Solution for sending/receiving multiple accounts via Mail and web Gmail

I don't know why I haven't seen this before, especially since I've posted about this with no solutions, but I just discovered I can now do the following:
I have multiple email accounts from multiple domain names, and can send and receive from all accounts through Apple Mail as well as only one Gmail web client.
At the gmail.com web client, I go to Settings: Accounts and Import and click on Send mail from another address. I fill in the obvious info for each email account I want to add, choose 'Send through Gmail', and follow instructions to verify.
At the Apple Mail client, after configuring my Gmail account (instructions on how to do this are all over the web), I go to Preferences: choose the Gmail account: Account Information: Email Address and add in all the email addresses I want to use separated by commas (ie [email protected], [email protected], [email protected])
Now when I send to or from any of these emails, it sends and receives with the correct From: and To: emails, as well as replies to the correct emails.
As for the iPhone, I just add accounts for each of the emails I want to send from and put in wrong info for the incoming mail (ignoring the initial 'can't connect' pop-ups). I receive all mail just fine and can send.
Again, this didn't work a few months ago, but it does now. Maybe I'm missing something without realizing it yet.

godaddy accounts sometimes like port 80 vs 587 as well. just to piggy back on your thread.

Similar Messages

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Better management of multiple accounts on Mail.app

When using multiple accounts on Mail.app, it is possible to have different colors for each account, so that it is easier to avoid sending email from the wrong account?

You're undoubtedly better off to set the mail on the server to forward to your central account, and only maintain one account in Mail. Trying to set up rules in Mail to download mail and then forward it is just going to become cumbersome, and runs the risk of creating some kind of infinite mail loop. (For example, someone sends something to one address, it gets forwarded but for some reason your primary account's mailbox is full. The other address gets the bounce notification and forwards it back to the primary, which generates another bounce... you see where this is going, I'm sure.

This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
Please guide me how I can achieve this requirement.

Hi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
.    ResultLine   (1..1)
Mapping:
=>   ResultLine1
       ResultLine2
       ResultLine........          => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk

Send Crystal Report publication via mail dynamically

Hi!
I want to achieve the following scenario:
I have a Crystal Report within my BOE 3.1 system. Is it possible to trigger an event from an external system which indicates that the report on my server gets executed and will be sent to a specified user via email?
I'm thinking of some kind of solution like OpenDocument - where I access the report via an URL, pass parameters to it, and the executed report will be displayed on the users screen. Now, I don't want to display the report on the user's screen, I want to send it to him via mail.
Has anyone ever tried to implement such a kind of scenario? Does BOE offer web services which might help me to achieve my scenario?
thank you,
Dominik

Hi Dominik,
Yes, that is something that you can do using the SDK.
The idea is that when your user clicks on the button, it will generate a new schedule to run now and with email destination.
There are few examples in the SDK. You can start with this KB:
1203257 - How to schedule a Web Intelligence document with prompts using the Enterprise Java SDK
The main URL with SDK Documentation is:
http://www.sdn.sap.com/irj/sdn/bi-sdklibrary
One of the first things you have to know is to choose the right SDK for your project. You will find a quick approach in the following links:
http://devlibrary.businessobjects.com/BusinessObjectsXI3/en/diagrams/bosdks_overview_121_en.pdf
and
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7
Because you are thinking to do something related with scheduling you should focus in the Enterprise SDK.
http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/a09374f5-a982-2b10-0297-85c67690b4f2
A collection of samples can be found here:
http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaBusinessObjectsEnterpriseSDKSamples#JavaBusinessObjectsEnterpriseSDKSamples-Scheduling
And a specific sample to run now and schedule:
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/405a1725-4b57-2c10-928e-c25c34a5cf43
You will also find valuable information at see the following links:
Our java wiki:
http://wiki.sdn.sap.com/wiki/display/Java/JavaDevelopmentHome
Our SDK external forum:
http://forums.sdn.sap.com/
I hope this helps you,
Julian

Hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail

hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail
New mail that I want is [email protected]
Alternative to the Old one

From King Penguin
If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Multiple account in mail mail id

How can i remove Multiple accounts in mail mail id?

Signatures must be created for each account. If you create one sig in one account and a second in the other account, then each account has only one signature. You need to create the signatures you want independently in each account.

How can I rearrange IMAP folders with multiple accounts in Mail?

Hi all,
I switched to the Mac in 2004, but I've never really used Mail (been using Entourage). I set up an IMAP account in Mail, and was very impressed. So I decided to set up my other IMAP account, too. Now things are a bit messed up. I have these folders
Inbox
Drafts
Sent
Junk
Trash
Email1
Email2
Under Email1 and Email2 are all the IMAP folders for the respective email address, except Inbox, Drafts, Sent, Junk and Trash are separate, and each of those folders has a folder in it called Email1 and one called Email2. How can I change this so that I just ahve the Email1 and Email2 folders, and everything appears under those?
On a less important note, is there any way to make Mail ignore IMAP folders? My email server creates a folder called '.mailboxes' for each IMAP account, and just stores some of its information in there, nothing I want in Mail. So is there a way I can hide this .mailboxes folder?
Thanks in advance

Hi mr max pie whatever.
This is actually one of Mail’s best features and cannot be changed.
Instead of grouping mailboxes by account, Mail groups them by purpose first (and uses the account name to differentiate the individual mailboxes associated with each account), then groups by account the remaining mailboxes that don’t belong to any of the standard groups.
This has the advantage of letting you choose at any time, and independently for each mailbox type, whether you want to look at your Inbox, Sent, Trash, etc. mailboxes as if you had just one of them shared by all accounts (i.e. an aggregate), or look at each of the corresponding individual mailboxes separately.
As to the “.mailboxes” folder that you’d rather not see there, I believe Mail shouldn’t show it if the name begins with a period. Moreover, I’ve troubleshooted a few cases where the problem was the opposite, i.e. the user had renamed a mailbox with a leading period and it became inaccessible as a result. I don’t know why Mail behaves so inconsistently in this regard. If all the server-stored mailboxes were subfolders of a parent folder, you could solve the problem by typing the name of the parent folder in Preferences > Accounts > Advanced > IMAP Path Prefix...

IDoc receiver AEE: Error "Configuration for Sender/Receiver Partner Number/Port is incorrect"

Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
Jens

Hi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh

TS3276 Is there a way to sync POP subfolders and download them for backup in Mail on my MBP? I tried syncing the account with Mail and only the Inbox downloads onto my computer.

Is there a way to sync POP subfolders and download them for backup in Mail on my MBP? I tried syncing the account with Mail and only the Inbox downloads onto my computer. I have Googled enough to find out that the answer is no, but no official answer or recent answer and I am hopeful that there has been a change.

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

TS4002 Cannot send/receive iCloud email with Mail

About a week ago I stopped being able to send/recieve icloud email via mail on my iMac. Everything is correct in my settings except the incoming server information. Mail defaults to p03-imap.mail.me.com, and will not let me select or edit this option. I know all my other settings work correctly because I can access iCloud email via my iPhone, iPad and a Windows 7 laptop running Thunderbird. However my iMac is my primary computer and I would like to get this issue corrected. Does anyone have any suggestions?

I am trying to determine the reason that the Mail program has stopped working with iCloud. All of my settings are correct, and have been verified as working with another application (Thunderbird), and work on hand held devices (iPhone and iPad), but will not work within Mail. The only thing I could find that didn't match the referenced online materials was the p03- portion of the IMAP server address. If you have any suggestions, I'm happy to listen to them.

An advanced solution for sending email from Solution Manager (or CRM)

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

How can i delete my gmail account from mail and add aol, how can i delete my gmail account from mail and add aol, how can i delete my gmail account from mail and add aol

how can i delete my gmail account from mail and add aol, how can i delete my gmail account from mail and add aol, how can i delete my gmail account from mail and add aol

Welcome to the Apple Support Communities
To delete a mail account in Mail, open Mail, and go to Mail menu > Preferences > Accounts. Then, select the account you want to remove and press the - button.
Then, press the + button to add the AOL mail account

Solution for sending/receiving multiple accounts via Mail and web Gmail

Similar Messages

Maybe you are looking for