[SoIved]nstall Virtualbox,but after installation no /etc/rc.d/vboxdrv
I am trying to get Virtualbox to work. I did `pacman -S virtualbox virtualbox-modules` but afterwards, there is no vboxdrv. I don't use a custom kernel or anything. Why doesn't it install this? I even tried installing virtualbox-source and compiling the module.. but even after that, I still get
[earlz@EarlzMedia ~]$ virtualbox
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.4.4-2-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-modules or
if you don't use our stock kernel compile the modules with
sudo /usr/bin/vboxbuild
You will not be able to start VMs until this problem is fixed.
Last edited by earlz (2012-07-03 06:45:43)
To be more specific, after searching and such I found a very similar post on this forum: https://bbs.archlinux.org/viewtopic.php?id=131612
Wonder(an admin) said to just do `modprobe vboxdrv`. This will sort of work, but is required after each reboot.
Also, after doing modprobe a lot of other things seem to remain broken. I get this error:
Failed to open/create internal network HostInterfaceNetwork eth0 ...
One of the kernel modules was not loaded properly.... try to reload and recompile the modules with /etc/rc.d/vboxdrv setup
The big problem is that somewhere along the virtualbox package versions /etc/rc.d/vboxdrv stopped getting installed. I have a machine that I've had setup with VirtualBox since 2011 and it has vboxdrv and is running the latest version.
Any ideas on why vboxdrv isn't installed anymore?
Similar Messages
-
I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?
In case you are not aware, Mavericks requires a high speed broadband connection.
In the event you need to restore or repair the starutp disk, OS X Recovery also requires a broadband connection as noted here > About OS X Recovery
You can check your download speed here > Speedtest.net
15Mbps or less, you may not be able to install Mavericks or use OS X Recovery. -
I receive a message that indicates this JAVA console 6.0.02.03 update is available for download and installation. After installation Firefox displays a message that this is no longer supported and will be removed the next time firefox is loaded. This has happened several times. Although this may not be related, I am also having regular "unresponsive script" messages displayed, especially with FEBE.
You can remove old Java Console extensions.
See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions -
HT201210 Hi, I have managed to upgrade to ios 5 but after backing up etc...
Hi guys, I am having a nightmare! Managed to upgrade to ios 5 version, but my Apps, and all my files and work has disappeared????? This is after saving in library backing up etc... All my music, my go to doc files, contacts, iBooks etc...!!!! My books and other apps ( empty) are in the library but not syncing with my iPad. Absolutely gutted!! Is there anything I can do to correct?
restore your ipad to the backup you made. turn on manually manage music and videos. sign into icloud, your docs and whatnot, if they were saved to the cloud, should still be there.
sorry this happened to you. -
[SOLVED] VirtualBox complaining after each kernel upgrade
I'm using virtualbox-bin from the AUR (the one with USB support) and after each kernel update this error comes up:
I know it's actually /etc/rc.d/vboxdrv setup
(apparently VirtualBox isn't aware of which distribution it's running on)
This message comes up every once in a while (usually after a kernel upgrade) and I was wondering if I can do something about it... Should I install the DKMS package from the AUR prior to running the above command? Maybe that will shut it up once and for all.
What do you think?
PS: The wiki says to run "vboxbuild" but /usr/bin/vboxbuild doesn't even exist.
Last edited by DSpider (2012-05-15 15:39:13)Solved it a year later because I got tired of running "sudo /etc/rc.d/vboxdrv setup && sudo modprobe vboxdrv" after every kernel update. Hmph... After reading this and studying the virtualbox-hook package from the AUR, I decided that it's finally time to look into it.
It's easy.
1. Create a "/lib/initcpio/install/vbox" file (or whatever you wanna call it) with the following contents:
# vim: set ft=sh:
build ()
echo "Building VirtualBox modules..."
/etc/rc.d/vboxdrv setup
echo "Ok."
help ()
cat<<HELPEOF
This hook rebuilds VirtualBox modules. It does nothing to the initrd image.
HELPEOF
2. Add it to the "HOOKS" section from /etc/mkinitcpio.conf:
HOOKS="base udev autodetect pata scsi sata usbinput filesystems vbox"
Now the next time the linux and linux-headers packages are updated, the script will kick in and the modules will be rebuilt. I used to have it during boot process and it took forever until it would load X. Haha. I remember I used to go to bathroom just after I turned on the computer... Yeah, it took that long before it was done. Anyway, I asked the author if he can perhaps create a virtualbox-bin-hook package or somehow modify it to also work with virtualbox-bin. We shall see.
Oh, and don't forget to add "vboxdrv" to the "MODULES" section from /etc/rc.conf, if you haven't done so already. -
Hi,
I have a specific problem on one notebook. It's a windows 2000 SP4. The installation log does not contain an obvious error message. But after installation, the database homepage doesn't start.
When looking in the alert file I find those ORA 7445 and ORA 472 errors. When starting up the database using sqlplus and stepping through nomount , mount, open, it seems that the database is running for a short period and then again ends up with the above errors.
Any ideas?Hi
ORA 7445 indicates that oracle has detected a core dump when attempting a particular operation. To identify a bug you need to look at the first argument after the 7445 error as this identifies the module where the exception was raised. Use this together with the stack produced to identify a bug if possible. The ORA-600/ORA-7445 Troubleshooter will help identify bugs known to core dump in the identified module. https://metalink.oracle.com/metalink/plsql/f?p=130:14:1905955764385093414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,153788.1,1,0,1,helvetica
Also look into the Customer Introduction to ORA-7445 Errors at https://metalink.oracle.com/metalink/plsql/f?p=130:14:1905955764385093414::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,211909.1,1,0,1,helvetica
-Priya -
[Solved] Missing digest_pw_auth after installation using yaourt
I have installed Squid using yaourt but after installation and setting it up using
https://wiki.archlinux.org/index.php/Squid
I realized that /usr/lib/squid/digest_pw_auth is missing. How can I get it?
# ls
basic_db_auth basic_ncsa_auth basic_smb_auth digest_ldap_auth ext_session_acl negotiate_kerberos_auth_test url_fake_rewrite.sh
basic_fake_auth basic_nis_auth basic_smb_auth.sh diskd ext_unix_group_acl negotiate_wrapper_auth
basic_getpwnam_auth basic_pam_auth cachemgr.cgi ext_edirectory_userip_acl ext_wbinfo_group_acl ntlm_fake_auth
basic_ldap_auth basic_pop3_auth cert_tool ext_file_userip_acl helper-mux.pl ntlm_smb_lm_auth
basic_msnt_auth basic_radius_auth digest_edirectory_auth ext_kerberos_ldap_group_acl log_file_daemon unlinkd
basic_msnt_multi_domain_auth basic_sasl_auth digest_file_auth ext_ldap_group_acl negotiate_kerberos_auth url_fake_rewrite
Thanks.
Last edited by Dukecz (2012-11-09 16:50:48)projectdelphai wrote:digest_pw_auth was renamed to digest_file_auth on 4/30/10.
http://web.archiveorange.com/archive/v/ … ySEyuBXy4x
Thanks. -
Can't see Exchange Server after installation
I know it must be simple, but after installation of Exchange Server 2013 on Server 2012 R2 and getting the "successful" installation message, I can't find the server. It was not problem on Server 2008 and Exchange 2010.
Any ideas as to where I should go to look for Exchange? I can't even setup mailboxes???!!!
I really am lost on this one.Hello,
In addition to above: make sure that Exchange 2013 is installed correctly. Check Exchange installation logs and run the Get-ExchangeServer command using Exchange Management Shell on the new server. You should see both Exchange 2010 and Exchange 2013 servers.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster. -
How can i change port No 1521 after installation
Dear all;
I have finished installing oracle database 10g, infrastructure 10g and BI 10g in one machine ,but after installation i found that the infrastructure use the same port 1521 of the database, and as a result the application server services not working like Forms, OC4j_bi_forms and report , so, how can change the port number after installation and how can i pass this problem during the installation??
Thanksdear Mr.
actually after i installed the db10g and developer 10g and when I start the installation of the infrastructure I get the following message (that telling me that the port 1521 on my host is used by another product and if this port is being used by Oracle Network Service listener version 9.0.1 or higher, may I elect to continue the installation) , so I decide to continue the installation but after that I noticed that not all the oracle application server service not started and when I start forms as example may be the OC_4j_bi get down, and so on⦠and when I discuss this issue with another DBA he told me that this problem because of the using of the same port.
Finally i would like to solve this problem by any case even if i re-install the S/W again, but i'm afarid that i face the same problems.
Thanks -
Windows 7, 32 bit freezes at startup after installation with bootcamp
Hey.
I really hope anyone can help. I have just recieved my new Macbook Pro and I would like to install windows 7 on it. Using the guide to Bootcamp everything went well and I got in to windows. But after installation of the needed drivers from the Leopard CD I needed to restart and now I cant do anything (it freezes after typing my password or sometimes even before) - I have to shut it down.
Everything is fully updated (Mac OS X 10.6.3).
I have tried to remove Windows again and installed it once again, this time i got into Windows, but I then had the same error after updating windows - even without using the Leopard update files.
Anyone know what to do?have one more question for you...
In another environment, where everything went fine, i see green diagnostic report.
while starting admin server it gives me
\Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
C:\Oracle\Middleware\user_projects\domains\EPMSystem>so still it is not installed completely!!
-Sumant -
SAP HR patch Ecc6.0 Ehp4 not found after installation
Hi,
I have installed Ecc 6.0 Ehp7 but after installation i found SAPHR Patches on SAPHR6.0 .(SAPKE600)
WAnt SAPHR patches on Ehp4.
Is there any way which i can do at time of installtion only?
Now i have to create xml stack file from Solman for upgradation to SAPKE604?
Kindly suggest
Regards
AdilHi Adil,
After the installation ECC 6.0 EHP 7 , the base component will be at 600.since ECC 6.0 EHP7 is coming as a ready phase installation.
You need to upgrade all the base coponenet 607 , with the help of SUM.
So you need to generate the stack and upgrade it.
With Regards
Ashutosh Chaturvedi -
I have a Adobde CC account but when i open the app to download the different software, i have illustrator, indesign, photoshop, bridge to install but premiere pro, after effects, lightroom, etc. to "test"...???
Before (2-3 monate before) i had no problem to access to lightroom & after effetcs...help me please. ThxThat's okay , besides I got nothing to do lol hehehe atleast I can make myself useful for someone else hehe
1)Navigate to C:\Windows\System32\drivers\etc and look for file named hosts inside etc folder.
2)Copy the hosts file to Desktop and open the same with notepad.
Check with the hosts file entries , let me know if there are any Adobe entries like 127.0.01 xxx.,adobe.com .activate.adobe.com....etc?
If there are no Adobe entries in Hosts file .
If you wish , you may uinstall and reinstall the app .
You may try below steps :
Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate Adobe Creative Cloud and uninstall it.
End all Adobe related Tasks from Task Manager.
Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
Once the installation process is completed , sign in and check.
Still same issue ?? let me know -
My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
Maybe you are looking for
-
We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF
-
Hi sir, I have a hp compaq 6910p laptop with sound issue. I have attached a snapshot of device manager and sound devices list window But sound is coming on headphone. I checked speaker. Built in speaker is working fine on another lap
-
Excel is Merging Cells w/ Wrapped Text.. Make it stop!!
Post Author: ray3280 CA Forum: Exporting Hi All, Currently I am generating reports in Crystal and Exporting them to Excel. I have a few fields that I rotate -180 degrees so that the text is Vertical instead of Horizontal and the height is about 40pi
-
What is taking up all the room on my 160GB HD? And what is safe to delete?
I am new to Mac, and have a Macbook Pro, OSX 10.5.8, with a HD of 160GB. I use an external HD to back up my Home Folder and for Time Machine (which may be redundant, not sure). I use iDisk to back up my Personal Data and Settings. There is a HUUUUGE
-
I have installed 20 gb memory - Only 13 gb showing in Premiere Pro - Any Help? (Windows 7 64 bit - Quadro 4000 card - 20gb DDR3 PNY RAM) I doubled Checked with SPECCY that something wasn't amiss