SOAP and SRT services

Hi all,
I have understood that the services under the node <b>/default_host/sap/bc/soap</b> apply to RFC function modules (thus, including BAPI) and that the list of available RFC FMs were visible at the URL :
http://<server>:<port>/sap/bc/bsp/sap/webservicebrowser/search.html
This is what I would call the "6.20 approach" or the out-of-the-box as stated in /people/sap.user72/blog/2005/12/29/service-enable-your-sap-application-component
You call the <i>wsdl11</i> service with the name of the FM and get the WSDL file
Then, you can call the <i>rfc</i> service to actually call the Web Service.
But, as far as the "6.40 approach", with the creation of the Virtual Interface and the Web Service Definition, is concerned, is there a similar URL, I mean a BSP where you can have the list of Web Services ?
Thanks for your answers.
Best regards,
Guillaume

Well, I just found out these 2 weblogs by Thomas Jung. I should have started from there... thanks Thomas !
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
<b>But still, if someone has an idea about how to get the list of SRT services without specific development... ?</b>
Message was edited by: Guillaume Garcia

Similar Messages

SMP3.0 Kapsel support for SOAP and REST services(not ODATA) and Symbian platfrom

Dear Experts,
Can we develop apps using Kapsel on SOAP and REST services?
As phonegap supports Symbian platform, will Kapsel apps work on Symbian???
Regards
Srini
7730801444

I think you should reconsidering the Phonegap supports Symbian part.
As Phonegap is based upon Cordova, PG basically supports what Cordova supports. Cordova dropped Symbian a while ago. The latest release does not support Symbian: Apache Cordova
The Platform section does not mention Symbian, but does some "exotic" ones like WebOS, Tizen, FirefoxOS.
Same for PG: PhoneGap API Documentation -> no Symbian
Sure, PG 2.x listed Symbian, but 2.x is based on another architecture than PG 3 and Cordova 3. As Kapsel is a set of SAP plugins for Cordova 3, Kapsel needs Cordova 3.
As long as Symbian is not in the list of platform Cordova runs on, there won't be Kapsel for Symbian.

SOAP and XML

How can I setup SOAP and web services to POST and GET XML file from the third party application?
What document can I read? Thanks!

If you are an Oracle9i JDeveloper user, you might want to try the Oracle9i JDeveloper guide which gives you a simple helloworld sample to get you going. This uses the SOAP environment that is automatically configured by default on OC4J. See:
http://otn.oracle.com/sample_code/products/jdev/files/JDevRGuide.zip
The Web service demo shows how an EJB can be published on OC4J as a Web service - basically by configuring a SOAP-aware servlet that front-ends your Java/PL/SQL component.
For a more complete example check out the sample one that just came out the other day covering stateless and stateful Java classes, an EJB and a PL/SQL stored procedure:
http://otn.oracle.com/sample_code/tech/java/web_services/
For a set of examples of Web services that ship with OC4J, download OC4J and look in the directory:
<OC4J_Home>\j2ee\home\demo\web_services\
and take a read of the readme.txt. The area of OTN describing the OC4J Web services content is at:
http://otn.oracle.com/tech/webservices/
If you are looking for the Apache SOAP environment that ships with Oracle9iAS, simply look for the soap.ear file that is on the distribution. Normally this is located in <OC4J_Home>/soap/webapps/ but it might be easier to search the OC4J directory structure because its location changed between the 1.0.2.2 release and Release 2 now available here as noted above.
Hope this gives a start.
Mike.

Apex and web services

Hello everyone,
I've started looking into SOAP and web services, and have used Tyler Muth's tutorial to email and FTP BI publisher reports using APEX.
I was wondering if it is possible to create an on-screen report (i.e. an interactive report) using a web service?
I've managed to return values to form fields using web services...I was always under the impression, from before I looked at web services, that creating an on-screen report using data from a web service was one of the main things you could do....
Please could someone let me know if this is possible, and roughly how you'd go about doing it?
Thank you in advance.
Robin

Hi Robin,
I think I have implemented the same thing which you are trying to do
The followinf is the response of a web service from BI Publisher. You can check the response using the statement
select clob001 from wwv_flow_collections where where collection_name = <name_of_the_collection_u_specified_while_sending_the web_service_request>
<getScheduledReportInfoResponse xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService">
<getScheduledReportInfoReturn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:JobInfo" xmlns:ns1="http://xmlns.oracle.com/oxp/service/PublicReportService">
<ns1:burstingOption>false</ns1:burstingOption>
<ns1:createdDate>2009-11-23T06:03:10.000Z</ns1:createdDate>
<ns1:deliveryDescription xsi:nil="true"/>
<ns1:deliveryParameters xsi:nil="true"/>
<ns1:endDate xsi:nil="true"/>
<ns1:jobGroup>administrator</ns1:jobGroup>
<ns1:jobID>366</ns1:jobID>
<ns1:jobName>603219960-ADMIN-Smaller result set</ns1:jobName>
<ns1:locale>en_GB</ns1:locale>
<ns1:reportName>Adhoc report</ns1:reportName>
<ns1:reportParameters xsi:type="ns1:ParamNameValue">
<ns1:multiValuesAllowed>false</ns1:multiValuesAllowed>
<ns1:name>SORT_COLUMN_ADHOC</ns1:name>
<ns1:values>
<ns1:item>09-NOV-2009 07:02:00|11-NOV-2009 07:02:00|2077927020;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;||||||S|B</ns1:item>
</ns1:values>
</ns1:reportParameters>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportSet>false</ns1:reportSet>
<ns1:reportURL>/Navada/Normal/Adhoc report/Adhoc report.xdo</ns1:reportURL>
<ns1:runType>Run Once Only</ns1:runType>
<ns1:scheduleDescription xsi:nil="true"/>
<ns1:scheduleParameters xsi:nil="true"/>
<ns1:startDate>2009-11-23T06:03:10.000Z</ns1:startDate>
<ns1:status>Unknown</ns1:status>
<ns1:username>administrator</ns1:username>
</getScheduledReportInfoReturn>
<getScheduledReportInfoReturn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns2:JobInfo" xmlns:ns2="http://xmlns.oracle.com/oxp/service/PublicReportService">
<ns2:burstingOption>false</ns2:burstingOption>
<ns2:createdDate>2009-11-20T13:00:44.000Z</ns2:createdDate>
<ns2:deliveryDescription xsi:nil="true"/>
<ns2:deliveryParameters xsi:nil="true"/>
<ns2:endDate xsi:nil="true"/>
<ns2:jobGroup>administrator</ns2:jobGroup>
<ns2:jobID>365</ns2:jobID>
<ns2:jobName>603219960-ADMIN-test again</ns2:jobName>
<ns2:locale>en_GB</ns2:locale>
<ns2:reportName>Adhoc report</ns2:reportName>
<ns2:reportParameters xsi:type="ns2:ParamNameValue">
<ns2:multiValuesAllowed>false</ns2:multiValuesAllowed>
<ns2:name>SORT_COLUMN_ADHOC</ns2:name>
<ns2:values>
<ns2:item>20-SEP-2009 13:55:00|20-NOV-2009 13:55:00|01*;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;||||||S|B</ns2:item>
</ns2:values>
</ns2:reportParameters>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportSet>false</ns2:reportSet>
<ns2:reportURL>/Navada/Normal/Adhoc report/Adhoc report.xdo</ns2:reportURL>
<ns2:runType>Run Once Only</ns2:runType>
<ns2:scheduleDescription xsi:nil="true"/>
<ns2:scheduleParameters xsi:nil="true"/>
<ns2:startDate>2009-11-20T13:00:44.000Z</ns2:startDate>
<ns2:status>Unknown</ns2:status>
<ns2:username>administrator</ns2:username>
</getScheduledReportInfoReturn>
</getScheduledReportInfoResponse>
I use the following query to show a report in top of this response
select extractValue(value(t),'/*/burstingOption','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "burstingOption"
, replace(trim(trailing 'Z' from extractValue(value(t),'/*/createdDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')),'T',' ') "createdDate"
, extractValue(value(t),'/*/deliveryDescription','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "deliveryDescription"
, replace(trim(trailing 'Z' from extractValue(value(t),'/*/endDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')),'T',' ') "endDate"
,replace(replace(substr(extractValue(value(t),'/*/endDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,1,(instr(extractValue(value(t),'/*/endDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,'.')-1)),'T',' '),':','-') "endDate1"
, extractValue(value(t),'/*/jobGroup','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "jobGroup"
, to_number(extractValue(value(t),'/*/jobID','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')) "jobID"
, extractValue(value(t),'/*/jobName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "jobName"
, substr(extractValue(value(t),'/*/jobName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,(instr(extractValue(value(t),'/*/jobName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,'-')+1)) "jobName1"
, extractValue(value(t),'/*/locale','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "locale"
, extractValue(value(t),'/*/reportName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "reportName"
, extractValue(value(t),'/*/reportSet','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "reportSet"
, extractValue(value(t),'/*/reportURL','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "reportURL"
, extractValue(value(t),'/*/runType','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "runType"
, extractValue(value(t),'/*/scheduleDescription','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "scheduleDescription"
, extractValue(value(t),'/*/scheduleParameters','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "scheduleParameters"
, replace(trim(trailing 'Z' from extractValue(value(t),'/*/startDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')),'T',' ') "startDate"
, extractValue(value(t),'/*/status','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "status"
, extractValue(value(t),'/*/username','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "username"
from wwv_flow_collections c, table(xmlsequence(extract(xmltype.createxml(c.clob001),'//getScheduledReportInfoResponse/getScheduledReportInfoReturn','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"'))) t
where c.collection_name = 'SCHEDULED_JOB_REPORT'
Regards,
Vishal

Web service error handling (SOAP 1023 SRT: ICM_HTTP_CONNECTION_FAILED)

Hi there,
When consuimng our web service, sometimes we get the error "SOAP 1023 SRT: Processing error when receiving the response: ICM_HTTP_CONNECTION_FAILED" and this happens when we can't connect to the other system. The requirement is to automatically resend the transaction after +/- 10 seconds. Is there somewhere on the web service settings that will enable us to achieve this without having a background job running every minute?
Thanks.

<p>Hello,</p>
<p> </p>
<p>The first thing you should do is to check that your application server can reach the service your are trying to call. I suggest to try a:</p>
<p> </p>
<p>telnet <remote_service_url> <remote_service_port></p>
<p> </p>
<p>from the command line of your server.</p>
<p> </p>
<p>You should get a blank screen if your server reaches the remote server and something like connecting to <remote_service_url> if you don't.</p>
<p> </p>
<p>Yours,</p>
<p> </p>
<p>Joseba M. Iturbe</p>

Name and Directory Service (Soap, Rest)

Hello everyone,
i would like to implement a directory service for Web-services (like UDDI) that supports SOAP and Rest. My question is can i use JNDI to do that. When yes, muss I write a Plug in for JNDI SPI to support this Protocols(SOAP, Rest). When no, what would you recommend me.
Thank you very much
Rodolfo

oops,thought i was replying to the PgP question:)
I think you should be able to achieve this via adapter module but i m not really sure how exactly it will be done .
Thanks
Aamir
Edited by: Aamir Suhail on Jul 28, 2009 1:42 PM

Diff b/w Web service and window service

What is the difference between web service and window service, whether the both are same or not, Give some explain about that each one and give some examples also.

An XML Web service is a component that implements program
logic and provides functionality for diseparate
applications. These applications use standard protocols,
such as HTTP, XML, and SOAP, to access the functionality.
XML Web services use XML-based messaging to send and
receive data, which enables heterogeneous applications to
interoperate with each other. You can use XML Web services
to integrate applications that are written in different
programming languages and deployed on different platforms.
In addition, you can deploy XML Web services within an
intranet as well as on the Internet. While the Internet
brings users closer to organizations, XML Web services
allow organizations to integrate their applications.
A Windows service starts much before any user logs in to
the system (if it has been setup to start at boot up
process). A Windows service can also be setup in such a way
that it requires a user to start it manually ? the ultimate
customization!
Windows services run as background processes. These
applications do not have a user interface, which makes them
ideal for tasks that do not require any user interaction.
You can install a Windows service on any server or computer
that is running Windows 2000, Windows XP, or Windows NT.
You can also specify a Windows service to run in the
security context of a specific user account that is
different from the logged on user account or the default
computer account. For example, you can create a Windows
service to monitor performance counter data and react to
threshold values in a database.

Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?

Hi,
when method execute_asynchronous has disapeared since XI/PI 7.1, is
there still way how to use ABAP proxy in asynchronous way?
We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
In PI, both interfaces are defined as asynchronous (outbound for SOAP and
inbound for ABAP Proxy).
Despite of this fact, when message is sent, it is processed
synchronous way.
I have set breakpoint in my implementation of method for ABAP Proxy
message processing. When message is sent and breakpoint is reached,
whole connection stays open (between SOAP and PI and between PI and
ABAP Proxy) and waits for processing method (the breakpointed one) to
return. Only when processing method returns, is connection finelly
closed.
If i understand it correctly, this is synchronous behavior. In
asynchronous behavior, as i understand it, should be connection
between PI and ABAP Proxy of application server closed immediately
after message has been delivered. This mean before my processing
method is even called.
The same could be said about SOAP and PI communication. Connection
should be closed immediately after PI has received message. From
definition of asynchronous communication of PI is obvious, that PI
should receive message correctly and close connection to sender system
even when receiver is unreachable. It should deliver message later
when, receiver system is back on line. So why it keeps connection to
sender system open while it waits for receiver?
Why is this happening, when both interfaces are defined as
asynchronous? Could be the reason for this, if APPLICATION
ACKNOWLEDGEMENT is set on by default? If so, how can i change it
to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
Or is this kind of asynchronous communication even possible since
XI/PI 7.1 ?
Processing of message we are sending can take some time, so we dont
want connection pending open while waiting for finish of
processing. Thats the reason why we have chose asynchronous model to
use.

Quote from How to Use the J2EE SOAP Adapter:
"If you select Best Effort, the Web service client will receive a response
message in the SOAP body. Otherwise, the Web service client will not receive a
response message if no error occurs."
"if no error occurs" - that is the problem. In either case he still
waits if some error occure or not. I dont want it. Once PI has
received message, I want the connection with sender to be closed. If
there will be error in communication between PI and reciever, I want
to see it only in PI log. That mean no notification to sender to be
send about that error.
Is that possible?

RPC/SOAP-Encoded Web Service with Workshop

Is there anyway to create a RPC/SOAP-Encoded Web Service with Workshop ? There is an "encoding" attribute in the autotype ant task but no corresponding properties in Workshop.

Hi,
Thanks for the reference.
I have checked both in the wsdl and the Soap message,
rpc property effectively means rpc/encoded. Now that
would say that RPC/Literal is not supported ?
Here are what the messages looks like with rpc and
document properties
Thanks all for making this clear.
document wlw property = Document/Literal
<SOAP-ENV:Envelope xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<ns:getEmployeeResponse xmlns:ns="http://www.openuri.org/">
<ns:getEmployeeResult xmlns:ns="http://www.openuri.org/">
<ns:Address xmlns:ns="http://www.openuri.org/">
<ns:City xmlns:ns="http://www.openuri.org/">Luxembourg</ns:City>
<ns:Country xmlns:ns="http://www.openuri.org/">LU</ns:Country>
<ns:Number xmlns:ns="http://www.openuri.org/">2</ns:Number>
<ns:PostCode xmlns:ns="http://www.openuri.org/">1000</ns:PostCode>
<ns:Street xmlns:ns="http://www.openuri.org/">Bld. Royal</ns:Street>
</ns:Address>
<ns:Age xmlns:ns="http://www.openuri.org/">20</ns:Age>
<ns:Name xmlns:ns="http://www.openuri.org/">Dupont</ns:Name>
<ns:FirstNames xmlns:ns="http://www.openuri.org/">
<ns:String xmlns:ns="http://www.openuri.org/">Jean</ns:String>
<ns:String xmlns:ns="http://www.openuri.org/">Jacques</ns:String>
</ns:FirstNames>
</ns:getEmployeeResult>
</ns:getEmployeeResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
rpc wlw property = RPC/Soap-Encoded
<SOAP-ENV:Envelope xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<ns:getEmployeeResponse xmlns:ns="http://www.openuri.org/">
<getEmployeeResult xmlns:s="http://www.openuri.org/encodedTypes" xsi:type="s:Employee">
<Address xsi:type="s:Address">
<City xsi:type="xsd:string">Luxembourg</City>
<Country xsi:type="xsd:string">LU</Country>
<Number xsi:type="xsd:int">2</Number>
<PostCode xsi:type="xsd:string">1000</PostCode>
<Street xsi:type="xsd:string">Bld. Royal</Street>
</Address>
<Age xsi:type="xsd:int">20</Age>
<Name xsi:type="xsd:string">Dupont</Name>
<FirstNames SOAP-ENC:arrayType="xsd:string[2]" xsi:type="SOAP-ENC:Array">
<String xsi:type="xsd:string">Jean</String>
<String xsi:type="xsd:string">Jacques</String>
</FirstNames>
</getEmployeeResult>
</ns:getEmployeeResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Message was edited by phcollignon at Aug 27, 2004 2:54 AM

SOAP and J2EE security

We have deployed several SOAP services (Apache SOAP) on a WLS6.1
server. Since there are more and more services are being deployed
people are getting worried about security. I was wondering what the
best solution was to to authentication and authorization on EJB and
method level for SOAP clients ? I was thinking about the following
solution: use the standard J2EE security by defining security
constrainst in the ejb-jar.xml file. Therefor every client needs to
provide credentials to use the EJB's (this should work for both
RMI/IIOP and SOAP clients).
What are your ideas and opinions about this solution ?
If you post a reply please CC to [email protected]

Hi,
Let me know if you find answer of your question.
thanks

OSB- Any Soap type Proxy service URL issue.

Hi,
There is an issue which i am facing and stuggling with it for sometime :(
Requirement - Using OSB 11g i had created 12 different services based on WSDLs provided by the client and all of them are working fine.However the client wanted a OSB router service on top of these 12 services which wil search for a string in the input xml and then route it to the required Proxy service (amongst the 12 services developed).
Problem- I was able to create the router Proxy service which was a Any Soap type of proxy service as i didnot have a WSDL for the router service.The router service is working fine when we test it from the OSB console.
When We tried to test the flow from SOAPUI (we used the WSDL of one of the 12 webservices developed and modified the uri to the uri of the router service ie. http://hostname:port/router/routerProxy) and it does not work.
The error returned is ERROR 404 nothing found by this name.
As The router proxy is a Any Soap kind of service i do not have the option of providing the client with the WSDL.
I would want to know how to i call this router service from an external source like SOAPUI so that the client is able to hit it.Also what would be the end point uri of this router service ?
Kindly Help
Thanks
Pranav Shah

Hi anuj,
Here you have the configuration
<?xml version="1.0" encoding="UTF-8"?>
<xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/transform/config">
<ser:coreEntry isProxy="true" isEnabled="false" isAutoPublish="false" isTracingEnabled="false">
<ser:description/>
<ser:binding type="abstract SOAP" xsi:type="con:AnySoapBindingType" isSoap12="false" xmlns:con="http://www.bea.com/wli/sb/services/bindings/config"/>
<ser:monitoring isEnabled="false">
<ser:aggregationInterval>10</ser:aggregationInterval>
<ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
</ser:monitoring>
<ser:reporting>true</ser:reporting>
<ser:logging isEnabled="true">
<ser:logLevel>debug</ser:logLevel>
</ser:logging>
<ser:sla-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:sla-alerting>
<ser:pipeline-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:pipeline-alerting>
<ser:ws-policy>
<ser:binding-mode>service-policy-bindings</ser:binding-mode>
<ser:policies/>
</ser:ws-policy>
<ser:throttling enabled="false">
<ser:capacity>0</ser:capacity>
<ser:maxQueueLength>0</ser:maxQueueLength>
<ser:timeToLive>0</ser:timeToLive>
</ser:throttling>
<ser:messageTracing enabled="false">
<ser:detailsLevel>Terse</ser:detailsLevel>
<ser:maxSize>8192</ser:maxSize>
</ser:messageTracing>
<ser:pageAttachments isEnabled="false"/>
<ser:transactions isRequired="false" sameTxForResponse="false"/>
</ser:coreEntry>
<ser:endpointConfig>
<tran:provider-id>http</tran:provider-id>
<tran:inbound>true</tran:inbound>
<tran:URI>
<env:value>/testRouter/test</env:value>
</tran:URI>
<tran:inbound-properties/>
<tran:all-headers>true</tran:all-headers>
<tran:provider-specific xsi:type="http:HttpEndPointConfiguration" xmlns:http="http://www.bea.com/wli/sb/transports/http">
<http:inbound-properties/>
</tran:provider-specific>
</ser:endpointConfig>
<ser:router>
<con:flow>
<con:route-node name="RouteNode1">
<con:context/>
<con:actions>
<con3:ifThenElse>
<con2:id>_ActionId-9110389481588294027-8fc6726.12c833ed7e1.-7c90</con2:id>
<con3:case>
<con3:condition>
<con:xqueryText xmlns:con="http://www.bea.com/wli/sb/stages/config">fn:contains(fn-bea:serialize($body), 'ImsersoSiebelContactInsert')</con:xqueryText>
</con3:condition>
<con3:actions>
<con1:route>
<con2:id>_ActionId-9110389481588294027-8fc6726.12c833ed7e1.-7c8f</con2:id>
<con1:service ref="ServiWebEntrada/AltaExpediente/ProxyService/AltaExpedienteProxyService" xsi:type="ref:ProxyRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
<con1:operation>ImsersoSiebelContactInsert</con1:operation>
<con1:outboundTransform/>
<con1:responseTransform/>
</con1:route>
</con3:actions>
</con3:case>
<con3:case>
<con3:condition>
<con:xqueryText xmlns:con="http://www.bea.com/wli/sb/stages/config">fn:contains(fn-bea:serialize($body), 'CreaContacto')</con:xqueryText>
</con3:condition>
<con3:actions>
<con1:route>
<con2:id>_ActionId-9110389481588294027-8fc6726.12c833ed7e1.-7c8b</con2:id>
<con1:service ref="ServiWebEntrada/CuidContact/ProxyService/CuidContactProxyService" xsi:type="ref:ProxyRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
<con1:operation>CreaContacto</con1:operation>
<con1:outboundTransform/>
<con1:responseTransform/>
</con1:route>
</con3:actions>
</con3:case>
</con3:ifThenElse>
</con:actions>
</con:route-node>
</con:flow>
</ser:router>
</xml-fragment>
Regards
Pranav

Enterprise services and Web services

Hi Everyone
I need documents about Invoking enterprise services from Netweaver PI and web services from Netweaver PI, I can find only NetWeaver CE, but not PI. So help, any links?? or pdfs?? or ideal would be some demo example of invoking a web service using PI.
Thank you
Vijay

Hi,
Since you would need to wet your hands by playing with webservice and PI. Please consider the following links.
SOAP scenario
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
https://weblogs.sdn.sap.com/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken]
https://weblogs.sdn.sap.com/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://weblogs.sdn.sap.com/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken]
Regards
joel
Edited by: joel trinidade on Mar 25, 2009 10:41 AM
Edited by: joel trinidade on Mar 25, 2009 10:43 AM

I can not publish and query services in Registry Server?Help please!

I want to use Registry Server in Jwsdp1.5 to publish and query services,but there is some problems:
2006-4-26 10:05:26 com.sun.registry_server.server.RegistryServerServlet init
��: NamingException: javax.naming.NameNotFoundException: Name org.xml.sax.driver is not bound in this Context
2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl identifyContentType
��: SAAJ0537: �� SOAP ��
2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl <init>
��: SAAJ0535: ��
javax.xml.registry.JAXRException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at com.sun.xml.registry.uddi.RegistryServiceImpl.jaxmSend(Unknown Source)
     at com.sun.xml.registry.uddi.RegistryServiceImpl.send(Unknown Source)
     at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
     at com.sun.xml.registry.uddi.UDDIMapper.findOrganizations(Unknown Source)
     at com.sun.xml.registry.uddi.BusinessQueryManagerImpl.findOrganizations(Unknown Source)
     at QueryByName.doPost(QueryByName.java:63)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:127)
     ... 34 more
Caused by: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
     ... 34 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:231)
     at com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl.<init>(Message1_1Impl.java:43)
     at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl.createMessage(SOAPMessageFactory1_1Impl.java:32)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:354)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
     ... 36 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Invalid Content-Type:text/html. Is this an error message instead of a SOAP response?
     at com.sun.xml.messaging.saaj.soap.MessageImpl.identifyContentType(MessageImpl.java:295)
     at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:146)
     ... 40 more
can you help me?expectiong your advise!thank you

I have created my own private registry, I hava installed JWSDP1.5.
I use a .jsp file and a servlet to publish services,the servlet is:
import javax.xml.registry.*;
import javax.xml.registry.infomodel.*;
import java.net.*;
import java.security.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Publish extends HttpServlet{
     public void doGet(HttpServletRequest request,HttpServletResponse response)
     throws ServletException,IOException{
          doPost(request,response);
     public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException{
     String userName=request.getParameter("username");
     String authPassword=request.getParameter("password");
     Connection connection = null;
RegistryService rs=null;
BusinessLifeCycleManager blcm=null;
BusinessQueryManager bqm = null;
     Properties props=new Properties();
props.setProperty("javax.xml.registry.queryManagerURL","http://localhost:8080/RegistryServer");
props.setProperty("javax.xml.registry.lifeCycleManagerURL","http://localhost:8080/RegistryServer");
props.setProperty("javax.xml.registry.factoryClass","com.sun.xml.registry.uddi.ConnectionFactoryImpl");
//props.setProperty("com.sun.xml.registry.http.proxyHost",httpHost);
//props.setProperty("com.sun.xml.registry.http.proxyPort",httpPort);
// props.setProperty("com.sun.xml.registry.https.proxyHost",httpsHost);
// props.setProperty("com.sun.xml.registry.https.proxyPort",httpsPort);
try{
// Create the connection, passing it the
// configuration properties
ConnectionFactory factory =
ConnectionFactory.newInstance();
factory.setProperties(props);
connection=factory.createConnection();
PrintWriter out=response.getWriter();
out.println("<a href=\"/publishapp/publish.jsp\">You can click here to be Back </a>");
out.println("<H3>Created connection to registry</H3>");
rs=connection.getRegistryService();
blcm = rs.getBusinessLifeCycleManager();
bqm = rs.getBusinessQueryManager();
//out.println("Got registry service, query " +"manager, and life cycle manager");
// Get authorization from the registry
PasswordAuthentication passwdAuth =
new PasswordAuthentication(userName,authPassword.toCharArray());
Set creds = new HashSet();
creds.add(passwdAuth);
connection.setCredentials(creds);
out.println("<br>");
out.println("<H3>Established security credentials</H3>");
//receive organization name and description
String orgName=request.getParameter("orgname");
String orgDescription=request.getParameter("orgdescription");
// Create organization name and description
Organization org =
blcm.createOrganization(orgName);
InternationalString s =
blcm.createInternationalString(orgDescription);
org.setDescription(s);
//receive contactor name phone and Email
String contactName=request.getParameter("contactname");
String contactPhone=request.getParameter("contactphone");
String contactEmail=request.getParameter("contactemail");
// Create primary contact, set name
User primaryContact = blcm.createUser();
PersonName pName =
blcm.createPersonName(contactName);
primaryContact.setPersonName(pName);
// Set primary contact phone number
TelephoneNumber tNum = blcm.createTelephoneNumber();
tNum.setNumber(contactPhone);
Collection phoneNums = new ArrayList();
phoneNums.add(tNum);
primaryContact.setTelephoneNumbers(phoneNums);
// Set primary contact email address
EmailAddress emailAddress =blcm.createEmailAddress(contactEmail);
Collection emailAddresses = new ArrayList();
emailAddresses.add(emailAddress);
primaryContact.setEmailAddresses(emailAddresses);
// Set primary contact for organization
org.setPrimaryContact(primaryContact);
String serviceName=request.getParameter("servicename");
String serviceDescription=request.getParameter("servicedescription");
String serviceURL=request.getParameter("serviceurl");
String svcbindDescription=request.getParameter("svcbinddescription");
// Create services and service
Collection services = new ArrayList();
Service service =
blcm.createService(serviceName);
InternationalString is =
blcm.createInternationalString(serviceDescription);
service.setDescription(is);
// Create service bindings
Collection serviceBindings = new ArrayList();
ServiceBinding binding = blcm.createServiceBinding();
is = blcm.createInternationalString(svcbindDescription);
binding.setDescription(is);
// allow us to publish a fictitious URL without an error
binding.setValidateURI(false);
binding.setAccessURI(serviceURL);
serviceBindings.add(binding);
// Add service bindings to service
service.addServiceBindings(serviceBindings);
// Add service to services, then add services to organization
services.add(service);
org.addServices(services);
//receive Classification scheme name and value
String classificationScheme=request.getParameter("classificationscheme");
String classificationName=request.getParameter("classificationname");
String classificationValue=request.getParameter("classificationvalue");
// Set classification scheme to NAICS
ClassificationScheme cScheme =
bqm.findClassificationSchemeByName(null, classificationScheme);
// Create and add classification
Classification classification = blcm.createClassification(cScheme,
classificationName,classificationValue);
Collection classifications = new ArrayList();
classifications.add(classification);
org.addClassifications(classifications);
// Add organization and submit to registry
// Retrieve key if successful
Collection orgs = new ArrayList();
orgs.add(org);
BulkResponse response1 = blcm.saveOrganizations(orgs);
Collection exceptions = response1.getExceptions();
if (exceptions == null) {
out.println("<br>");
out.println("<H3>Service Registering is Sucessful!</H3>");
out.println("<br>");
out.println("<H3>service information saved is</H3>");
out.println("<H3>");
out.println(orgName);
out.println("</H3>");
Collection keys = response1.getCollection();
Iterator keyIter = keys.iterator();
if (keyIter.hasNext()) {
javax.xml.registry.infomodel.Key orgKey =
(javax.xml.registry.infomodel.Key) keyIter.next();
String id = orgKey.getId();
out.println("<H3>service key is </H3>");
out.println("<H3>");
out.println(id);
out.println("</H3>");
} else {
Iterator excIter = exceptions.iterator();
Exception exception = null;
while (excIter.hasNext()) {
exception = (Exception) excIter.next();
System.err.println("Exception on save: " +
exception.toString());
} catch (Exception e) {
e.printStackTrace();}
the exception in the tomcat50-jwsdp/logs:
javax.xml.registry.JAXRException: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
     at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
     at com.sun.xml.registry.uddi.UDDIMapper.getAuthorizationToken(Unknown Source)
     at com.sun.xml.registry.uddi.ConnectionImpl.setCredentials(Unknown Source)
     at Publish.doPost(Publish.java:66)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
     at com.sun.xml.registry.common.util.MarshallerUtil.jaxbMarshalObject(Unknown Source)
     ... 32 more
expecting yours advise, thanks!!

Could someone help me to clearly distinguish between SOAP and HTTP adapter?

In which scenarios we can go for HTTP adapter and when to go for SOAP adapter?

Hi Lekshmi !!
A SOAP message will be bundled inside the soap envelope.HTTP is not an adapter in adapter engine whereas soap is an adapter i.e, HTTP doesn't require a communication channel where as SOAP requires.You can send soap messages using some SOAP client.
SOAP Adapter is used to xchange SOAP messages bw remote clients and webservices....
check this link for more differences..
SOAP and HTTP adapter
When you need to Send Data to XI from a Webservice , your SOAP adapter is used.
HTTP adapter is used when you want to post a HTTP request message from a web application to XI.
How can i make use of SOAP Sender Adapter without using any tools like XML Spy etc....
XML SPy is used as a TEST tool when you are sending SOAP information to XI. TO actually send data , you need to configure a webservice and construct a SOAP request message and post the data .
we use SOAP adapter when we need to connect to remote system or use Webservices in these cases we use SOAP adapter.
HTTP Adapter is used by extenal systems to connect to Intergartin server using native HTTP Interface.
the http adapter is a service which is directly connected to integration engine. Adapter Framework (Java) isnt involved. It is much more performant than SOAP adapter.
The SOAP adapter is written in Java and is responsible for the SOAP envelope around the real XML message. You can build/remove that envelope as well in the mapping and use instead http adapter. But standard for webservices is using SOAP adapter.
Check this thread....
Difference between SOAP and Http Sender
HTTP Adatpter Vs Soap Adapter
HTPP Adatpter Vs Soap Adapter ????
Difference between SOAP and Http Sender
Difference between SOAP and Http Sender
Plain HTTP Adapter vs SOAP Adapter with regards to SSL
Plain HTTP Adapter vs SOAP Adapter with regards to SSL
Hope it clears your doubt !!!!
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>
Thanks,
Abhishek Agrahari

SOAP and Webservice

Hi all,
i am new to java..!! so can someone pls help me..its urgent?
i want to create a agent which will read the content sent through SOAP and create an XML file and send it through web service. Can anyone help me in this regard..?
P.S :- sorry if i am repeating this question as many of them wud have already asked this..i was not able to find anythin to match my requirement.
thanks
bala

i was not able
to find anythin to match my requirement.What you're asking is so common that I find it difficult to believe your search would come up empty. A quick google search of "java web services" returns more information than you will ever need. First link that pops up:
java.sun.com/webservices/
Good luck.

SOAP and SRT services

Similar Messages

Maybe you are looking for