine.
It solves my problem. Thanks a lot. -- I hardly can believe that this is all needed to solve the bug. This may be the reason why I have not given it a try.
>
Since explicitely specifying all values for an insert is a good idea anyhow (you can see directly, what value the new tupel will have), you may want to change your code to this.
>
> Now to the other errors:
> - 28 Long values per row?
> What the heck is wrong with the data design here?
> Honestly, you can save data up to 2 GB in a BLOB/CLOB.
> Currently, your data design allows 56 GB per row.
> Moreover 26 of those columns seems to belong together originally - why do you split them up at all?
>
> - The "ZTB_NAMEOFREPORT" looks like something the users see -
> still there is no unique constraint preventing that you get 10000 of reports with the same name...
You are right. This table looks a bit strange. The story behind it is: Each crystal report in the application has a few textblocks which are the same for all the e.g. persons the e.g. letter is created for. Principally, the textblocks could be directy added to the crystal report. However, as it is often the case, these textblocks may change once in a while. Thus, I put the texts of the textblock into this "strange" db table (one row for each report, one field for each textblock, the name of the report is given by "ztb_nameofreport"). And the application offers a menue by which these textblocks can be changed. Of course, the fields in the table could be of type CHAR, but LONG has the advantage that I do not have to think about the length of the field, since sometime the texts are short and sometimes they are really long.
(These texts would blow up the sql select command of the crystal report very much if they were integrated into the this select command. Thus it is realized in another way: the texts are read before the crystal report is loaded, then the texts are "given" to the crystal report (by its parameters), and finally the crystal report is loaded.)
>
- MaxDB 7.5 Build 26 ?? Where have you been the last years?
> Really - download the 7.6.03 Version [here|https://www.sdn.sap.com/irj/sdn/maxdb-downloads] from SDN and upgrade.
> With 7.6. I was not able to reproduce your issue at all.
The customer still has Win98 clients. MaxDB odbc driver 7.5.00.26 does not work for them. I got the hint to use odbc driver 7.3 (see [lists.mysql.com/maxdb/25667|lists.mysql.com/maxdb/25667]). Do MaxDB 7.6 and odbc driver 7.3 work together?
All Win98 clients may be replaced by WinXP clients in the near future. Then, an upgrade may be reasonable.
>
- Are you really putting your data into the DBA schema? Don't do that, ever.
> DBM/SUPERDBA (the sysdba-schemas) are reserved for the MaxDB system tables.
> Create a user/schema for your application data and put your tables into that.
>
> KR Lars
In the first MaxDB version I used, schemas were not available. I haven't changed it afterwards. Is there an easy way to "move an existing table into a new schema"?
Michael

Diff Between Internal Table with Occurs 0 & Field Groups

Hi,
Is there really any difference between just using an internal table with an OCCURS 0 statement-- which would write the entire table to paging space-- and using field-groups? How is Field-Groups is more effective than Internal tables with occurs 0 when it comes to performance?
Could anybody please give some information regarding above question?
Thanks,
Mohan.

hi,
occurs 0 means it wont create any extra memory. based on the records only the memory is allocated to internal tables at run time. but when an internal table is created it can hold data of type to which it is declared.
i.e data: itab like mara occurs 0 with header line.
can take data only from mara table
we can also do in another way as using types keyword we can declare a standard structure and create a internal table of that type. its also not that useful as we have to change the structure depending on changes for storing data.
for this purpose field symbols are used. field symbols can hold any data means that they can point to tables, fields, any standard or user-defined types. field symbols actually points to respective types by which we can directly access to that types using field symbols.
filed symbols works more faster than internal tables.
if helpful reward some points.
with regards,
Suresh.A

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

Web Analysis : populate the same table with multiple data sources

Hi folks,
I would like to know if it is possible to populate a table with multiple data sources.
For instance, I'd like to create a table with 3 columns : Entity, Customer and AvgCostPerCust.
Entity and Customer come from one Essbase, AvgCostPerCust comes from HFM.
The objective is to get a calculated member which is Customer * AvgCostPerCust.
Any ideas ?
Once again, thanks for your help.

I would like to have the following output:
File 1 - Store 2 - Query A + Store 2 - Query B
File 2 - Store 4 - Query A + Store 4 - Query B
File 3 - Store 5 - Query A + Store 5 - Query B
the bursting level should be give at
File 1 - Store 2 - Query A + Store 2 - Query B
so the tag in the xml has to be split by common to these three rows.
since the data is coming from the diff query, and the data is not going to be under single tag.
you cannot burst it using concatenated data source.
But you can do it, using the datatemplate, and link the query and get the data for each file under a single query,
select distinct store_name from all-stores
select * from query1 where store name = :store_name === 1st query
select * from query2 where store name = :store_name === 2nd query
define the datastructure the way you wanted,
the xml will contain something like this
<stores>
<store> </store> - for store 2
<store> </store> - for store 3
<store> </store> - for store 4
<store> </store> - for store 5
<stores>
now you can burst it at store level.

R4 EA: Error loading a table with an XMLTYPE field

When I try to view the data in a table with an XMLTYPE field I get the following error in R4 EA Version 4.0.0.12 Build MAIN-12-27. This works in 2.2 and 3.0.
oracle.sqldeveloper.migration.application
     Error: Resource not found: ${SCRATCH_COMMAND_ICON}.
Double clicking on the error opens the EXTENSION.XML file and shows this line:
<trigger-hooks xmlns="http://xmlns.oracle.com/ide/extension">

<triggers xmlns:c="http://xmlns.oracle.com/ide/customization">
    <actions xmlns="http://xmlns.oracle.com/jdeveloper/1013/extension">
      <action id="MigrationProject.ApplicationScan">
        <properties>
          <property name="Name">${APPSCAN_TITLE}</property>
          <property name="MnemonicKey">${APPSCAN_TITLE2}</property>
          <property name="SmallIcon">res:${SCRATCH_COMMAND_ICON}</property>
        </properties>
      </action>
    </actions>
The table has the following definition:
ID    NUMBER(38,0)    No
WS_DATA    XMLTYPE    Yes
WS_SNAPSHOT_ID    NUMBER(38,0)    No
Any help would be greatly appreaciated. We have to upgrade to 4.0 because our security team will no longer allow Java 6 on any server or workstation.
Thanks,
Steve

Hi Steve
Still no response?
I am having same issue when querying a table with XMLTYPE.
How is your XMLTYPE stored in the DB, as a CLOB or as a BINARY XML?
Regards,
Shaun

Using ConnBean and CursorBean with a Data Source

Hi all,
I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
<%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
<jsp:setProperty name="cbean" property="dataSource"
value="<%=request.getParameter("datasource")%>"/>
</jsp:useBean>
<% try {
cbean.connect();
String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
out.println(cb.getResultAsHTMLTable());
cb.close();
cbean.close();
} catch (SQLException e) {
out.println("<P>" + "There was an error doing the query:");
out.println("<PRE>" + e + "</PRE>\n<P>"); }
%>
Does anyone know how to set the "Property" to a datasource and make it work?
Best regards,
MHCI

There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
- Mike

How to compare two rows from two table with different data

how to compare two rows from two table with different data
e.g.
Table 1
ID   DESC
1     aaa
2     bbb
3     ccc
Table 2
ID   DESC
1     aaa
2     xxx
3     ccc
Result
2

Create
table tab1(ID
int ,DE char(10))
Create
table tab2(ID
int ,DE char(10))
Insert
into tab1 Values
(1,'aaa')
Insert
into tab1 Values
(2,'bbb')
Insert
into tab1 Values(3,'ccc')
Insert
into tab1 Values(4,'dfe')
Insert
into tab2 Values
(1,'aaa')
Insert
into tab2 Values
(2,'xx')
Insert
into tab2 Values(3,'ccc')
Insert
into tab2 Values(6,'wdr')
SELECT
tab1.ID,tab2.ID
As T2 from tab1
FULL
join tab2 on tab1.ID
= tab2.ID
WHERE
BINARY_CHECKSUM(tab1.ID,tab1.DE)
<> BINARY_CHECKSUM(tab2.ID,tab2.DE)
OR tab1.ID
IS NULL
OR
tab2.ID IS
NULL
ID column considered as a primary Key
Apart from different record,Above query populate missing record in both tables.
Result Set
ID ID
2 2
4 NULL
NULL 6
ganeshk

Sample report for filling the database table with test data .

Hi ,
Can anyone provide me sample report for filling the database table with test data ?
Thanks ,
Abhi.

hi
the code
data : itab type table of Z6731_DEPTDETAIL,
wa type Z6731_DEPTDETAIL.
wa-DEPT_ID = 'z897hkjh'.
wa-DESCRIPTION = 'computer'.
append wa to itab.
wa-DEPT_ID = 'z897hkjhd'.
wa-DESCRIPTION = 'computer'.
append wa to itab.
loop at itab into wa.
insert z6731_DEPTDETAIL from wa.
endloop.
rewards if helpful

SOA 11g DBAdapter Polling using a Sequencing Table with a DATE Field

Similar Messages

Maybe you are looking for