SOA Purging Scripts failing
Hi All,
I am following the below Oracle post for running the SOA Purging scripts.
http://docs.oracle.com/cd/E23943_01/admin.1111/e10226/soaadmin_partition.htm#SOAAG97396
When I follow Step 3 under 9.3.6 Executing the Purge Scripts the script is failing with the below errors. What I have observed is that @@ file name under package is not getting executed.
For Example : purge_bpel_oracle.sql is failing because of @@ and all other files are failing because of this issue.
CREATE OR REPLACE
PACKAGE body soa_orabpel
AS
@orabpel_pruneOpenCompositeIDs.sql
@orabpel_deleteComponentInstances.sql
@orabpel_deleteNoCompositeIdInstances.sql
@orabpel_deleteComponentInstancesDOP.sql
@orabpel_isComponentPartitioned.sql
END soa_orabpel;
I tried giving complete path of the file even then it is failing.
CREATE OR REPLACE
PACKAGE body soa_orabpel
AS
@D:\WeblogicMiddleware1117\Oracle_SOA1\rcu\integration\soainfra\sql\soa_purge\orabpel\orabpel_pruneOpenCompositeIDs.sql
@D:\WeblogicMiddleware1117\Oracle_SOA1\rcu\integration\soainfra\sql\soa_purge\orabpel\orabpel_deleteComponentInstances.sql
@D:\WeblogicMiddleware1117\Oracle_SOA1\rcu\integration\soainfra\sql\soa_purge\orabpel\orabpel_deleteNoCompositeIdInstances.sql
@D:\WeblogicMiddleware1117\Oracle_SOA1\rcu\integration\soainfra\sql\soa_purge\orabpel\orabpel_deleteComponentInstancesDOP.sql
@D:\WeblogicMiddleware1117\Oracle_SOA1\rcu\integration\soainfra\sql\soa_purge\orabpel\orabpel_isComponentPartitioned.sql
END soa_orabpel;
SQL> @soa_purge_scripts.sql
Procedure created.
Procedure created.
Procedure created.
Procedure created.
Function created.
Function created.
Function created.
Function created.
Procedure created.
Function created.
Procedure created.
Procedure created.
Type created.
Type body created.
PL/SQL procedure successfully completed.
Package created.
Warning: Package Body created with compilation errors.
PL/SQL procedure successfully completed.
Package created.
Warning: Package Body created with compilation errors.
PL/SQL procedure successfully completed.
Package created.
Warning: Package Body created with compilation errors.
PL/SQL procedure successfully completed.
Package created.
Warning: Package Body created with compilation errors.
PL/SQL procedure successfully completed.
Package created.
Warning: Package Body created with compilation errors.
Package created.
Warning: Package Body created with compilation errors.
PL/SQL procedure successfully completed.
Package created.
SP2-0310: unable to open file "delete_instances.sql"
SP2-0310: unable to open file "delete_insts_in_parallel_job.sql"
SP2-0310: unable to open file "delete_instances_in_parallel.sql"
Warning: Package Body created with compilation errors.
SQL> show errors;
Errors for PACKAGE BODY SOA:
LINE/COL ERROR
3/17 PLS-00323: subprogram or cursor 'DELETE_INSTANCES' is declared in
a package specification and must be defined in the package body
14/11 PLS-00323: subprogram or cursor 'DELETE_INSTANCES_IN_PARALLEL' is
declared in a package specification and must be defined in the
package body
27/11 PLS-00323: subprogram or cursor 'DELETE_INSTS_IN_PARALLEL_JOB' is
declared in a package specification and must be defined in the
package body
Can any one help me on the above issue.
I resolved the issue.
I logged in as dev_soa_infra user and changed all the relative path to absolute path and the script worked.
Similar Messages
-
Scheduling of SOA purge instances (11.1.1.7) generating logs
What is best practice for scheduling the purging of SOA instances using the Oracle Soa purge strategy?
Followed the instructions successfully http://docs.oracle.com/cd/E29542_01/admin.1111/e10226/soaadmin_partition.htm#SOAAG97268
My requirements:
For each purge run a unique log must be generated on the filesystem.
The purging must be done frequently according to a schedule (i.e. daily 8pm).
My issue:
when I run the looped purge (soa.delete_instances), logs are not being generated as expected within the SOA_PURGE_DIR.
logs are only generated in SOA_PURGE_DIR when I execute the parallel purge (soa.delete_instances_in_parallel). I need to run looped purge and not parallel purge.
Current scenario (workaround to generate logs (seems a bit overkill)):
DBMS_Scheduler job invoking a shell script
Shell script invokes a custom sql script spooling the output to a log file
Custom sql script invokes the Oracle soa.delete_instances procedure setting all the parameters
soa.delete_instances runs.
Preferred scenario (not working):DBMS_Scheduler job (PL/SQL block) -> Oracle SOA Purge procedure
DBMS_Scheduler:
BEGIN
dbms_scheduler.create_job('SOA_PURGE',
job_type =>'EXECUTABLE',
job_action =>'/stage/scripts/sh/soa_purge.sh',
number_of_arguments =>0,
start_date =>TO_TIMESTAMP_TZ('27-NOV-2014 08.00.00.000000000 PM +01:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'),
repeat_interval =>'FREQ=DAILY',
end_date =>NULL,
job_class =>'DEFAULT_JOB_CLASS',
enabled =>TRUE,
auto_drop =>FALSE,
comments =>'Job to purge the data from dehydration gateway database.'
COMMIT;
END;
Shell script:
SPOOL_FILE1=/stage/logs/soa_purge_$(date +%Y_%M_%DT%H_%M_%S).log
sqlplus "user/password" <<EOF
alter session set nls_date_format = 'dd/mm/yyyy hh24:mi:ss';
SET linesize 100
SET pagesize 300
SET time on
SET timing on
spool ${SPOOL_FILE1}
@@/stage/scripts/sql/debug_on.sql
@@/stage/scripts/sql/soa_purge_test.sql
@@/stage/scripts/sql/debug_off.sql
spool off;
set time off;
exit;
EOF
Custom script (soa_purge_test.sql (above)):
SET SERVEROUTPUT ON;
DECLARE
MAX_CREATION_DATE TIMESTAMP;
MIN_CREATION_DATE TIMESTAMP;
BATCH_SIZE INTEGER;
MAX_RUNTIME INTEGER;
RETENTION_PERIOD TIMESTAMP;
BEGIN
MIN_CREATION_DATE := TO_TIMESTAMP(TO_CHAR(sysdate-90, 'YYYY-MM-DD'),'YYYY-MM-DD');
MAX_CREATION_DATE := TO_TIMESTAMP(TO_CHAR(sysdate-30, 'YYYY-MM-DD'),'YYYY-MM-DD');
RETENTION_PERIOD := TO_TIMESTAMP(TO_CHAR(sysdate-29, 'YYYY-MM-DD'),'YYYY-MM-DD');
MAX_RUNTIME := 1380;
BATCH_SIZE := 250000;
SOA.DELETE_INSTANCES(
MIN_CREATION_DATE => MIN_CREATION_DATE,
MAX_CREATION_DATE => MAX_CREATION_DATE,
BATCH_SIZE => BATCH_SIZE,
MAX_RUNTIME => MAX_RUNTIME,
RETENTION_PERIOD => RETENTION_PERIOD
END;What is best practice for scheduling the purging of SOA instances using the Oracle Soa purge strategy?
Followed the instructions successfully http://docs.oracle.com/cd/E29542_01/admin.1111/e10226/soaadmin_partition.htm#SOAAG97268
My requirements:
For each purge run a unique log must be generated on the filesystem.
The purging must be done frequently according to a schedule (i.e. daily 8pm).
My issue:
when I run the looped purge (soa.delete_instances), logs are not being generated as expected within the SOA_PURGE_DIR.
logs are only generated in SOA_PURGE_DIR when I execute the parallel purge (soa.delete_instances_in_parallel). I need to run looped purge and not parallel purge.
Current scenario (workaround to generate logs (seems a bit overkill)):
DBMS_Scheduler job invoking a shell script
Shell script invokes a custom sql script spooling the output to a log file
Custom sql script invokes the Oracle soa.delete_instances procedure setting all the parameters
soa.delete_instances runs.
Preferred scenario (not working):DBMS_Scheduler job (PL/SQL block) -> Oracle SOA Purge procedure
DBMS_Scheduler:
BEGIN
dbms_scheduler.create_job('SOA_PURGE',
job_type =>'EXECUTABLE',
job_action =>'/stage/scripts/sh/soa_purge.sh',
number_of_arguments =>0,
start_date =>TO_TIMESTAMP_TZ('27-NOV-2014 08.00.00.000000000 PM +01:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'),
repeat_interval =>'FREQ=DAILY',
end_date =>NULL,
job_class =>'DEFAULT_JOB_CLASS',
enabled =>TRUE,
auto_drop =>FALSE,
comments =>'Job to purge the data from dehydration gateway database.'
COMMIT;
END;
Shell script:
SPOOL_FILE1=/stage/logs/soa_purge_$(date +%Y_%M_%DT%H_%M_%S).log
sqlplus "user/password" <<EOF
alter session set nls_date_format = 'dd/mm/yyyy hh24:mi:ss';
SET linesize 100
SET pagesize 300
SET time on
SET timing on
spool ${SPOOL_FILE1}
@@/stage/scripts/sql/debug_on.sql
@@/stage/scripts/sql/soa_purge_test.sql
@@/stage/scripts/sql/debug_off.sql
spool off;
set time off;
exit;
EOF
Custom script (soa_purge_test.sql (above)):
SET SERVEROUTPUT ON;
DECLARE
MAX_CREATION_DATE TIMESTAMP;
MIN_CREATION_DATE TIMESTAMP;
BATCH_SIZE INTEGER;
MAX_RUNTIME INTEGER;
RETENTION_PERIOD TIMESTAMP;
BEGIN
MIN_CREATION_DATE := TO_TIMESTAMP(TO_CHAR(sysdate-90, 'YYYY-MM-DD'),'YYYY-MM-DD');
MAX_CREATION_DATE := TO_TIMESTAMP(TO_CHAR(sysdate-30, 'YYYY-MM-DD'),'YYYY-MM-DD');
RETENTION_PERIOD := TO_TIMESTAMP(TO_CHAR(sysdate-29, 'YYYY-MM-DD'),'YYYY-MM-DD');
MAX_RUNTIME := 1380;
BATCH_SIZE := 250000;
SOA.DELETE_INSTANCES(
MIN_CREATION_DATE => MIN_CREATION_DATE,
MAX_CREATION_DATE => MAX_CREATION_DATE,
BATCH_SIZE => BATCH_SIZE,
MAX_RUNTIME => MAX_RUNTIME,
RETENTION_PERIOD => RETENTION_PERIOD
END; -
SOA Purge using delete_instances on SNAP
Hi,
We have SOA 11g 11.1.1.5. In our Production Database our SOA schema size is over 1.5 TB. The current purge script we have is not deleting all the instances and so the Database size is growing. We decided to use the below as we really don't need any data beyond 1 week.
SOA_SOAINFRA.soa.delete_instances(
min_creation_date => min_creation_date,
max_creation_date => max_creation_date,
batch_size => batch_size,
max_runtime => max_runtime,
retention_period => retention_period,
ignore_state => true,
purge_partitioned_component => false);
In order to use this as a scheduled job we want to delete the old data first. It's taking way too long to even delete even a one week of old data. So we want to see if the below approach will work.
Take the SNAP of Production Database and then run the above script and purge the data.
Reclaim the space following Oracle Note "How to Free Space from LOB Segments in the SOA Schema (Doc ID 1380989.1)"
Use this version of SNAP for the Production Database.
Any feedback is appreciated
ThanksHi Vipin,
Thanks for your replay, I even tried with the commands you mentioned. I was trying to include the time frame in the below purge script it is not working:
DECLARE
MAX_CREATION_DATE timestamp;
MIN_CREATION_DATE timestamp;
batch_size integer;
max_runtime integer;
retention_period timestamp;
BEGIN
MIN_CREATION_DATE := to_timestamp('2010-01-01','YYYY-MM-DD');
MAX_CREATION_DATE := to_timestamp('2010-01-31','YYYY-MM-DD');
max_runtime := 60;
retention_period := to_timestamp('2010-01-31','YYYY-MM-DD');
batch_size := 10000;
soa.delete_instances(
min_creation_date => MIN_CREATION_DATE,
max_creation_date => MAX_CREATION_DATE,
batch_size => batch_size,
max_runtime => max_runtime,
retention_period => retention_period,
purge_partitioned_component => false);
END; -
Hi All,
I have a database with version
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit ProductionI have a purge script to purge the database which is not working. Can anyone tell has oracle released any purge scripts for purging 11G database.
DECLARE
MAX_CREATION_DATE timestamp;
MIN_CREATION_DATE timestamp;
batch_size integer;
max_runtime integer;
retention_period timestamp;
BEGIN
MIN_CREATION_DATE := to_timestamp('2012-03-10','YYYY-MM-DD');
MAX_CREATION_DATE := to_timestamp('2012-03-20','YYYY-MM-DD');
max_runtime := 20;
retention_period := to_timestamp('2012-03-20','YYYY-MM-DD');
batch_size := 20000;
soa.delete_instances(
min_creation_date => MIN_CREATION_DATE,
max_creation_date => MAX_CREATION_DATE,
batch_size => batch_size,
max_runtime => max_runtime,
retention_period => retention_period,
purge_partitioned_component => false);
END;Thanks
DUOSYou need to be more specific.
First, you said that you wanted to purge your database, and then the tablespace, and finally, some tables...
If you want to flush data from a table completelly, use TRUNCATE TABLE.
If you want to remove some rows of that table, use DELETE FROM TABLE WHERE [your condition here] -
Error while runnig OIM task purging script OIM_TasksArch.sh
Error while runnig OIM task purging script OIM_TasksArch.sh
## Enter date in YYYYMMDD format
(All the task data for users which have been disabled/deleted on or before the entered date would be archived) :
## All the task data for users which have been disabled/deleted on or before TODAY's date would be archived,
Do you want to continue [y,Y,n,N]? :
y
Calculating the number of records that would be archived,
this may take some time, please wait...
ERROR ==> An error has occurred during the process
Please check logs created at /export/home/oracle/Purging_Task/Err_Arch_tasks_2012_11_05_16_51_22.log and try again
./OIM_TasksArch.sh: test: argument expected
bash-3.00$ cat /export/home/oracle/Purging_Task/Err_Arch_tasks_2012_11_05_16_51_22.log
-- Task Archival Execution Status
Task Data Archival Summary
ORA-00942: table or view does not existIn this link you resolved this issue by giving all privileges to DEV_OIM...
Re: Getting error while running OIM in built purging script OIM_ReconArch.sh
Now if again this ORA-00942: table or view does not exist is coming, possibility is that there is no issue regarding privileges as you already have given all privileges to DEV_OIM...
Anyway try again giving full permissions to it just in case for some reasons permissions might have reset...
Now the only option is to study OIM_TasksArch.sh and figure out which tables or view it wants to refer to and is not available to it..
*./OIM_TasksArch.sh: test: argument expected*
The above line means that this sh file needs some arguments... Please study a bit more to figure out those arguments.. It will work...
*23.2.1 Understanding the Task Archival Utility*
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/archival_utilities.htm#OMADM3033
Following Parameters i.e. Arguments are needed
# File : OIM_TasksArch.sh
# Purpose : To archive data from active task tables to archival task
# tables and to delete data from active task tables.
# Arguments : 1 --> Location of the Oracle Home(ORACLE_HOME)
# 2 --> Oracle Identity Manager Database Name
# 3 --> Oracle Identity Manager Database User Name
# 4 --> Password for the Oracle Identity Manager Database User -
Script fails when passing values from pl/sql to unix variable
Script fails when passing values from pl/sql to unix variable
Dear All,
I am Automating STATSPACK reporting by modifying the sprepins.sql script.
Using DBMS_JOB I take the snap of the database and at the end of the day the cron job creates the statspack report and emails it to me.
I am storing the snapshot ids in the database and when running the report picking up the recent ids(begin snap and end snap).
From the sprepins.sql script
variable bid number;
variable eid number;
begin
select begin_snap into :bid from db_snap;
select end_snap into :eid from db_snap;
end;
This fails with the following error:
DB Name DB Id Instance Inst Num Release Cluster Host
RDMDEVL 3576140228 RDMDEVL 1 9.2.0.4.0 NO ibm-rdm
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
But when I change the select statements below the report runs successfully.
variable bid number;
variable eid number;
begin
select '46' into :bid from db_snap;
select '47' into :eid from db_snap;
end;
Even changing the select statements to:
select TO_CHAR(begin_snap) into :bid from db_snap;
select TO_CHAR(end_snap) into :eid from db_snap;
Does not help.
Please Help.
TIA,
NischalHi,
could it be the begin_ and end_ Colums of your query?
Seems SQL*PLUS hs parsing problems?
try to fetch another column from that table
and see if the error raises again.
Karl -
Start up script fails; Unable to boot...Please, Help.
This is my first major problem that I have had with this computer. It has been running fine until this past Sunday night. I was running AOL, Firefox & iTunes. The computer was running slow and iTunes was skipping frequently. I rebooted and resumed my activities only to have the same problems and the computer booted slower than usual. I closed all my applications and rebooted once again. Then, I ran Disk Utility had used Verify Disk. It found an error on my system volume stating an incorrect block count in one sector and referenced a file cache_003, all other volumes passed. Disk Utility was unable to repair the volume. Repair Disk ran slow. I did a search for the file cache_003 and discovered that it was part of a Netscape profile back up on a different partition. I deleted the profile and used Disk Utility again. This time, the system volume passed and a different volume failed due to incorrect block size, Repair Disk failed. The next time I tried to boot the computer the gray screen with apple and loading indicator came up and stayed for several minutes followed by a blue screen with loading indicator for several minutes and stayed blue for nearly 40 minutes. Eventually, the screen went black and displayed that the start up script failed. Here is some of what was displayed.
Darwin/BSD(Computer Name-Computer.local)(console)
System Starter[35]
login date&time Internet Sharing[96]:Libinfo[Socket_open():2318]connect():2318]connect:()connection refused (This line repeated continuously)
I am able to input commands at this stage but I am not knowledgeable enough to know what to do.
When I push the power button to turn it off the computer beeps once and the led light flashes three times and turns off.
Each time when I attempt to boot either into Safe Mode or from the Software Install DVD I encounter the same problem.
Now, Monday night by chance on another boot attempt the computer started up although it took about 20-30 minutes. It was missing one volume which showed up in Disk Utility under a different name. While I had the computer up I backed up what I could on the volumes that mounted. One file I was unable to burn using Toast 9 due to a data fork error. The computer eventually froze during my activities and since I have had no luck at my start up attempts and have had the same problem. Luckily, I was able to back up everything I needed with the exception of what was on the AWOL volume.
The last thing I had installed recently was the latest Security Update which went fine and was two days before the trouble started.
I am at a loss for what to do next. I would like to retrieve the files on that one volume but at this point if I can start up I would just like to reformat and install the OS.
Any help with this problem would be much appreciated. Thank you.Well, originally when I ran Disk Utility, although it performed slower than usaual it found the error as previously mentioned and was unable to Repair Volume. As to using the Hardware Disc & Install Discs(original & Tiger) the computer failed to boot although you could hear the disc spinnning for awhile. In both and every instance regardless of any or no disc, the computer starts the boot process and you see the gray screen with white apple and loading indicator for about 3 minutes then it switches to the blue screen with loading indicator. After quite some time the loading indicator goes away and it's just a blue screen for nearly a half-hour followed by a black screen which starts the above prompt. I can post all of what that said later as I have written all of it down at home, a portion of it is in my original post. The start up chime doesn't sound at all. I do get a tone and flashing LED lights when I hold the power button down to turn it off after the above described boot process. There is not much I can do except try and try again. I may need to get a new hard drive but I would like to resolve it without doing so if possible. When trying to boot from both discs I was holding down the C key as directed and I have tried just letting the computer boot with disc in drive without any key interaction.
-
Getting error while running OIM in built purging script OIM_ReconArch.sh
Getting error while running OIM in built purging script OIM_ReconArch.sh
bash-3.00$ cat Err_Arch_Recon_2012_11_01_15_36_06.log
-- Reconciliation Archival Execution Status
BEGIN OIM_SP_ReconArchival('N','N',200000,'ARCHIVE_SELECT_WITH_CONS_DROP_REC','Both Events','20110101','20111231'); END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
ORA-00942: table or view does not exist
ORA-01031: insufficient privileges
ORA-06512: at line 1
Please HelpORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
ORA-00942: table or view does not exist
ORA-01031: insufficient privileges
(1) Check whether the OIM_SP_RECONARCHIVAL table or view exists or not...
(2) If it exists, check whether the DEV_OIM user has enough privilege to view this table or not...
If not, give it all privilege by login as sys as sysdba
GRANT ALL PRIVILEGES TO DEV_OIM;
COMMIT; -
Getting Error in Adobe Form as Script failed (language is formcalc:context
Hi Experts,
While acessing Adobe forms from MSS ,
After Selecting the Scenario
After Edit Form
Before the form is Displayed
I am getting a POP-UP message stating the following Error.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0]. PCR_PAGE1[0].PCRheader[0].EmployeeDataCI[0].EmployeeDataCIContent[0].EmployeeInfo[0])
Script=concat($record.ENAME.DATA.FIELD,u201D(u201C,$record.PERNR.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.ENAME.DATA.FIELDu2019is unknown.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0].PCR_PAGE1[0].PCR_DE[0].PCRDEContent[0].RequestSeparationEnhanceDDLOverlay[0])
Script=concat($record.MGTXT.DATA.FIELD,u201D(u201C,$record.MASSG.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.MGTXT.DATA.FIELDu2019is unknown.
ENAME & MGTXT are the fields which has to be displayed by default when the form is shown.
But when the Adobe form is displayed it comes without any Value for ENAME - Employee Name
MGTXT - Reason for Action Text .
Please provide me solution to over come this problem.
Thanking you in advance,
Suriya.This was fixed by commenting the script in the form since I don't require it.
Suriya -
The Group Policy client-side extension Scripts failed ...
This is an error I've been seeing forever and it was always the impression that upgrading would resolve it, but it never has even in 10.3. 100% of our users get these errors in the Event Viewer:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1085
Date: 10/21/2010
Time: 8:04:52 AM
User: NT AUTHORITY\SYSTEM
Computer: XXXXXX
Description:
The Group Policy client-side extension Scripts failed to execute. Please look for any errors reported earlier by that extension.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
We also seem to have flakey policy issues where once in awhile a user will not be able to logon to Windows with Workstation Only while getting the " not allowed to logon interactively" message, other times the users report not being able to access the Windows Date and Time Properties and further sometimes they are unable to make system changes.
We have troubleshooted this and the only resolutions we've found are to run zac cc, zac ref, zac pl and sometimes it seems like deleting c:\windows\system32\grouppolicy will help.
In regards to the Event Viewer entry I posted, on any given machine I can issue the command gpupdate and it will put another entry into the Event Viewer (sometimes multiple ones). I've learned through research that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the errors go away, but once the policy is refreshed they come right back.
This is the version ZenWorks gives the users:
[General]
gPCFunctionalityVersion=2
gPCFunctionalityVersion=2
gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
Version=6488106
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
This is the version I cleaned up:
[General]
gPCFunctionalityVersion=2
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
I'm not sure how to get Zenworks to use the cleaned up version nor and I too sure what those extra extensions are and how they got in there. I may need to contact Novell in regards to this, but since I'm already working on an SR with them I figured I'd go ahead and post here first.
Any help or advice would be greatly appreciated.Here are the groups I'm using. NOTE: These have been in affect throughout the issues experienced. Users will work perfectly fine then suddenly the problem will start happening without any policy change on our side.
-Member of-
Network Configuration Operators+
Remote Desktop Users+
Users+
-Assigned Rights under a group I called "Other Rights"-
Access this computer from network
Change the system time
Log on locally
Shut down the system
The only condition I have is that these issues happen when logging in Workstation Only and I'm not able to recreate the problem on demand with tests.
Originally Posted by craig_wilson
The "Interactive Logon" is a Windows Security Permission.
It is generally assigned to certain local groups such as "User".
Which groups are assigned this right can be changed manually and
controlled by local security policies.
When user's get this error, it generally means their account is not in a
local group that has been assigned that right.
If using "DLU", make sure the user accounts are a member of "Users".
And If anyone was messing with security policies, make sure they did not
take away "Interactive Logons" from anyone.
On 10/29/2010 7:06 AM, jcsmith1 wrote:
>
> Thanks for replying craig.
>
> My policy woes have only grown since my first post. We are currently
> testing the removal of administrative rights and now we're having
> teleworkers (who login Workstation Only) getting the message "policy
> does not allow interactive login". What -seems- to fix it is a zac cc,
> zac ref and zac pl, however we just started getting call backs from
> users.
>
> I seem to have no further leads and Novell's ZenWorks tech supports
> seems to be going through some kind of painful-to-the-customer
> transition as one of my thoughts on resolving the issue is to go to 10.3
> or 10.3.1, but my Satellites appear to be upgrading but in reality do
> not upgrade (but the primary servers upgraded) (See SR 10655976331).
>
> Does anyone knows how to troubleshoot policy issues when the users
> aren't loggin into ZCM?
>
> craig_wilson;2036646 Wrote:
>> See: 'Group Policy Error: The Group Policy client-side extension Script
>> failed to execute.'
>> (Group Policy Error: The Group Policy client-side extension Script failed to execute.)
>>
>> This would never be fixed in any patch, since it would be the job of
>> GPEDIT to properly maintain the GPT.INI.
>>
>> Most of the Time these errors are cosmetic and caused by stray script
>> extensions.
>>
>> You may want to create an Enhancement Request to allow the creation of
>> "Filters" so certain errors are discarded and not sent to the DB/ZCC.
>> This way an Admin could choose to filter out various error messages
>> that
>> they deem are not actually of concern.
>>
>> On 10/21/2010 9:36 AM, jcsmith1 wrote:
>>>
>>> This is an error I've been seeing forever and it was always the
>>> impression that upgrading would resolve it, but it never has even in
>>> 10.3. 100% of our users get these errors in the Event Viewer:
>>>
>>> -Event Type: Error
>>> Event Source: Userenv
>>> Event Category: None
>>> Event ID: 1085
>>> Date: 10/21/2010
>>> Time: 8:04:52 AM
>>> User: NT AUTHORITY\SYSTEM
>>> Computer: XXXXXX
>>> Description:
>>> The Group Policy client-side extension Scripts failed to execute.
>>> Please look for any errors reported earlier by that extension.
>>>
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> -
>>> We also seem to have flakey policy issues where once in awhile a
>> user
>>> will not be able to logon to Windows with Workstation Only while
>> getting
>>> the " not allowed to logon interactively" message, other times the
>> users
>>> report not being able to access the Windows Date and Time Properties
>> and
>>> further sometimes they are unable to make system changes.
>>>
>>> We have troubleshooted this and the only resolutions we've found are
>> to
>>> run zac cc, zac ref, zac pl and sometimes it seems like deleting
>>> c:\windows\system32\grouppolicy will help.
>>>
>>> In regards to the Event Viewer entry I posted, on any given machine
>> I
>>> can issue the command gpupdate and it will put another entry into
>> the
>>> Event Viewer (sometimes multiple ones). I've learned through
>> research
>>> that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the
>> errors
>>> go away, but once the policy is refreshed they come right back.
>>>
>>> This is the version ZenWorks gives the users:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
>>>> Version=6488106
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> This is the version I cleaned up:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> I'm not sure how to get Zenworks to use the cleaned up version nor
>> and
>>> I too sure what those extra extensions are and how they got in there.
>> I
>>> may need to contact Novell in regards to this, but since I'm already
>>> working on an SR with them I figured I'd go ahead and post here
>> first.
>>>
>>> Any help or advice would be greatly appreciated.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Ecatt script fails due "Error in OLE API method Call" error
Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN. -
Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
Single server, local SQL install, SQL Server 2012 SP1
Hyper-V VM running on Server 2012. VM has 8GB Ram, single vCPU
Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
See screenshot
http://i.imgur.com/l0Molh1.png
I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue. I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
The SCOM Console launches and responds fine, and I get no other errors. I check the Data Access service and it is online. I have left the system alone for a couple of hours and no other errors. I then closed those alerts and restarted the
server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
Has anyone else come across this before?Please try the method in the following thread:
Note: As there is operations related to Registry, please perform a backup before doing this.
OpsMgr 2012 - Power Shell Script failed to run
http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
Thanks.
Nicholas Li
TechNet Community Support -
Oracle Open Script - Failed to open script error
I am receiving the following error when trying to open a script in Oracle open script
'Failed to open script' has encountered a problem.Failed to open <script_name>. See error log for details.
I have tried the Giri Mandalika's solution but there is no "<failing_script_name>" folder in specified path.
Can someone please help me to resolve this issue ?Hi ,You can try deleting the osworkspace folder .The folder should be at C:\Users\<username>\. May be take a back up copy of the folder before deleting it.Let me know if it works.
-
The PowerShell script failed with below exception
I'm receiving the following errors on all SQL Express Servers (every machine that has SQL Express inside).
it seems that the discovery has found SQL Express but could not connect to the instance.
details on the alerts:
Date and Time:
10/22/2013 12:04:22 PM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Collect Power Shell Module Events
Event Number:
22406
Level:
Error
Logging Computer:
SQLEXPRESS.DOMAIN.COM
User:
N/A
Description:
The PowerShell script failed with below exception
System.Management.Automation.RuntimeException: Exception calling "Fill" with "1" argument(s): "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
At line:44 char:19
+ $SqlAdapter.Fill <<<< ($DataSet)|out-null
at System.Management.Automation.FlowControlNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
Script Name: StolenServerMemory2008.ps1
One or more workflows were affected by this.
Workflow name: Microsoft.SQLServer.2008.DBEngine.StolenServerMemoryMonitor
Instance name: SQLEXPRESS
Instance ID: {9705795C-4F3B-C2EF-AA7D-C736B40FD6A4}
Management group: SCOMGROUPSome additional inf.
http://stackoverflow.com/questions/6466974/unable-to-connect-to-sql-express-error-26-error-locating-server-instance-speci?rq=1
anyway you can disable this rule/monitor as no control from monitoring solution in that case. Or try to rewrite the same monitor...
The problem in your case is when function tries to get Max Server Memory MB by connecting to master DB, but you can replace it with performance counter like Target Server Memory (KB)...
just see the function main in StolenServerMemory2008.ps1 and what you need to replace
$api = New-Object -comObject "MOM.ScriptAPI"
$bag = $api.CreatePropertyBag()
$msg = [Environment]::NewLine
$err = [Environment]::NewLine
#try {
$maxMemoryMB = GetMaxServerMemoryMB $ComputerName $InstanceName
$stolenPages = (Get-Counter ("\" + $PerformanceCounterObject + ":Buffer Manager\Stolen Pages")).CounterSamples[0].CookedValue
$pakeSizeKB = 8
[double]$stolenMemoryMB = $stolenPages * $pakeSizeKB / 1024
[double]$stolenMemoryPercent = 0
if($maxMemoryMB -gt 0){
[double]$stolenMemoryPercent= 100.0 * $stolenMemoryMB / $maxMemoryMB
$bag.AddValue("StolenMemoryMB", $stolenMemoryMB)
$bag.AddValue("StolenMemoryPercent", $stolenMemoryPercent)
$msg += "StolenMemoryMB=$stolenMemoryMB StolenMemoryPercent=$stolenMemoryPercent"
$msg += [Environment]::NewLine
#debug $api.LogScriptEvent("SQL 2008 Stolen Server Memory data source", $SCRIPT_EVENT_ID, $INFORMATION_EVENT_TYPE, $msg + $err)
#catch {
# $header = "Managegement Group: $Target/ManagementGroup/Name$. Script: {0}" -f ($MyInvocation.MyCommand).Name.ToString()
# $msg += "Error occured during SQL 2008 Stolen Server Memory data source executing.{0}Computer:{1} {0}Reason: {2}" -f [Environment]::NewLine, $env:COMPUTERNAME, $_.Exception.Message
# $api.LogScriptEvent($header, $SCRIPT_EVENT_ID, $ERROR_EVENT_TYPE, $msg + $err)
$bag -
CJS-00084 SQL Statement or Script failed. Error Message: Executable
Hello
Hello
I am facing one problem at the time of installing 4.7 IDES can you please guide me on that. Do I need to reinstall system ageing or it can be sort it out in this stage.
ERROR AT THE TIME OF INSTALLING SAP 4.7 IDES ARE
1. CJS-00084 SQL Statement or Script failed. Error Message: Executable
C:\oracle\ora92/bin/sqlplus.exe returns 3.
2. FJS-00012 Error when executing script.
Complete error log :--
INFO 2000-06-15 20:56:57
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: C:\oracle\ora92\database\initGOD.ora.
INFO 2000-06-15 20:56:57
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2000-06-15 20:56:57
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl start' returned with '0'.
INFO 2000-06-15 20:56:58
Copying file D:/SAP_DUMP/CD1/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 20:57:00
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 20:57:00
FJS-00012 Error when executing script.
INFO 2000-06-15 20:56:57
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: C:\oracle\ora92\database\initGOD.ora.
INFO 2000-06-15 20:56:57
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2000-06-15 20:56:57
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl start' returned with '0'.
INFO 2000-06-15 20:56:58
Copying file D:/SAP_DUMP/CD1/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 20:57:00
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 20:57:00
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:29
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:29
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:37
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:37
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:51
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:51
FJS-00012 Error when executing script.
WARNING 2000-06-15 21:07:00
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (276), with parameter (C:\oracle\ora92/bin/sqlplus.exe /NOLOG @ora_scr_tmp.sql).
ERROR 2000-06-15 21:07:00
MDB-06029 Caught exception while trying to start script executing application: [C:\oracle\ora92/bin/sqlplus.exe].
ERROR 2000-06-15 21:07:00
MDB-06030 A call to the system library failed. System error message: [No such file or directory].
ERROR 2000-06-15 21:07:00
MUT-02011 Internal error: A call to syslib failed. System error message: No such file or directory.
ERROR 2000-06-15 21:07:00
FJS-00012 Error when executing script.
WARNING 2000-06-15 21:11:52
Error 1326 (Logon failure: unknown user name or bad password.
) in execution of a 'LogonUser' function, line (537), with parameter (SAPTRANSHOST\godadm).
ERROR 2000-06-15 21:11:52
MDB-06029 Caught exception while trying to start script executing application: [C:\oracle\ora92/bin/sqlplus.exe].
ERROR 2000-06-15 21:11:52
MDB-06030 A call to the system library failed. System error message: [Unknown error].
ERROR 2000-06-15 21:11:52
MUT-02011 Internal error: A call to syslib failed. System error message: Unknown error.
ERROR 2000-06-15 21:11:52
FJS-00012 Error when executing script.
INFO 2000-06-15 21:11:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:11:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:11:54
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:11:54
FJS-00012 Error when executing script.
INFO 2000-06-15 21:13:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:13:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:13:42
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:13:42
FJS-00012 Error when executing script.
INFO 2000-06-16 02:00:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:00:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:00:07
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:00:07
FJS-00012 Error when executing script.
INFO 2000-06-16 02:08:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:08:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:08:18
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:08:18
FJS-00012 Error when executing script.
INFO 2000-06-16 02:09:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:09:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:09:49
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:09:49
FJS-00012 Error when executing script.
INFO 2000-06-16 02:14:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:14:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:14:33
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:14:33
FJS-00012 Error when executing script.> WARNING 2000-06-15 21:07:00
> Error 2 (The system cannot find the file specified.
> ) in execution of a 'CreateProcess' function, line
> (276), with parameter
> (C:\oracle\ora92/bin/sqlplus.exe /NOLOG
> @ora_scr_tmp.sql).
> ERROR 2000-06-15 21:07:00
> MDB-06029 Caught exception while trying to start
> script executing application:
> [C:\oracle\ora92/bin/sqlplus.exe].
> ERROR 2000-06-15 21:07:00
> MDB-06030 A call to the system library failed.
> System error message: [No such file or directory].
> ERROR 2000-06-15 21:07:00
> MUT-02011 Internal error: A call to syslib failed.
> System error message: No such file or directory.
> ERROR 2000-06-15 21:07:00
> FJS-00012 Error when executing script.
> WARNING 2000-06-15 21:11:52
> Error 1326 (Logon failure: unknown user name or bad
> password.
> ) in execution of a 'LogonUser' function, line (537),
> with parameter (SAPTRANSHOST\godadm).
> ERROR 2000-06-15 21:11:52
> MDB-06029 Caught exception while trying to start
> script executing application:
> [C:\oracle\ora92/bin/sqlplus.exe].
is that file there (sqlplus)?
as which user are you installing?
Markus
Maybe you are looking for
-
Is there a way to install Photoshop without all the crap?
I noticed when installing the Adobe Photoshop CS6 trial, even if you check only the bare minimum number of checkboxes, it will still install tons of...crap. e.g. Bridge, Camera Raw, Camera Raw Profile, Dynamic Link Media Server (seriously, does this
-
Issues with Bex query structures and Crystal Reports/Webi
Hi experts, I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following Budget $ Budget % Actual $ Actual % Budget YTD etc if I drag
-
How to use the js in the case of not sure the file name into multiple files to PS?
function place($path){ var idPlc = charIDToTypeID( "Plc " ); var desc28 = new ActionDescriptor(); var idnull = charIDToTypeID( "null" ); desc28.putPath( idnull, new File( $path ) ); var idFTcs = charIDToTypeID( "FTcs" ); var i
-
Selling my G3 B&W, how much should i advertise it for?
I am going to sell my G3 B&W computer and buy myself a nice new apple laptop but I'm not sure how much to advertise it for in my papers, not ebay. I don't have anything against ebay but i won't get as much for it. This is the specification of it: - G
-
DB Link between Oracle 10g and Oracle 9i
Hi all, Please help me to set the dblink between oracle9i and oracle10g. Thanks in advance Regards K. Mahipal Reddy