SOAP receiver message failure

Hi,
Scenario is an async message from SAP to a third party (SOAP receiver)
This message staus is delivered in adapter logs of RWB.
Also there is the payload (before mapping and after mappings till technical routing also) can be seen from sxmb_moni.
Thre problem is that the message data is not uploaded to that third party.
The communication channel is having correct URL (tried with WSDL home page and URL pointing to WSDL file/code like with '?WSDL' ) and SOAP action is also provided (also tried without SOAP action and got an error related to SOAP action).
These are the only 2 places (target URL & SOAP action) are maintained in communication channel. There is no any proxy/authentication required.
What cld be the reason of this ?
The TP web service is working fine with soapUI.
Regards,
Sachchidanand

Hi Kulwant,
Thanks for ur help.
In sxmb_moni, message status is successful.
As ur suggestion I just checked with soapUI message structure and found that..
1. soapUI tool message structure contains empty header <soapenv:Header/> and in the <soapenv:Body> all the wsdl fields/heirarchy is there.
2. In sxmb_moni payload (@ tech routing) there is no any header , it shows the structure like its in <soapenv:Body> of soapUI or its like message mapping heirarchy.
And there is no any custom authentication part visible in soapUI also.
Thanks,
Sachchidanand

Similar Messages

Erro SOAP Receiver: handshake failure

Pessoal, boa tarde.
Tenho um Canal de Comunicação SOAP Receiver, com autenticação por usuário e senha.
Ao enviar a requisição para o Channel, é gerado o seguinte erro:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.RecoverableException: Peer sent alert: Alert Fatal: handshake failure: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
mencionando problema de handshake.
No log Java, encontrei as seguintes mensagens:
p.aii.af.soapadapter#co
ssl_debug(6603): Sending v3 client_hello message, requesting version 3.1...
ssl_debug(6603): Received v3 server_hello handshake message.
ssl_debug(6603): Server selected SSL version 3.1.
ssl_debug(6603): Server created new session CA:23:B4:0E:C7:16:0A:8F...
ssl_debug(6603): CipherSuite selected by server: TLS_RSA_WITH_AES_256_CBC_SHA
ssl_debug(6603): CompressionMethod selected by server: NULL
ssl_debug(6603): Received certificate handshake message with server certificate.
ssl_debug(6603): Server sent a 1024 bit RSA certificate, chain has 1 elements.
ssl_debug(6603): ChainVerifier: No trusted certificate found, OK anyway.
ssl_debug(6603): Received server_hello_done handshake message.
ssl_debug(6603): Sending client_key_exchange handshake message (1024 bit)...
ssl_debug(6603): Sending change_cipher_spec message...
ssl_debug(6603): Sending finished message...
ssl_debug(6603): Received alert message: Alert Fatal: handshake failure
ssl_debug(6603): SSLException while handshaking: Peer sent alert: Alert Fatal: handshake failure
ssl_debug(6603): Shutting down SSL layer...
Alguém já viu este erro e teria alguma informação a respeito?
Desde já agradeço.
Pedro Baroni

Carlos,
Em nosso cenário não utilizamos Certificado, porém em contato com o Fornecedor dos WebServices, identificamos o problema na aplicação dele, pois haviam configurado para somente aceitar conexões com Certificado. Porém o problema já foi corrigido na aplicação dele e a Interface voltou a funcionar.
Obrigado.

Syncronous SOAP Receiver Message: APPLICATION_ERROR

Hi Experts,
I am facing a application error in SXMB_MONI for syncronous messages in a SOAP receiver scenario.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In RWB the SOAP adapter shows me that the message was delivery successfully however the guys from the third party application said to me that the message didn't reach it.
I would like to know if you have any idea where the error is.
Have you already faced something like this?
<< Moderator message - Please do not offer points >>
Thanks in advance,
Daniela
Edited by: Rob Burbank on Oct 15, 2010 4:42 PM

Hello,
Based on the exception, this is really not as descriptive as possible. Can you try the following:
1. Execute the WSDL via SOAP UI and let us know of the results.
2. Under SXI_MONITOR, can you double click the response message payload? The response message payload should more or less give an idea as to why this error occurred.
Hope this helps,

SOAP receiver - Message level security - Encryption

Hello,
I want to use message level security when using HTTPS. Client provided us the encryption certificate which we have uploaded in the keystore, also done the necessary settings in PI 7.1 but we are getting the below mentioned error.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: apply( Message, CPALookupObject ). Message: SecurityException in method: apply( Message, CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: Connection timed out: connect. To-String: java.net.ConnectException: Connection timed out: connect; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: Connection timed out: connect. To-String: java.net.ConnectException: Connection timed out: connect. To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: apply( Message, CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: Connection timed out: connect. To-String: java.net.ConnectException: Connection timed out: connect; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: Connection timed out: connect. To-String: java.net.ConnectException: Connection timed out: connect
Thanks & Regards,
Rahul Nawale

I agree
Try executing a Full CPA Cache refresh.

Message failure notices about emails I haven't sent

Starting yesterday, I began receiving message failure emails in by inbox and junkfolder about emails that I didn't send. When I got the first message, it seemed apparent that I was hacked, so I quickly changed my email password. Since then, the failure
notices have continued so I changed my password one more time. Again, the emails have continued. It appears that the emails from my email address are being sent all over the world... Australia, Germany... etc. I've emailed Outlook to ask them their advice.
Any thoughts that anyone has on what more I can do would be appreciated. Thanks so much.

Hi Friend,
Generally, this kind of problem occurs due to the virus/malware attack on a computer or Outlook. Scan your whole computer with Antivirus program and contact with your ISP (Internet Service Provider) coordinator to fix this issue either it can create a big
trouble for your PC.
This link can help you to get overcome from the viruses attack on your Outlook:
http://email.about.com/od/spamfightingtips/qt/Ignore_Delivery_Failures_of_Messages_You_Did_Not_Send.htm
Thanks
Clark Kent

Message mapping: SOAP Receiver to IDOC Sender

hi,
i have an idoc sent to SOAP receiver. SOAP Response will have only the "Status code" and the "Reason of failure".
IDOC Sender will have the PO Number and the Vendor Name to which we are sending.
The SOAP Response will not have the PO Number and the Vendor Name.
How can i have the Reason of failure, PO Number and Vendor in one message type?
Thanks in advance,
Tirumal

Praveen -
Thanks for the response and appreciate your observation.
Very tight deadlines with the client and have to finish lot of tasks in short time so putting hands in everything.
There are lot of vendors who run their proprietary web services. So cannot change their stuff.
How would i map the SOAP request to the SOAP Response since some information is in one message type and other half of information available in other message type.
I created a SOAP Response Type with the "Reason Code" information.
I created another message type with all the information that i want.
How would i map the SOAP Request to the SOAP Response msg type and the other message type.
Let me know.
Thanks in advance,
Tirumal

BPM: System_Error" SOAP fault message received

Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
Mrudula

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE.

Soap Receiver Adapter - No Response Message

Hi, I've got the following scenario: Idoc - XI - Webservice. I've imported the WSDL from the .NET webservice and used the input and output messages in a syncronous interface. I've setup a SOAP Receiver adapter with the Webservice details. Everything is working fine when I call the webservice and the data is received 100% at the target system, but I am not getting ANY response back on XI.
RECEIVER SOAP ADAPTER Audit LOG:
2008-01-24 16:41:57 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-01-24 16:41:57 Success MP_LEAVE1
2008-01-24 16:41:57 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2008-01-24 16:41:57 Success Acknowledgement creation triggered for type: AckNotSupported
2008-01-24 16:41:57 Success SOAP: completed the processing
2008-01-24 16:41:57 Success SOAP: continuing to response message 83638fb0-ca8a-11dc-b36c-00145eed9500
2008-01-24 16:41:57 Success SOAP: sending a delivery ack ...
2008-01-24 16:41:57 Success SOAP: sent a delivery ack
2008-01-24 16:41:57 Success The message status set to DLVD.
2008-01-24 16:41:57 Success Acknowledgement sent successfully for type: AckNotSupported
Has it got anything to do with the "AckNotSupported" type? Is "AckNotSupported" the default setting for the receiver SOAP adapter? If so, where do I change this setting?
When I call the webservice with the exact same input using a standalone tool, I get the response message back 100%. Any help will be appreciated.
Thanks
Rudi

Hey
you are confusing between a response and an acknowledgement.
response and acknowledgement and not one and the same thing.
response is basically used when you send some query to the receiver system and expect a set of value(s) for your query.for e.g sending a query to a Database(JDBC) or SAP system(RFC)
and acknowledgement is just a notification that the message was receiver by the receiver correctly,it does not returns you a set of value(s).
now coming to your question,ALEAUDIT IDOC is generated when an IDOC is posted,since in your case you are not posting and IDOC,instead your are sending it ,i m not sure if ALEAUDIT will be generated or not,one thing that will come to your rescue is that every receiver SOAP adapter expects a HTTP response(irrespective of you explicitly asking it or not).
a HTTP 200 means that messages were posted successfully,and HTTP 500 means application error,get this HTTP response and send it back to the SAP system,most probably you would need to use BPM for this.
Thanx
Aamir
Edited by: Aamir Suhail on Jan 24, 2008 11:26 AM

SOAP receiver adapter message: PI payload in parameter or body

Hi,
We tried to send messages via the following way to an external partner: SAP --> IDoc > XI (7.1)> HTTP(s) --> external partner.
We tried 2 techniques:
1. using a HTTP receiver communication channel with HTTP destination (using certificate).
As the path prefix in the destination, including parameters, exceeds 256 characters, we had to search for another solution
2. using the SOAP receiver communication channel with a target URL (https string) and indicator 'Do not use SOAP envelope' set
When sending the message, the body of the message, the IDoc XML payload doesn't seem to be read by the partner, probably related to the fact that they do not use the right software to do so, as decribed in forum:
SOAP receiver adapter error (SOAP receiver adapter error.)
Is this the right interpretation and is there no other solution than try to append the payload to the parameterlist ?
Regards,
Jan Macken

The partner found a way to read the body correctly

SOAP Receiver Response Message

I have setup the following scenario:
Create PO in EBP --> XI --> Webservice
In the Repository I have set up both the outbound and inbound message interfaces as Synchronous. The interface mapping has been setup to map both the request and response messages.
In the Directory I have set up the SOAP receiver adapter and the receiver/interface determination and receiver agreement for EBP as the sender system and the external webservice as the receiver party/service.
When I create a purchase order in EBP the webservice is called successfully and the PO gets created on the target system. The webservice returns a response message which I am expecting to see via SXMB_MONI but is not currently showing!! Is there some Directory configuration that I am missing?
Any pointers would be appreciated.
Regards
Mark Briggs

Hi Mark,
>>>>n the Repository I have set up both the outbound and inbound message interfaces as Synchronous
is your scenario sync or async?
do the ID config with ID wizzard if you're not sure
if will guide you
if you have a sync scenario you shoudl see and error
if you have no response withint the timeout
do you see that in the calling application or in the XI ?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

IDoc to SOAP Receiver Fault Message Handling?

Hi,
I am working on IDoc to SOAP Scenario (IDoc -> PI -> SOAP). It is in async mode without BPM. This works fine as long as there is no error on the SOAP receiver side. How to handle the falut message raised by the SOAP receiver and send it back the SAP ECC.
Do I need to use ALEAUD IDoc for this? If Yes, how to configure this to handle fault message? Is there any other way of doing it?
Could you please give steps to handle the fault message?
Thank you.
Regards,
Cdr.

Have a look into the below threads -
How to capture SOAPFault in an Async/Sync Scenario without BPM
Acknowledgement Handling in IDoc to SOAP Scenario in PI 7.3

How to read fault message in async soap receiver

Hi experts,
I have an asynchronous scenario IDOC->XI->SOAP.
I've defined a SOAP fault message as part of the Inbound Message Interface.
When an error occurs on the SOAP Server, the error description is returned in the form of the fault message.
E.g.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Client</faultcode>
<faultstring>Cannot find the required parameter [lastName] in request message content.</faultstring>
<detail>
<ns1:com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException xmlns:ns1='http://sap-j2ee-engine/error'>Cannot find the required parameter [lastName] in request message content.</ns1:com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
My question is how do I use this message in XI?
I cannot seem to read this fault message.
Please help.
Thanks.
Ron

> > Fault messages are specially designed for Proxies
> and
> > RFC's only..............ASFAIK Fault messages wont
> > work for SOAP reciever side...
>
> They actually also work with SOAP scenarios.
>
> Your WSDL will contain the fault message and in such
> cases ( if you are using a BPM with exception handler
> ) , in case a fault message is sent back, you will be
> able to access this as well.
>
> Regards
> Bhavesh
Bhavesh,
I'm not using BPM and I'm using a asynchronous mode for invoking the WebService.
My WSDL has fault message defined, and I've assigned this fault message to the "Fault" portion of the Inbound Message Interface.
How can I access my fault message in this case?
Please help
Thanks.
Ron

No Payload in the soap receiver call adapter ?

Hi Guys,
configured Proxy-SOAP Asynchronus process and in the sxmb_moni, i am unable to see the payload under call adapter in sxmb_moni, but i am able to see the payload under RWB in MDT. The message is checked successful in monitor.
I am not understanding why i am unable to see the payload under call adapter in sxmb_moni. I am not getting the data into my receiver system.
Do i need to mention the QOS as EO in the soap url in the soap receiver adapter configuration ?
any help would be really appreciated
Thanks,
srini

Hi,
You can only see the Payload(both with and without transformation) in MONI. message that is handling by adapter can only seen in Adapter Framework using RWB-Message Monitoring or using Communication Channel Monitoring.
Regards,
Farooq.
<b>
Rewards points if you find it usefull.</b>

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

SOAP receiver message failure

Similar Messages

Maybe you are looking for