Solved 2012 Server

SOLVED

Hi,
Could you provide more information about your environment. for example, the server version of the problem on, when you experience this issue what are you trying to do, when this problem occurs the system log record information, screenshots is the best
information.
More information:
Event Logs
http://technet.microsoft.com/en-us/library/cc722404.aspx
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Install Remote Desktop Services Failed on Windows 2012 Server

I understand RDS is not recommended on DC due to security consideration. However since I want to play it at home, it is not much a concern. Such scenario works fine on Windows 2008 R2. But on Windows 2012, the RDS (session-based, have not
tried VDI, but expect same result) installation always fails and is incomplete on DC.
In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager. The remote desktop service management service cannot be started (Error code: 0x88250001). Is there any extra configuration needed for RDS
working on Server 2012 DC or before the installation? Thanks.
Update: this issue has been solved in Windows 2012 R2 Server. According to
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
"Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker."
The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

Asinine. Simply Asinine. Microsoft took it out because of $GREED$.
RemoteDesktop has become so popular, they had to break it to make more money. Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's? SBS2011
had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony. It is an untrue statement then, that it was "allowed but not recommended"
Now you by Server2012 (core + two virtual) and its not enough for all this.
You need at least another $700 for another sever licence to have it all
and who knows if SQL will run on a DC, or Exchange, or R-DERP server. Another reacherous bridge to cross.
By far, the absloute worse release since Millennium. The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013. Problems with USB drivers and networking running extreamly slow.
Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running. It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond. Open wide and swallow - Mother Microsoft
knows whats best for you. YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA "METRO-SERVER"
Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC. ITS MY DC. And the cost savings versus the "risk" was
previously MY decision.
Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it. I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed. Restore from lastnights backup and forget about todays work. Not to mention it will probably take a half day to try
to fix it, then recover it then tell the 30 users they lost a days worth of work.
HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users.
Microsoft's solution, buy another server. Need Exchange? Buy another server or take the risky cheapskate route and spin up some VHD's. Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
chance of failure. With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
data from.
Screw server 2012 forever.
I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use. Its MS $GREED$ Grab the world by the B**ls and squeeze with all
your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage.
YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server.
Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month.
I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with. They get their apps, cannot install anything
and all these servers are running just fine behind the firewall and perfectly save. The track record of this combination is 100% stable and is up 24/7/365 with no problems. Do yourself a favor and throw this 2012 into the river, you don't need
any weights because it is LEAD and will sink to the bottom by itself.
Why, you ask? Official is "Its for your protection" The real reason? To sell you more $700 server licences.
Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse. One way or another, you are going to bleed.    A little each month to move to the cloud, or
a small fortune if you want to have it in house. Microsoft wants it to be more expensive to have in house. No more buying a server and running it for six years before you upgrade. They can't have in house servers competing with their cloud,
and small businesses are the low hanging fruit ripe for the pickin'.

Error Code (Windows 2012 server DataCenter Edition) :0xC004F069

When I am trying to activate windows 2012 server datacenter edition, an error message is showing. "the software licensing reported that the product SKU is not found". what is SKU?
how to solve this problem?

SKU = Stock Keeping Unit (an industry term, meaning the reference number for a unique specific part number or product identity)
-=-=-
from: http://technet.microsoft.com/en-us/library/cc303695.aspx
Error Code: 0xC004F066
Error Message: The Software Licensing Service reported that the product SKU is not found.
Activation Type: MAK/KMS client
Possible Cause: Volume media has been used with a non-Volume key.
Troubleshooting Steps:
- Match the product key to the OS edition.
- Contact the Product Activation Call Center for assistance.
-=-=-
This suggests that you are using an invalid combination of product key/installation media.
Check that you are using a "matched set", either Retail media with Retail key, or, Volume media with Volume key.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to Panic a Windows 2012 Server?

Hi Folks,
I was looking for instructions/steps/procedure to panic my Windows 2012 Server for a test I am currently running. Can someone please assist?
Thanks

This forum is for SQL related queries, please raise this with Windows forum.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=windowsserver
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Access denied in Windows 2012 Server Manager after a period of time working without problems

Hello,
I had 2 servers with windows 2012 installed in a domain (dc is in a 3rd server) and both added to server manager of each other. Both servers had Failover cluster installed and configured roles. After startup in both servers i can see the other and manage
it without problems (in server manager and failover cluster manages) but after a period of 30-40 minutes in both servers I see "Online - Data Retrieval failures Ocurred" for the partner server and "Online - Access Denied" for local server.
When I access de Failure Cluster Manager I had errors accessing resources and roles and can´t failover the cluster.
I removed the failover cluster thinking that could be the original problem, remove servers from domain, change names and add again to the domain without install failover cluster.
Now, the servers have not the failover cluster feature and the problem persists. 30-40 minutes after boot the server manager show messages of inaccesible partner with same messages. I tried to execute powershell commands to add a new ip to the NIC and I
receive a Access Denied Message and show Access Denied message in other events in log.
I´m using Domain Administrator Account and tried different solutions but not solved. I saw that this message can occur in a variety of different scenarios, but i don´t know why works during a period of time before failing. It´s frustrating
Regards
EDITED: in detail of Online - Data retrieval failures i see that: Configuration refresh failed with the following error: The metadata failed to be retrieved from the server, due to the following error: The WS-Management service cannot process the request.
The WMI provider returned an 'access denied' error.

Hi PabloVDL,
It seems is this two server has register the incorrect DNS, please try to add this server manage NIC IP to your manager hosts file or if possible trmpory disable the useless NIC DNS register. This issue also some times caused by when you installed
the HP insignth management, if in your environment you have this tools please temporarily uninstall it.
More information:
Windows Server 2012 - Server Manager Troubleshooting Guide, Part III: Common
Events and Errors in Server Manager
http://social.technet.microsoft.com/wiki/contents/articles/13445.windows-server-2012-server-manager-troubleshooting-guide-part-iii-common-events-and-errors-in-server-manager.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Why is it not possible to move a SCCM 2012 Server to a new Domain?

Hello everybody,
I know it is not supported to move a SCCM 2012 Server to a new Domain. But I am still missing why it is not supported or possible....
I could not find anything that explained it in detail on the forums/internet. So when the question comes up in front of a customer it is always better to have a good argumentation...Can somebody describe the reasons why??
Thank you very much in advance!

Have them call CSS then.
It's ultimately the result of the design of the product but not an explicit decision. To my knowledge, it relies on the domain name for certain things and this is explicitly embedded with no defined way to change this. Could it be changed? Probably.
But, that would take a lot of work and effort and is not something Microsoft has ever invested any time in.
The grass is green and the sky is blue. Knowing why doesn't change these.
Jason | http://blog.configmgrftw.com | @jasonsandys

Joining Windows 2012 Server to SBS 2011 Domain

Hi All,
I have been trying to get a new Windows 2012 Server to join a SBS 2011 domain. The error message I am getting is:
The following error occurred attempting to join the domain: xxxx. The specified domain does not exist or could not be contacted.
I have a bunch of other Windows 7/XP workstations that have joined successfully. I have also tried disabling TCP/IP v6 on the 2012 server and joining the domain with the netdom command. The SBS 2011 server is listed as the primary DNS server on the 2012
server.
What else can I try here?
Thanks,
DR.

I am having the same issue has the OP. I have my DNS settings pointing to the sbs server that hosts the domain and DNS. I am receiving the same error.
Server 2012 R2 Standard
SBS 2011 Essentials
Jerry T

Synchronization fails on Windows 2012 Server

Hello, Running DPM 2012 R2, Protected computer Windows 2012 Standard
I'm backing up only folders (19 GB) on a Windows 2012 server which also have SCCM 2012 installed on it. The initial replica and recovery point creations are successful. Any
scheduled synchronization job scheduled after will fail. The job display "In progress" but there is 0 MB data transferred and will remain in that stage for days until I cancel the job. A reboot of the protected server
resolves the issue temporarily where I might get a couple days of successful synchronization\recovery points but then the job will freeze again. I have looked in the event logs and the logs in Monitoring on the DPM server and also on the protected computer
but have not found any error that points to the cause. Has anyone seen this issue? Will be grateful if someone can point me in the right direction of troubleshooting this issue. Thank you.

Not seeing any errors that stands out. Here is the log from today's synchronization job that is hung.
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(2078) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::DoFailureCleanup [00000000028FD320]
2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
2B98 2A40 06/18 15:05:54.409 31 vsssnapshotrequestor.cpp(119) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::~CVssSnapshotRequestor [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(2044) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::CleanUp [00000000028FD320]
2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
I ran the VSSADMIN LIST WRITERS command after I cancelled the job and this is the returned message.
"Waiting for response.
These may be delayed if a shadow copy is prepared."

How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?

Hellos.
I have tried and failed to add my custom.dll into the Windows Server 2012 GAC.
We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
I cannot find gacutil.exe on the Windows 2012 Server.
I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
TIA
*HH

Well yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
However, the problem has been resolved. Powershell can be used to modify the assemblies.
I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
(My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
These powershell commands got me going...
PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
PS C:\temp>
PS C:\temp>
PS C:\temp> iisreset
Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1.

How to change the root domain name in window 2012 server

Got a window 2012 server build up. My root domain name looks something like corp.marketing Well I seems to have missed to add the last .com or .local. How do I add the .com to my existing root domain name please. The server is new, will
go online in few days time. Thanks for all the help.

I have a similar question and not sure if this is the right place. I had set a server with corp.brighterworld.com but the install wizard anywhere access had me believe that microsoft's strongly preferred domain name prefix was remote.brighterworld.com so
I contacted GoDaddy and had it reissued as remote. but when I went to reconfigure for the new name. I had already set the server for being a CA, and in that process it issued like 4 or 5 certificates. So I had tried to rebuild the machine from scratch, but
the it didn't wipe everything, but rather saved previous state which left the old certificate stuff to be dealt with. Any hints or help out here for us having to learn this stuff the hard way?
Thanks,
Mark Saxton

How do I turn off Hyper-V 2012 server sleep mode?

Just installed Hyper-V 2012 server on a HP ML360 G8. Also installed Corefig 1.1.1. It seems after about 10 minutes if idle time the monitor goes black and the unit goes into sleep or hibernation. I have used powercfg to set it to the High Performance
power scheme and set screensaver to none in Corefig.
When the monitor goes black, if I move the mouse the sconfig screen, corefig, etc windows do not show until I run the mouse over them. Even then the windows do not 'repaint' until I run the mouse over the whole window or make some kind of key stroke in each
window.
Worried what this will do to my VMs once I start building them and would like to see the screen at all times. This is the first 2012 box and I have never had this issue with any of the Core 2008 products.
Thanks

Hi,
“I can't locate the GUI you show, it's Hyper-V 2012 Server,so i can't edit the settings.
Sems like it may be the monitor itself is going to sleep”
The other possible is you don’t have the administrator rights, or your server has got the Power Management, after you configuration the power option, the GPO refresh then
the old configuration be covered. Please refer the following article to confirm that:
Power Policy Configuration and Deployment in Windows
http://msdn.microsoft.com/en-us/windows/hardware/gg463243.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installed the RDS 2012 Server License per user CAL (5pcs) after not allow over two users remote desktop connection problem

I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
Select a user disconnect so that you can sign in.
There are too many users signed in
User1 Active
User2 Active
() Force disconnect of the user

Hi,
In addition you can also refer following article for RDL configuration.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 SP1 client file lock on network share hosted ny WIndows 2012 Server

Hello
I have one strange problem after migration from Windows 2003 Server to Windows 2012 Server R2 Standard.
All migration tasks went well but two things do not work.
In Computer Management you have The Opened Files feature and if you open any file that is located on the network share hosted by Windows 2012 R2 form Windows 7 SP1 and then close it
it remains open in the Opened Files tab (even if you wait an hour). There is no problem with Windows XP SP3. The issue exist only with Windows 7.
The session view of sessions to the file server do not work. If I try to open it I get the message that the application is not responding.
Can someone help me with that ?
About the environment:
It is one server Domain migrated form 2003 to 2012R2.
The domain and forest level was raised to 2012 R2.
I have made clean install of Windows 2012 R2 and then migrated AD.
Best Regards
Sebastian Sala

Hi Sebastian,
>>There is no problem with Windows XP SP3. The issue exist only with Windows 7.
T>>he session view of sessions to the file server do not work. If I try to open it I get the message that the application is not responding.
Based on the description, please check event logs in Event Viewer to see if there were some related events logged. Besides, does this phenomenon happen all Windows 7 clients? We can try to restart the client to see if it helps.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 Client 'sees' an old version of windows 2012 server share

Hi All,
I have a problem which seems to be a common theme looking at other threads. Here's the overview of the problem:-
I have multiple windows 7 clients and a windows 8.1 client within a 2008 Server in a domain.
I also have a Windows 2012R2 Server which is not joined to the domain. There is a Share on the 2012R2 which has the Caching Option turned off. Everyone full control on Share & File permissions.
One of the Windows 7 machines in Explorer when it looks at
\\2012server\share sees an old version of the folder. It seems that SMB 2 chaching is working too well. Not even pressing F5 or clicking View, Refresh updates windows explorer.
It took a reboot to get the workstation to see the up to date contents of the share on the 2012 server.
We don't seem to have that behaviour with that client against the 2008 server.
I have seen this behaviour on another machine un-related to us at another location which was in a workgroup with a 2012 server and no domain.
Questions:-
Is there some sort of problem with Windows 7 workstations working against 2012 Servers in a non-domain setting or is it just Windows 7 against 2012 servers period?
I understand that Windows 7 utilises SMB1 & SMB2. SMB2 introduced caching. If the server has turned off the share cache option should the client cache the contents of the share or the information about the files & folders & 'file not found'
information?
I want to open a file handle to a file on a network share so I can read and write data to it. But I also want to know that when I look at the folder to open the file I'm actually looking at the live version of the folder and files in the folder and
not a cached version of the folder. If it's a cached version the file might be there already but I won't see it.
Is there an API call that tells the client to get a fresh view of the server share so I can be absolutely sure that when I look for a file on the server I'm getting the correct answer and not one from cache.
I first posted the question with the same subject "Windows 7 Client 'sees' an old version of windows 2012 server share" in the Windows 7 Networking Fourm
https://social.technet.microsoft.com/Forums/en-US/23bf3627-987b-4c27-8062-85a284a2cda4/windows-7-client-sees-an-old-version-of-windows-2012-server-share?forum=w7itpronetworking and it was suggested I repost in here. Please do take the time to read
the thread which will save time with suggestions that have already been covered.
As the computers that can be affected by this problem are not mine I cannot enforce or guarantee that any of my 'client base' will apply any hotfixes. I will also not have the ability to tweak registry settings as I can't guarantee Admin Access.
It seems that we need to go back to SMB1 as all the tweaks to SMB since those days have introduced problems with the basic requirement of sharing files from a share on a server for Read/Write purposes. I have tried turning a network back to SMB1 and that
has resolved a lot of the issues but then I found a post/MS blog that states not to leave the network on SMB1
The Caching option of the share had already been turned off. Surely Windows clients should not cache any information about the share but I think that is not the case.
Thanks is advance
Robert

Hi Shaon,
Thanks for looking into this.
If this is a known issue, why isn't the hotfix rolled into a general windows update if this is a known problem? However this doesn't just affect domain joined workstations.
Surely it's basic functionality for a networked computer to access files and folders on a network file server. It's what networks were invented for at the end of the day.
I am unable to apply hotfixes to these computers that are having the problem due to the fact they are not mine but my customers.
At one of my customers sites I disabled SMB2 from the server and network clients as well as disabling the network adapter power saving option. This seemed to resolve the issues that I saw on one client that seemed to be 30 minutes behind the rest of
the network. The hotfix you link to states that it is for Domain joined computers. At my customer site the PC's are not in a domain at all, just a workgroup with workstations and a 2012r2 server. Will the hotfix be applicable to non-domain machines?
Also many clients seemed to loose the file handle to an open file on the server. I'll get them to turn SMB2 back on at some point after I send out some updates but all the problems I see seem to be caused by the caching functions in SMB2. SMB1 is good and
stable. It's SMB2 that seems to be causing the problems as it was designed from the ground up for caching.
Has this networking issue been resolved in Windows 8, 8.1 and 10?
As I am unable to apply a hotfix to 1000's of PC's that are not mine, is there an API call or something where I can get the windows client to stop lying and get me the current state of a folder on the server?
Will Turning off ClientSideCaching fix the issue? HKLM\SYSTEM\CurrentControlSet\Services\MrxSmb\Parameters\
CSCEnabled
Or will every machine need to be tuned individually according to the following guide:-
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN ?
Robert

Solved 2012 Server

Similar Messages

Maybe you are looking for