Solaris 10: Remote Display of JDS rel 3 and CDE over Xwindows

On an Ultra 5 running Solaris 10, I want to start a session of either Java Desktop System Release 3 or CDE and display it on another system running an Xwindows server (running on a Windows box, but I don't think that matters). I also don't want to add a VNC layer to the picture.
The network communications are configured properly and are working fine as I can run Xwindows applications over it without a problem. The only thing to do before hand on the Ultra 5 is to set the DISPLAY environment variable (as expected).
What I would like to know is what commands to give at the command line to start the Java Desktop System Release 3 session to display the login screen on the system running the Xwindows server so I can run the full JDS from a remote client.
I would also like to know the same thing to run CDE this way.
I've tried a number of things which don't work so therefore this post. I've also looked around quite a bit for this information in a number of manuals and of course on the web and cannot find this information anywhere. I'm surprised because I would think a lot of people would want to do this, and it shouldn't be that hard to do!
Any tips/pointers are appreciated! Thanks.

...I should add that I am trying to do this without using a display manager (i.e. XDMCP), may it is not possible?

Similar Messages

Data display - aligning group data and carry over on new page logic - 11G

I am fairly new to BI Publisher, so any help would be much appreciated. I am working with a standard pdf form to display Purchase Order Data. I have saved the image of the pdf as the background of the page. I have a simple table where I am inserting all the data and aligning it on the page so it appears to be in the correct place on the form.
The form has a section containing 10 blank lines to display the PO data. Each line is .25 inches.
The problem occurs that at the line description can have 254 characters but the space on the line allows for 51 characters. So I need to display the data something like this (for simplicity sake)
TableA.id TableA.Description254
Line 1 1 Blah, 1-51 characters of line descr
Line 2 Blah blah, 52 - 102 characters
Line 3 2 Blah, 1-51 characters of line descr
Line 4 3 Blah, 1-51 characters of line descr
Line 5 Blah blah, 52 - 102 characters
Line 6 Blah blah, 103 - 153 characters
anything that carries over needs to go to a second page with a different background image. So I have several questions.
1. Any suggestions on how to display the PO Line, so I can substring the PO line description and display the remaining data on a following line? A second line would write the next 51 characters of data if it exists, and would not display the first column, (TableA.Id)
2. Any suggestions on how to load the carry over data (anything over the 10 lines on the first page) and display on the following page.
I am including a screen shot so this might make more sense. I have lightly dashed orange lines showing of my table which I use for aligning the data. It is only for reference.
[ http://www.fifthq.com/bi.jpg|Pdf image]
http://www.fifthq.com/bi.jpg

Ok, just in case anyone runs into the same issue. Here was my solution.
I added a made up record to the existing xsd template that served as a place holder for my dynamic content.
I created an app package that has two properties.
1. Full String
2. Single Line String
The Method takes in the column width as a parameter. It searches through the Full String until it finds the last available word before the column width. It then returns that as the Single Line String and updates the Full String to what's remaining.
If I have any of the Full String remaining I keep calling the method.
I can provide more specific details about the method if anyone needs it.

Jds-help and Solaris Management Console compatible with jdk6u1?

Hello,
I am running Sol 10 11/06 for sparc on a Sun Blade. I just upgraded to jdk6u1 from jdk5. I installed all required j6 packages, and then installed patches for j6u1. I then used pkgrm to remove all jdk5-related packages (I searched for all packages starting with SUNWj5 and then removed them). Java seems to be working fine.
Now, my Desktop Overview and other java-related help functions do not work. I get this error:
# jds-help ghelp:jdsoverview
** (jdshelp:826): WARNING **: An exception occured 'Unknown CORBA exception id: 'IDL:omg.org/CORBA/COMM_FAILURE:1.0''
A large jre error log is produced that mentions a problem with JVM:
# An unexpected error has been detected by Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xfc94dd6c, pid=1338, tid=1
# Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
# Problematic frame:
# V [libjvm.so+0x14dd6c]
Solaris Management Console does not work either, and gives an error that no suitable java 2 version is installed in /usr/java.
Maybe I removed a j5 package I shouldn't have. Which j5 packages are related to the operation of jds-help? Any ideas as to what is causing my problem with jds-help and smc?
Does anyone know FOR SURE that jdshelp and smc are compatible with jdk6u1?
Thank you...

I got rid of jdk6 and re-installed 1.5.0.11. Solaris Management Console 2.1 works again, so it appears as if smc and Sun Studio 11 are both INCOMPATIBLE with jdk/jre6.
jds-help still does not work, with a jvm error, so perhaps it is also incompatible with jdk/jre 1.5.0.10+.

Apple Remote Desktop, 2010 Mac Pro, and six displays

Under 10.8, we were able to operate a 2010 Mac Pro (MacPro5,1) with 2 x HD5770 video cards and 6 x LED Cinema Displays (the mini DisplayPort models, two of them via IUSB-powered Atlona DVI Dual-Link-to-mDP adapters, via Apple Remote Desktop.
Under 10.9 (currently 10.9.2), all the displays still work, but ARD is having significant heartburn: if it is able to connect with the ARD agent on the display syste, the display arrangement is incorrect, and no amount of swapping mDP cables, moving the displays around in the Displays System Preference pane, and/or rebooting appears to help. Oh, and the most recent end state, when I finally managed to get the menu bar on one of the displays on the top (physical) row (we have them arranged 2 x 3, in order to display 4096 x 4096 pixel movies of spacecraft data), flummoxed ARD completely --- it simply refused to connect with the display machine at all. (I can ssh into the display system and use a cabled keyboard and mouse as well, but that's not a long-term solution: we have to be able to operate remotely, as we did under 10.8.) Oddly, ARD works OK, if not perfectly every time, with the target system when it's only connected to four or fewer displays (regardless of whether they're connected to mDP ports or via the Atlona devices). The host ARD system is another MacPro5,1 with 24 Gbyte of RAM; the target has 96 Gbyte.
Reading the release notes for ARD 3.7.2, it sounded as though all our issues would be addressed, but alas, it is not so: we're still stuck with ARD trying to but unable to open a "Control" connection to the display system.
Does anyone have any experience, positive or negative, with a similar setup under 10.9 and ARD 3.7.2?
Is there any way to clear all the settings in ARD? I can't find any .plist files with client system-by-system info in them, and I suspect they are (appropriately) encrypted because they can contain passwords, or at least store the hashed passwords in encrypted fields.
Thanks in advance for any clues for the clueless.

Mac Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
Mac Pro (Mid 2012)
Jun 2012
10.7.3
10.8
11D2001, 12A269
Mac Pro (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3
10F2521, 10F2554, 11A511a, 11C74, 11D2001
Mac Pro with Mac OS X Server (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3 (Server)
10F2522, 11A511a, 11C74, 11D2001 (Server)
Mac Pro (Early 2009)
Mar 2009
10.5.6
10.6
9G3553, 10A432
Mac Pro (Early 2008)
Jan 2008
10.5.1
10.5.2, 10.5.4
9B2117, 9C2031, 9E25
Mac Pro
Aug 2006
10.4.7
10.4.8, 10.4.9, 10.4.10, 10.5
8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
I expect your Hardware is essentially unchanged since the 2010 model, and should run the custom 10.6.4 they provided, or 10.6.5.
The "Full Retail" 10.6.3 is only 10D575, so it will not suffice.

My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?

My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?

If they are the instructions I think you might have seen, they are for the Apple TV 2.
Unfortunately I think your Apple TV may have failed.
You might try removing ALL the cables for a while and trying again, but I think you may be out of luck.

HDCP display issue with Yosemite and Macbook air

Hi - Sorry if the question has been asked before and answered.
I have an issue where since I have upgraded to Yosemite, I cannot play any of the movies I bought prior to upgrading and I can even play trailer from the iTunes store...
Any ideas?
Thanks

Too bad this didn't help.
HDCP errors can also occur when your display settings are incorrect and when you have non-original / non-Apple display software installed. Think a special driver to support a specific type of external display, or a remote viewer application like TeamViewer or AirParrot.
If you're having the HDCP error with an external display, disconnect it and test with the MacBook Air's own display.
If the issue persists on the MacBook Air's own display:
To restore your display settings to factory default: do a PRAM reset:
http://support.apple.com/kb/PH14222?viewlocale=en_US
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.
Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
If you have special software installed, it would be best to try to boot the computer to safe mode:
http://support.apple.com/kb/PH18760
Choose Apple menu > Shut Down.
After your Mac shuts down, wait 10 seconds, then press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after you hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator.
If that doesn't solve it, peruse your Applications folder in the Finder and see if you can delete unwanted video / viewing-related applications.

Resolution changed on remote display. Fan runs at HIGH speed.

Today, for no reason, resolution changed on remote display. Option needed no longer shown. Tried SMC and PRAM resets. Now resolution on the MAC AIR is messed up (not full screen) and the fan runs at HIGH speed. This is a sudden change. Have been using the MAC Air in this exact configuration for 2 years. Tried restart/reset of monitor. Nothing. Did resets on MAC and screen changed there. Also the fan runs at high speed.

Hi donaldfromsaint charles,
It seems you are experiencing an issue with displays and their resolutions. The following article provides troubleshooting guidance which may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

JDS and CDE login loop

I performed a fresh install of Solaris 10 on a Sun Enterprise 250. When I go to login to JDS or CDE, it continually loops back to the login screen. I can login through the command line though. I checked /var/dt/Xerrors and didn't see any messages related to the problem. Any suggestions would be appreciated.

I just did a fresh install, and JDS and CDE seem to work fine until I install Java System Directory. Once I install that, I can no longer login through the GUI, but command line still works. Any ideas?

New monitor/calibration; now colors won't display correctly in ACR and Elements

Just got a new ASUS LCD monitor, and calibrated it with the Spyder 3 Express.
Now when I open a .CR2 file using Elements to edit the RAW image, the color is displayed as yellowy-gray and dull. It looks the same when I pull it into Elements 7, unless I remove all color management (which, if I save the image, actually then renders the image colors neon and oversaturated with lots of pink and red tones).
I also use Lightroom 3 and I am having the same problem there. Upon import of either an edited Jpeg or a .CR2 RAW file, the color in Lightroom is displayed as dull, grayish yellowy-green.
If I export and view the very same image in GIMP, Picasa or on the web, as long as the colorspace is intact (sRGB), the color is accurate. Not so in Elements or Lightroom.
If you have experience with this problem is it the monitor, the calibration, or Elements and Lightroom. I am beyond frustrated and need to see my colors properly. I have not had this problem before.

I don't use Spyder to calibrate my monitor; instead, I use the software and tool that X-Rite makes and it came with my NEC wide-gamut monitor. I suspect that the tools are similar.
First, make certain that you're using your Spyder spectrometer and the accompanying software correctly. Although I consider myself relatively computer saavy, I find that I have to follow the instructions carefully.
Then, calibrate your monitor so that the colors and brightness the monitor displays are correct for your printer setup. In my case, the tool uses ICC color standards to set the colors. And, I tell it I want the monitor's brightness to be 90 candelas per square meter (cd/m2), which is about the same brightness as a blank white piece of photo paper. With the monitor brightness set at 90 cd/m2, I avoid getting prints that are too dark. If you calibrate the monitor correctly, the colors should look good and you should have a white that looks white and a black that looks black - that is, you shouldn't have any colors that don't look right.
Second, when you use Elements (PSE) or Lightroom (LR) to print, be sure to indicate that you want PSE or LR to control the colors and not the printer. It's very important, too, that you have the correct printer-paper profiles downloaded into the printer driver and that you select the correct paper profile. I have an Epson 3880 printer and I use Epson papers (mostly); so, I tell PSE to use the profile that fits the paper I'm using - for example, Epson Premium Glossy. When I downloaded the printer driver into my computer, it also downloaded the Epson paper-printer profiles and they appear in the print dialog boxes used during the printing process. (Other paper manufacturers, such as Ilford, make profiles available for downloading on their website.)
I hope this helps; if it doesn't let's go into some more.

HP Pavilion DV6-6077er Display driver stopped responding and has recovered

Hello!
I am using this laptop for 3rd year already. OS is Windows 7, every standard driver is downloaded from the official page and installed.
I have a problem, which sometimes occurs while using web browser, graphic-editing software and some games.
The screen starts flickering and then recovers with a message: "Display driver stopped responding and has recovered".
I am usind official AMD drivers from 2011.
Before I have tried to install unofficial drivers or drivers from AMD web site, but all of them had random BSODs and errors. Only the official driver works stable, but sometimes causes this error.
Is there any possible fix for it?

Hi Kakofonn,
At this point I would recommend doing either a System Restore to when it worked or if you don't use restore points do a full System Recovery. If you go this route make sure that you back up your information you don't want to lose. If you don't want to do that then I would recommend calling HP as they will be able to remotely login to your computer. You can reach HP Total Care at 1-800-474-6836 or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Is it possible to display record detail across and down?

I am using forms Developer 10.1.2.0.2
Is it possible to display record detail across and down? I would like to create a simple form that displays records from one column in one table. This table has many records, so I would like the data to be displayed in two directions, as is possiblie in Reports Developer. In other words, have 3 columns with 5 rows all displaying the same column from the same table. Ex:
code1 code6 code11
code2 code7 code12
code3 code8 code13
code4 code9 code14
code5 code10 code15
FYI - the main reason I want to do this is to create a fancy form that is an LOV. I plan to have each column next to a check box. Currently, we have the column next to a check box, but with only one column the user has to do too much scrolling to get to see the various codes.
Edited by: E Slazyk on Apr 22, 2009 1:43 PM

It seems programmatically possible...
You could do a JSON product dump and tie codes to url's, then tie this to an autocomplete search bar with a click through or delayed auto navigation...
http://jqueryui.com/autocomplete/#remote-jsonp
I hope this helps.
@webmosphere
www.webmosphere.co.uk

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My ipad was is displaying an alert message " A wi-fi connection is required to download your apps and media". So it has been connected to the internet over night and this morning but is still displaying the alert message and it won't go away. what to do?

Hi,
My name is Norbert. I am having some difficulties restoring my icloud back up. My ipad was doing an icloud back up and the alert message displayed on the ipad after my internet was interrupted "A wi-fi connection is required to download your apps and media".
I got the internet working, my ipad is receiving internet network but the alert message is still displayed on the ipad and won't go away, to make matters worse the ipad is frozen and i can't do anything.
Please can anyone with a similar experience tell me what to do in this situation?
Thank you

Welcome to the Apple Community.
Have you tried a hard restart. Press the on/off button and homescreen buttons together until the device shuts down.

Mini display with vga adapter and vga multiplier

running into problems with the mbp using a mini display adapter to vga and a vga multiplier. no signal at the projector. is there any difference between a vga signal from a pc and a vga signal from apple's mini display adapter to vga? ie. bandwidth, resolution, etc.... would upgrading to a new os ('lion') help in this problem? many thanks

Hi Guys,
Checked the mini display with Dell flat monitor and Samsung LCD tv , works perfect. The VGA port of my old monitor is not in good condition.
-Abhishek

Solaris 10: Remote Display of JDS rel 3 and CDE over Xwindows

Similar Messages

Maybe you are looking for