SOLAR01 - BPR content for Oil and Gas - JVA processes
Hello
We are dealing with the creation of the structure (scenario, processes and steps) for a Oil and Gas project trying to use BPR. In order to locate the right process we are dealing with Solution Composer, with configuration variants from the Oil and Gas Soluton Map. We are not able to find any of those processes in the BPR. We look any process with joint or venture words in it but there is none. We have Solman 7.01, stack 25 and ST-ICO 150 level 27 (the latest available)
Any suggestions?
Regards
Esteban Hartzstein
Hi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh
Similar Messages
-
Need Role Design for Oil and Gas industry
Hi All,
i have a requirement of designing roles for Oil and Gas industry. Could any one share some material/link or overview on the same.
if not all, Role Design on UOM is also fine
regards
PlabanHi Mythily,
If you already know something about explortion of oil, then you will find PRA (production and revenue acconting) interesting. This module deals with exploration of oil and gas and then distributing the revenue to owners.
You can find detailed information in help.sap.com. Follow the link given below for PRA help:
http://help.sap.com/saphelp_oil46csp2/helpdata/en/ec/9d2c3adcc8431be10000000a114084/frameset.htm
Reading some of the material will give you more clarity whether you like it or not.
And it is perfectly fine to have ABAP knowledge, that will help in going deep into Oil and gas.
Rgds,
Abhishek -
SAP S/4 HANA for Oil and Gas
Hi All,
When SAP is announcing its road map for SAP S/4 HANA for Oil and Gas strategy. Which functionalities they are keeping from R/3, which they are dropping and which they are adding. How they are planning to simplify this area!!
CheersDear Phillip,
Cloud enabled software can be easily deployed on-premises but not vice versa.
this could probably be the deciding factory, for every customer : - )
no one would want to block their future...
so even for on-premise, its better to start with cloud and go for hybrid model and i believe
if this lock is there.....
then every on-premise solutions will have a cloud solution.....
want to see your argument on, any one thinking, i want only on-premise, and i will not be needing
cloud solutions in near future..... also for hybrid customers, cloud first and then on-premise would be pain area. -
Best Practice for Oil and Gas Field Data Capture
Hi All
What is the best practice to capture volume data of Oil and Gas commodities in SAP? There is a solution [FDC|http://help.sap.com/miicont-fdc] that address the requirements however what parameters it asks, whats the process and how it calculates different variables isn't provided over the resource center.
Appreciate any response.
Regards
NayabHi Zack,
It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
Hope this helps. -
Template implemntation for oil and gas business with business line of aviat
While standardizing processes across country for a oil and gas business which has implemented SAP ,do a standard template for a fuel business should be used or specific templates for lubes, aviation business lines be used
Hi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh -
Solution Manager BC sets for Oil and Gas Downstream
I am trying to find the oil and gas BC sets for downstream so I can get the basic SSR config done via a CATT script. How do I find them and install them on Solution Manager. I have tried looking at the BC sets I have but I can not see any for Oil, OGSD or SSR.
Having a similar issue , please share the solution once you find one
-
Prospecting and Exploitation solutions for oil and gas company
Now we are implementing SAP for an oil and gas company, they want to manage Prospecting and Exploitation through PS.Does anyone has some related documents or experiences?We need help eagerly. Thank you!
Are you using SAP's Oil and Gas solution with Joint Venture Accounting.
If I remember correctly we used Business Area's to identify Exploration v Development v Production
Unfortunately no documents available
Steve -
Oil and Gas Business process overview
Hello experts,
I am a SAP BW consultant, I am very much interested to know
the business process flow in the Oil and Gas company
so that i can explore before entering into the project.
Hope you experts will help me out with some Good Stuff
which give the details flow of the oil and Gas company
as well as the table and T-code for this application.
Thanks alot in Advance.
Regards
KK
Edited by: KK on Jan 28, 2010 1:46 AMHi
Please go throgh below link
http://help.sap.com/saphelp_oil472/helpdata/en/13/9c063628742a09e10000009b38f839/frameset.htm
http://www.sap.com/services/education/catalog/industry/globaltabbedcourse.epx?context=%5b%5b%7cTIOG10%7c%7c1%7c%7cG%7c%5d%5d%7c
if this suffice please give marks
Thank You
Niranjan -
Inventory for oil and gas sector
Hi,
Have Somebody already deal with oil ans gas company?
If yes, how did you manage oil item properties?
I mean temperature, density, volume.
I have try with user field but it's not possible to add user filed on stock entry document.
is there an add-on for that?
Regards.May be you could use batch management for these items.
There are different attribute fields and you can add UDF too to the OIBT table. -
Upgrade issue for Oil and Gas HPM
Dear friends,
I am facing a strange a strange situation when I am testing the same material in two environment viz., 4.6 and ECC 6. The situation is:
I am trying to go posting for a material (in this case I am doing MI04) in ECC and I am getting an error "Quantities cannot be converted for the material MM328". When I checked the material, 'oil view', I find UoM group is used and no conversion group. Base unit used is not present in the UoM group. When I use the Liter in the conversion from the base unit, it is getting posted. I feel system is working properly as per the master data setting.
But when I checked the earlier system (4.6C), the document is getting posted. When I checked the master data, only UoM group is maintained and no conversion group maintained. And no liter is maintained in the conversion from the base unit, and base unit is not maintained in the UoM group. But I have a doubt whether system is working as per the setting in this case.
So my question is:
1. Whether we should maintain always UoM group and conversion group together?
2. What is standard SAP behaviour if we only maintain UoM group and no conversion group?
Appreciate your help on this.
Thank you,
PrakashMay be you could use batch management for these items.
There are different attribute fields and you can add UDF too to the OIBT table. -
Regarding XI utility for oil and gas
hi,
i worked mostly in core abap.know iam assigned to XI utility project.can u experts let me know what r the basic things i need to learn to work in XI utility project.i already searched in forum.thanks in advance.May be you could use batch management for these items.
There are different attribute fields and you can add UDF too to the OIBT table. -
Oil and gas best practices - need information
Colleagues!
Help me to find some information about sap oil and gas best bractices.
I am interested in .ppt presentation, word documents that in some way describe best practices for oil and gas industry.
Thanks in advance for your help.Hi,
Can you please check this link http://www.sap.com/industries/oil-gas/index.epx.
Hope this helps you.
Rgds
Manish -
IFRS Solution for JV Accounting - Oil and Gas
Hi
My client is upstream sector Oil and Gas industry. I am into IS Oil. They are moving for IFRS. I know what all changes are required in SAP FI (like parllel ledger is required, new depreciation area is required, etc)
But i am not aware of SAP JVA. Please tell me which additional functionality is required for SAP JVA for implementing IFRS into SAP JVA.
Please help or send some link.
Edited by: Meenu_ND on Dec 22, 2010 3:21 PMHaving a similar issue , please share the solution once you find one
-
How/where do I get BPR-content for SAP best practices into solar01/solar02?
I am looking to use SAP Solution Manager to perform a blueprint & (parts of) a configuration/realization with a number of SAP ERP best practices as the starting point. Unfortunately the BPR-content for my solman seems to be missing as I cannot find any of the processes defined on http://service.sap.com/bestpractices when scoping the blueprint for my project in solar01. We have ST ICO150 loaded, or so I am told.
Is there additional content out there somewhere so I can add processes/scenarios into solar01 from best practices?Hi
follow this guide
this is a step by step screenshot guide
https://websmp110.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
Hope query answered.
Regards
Prakhar -
I would like to use Solution Manager and the BPR content to define business scenarios, business process, and process steps for an implementation project. When I browse the BPR in solar01, I notice that all the business scenarios are for ECC 5 or ECC 6, but we are working with version 4.7. If I create a scenario and go to the BPR to browse for business processes, I can see that there are business processes for version 4.7. I am not sure if we have a configuration issue that is limiting our visibility of the business scenarios or if they just don't exist. Can anyone tell me if business scenarios exist for SAP ERP 4.7?
Hi Paul,
See if you can download it from the service marketplace. You can view note #891616 for more information on how to download these BPR. Following notes may help too.
851329 : Finding implementation content for generic solutions
856989 : Business scenarios for mySAP ERP
629829: Download of Solution Manager Contnt from Service Marketplace
Kindly,
Fabricius Zatti
Maybe you are looking for
-
How do i return to a previous system after updating?
After trying to update our IMac to improve how it runs, we are unable to go back to our saved previous system. the entire computer is now set up differently and has none of our information on it. I think it's even running an older OS. I see all of ou
-
Hi All, We have transported few cubes along with transformations,DTPs. All went fine to quality except one property. In the infoprovider properties(Environment->infoprovider properties->Rollup)Do not coolapse aggregates is selected in Development but
-
How to populate the characterstic automatically
Hi All, I have to populate the 'Z' characterstic automatically when demand planners create new CVC, I found the BADI /SAPAPO/SDP_MASTER1 the newly created Z Characterstic should be based on the combination of standard characterstics, could anybody t
-
Hi I'm using gentoo linux and i've been using firefox with the sun java plugin for some time without any problems. however, in the last few weeks there suddenly appeared the following problem with the java plugin: Whenever I try to open a page with a
-
hello Gurus I am quite new to BW but i want to improve my skill by addng ABAP knowledge to it but when i discuss it with people they tell you need to know ABAP stuff which is relevant to BW..which kind of makes sense..but ia m not sure...can you peop