Solaris 8 - Print the HP printer using JetDirect

I see on HP's Web Site they only offer HP Jet Direct for Solaris 7. How do you print to an HP LasterJet printer (HPLJ5) connected to the network via an HP JetDirect card.
I tried lpadmin with null device and printing to an IP address and port, but I do not know if this is the right thing to do. Even if it is, I do not think I have all of the right parameters.
Has anyone else tried this?

I do not have the exact printer model that you have, but have used several HP wireless printers that all work just fine with an AirPort Extreme.
Your wireless printer will connect to the wireless signal provided by an AirPort Extreme.....or any other wireless router.....just like any wireless device would connect to a network:
1) Identify the network to be joined during setup
2) Enter the wireless password to connect to the network

Similar Messages

  • When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

    When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

    What is the resolution of the picture that you are trying to print?
    Go to Image>resize>image size, read the resolution in px/in, then report back, please.
    Also, are you in a position to try printing with another printer in an attempt to narrow this down?

  • How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

    How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
    This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
    Customer Service DCC

    I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
    And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
    Fortunately, i finally found what was wrong with my generated PDF.
    In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
    Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
    As suspected i did not follow correctly the specs on xref table
    Now i'll go and figure what i did wrong with the deflate filter
    Thanks for your help.

  • Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

    We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
    I would appreciate any help...
    Thank you

    This worked for me.  GP
    Problem : error 1075 and Local print spooler service is not running.
    problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
    I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista.  HP came up with simple solution below.  The regedit part is what fixed mine.  I did not need the safe mode part.  I think Lexmark should add the solution to your knowledge base.
    ==============================
    From HP:  Please perform the below given steps in safe mode to resolve the issue.
    Reboot your notebook and press F8. The system will show some booting options select safe mode.
    Note: Starting computer in safe mode may take some time.
    Uninstall the printer using Programs and Features from the control panel of your notebook.
    Uninstalling any software from Control Panel :
    1. Click on Vista (start) button
    2. Click on control panel
    3. Double click on Programs and Features
    4. Click on YOUR Lexmark Printer  and click on remove.
    Download and reinstall the printer software using the below given link :
    http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
         NOTE:  Clicking the link may give an error indicating it is invalid.
                Copy and paste the entire link in a new browser window.
    After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
    Click on Vista (Start) button, and type Regedit.exe in search bar
    Navigate to the following branch
    HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
    In the right-pane, double-click the DependOnService value
    Delete the existing data, and then type RPCSS
    Close Regedit.exe
    Restart the computer.
    This should resolve the issue.
    For information on keeping your HP and Compaq products up and running, please visit our Web site at:
    http://www.hp.com/go/totalcare

  • When I populate a form and send to my printer, the form prints without the info I entered

    When I populate a form and send to my printer, the form prints without the info I entered. How do I fix this?

    Posted last week:
    Epson Printer Drivers v2.19 for OS X
    If you use Software Update, probably got installed. If you are like me, you clone your system before any update or changes, in case something breaks.
    Windows you don't or haven't heard of? VM = virtual machine, ie a guest OS running under Mac OS (or running natively on its own partition, seeing sometimes there is software that is essential but only needed for business or once in a while). Runs just like another app (and uses an app to control the guest OS).

  • I have PSE13 on my system.  It was functioning properly and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to c

    I have PSE13 on my system, Windows 8.1, 64-bit.  It was functioning properly after installation and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to check your printer settings before printing."  and then this statement:  "Default printer could not be opened."  I have reloaded drivers for both printers and made any upgrades possible.  It was working fine before and now all of a sudden, nothing.  Would prefer to have old PSE v.12 back, it worked with no problems.

    See this thread
    My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

  • How to print the mass printing in smart forms?

    Hi Experts,
    I have a problem, i could not found how to print the mass printing in smartforms. Can any body explain.
    Regards.
    Venkat N

    Hi,
    Check bellow maintained links
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
    http://www.sap-basis-abap.com/smartforms/smartforms-in-details.htm
    Regards
    Gaurav

  • I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

    I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

    See this support document. http://support.apple.com/kb/TS5185

  • I have a hp m175nw printer. the email prints from my iphone, but the picture does not

    m175nw printer. the email prints from my iphone, but the picture does not
    This question was solved.
    View Solution.

    If the DPI(dots per inch) is under 100, the printer will not print the picture because it would be too low in quality. Pull the picture up on the computer, right click on it and click on properties, Check out the horizontal and vertical DPI and see if both of those numbers are least 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint the pic? The AirPrint route does not have the same DPI requirements as the ePrint .
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • How to print the GR tag using customised output in TCode MIGO?

    Hi All,
    I created one customized output type for transaction MB90, it working fine for this transaction. So now my client want same smartform to be used in MIGO transaction. I confirgured same, whenever we post the document in MIGO it should the print the GR tag automatically, its not happening i.e its not prininting the GR tag.
    I want to print the GR tag from migo using z-output type. Pls let me know the solution.

    Hi,
       Please chek the following.
    1. Txn. NACE... Choose "ME" and click on "Output Types" ... check in you output types did you maintained the Form (WE01, WE02,WE03)
    2. Txn. NACE....Choose "ME" and click on "condition Records"... here maintain the details
    Trans./Event Type: WE
    Print Version: 1/2/3
    Print iten: 6
    Med: 1
    Dat: 4
    Lang: EN
    Under Communication maintain the "output Device" and flag "print immedi" and "release output"
    SPRO>MM>Inventory Management and Physical Inventory-->Output Determination..
    Here maintain the details
    1. Maintain Conditions
    2. Assign forms and Program
    Regards
    GK.
    Edited by: Gnana Kumar on Nov 11, 2010 11:46 AM

  • My printer will not print the web pages using firefox...how do I set it up to print a web page?

    I have an hp photosmart c4180 printer and it will not print the web pages in firefox...how exactly do I set up FF so I can print web pages? I will need step by step instruction also on exactly where to go to set it up.

    Open System Preferences (gear icon on the dock), then open Print & Scan
    Click the + button at the bottom of the printer list
    If your printer appears....not all printers are supported....click on the name to highlight it
    Click the Add button to install the printer at the AirPort Express location
    Try to print. You must choose the correct printer at the AirPort Express location since the printer is "installed" at other locations on your network.
    If you open Print & Scan again, and select the printer at the AirPort Express, there is an option to make the printer the "default" location, so you do not have to choose which location to select when you want to print.

  • Hp laserjet 4m printer, the greatest printer in the world vs 10.5

    I have an old HP laserjet 4m printer. This is the best investment I ever made for my business. It has been a great workhorse, always reliable. Now with Leopard it does not work. The print driver sees the printer and allows about 2 seconds of connectivity, then it dis-engages and flushes the print job. Anyone find a work around for this? Every app does the same thing. I am using the LaserJet 4M printer driver supplied by apple.
    Also is anyone else haveing trouble saving files to an external hard drive from Adobe products running Leopard?

    lilacsrock wrote:
    My HP Laserjet 1600 printer will not print on my new OS X 10.8. Macbook Pro laptop.  Mac sees the printer in the "Add Printer" window but then gives the message, "Software for this printer isn't available from Apple.  Contact the printer's manufacture for the latest software."  I did but HP's website says that the software is available from Apple!
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03411613
    Products not supported
    The following products are not supported in Mac OS X including the Mountain Lion operating system:
    HP Color LaserJet 1500 and 1600 Printer series
    I recommend you purchase a printer from a company that visibly supports OS X. HP is not among them.

  • Right Click PDF print the file prints & closes Adobe stays open

    This issue has been brought up in the past however there does not appear to be an adequate solution.
    It appears it was introduced as far back as version 8, I am basing from what I read in posting.
    When you right click a PDF to print Adobe opens the file prints the file closes however the Adobe Reader window stays open.
    http://forums.adobe.com/message/2604089#2604089
    http://forums.adobe.com/message/1780621#1780621
    The right click print is not the only instance of this behavior.
    When other programs are useed to call Adobe Reader to produce & print the PDF the Adobe Reader remains open.
    It seems like a small thing but it is a large annoyance and I can't think of why it would be desired by anyone.
    Adobe, please fix this.

    If you have a postscript printer or rip which has the ability to create hot folders to link to the printer queues you could simply drag-n-drop and PDL (page description language) file like PDF, PS, EPS to that hot folder to initiate printing. Again, very dependent on your printer/rip device.

  • Can you print the "theme" you used to make the dvd onto the dvd?

    I used the roadtrip theme.  I want to print directly on to the dvd, and I want to use the same roadtrip theme.  can you do this?  how?  if possible.

    Is this the background you're looking for?
    It's located in the HD/Library/Application Support/iDVD/Themes/iDVD 6/Road Trip-Main.theme/Contents/Resources folder.  Or you can just drag the background image from this post to your Desktop.
    If you want to have the images you added to the dropzones included then take a screenshot of the iDVD window as Klaus1 suggested.  That will give you a 72 dpi image like this:
    with the dropzones filled of course.
    OT

  • I have an airport extreme with a HP Folio laptop and cannon pixma MX882 printer. when i am VPN'd in thru Cisco vpn and try to print the wireless print connection stops. i Un-VPN and it prints. then i have to go back into VPN to continue?how do i configure

    i have an Airport Extreme wireless router, HP Folio laptop (company supplied) and a Canon PIXMA MX882 wireless printer,copier, scanner and fax.
    when i am VPN's in thru CISCO VPN to my company Intranet site I cannot print wirelessly. i have to turn off VPN, priint and log back into the company intranet site.  is there a way to configure the router so that it is not blocking the signal?
    Tx

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Maybe you are looking for