SOLMAN_SETUP tcode error

Hi experts,
I am new to the basis, I want to configure basic configuration settings in Solution Manager.Already i created HTTP connection to Solman. When i tried the SOLMAN_SETUP transaction code, It is not getting open.Please help in this.Thanks in advance.
Regards,
Patan Thavaheer.

Hi Patan,
Have you maintained the IP address in /etc/hosts as <IP address of Solman System> <Hostname> <fully qualified domain name>.
Also check and add the following profile parameters
login/create_ss02_ticket=2
login/accept_ss02_ticket=1
icm/host_name_full = fully qualified server name
icm/server_port_1 = PROT=SMTP,PORT= <> 0
icm/server_port_0 =PROT=HTTP,PORT=5$(SAPSYSTEM)00,TIMEOUT=60,PROCTIMEOUT=800
Regards,
Anitha

Similar Messages

SOLMAN_SETUP Wizard - Error on Managed System Configuration

Hi all,
I've installed SAP Solution Manager 7.0 EHP1 (Stack 19) on linux-oracle.
After I start the configuration with SOLMAN_SETUP tcode.
The "Initial Configuration" and the "Basic Configuration" phases are termined with success.
In the third phase "Managed System Configuration", I try to connect itself on client 001 but when I try to generate the RFC Connection I received an error message on wizard when the system create the "Back RFC Destination". If I check this RFC on SM59 tcode it works!!!! I don't understand why I received the error message during the wizard.
Then on "Check Prerequisites" I execute the "Diagnostic Prerequisites" phase and I received 2 error messages:
a) The Introscope Enterprise Manager configuration cannot be loaded. Details:
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration. at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251) at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415) at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461) at com.sap.sup.admin.wily.jdbc.EMOverview.getAllEMgrs(EMOverview.java:220) at com.sap.sup.admin.selfcheck.checks.wily.em.EmJdbcCheck.process(EmJdbcCheck.java:32) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:165) at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781) at java.lang.Thread.run(Thread.java:770)
b) The RFC Read Destination is not available for connection to Satellite System (RC=2). Details:
Please check SAP Note 1106900
I find The RFC Read Destination on SM59 tcode and it works if I try to "Connection Test".
Could you please help me to check the two errors??
Thanks in advanced
Moreno

Some more info when I tried to run the setup wizard again.
Step Wilyhost Agent Details
Setup Exception: Empty or no Wily EM host retrieved from secured global config! Going on with "localhost".
Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead.
Created destination XXX|hostname_xxx_01
Created action xxx -XXX AbapSystem
Created action xxx|hostname_xxx_01 - XXX|hostname_xxx_01 AbapInstance
Created 2 action(s).
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
Exceptions
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:269)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:440)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:87)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:110)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:416)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:328)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:545)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1680)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1950)
at java.lang.Thread.run(Thread.java:571)
hostname is the hostname of the system, i removed it.
xxx is the solution manager sid.

Illegal Tcodes error while role generation in BRM GRC 10.0

Hi Experts,
I am working on SP11 GRC 10.0.
In BRM, after following all necessry steps for role creation, when I enter last stage "Role Generation" and try to generate it, I am getting error "Illegal Tcodes (system name)" as shown in below screenshot.
I am adding SAP standard t-codes only (e.g. SU53) which are existing in the backend system but still it throws error.
Your suggestion is highly appreciated.

Hi Swati,
Thanks for your reply.
I had already applied note: 1066687 but it didn't resolve my issue.
Note: 1441463 is valid till release 720 and I am on release 731 and SP11.
Thanks
Jayesh

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

MEMASSIN TCode, Error Message, Default values??

Hello SAPients!
I'm an ABAP Developer, I don't know much about MM configuration but I have to solve this problem: We are using MEMASSIN TCode to massively update the Purchasing Info Records the problem is that in the end the system shows this error message "Enter a min. order qty. that is less than the standard order qty." and the Info Record is not updated, if I use ME12 I can see that the Min. Order Qty is defaulted to 10000 and the Standard Order Qty. is defaulted to 1, so, apparently it is correct for the system to trigger that error.
My question would be, Where are ME12 and MEMASSIN TCodes taking the default values from? How can I change those default values to something that allows MEMASSIN to update the Info Records correctly?
Thanks in advance for your kind help.

MEMASSIN and ME12 are both change transactions, so the values are just the values that are already entered.
You should be able to see them in table EINE.
I dont know how you loaded/entered the info records...
Maybe it was loaded with own programs and these fields were not validated at that time, or it was a warning message that was turned into an error message after that info record was created.
The question is just: what do you want to do?
do you want it leave this way, or do you want to correct the standard order quantity to be at lease equal to the minimum order quantity.
If you want to leave it wrong and just mass change other fields, then you have to make the error message a warning only.
If yo want to correct the quantity, then you can do this directly in MEMASSIN.
You said you are an ABAPer, so it should be easy for you to populate a new standard value with a small coding, which can be entered behind when you click formula icon

Transaction iView( Tcode) Error: Function call in SAP GUI with errors

Hey Guys:
I use Transaction iView to show the ABAP application on Portal. The application works to import data from client to BW. After I fill all the information and execute the application, the system returns the error message " Function call in SAP GUI with errors".
The ABAP application works fine on SAP GUI, so it should not be the program problem.
Any Suggestion for this will be nice. Thanks for your help.

Hey Duy:
Thanks for your response. I check the servers which i have access, and all of them cannot work correctly.
First, other iViews(Dynpro,BW Report,BSP,KM...) work fine.
Second, our backend system is a BW server.
I try to do so on our EP production and development, also connect them to our BW production and development servers. All of those are failed and have the same problem.
The t-code comes from our abap program and register on BW server, and hte program works fine when I use SE38 to execute it.
PS. The Transaction iView works fine before, but I have no idea why it just crash now.
Please let me know if you have any suggestion about this.

DB12 TCODE ERROR

Hi All
We took every day backup using sapdba in OS level in our SAP R/3 development server . But if i go t-code db12 it shows one of the message as i mentioning below .
The redo log files created during the yet been archived using BRARCHIVE They are needed for a complete recovery
Kindly suggest me . What i have to do ?
Regards
Selvan

Hi,
If you have taken complete backup using sapdba , then there is no need to take any backup . This should be sufficient for restore.
For this message , please paste the complete log in db12.
Thanks
Prasanna

Solman_setup is not working

hi Gurus,
Solman_setup tcode is not working. I have set the below parameters.
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = host name
icm/server_port_1 = PROT=SMTP,PORT = 25$$0
login/no_automatic_user_sapstar = 0
icm/conn_timeout = 20000
icm/keep_alive_timeout = 240
SAPLOCALHOSTFULL = host name
The error is like this
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Sat Aug 14 12:04:38 2010
Module: icxxthr.c
Line: 2698
Server: chnmct211397d_SM2_02
Error Tag: {-}
Detail: Connection to partner timed out after 240s
please help me

Hi Lata,
I hope u haven't executed the SAP Load generator(SGEN) even once. Actually what happens in ur case is that, the system tries to load the SolMan_Setup transaction in a web browser and it is not able to load that within 240s as mentioned in the parameter icm/keep_alive_timeout. So the session gets terminated(timed out).
icm/keep_alive_timeout = 240
Increase the value of this parameter using the tcode RZ10 (In our case I've set this as 600) and restart the SAP instance once and then try to execute the tcode solman_setup once again.
Also make sure that the value of the following are FQHN (hostname.domain).
icm/host_name_full = host name
SAPLOCALHOSTFULL = host name
Regards,
Varadharajan M

I am getting error while saving new WORKFLOW

Dear All,
Please help me for the following issue.
I am trying to make new WORKFLOW but system gives a ERROR while saving from SWDD tcode.
error is:
System error: Function cancelled
Message no. WD255
Regards,
Mukesh

Hi Mukesh,
You have to maintain the Prefix numbers in the system, in tcode SWU3 --> maintain definition environment --> Maintain prefix number --- > click on execute button.
There, create a new value for your client(XXX) system to generate the workflow definition / task definition.
Regards,
Murali Krishna.

Solman_setup and maintenance optimizer configuration

Hi
We've newly installed Solution Manager 7.0 EHP1 and we want to configure maintenance optimizer for approving SP. Is it mandatory to use solman_setup tcode or can we configure maintenance optimizer via tcode solution_manager and smsy.
Best Regards...

Hi
IT better if u use Solman_setup because it will run a wizard and do the needful and in a proper manner but still if u are expert and have already done the setting in previous version then u can it urslf.
Go through the links to know more about this solman_setup wizard settings.
New Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700001927282008E
Demo on Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it will help ur more
Regards
Prakhar

Result of prerequisite check cannot be analysed -SOLMAN_SETUP

We are on solution manager EHP1 SP 19 and when we run Diagnostics prerequisites via SOLMAN_SETUP,following error is displayed "result of prerequisite check cannot be analysed" .Display shows no information.Kindly help.
Note : SAP note :1309758 has already been applied in our system.
Regards
Shailaja

Hi,
Check this:
SAP Note: 1277258,1379051.
Rajeev

Update was terminated when trying to issue print output using VL02N tcode

Hi friends,
I am getting follwing error when trying to issue print output using VL02N tcode:
Error: Update was terminated.
When seen in SM13 i saw following info for function module RV_MESSAGE_UPDATE,which was showing error:
Error Info: MC 601: Object requested is currently locked by user RAMU.
When seen in SM12,i don't find any lock by above user RAMU(which is my user id itself).
I request please give me some inputs on how to avoid this error.
Thanks & Regards
Seshagiri

Hi Nam,
This probelm is becuase you are trying to enter a record for which primary key already exists in the table.
The insertion you are doing with a set of values which already exist and sap is getting this error that the "Duplicate record during insertion". try to check your insertion values and through se16 check if they already exist in the table mkpf.
To rectify the data or else change the table and add one more unique to the primary key.
Abhishek Purwar
http://abhishek.purwar.googlepages.com

Provisioning Allowed and Allow Auto-provisioning YES Role exists No

Hello,
I am unable to select the roles while submitting the user provisioning request.
The role additional details are set Yes for Provisioning Allowed and Allow Auto-provisioning
But Role exists is showing No; i have tried updating the roles in many ways, everything is getting updated except this paricular field.
Could you pls help me ...
Regards,
Sumanth

Hello Sumanth,
Can you successfully generate roles using the role generation option?
I have the same issue but I presently have issues with generating single roles ONLY as posted on this thread - "Illegal tcodes" error during the role generation phase of ERM in AC10
...so I am thinking it is becuase I can't generate single roles that is why the roles are not displaying. However, I can view the roles in other environments like risk analysis but not at the point of access request provisioning. It tells me no roles are available.
I sure hope someone will be able to help us out.
Thanks

Solution Manager implementation sequence

Hi Experts,
Need some quick advice, please
I am done with my Solution Manager 7.0 ehp1 Installation, Post Installation activity. Further so far I have configured the SAP ROUTER.
Now, could you please let me know in what sequence are the following to be taken up
1. Connecting Satellite systems with Solution Manager System.
2. Initial/Basic & Managed System Configuration
3. Maintenance Optimizer Configuration
4. Service Desk and EWA Configuration
Kindly let me know whats the sequence I should be following and also if I have missed something important please point it out.
Many Thanks in Advance..

Hi
Simply run Solman_setup tcode and just follow the steps
https://websmp106.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000066952009E
it is wizard in which you first do initial or basic setup
followed by managed system and other config
so in short your sequence will be automatically guided by this transaction
later you can configure EWA and service desk
hope it ans ur query
regards
prakhar

EWA Session does not appear

Hi all,
I've installed SolMan 7.0 EHP1 and complete the initial and basic configuration using SOLMAN_SETUP tcode.
Then I connect a satellite system with SMSY tcode and setup the EWA configuration.
Now I want to create a EWA Report manually but when I run the REFRESH_SESSION from SDCCN tcode on satellite system the EarlyWatch Alert for Solution Manager Session does not appear.
Could you please help me?
Thanks in advanced
Moreno

1. Did you setuo EWA in SOLMAN for that satelitte System? DSWP->Select the solution->Operations Setup->Solution Monitoring->Early Watch Alert->Setup Early Watch Alert.
2. If you have done this, then goto DSWP->Select the solution->Operations->Solution Monitoring->Early Watch Alert->Just click on the scheduled EWA. It will tell you why the session data is not collected from satelitte system though you ran REFRESH_SESSION at satelitte system.
OR
3. Check whether EWA is active at solman for that solution(Satelitte System).
DSWP->Settings->Solution Monitoring->Early Watch Alert
4. Check maintenace package and EWA is scheduled after you ran REFRESH_SESSION at satellite system(SDCCN), if so, then select the maintance package->click on details button(right side of the screen). Make sure that "Target RFC Destination" under Target System should be Back RFC of Solution Manager.
Hope this may help you.
Regards
Sanjai

SOLMAN_SETUP tcode error

Similar Messages

Maybe you are looking for