Message failure notices about emails I haven't sent

Starting yesterday, I began receiving message failure emails in by inbox and junkfolder about emails that I didn't send. When I got the first message, it seemed apparent that I was hacked, so I quickly changed my email password. Since then, the failure
notices have continued so I changed my password one more time. Again, the emails have continued. It appears that the emails from my email address are being sent all over the world... Australia, Germany... etc. I've emailed Outlook to ask them their advice.
Any thoughts that anyone has on what more I can do would be appreciated. Thanks so much.

Hi Friend,
Generally, this kind of problem occurs due to the virus/malware attack on a computer or Outlook. Scan your whole computer with Antivirus program and contact with your ISP (Internet Service Provider) coordinator to fix this issue either it can create a big
trouble for your PC.
This link can help you to get overcome from the viruses attack on your Outlook:
http://email.about.com/od/spamfightingtips/qt/Ignore_Delivery_Failures_of_Messages_You_Did_Not_Send.htm
Thanks
Clark Kent

Similar Messages

  • Failure notice on emails

    further to my telephone call to tech support today regarding receiving failure notice emails from emails sent from south america which i have not emailed, i was advised to change my password which i did & that would sort the problem out. i am still having the same sort of emails....WHY

    Lloydie wrote:
    further to my telephone call to tech support today regarding receiving failure notice emails from emails sent from south america which i have not emailed, i was advised to change my password which i did & that would sort the problem out. i am still having the same sort of emails....WHY
    Hi. Welcome to the forums.
    Your email address has been used by a spammer as the "From" address in their spam run. Any failure messages will automatically be returned to you, as well as some people replying "do not spam" etc/
    You haven't sent them, and no password change is necessary. May I ask why you think they are sent from South America ?
    Some people have had 10s of 1000s of these non delivery reports, and frankly there is actually little the can be done to prevent it.
    The emails typically reduce to a trickle and then stop as the spammer uses another poor persons email address in their next spam run.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • How to distingush delivery failure notices & bad email addresses

    Hello, All:
    Is there a standard for the format(content, subject, headers, etc) of delivery failure notices?
    What would you do if you want to get the bad email address (Undelivery address) from the delivery failure notice? Is there a systematic way to get the bad email address instead of earching for the address string in the email?
    Thanks in advance!

    Hi, the exception SendFailedException only happens when any of the recipient addresses is detected to be invalid by the "Transport" during message submission. It is not exactly the same as the user email does not exists.
    I have tried the SendFailedException and functions you suggested. The transport does not give this exception even though the recipent's address is not valid :(..
    I think the JavaMail code passes the email message to the SMTP server, the SMTP deals with the actually sending. Therefore, JavaMail code can not get its hand on the invalid email addresses.
    Thanks!

  • Failure Notices for Messages I never Sent

    Months ago I sought help here for mysterious outgoing messages I worried were the result of some kind of malware. Most of those who responded did so with ridicule, asserting what we all believe, that Macs have very little vulnerability to such things. I know this, but now I'm getting "failure return notices" every day. Could someone take a look at a long header from one of these and tell me whether this is just some new form of spam or whether I should do something to clean my system. I've tried all the ClamV and McAfee applications but neither found anything. ClamV was unable to connect for an update, though. Anyway, here is the header.
    From: [email protected]
    Date: May 22, 2010 6:38:39 PM EDT
    Subject: failure notice
    To: Pam Wilson <[email protected]>
    X-Apparently-To: [email protected] via 69.147.92.101; Sat, 22 May 2010 15:47:56 -0700
    X-Ymailisg: gqkAvHsWLDvRHw3dbEFwrzaOBZIuWAZEz4wnluSAyZTV6sA6Ie.
    q2VxbTXksR897qCNfIlrZtG9LXOTanHIifk.
    t1YUAFMR8XPw4cJoZgDQc0CBPneqFozqUYBZluQ0yJB9kii.ABiupWCtbpRJL95o5qeiOmGeRGk1fqke
    J7UMbER6lvkd6T88huEfklU2Ig2LevB0EKtyuZd
    Ot9PcLeePlQnEToG0pW8Z9UIIswGBz2bmr4eJK4
    9g7J9DQE25KMdplLQhvjPUYIIXm1aH6vK4KGZw-
    X-Originating-Ip: [68.142.198.207]
    X-Originating-Ip: [68.142.198.207]
    Authentication-Results: mta1023.sbc.mail.mud.yahoo.com from=yahoo.com; domainkeys=pass (ok);
    from=yahoo.com; dkim=neutral (no sig)
    Received: from 69.63.184.110 (EHLO alnwmxc04.att.net) (204.127.224.84) by mta1023.sbc.mail.mud.yahoo.com with SMTP;
    Sat, 22 May 2010 15:47:40 -0700
    Received: from smtp111.sbc.mail.mud.yahoo.com ([68.142.198.207]) by att.net (alnwmxc04)
    with SMTP id <20100522223840a04004en8ee>;
    Sat, 22 May 2010 22:38:40 +0000
    Received: (qmail 47574 invoked for bounce); 22 May 2010 22:38:39 -0000
    Domainkey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Date:From:To:Subject; b=OaAZ+LS7BQhC1K5Jlr6rROJ8mrZWSu0rxUX8kIYu0WlZHF8vRH01NOqxT4wg
    XUPKY1Op8pE1Koac22tZifjPS0+ZxirSW1/
    KhhQjlJTdT6uuVlN9OcDxp4I24oLhHwIAW+ZX/WtDY9w1YSkUB/
    JV6pFViDEXNNHkiQb3YsZsd8E= ;

    The body says that it failed because it did not pass through the recipient server's spam filter. Again, I'm getting these every day and they are all about ViAGGRa and CIALLis and the usual annoying spam stuff. Is this coming from my system? Somehow I have more faith in people here than in the young people I get when I've call YAHOO.
    Here is the complete body of one of the messages, very typical:
    This message was created automatically by mail delivery software.
    A message that you sent has not yet been delivered to one or more of its
    recipients after more than 24 hours on the queue on mail.init.lt.
    The message identifier is: 1OEIZM-0000w9-3S
    The subject of the message is: have a time for bbBuyying viaiqra suoper acctive
    The date of the message is: Tue, 18 May 2010 13:50:31 +0400
    The address to which the message has not yet been delivered is:
    [email protected]
    No action is required on your part. Delivery attempts will continue for
    some time, and this warning may be repeated at intervals if the message
    remains undelivered. Eventually the mail delivery software will give up,
    and when that happens, the message will be returned to you.

  • Mail delivery failure messages for email I have not sent to contacts I do not know.

    I am receiving Mail delivery failure messages for emails I have not sent; they are addressed to contacts I've never heard of, many different. Apparently, this is some kind of spam but I don't know what to do about it.

    There is nothing you can do about it. It will stop at some point.
    http://en.wikipedia.org/wiki/Backscatter_%28email%29

  • Email failure notice

    HI,
    I have an email address that continues to fail, can you let me know why it is failing?  I get the following error:
    550 Access denied (sender blacklisted)
    Please advise as I need to converse with this person……the email address in question is:
    [edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]
    I am able to recieve email but get the following failure notice when I try to email or reply to her email:
    Begin forwarded message:
    From: [email protected] Date: July 29, 2015 at 6:29:26 AM CDT To: **** Subject: Failure Notice
    Sorry, we were unable to deliver your message to the following address. <****>: Remote host said: 550 Access denied (sender blacklisted) [RCPT_TO]
    Thanks,
    Brenda ****
     

    Does this message include an attachment?
    If so, more than likely this message is spam and the attachment is infected with a Windows virus.
    Most returned email error messages from a recipient's incoming mail server if a sent message is not accepted do not include:
    I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out.

  • I attempted several times to update Camera Raw Ver 6.7 to my PS 5 and PS 6 but failure notice was prompt even after 100% message was shown. Can you tell me the reason?

    I attempted several times to update Camera Raw Ver 6.7 to my PS 5 and PS 6 but failure notice was prompt even after 100% complete  message was shown. Can you tell me the reason?
    BR,

    Without proper system information and other technical details like the actual error messages nobody can tell you much.
    Mylenium

  • Why do senders receive a delivery failure notice although messages are being received?

    Why do senders receive a delivery failure notice although messages are being received?

    What you have there is either a jailbroken unit with some crazy custom UI or an eastern knockoff. Give us some photos of the ipad itself, mainly the back and some experts can help.
    If you plug it into iTunes does iTunes even acknowledge that an ipad is connected? If it does then try a restore.
    Failing that, head down to an apple store and see what they can do for you.

  • Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do?

    Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.

    Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…

  • Failure Notice when I reply to email

    I can't figure out what's going on. Email that I"m sending to three people I've emailed before is bouncing. Here's what happened:
    I had sent out one email to 12 people with no problems. Three people replied to me (and only me) with questions. I replied to them directly, sending three separate emails, each one addressed to just the person with the question.
    I just received a "failure notice" email for each of those emails. They didn't go through. Their server did not recognize the email address. I checked the email address I used for each email. They are correct.
    FYI: All three are using different mail servers (Telus, Shaw, Yahoo) All three are using PC's.
    Is Mail doing something weird? I'm the only constant in this equation.
    Sign me "totally perplexed"

    I have a long email and would like to attach a PDF file to my latest response. The PDF is currently in my IBooks.
    I know I can send the PDF in a new/clean email, but the point is that I would like to be able to attach it to the current email. I can insert a photo or a video but there doesnt seem to be a way to insert a PDF file.
    I tried to open the PDF up in a new mail, cut it, then paste it into the existing email, but even that doesn't seem to work - I checked my sent box and there was no attachment on the mail when I tried it that way. The only way around the problem I can think of is to create the new email with the attachment, save it as a draft, go back into the original mail, copy it, go back into drafts and paste the existing text around my attachment - but this is a ridiculous and time-consuming process and not really practical.
    Can anyone kindly advise? I think there will be an easy solution, but I just dont see it yet -

  • Everytime I go abroad I have problems with my iphone in that contacts text me and I dont receive the message or the message land in my email about three weeks later. Some contacts I cant send or receive messages from even though I could before Any Ideas?

    Hi,
    Everytime I go abroad I have problems with my contacts, some people send me messages and I dont receive them. I sent them messages and they are not received either. Their phones and mine show them as sent, but they are never received. Sometimes the text messages sent to arrive in my email about three weeks later. Any ideas how I can resolve this and get back to messaging my friends as normal?
    Thanks T

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • HT4623 WAhen I opened my email (WAhen I opened my email (ymail) there were over 30 failure notices for  I never sent. Any ideas why?) there were over 30 failure notices for  I never sent. Any ideas why?

    When I opened my email (ymail) there were over 30 failure notices for  I never sent. Any ideas why?

    Spammers have probably hacked your mail account. Change the password, to something much harder than it was before and see if it happens again. If it does then you may need to talk to the provider or take more aggressive action.
    Usually they hack, send spam and  move on.

  • Delivery Failure Notice

    When I send an email with an attachment I just all of a sudden started receiving a Delivery Failure Notice. Have sent emails just like these numerous times with no problem. I can send them an email that only has text but every time I try to send 1 with
    an attachment I get this message saying Delivery Failure Notice. 

    Roxie,
    an email that you send goes from your computer, to your email service, to your recipient's email service, to your recipient.  The message could be rejected either by your email server or by the recipient's email server.
    It is quite possible that "all of the sudden" this happened because you're now emailing a person who has a particluar email service which doesn't allow larger attachments.  
    I highly recommend using a cloud storage service like skydrive or dropbox.  Instead of emailing the attachment, you can post the file you want to send them to your cloud storage service and then send them a link so they can download it themselves.  Check
    out www.skydrive.com for more info.
    Thanks,
    MIke
    Below is standard text I post for off topic posts:
    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is a standard response I’ve written up in advance to help many people (thousands, really.)
    who post their question in this forum in error, but please don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
    of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks, Mike
    MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

  • Can 2 people in different locations at the same time import, access, send, and receive the same messages from the same email account

    I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
    So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
    Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?

    I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
    The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
    IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
    Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
    Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

  • Sending job error message to admin by email

    Hi everyone...
    Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
    Is there a better way?
    Cheers,
    Jefi Santoso

    hi,
    >>>Can this be achieved through BPM?
    yes you can put your transformation step
    and send step in a block and specify an exception
    branch and catch all exceptions that will
    occur during transformations and the send step
    then you can send info from the exception branch to
    any other system
    you won't be able to catch the error's name
    but you will be able to notify any thinrd party
    about the error
    more on error catching:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
    Regards,
    michal

Maybe you are looking for

  • How to add a custom column in a table?

    Hi, I have a requirement to add a custom field into the table of view InrLastHist of component ICCMP_BT_IRHIST. The data to be display in the column will be based on the standard category column. I was thinking of adding a value attribute into the cu

  • Postcript driver issue with Laserjet Pro MFP435nw

    Product Name : Laserjet Pro MFP435nw OS : Win7 Universal Postscript driver not support in corel Draw for Screen change option for different lpi printout, as hp says it has postscript Emulation 3 support, but it fail with Coreldraw  application.

  • Very urgent excise base value isnt captured to are1 and are3

    dear sir, in are1 and are3 documents base exicise value is nt being captured and higher edusess 1% too but BED and educess is captured ?can anybody help me ?is ita notes problem?

  • Viewing "This PC" Devices and Drives when connected through a Terminal Services connection

    Greetings,  [long-time listener, first time caller] I am a service technician who remotely logs into customer servers using terminal services.  I am accessing systems around the globe.  I regularly need to move files from my local system to the custo

  • Mid 2010 iMac and PC...

    Hello all, I know this is a Mac forum but can't seem to find the answer anywhere else. I have an iMac 27" that im interested in sharing the screen with a pc laptop using the mini displayport. My iMac is mid 2010 with mini displayport and PC has mini