[Solved: Apache fault] Very very long shutdown
Hello Archers.
After completely reinstalling my laptop, I faced a problem with the shutdown process. It hangs almost 1 minute, which seems very long to me.
Looking the output of journalctl, I noticed the problem seems to come from NetworkManager and/or dbus (see the output below, between 16:41:46 and 16:42:24).
Here the output of "journalctl -b -1 -r", only after asking the system to shutdown:
mars 03 16:42:25 ArchLinux systemd-journal[163]: Journal stopped
mars 03 16:42:25 ArchLinux kernel: watchdog watchdog0: watchdog did not stop!
mars 03 16:42:25 ArchLinux systemd[1]: Set hardware watchdog to 10min.
mars 03 16:42:25 ArchLinux systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
mars 03 16:42:25 ArchLinux systemd[1]: Shutting down.
mars 03 16:42:25 ArchLinux systemd[1]: Starting Reboot...
mars 03 16:42:25 ArchLinux systemd[1]: Reached target Final Step.
mars 03 16:42:25 ArchLinux systemd[1]: Starting Final Step.
mars 03 16:42:25 ArchLinux systemd[1]: Reached target Unmount All Filesystems.
mars 03 16:42:25 ArchLinux systemd[1]: Starting Unmount All Filesystems.
mars 03 16:42:25 ArchLinux systemd[1]: Failed unmounting Temporary Directory.
mars 03 16:42:25 ArchLinux systemd[1]: tmp.mount mount process exited, code=exited status=32
mars 03 16:42:25 ArchLinux systemd[1]: Deactivated swap /dev/sda3.
mars 03 16:42:25 ArchLinux systemd[1]: Deactivated swap /dev/disk/by-uuid/69563f44-d300-4365-b454-beac28eae2c6.
mars 03 16:42:25 ArchLinux systemd[1]: Deactivated swap /dev/disk/by-id/ata-OCZ-VERTEX4_OCZ-241I8O3QO62H8453-part3.
mars 03 16:42:25 ArchLinux systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x5e83a97da2be91d1-part3.
mars 03 16:42:25 ArchLinux umount[10668]: [61B blob data]
mars 03 16:42:25 ArchLinux umount[10668]: (Dans certains cas, des renseignements sur les processus utilisant
mars 03 16:42:25 ArchLinux umount[10668]: [30B blob data]
mars 03 16:42:25 ArchLinux systemd[1]: Reached target Shutdown.
mars 03 16:42:25 ArchLinux systemd[1]: Starting Shutdown.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Remount Root and Kernel File Systems.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Remount Root and Kernel File Systems...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Local File Systems (Pre).
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Local File Systems (Pre).
mars 03 16:42:25 ArchLinux systemd[1]: Failed unmounting /home.
mars 03 16:42:25 ArchLinux systemd[1]: home.mount mount process exited, code=exited status=32
mars 03 16:42:25 ArchLinux umount[10667]: [61B blob data]
mars 03 16:42:25 ArchLinux umount[10667]: (Dans certains cas, des renseignements sur les processus utilisant
mars 03 16:42:25 ArchLinux umount[10667]: [31B blob data]
mars 03 16:42:25 ArchLinux systemd[1]: Unmounting Temporary Directory...
mars 03 16:42:25 ArchLinux systemd[1]: Unmounting /home...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Local File Systems.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Local File Systems.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Recreate Volatile Files and Directories.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Recreate Volatile Files and Directories...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Update UTMP about System Reboot/Shutdown.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Load/Save Random Seed.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Load/Save Screen Backlight Brightness of acpi_video1.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Load/Save Screen Backlight Brightness of acpi_video0.
mars 03 16:42:25 ArchLinux systemd[1]: Deactivating swap /dev/sda3...
mars 03 16:42:25 ArchLinux systemd[1]: Deactivating swap /dev/sda3...
mars 03 16:42:25 ArchLinux systemd[1]: Deactivating swap /dev/sda3...
mars 03 16:42:25 ArchLinux systemd[1]: Deactivating swap /dev/sda3...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Swap.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Swap.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Update UTMP about System Reboot/Shutdown...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Apply Kernel Variables.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Apply Kernel Variables...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Encrypted Volumes.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Encrypted Volumes.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Load/Save Random Seed...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Setup Virtual Console.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Setup Virtual Console...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Set Up Additional Binary Formats.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Set Up Additional Binary Formats...
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Load/Save Screen Backlight Brightness of acpi_video1...
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Load/Save Screen Backlight Brightness of acpi_video0...
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target System Initialization.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping System Initialization.
mars 03 16:42:25 ArchLinux systemd[1]: Closed D-Bus System Message Bus Socket.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping D-Bus System Message Bus Socket.
mars 03 16:42:25 ArchLinux systemd[1]: Closed LVM2 metadata daemon socket.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping LVM2 metadata daemon socket.
mars 03 16:42:25 ArchLinux systemd[1]: Closed Device-mapper event daemon FIFOs.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Device-mapper event daemon FIFOs.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Sockets.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Sockets.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Daily Cleanup of Temporary Directories.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Daily Cleanup of Temporary Directories.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Timers.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Timers.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Paths.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Paths.
mars 03 16:42:25 ArchLinux systemd[1]: Removed slice User and Session Slice.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping User and Session Slice.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Slices.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Slices.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped target Basic System.
mars 03 16:42:25 ArchLinux systemd[1]: Stopping Basic System.
mars 03 16:42:25 ArchLinux systemd[1]: Stopped Network Manager.
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> exiting (success)
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> Removing DNS information from /usr/bin/resolvconf
mars 03 16:42:25 ArchLinux NetworkManager[436]: <error> [1393861345.204404] [nm-dispatcher.c:285] _dispatcher_call(): could not get dispatcher proxy!
mars 03 16:42:25 ArchLinux NetworkManager[436]: dbus_g_proxy_new_for_name: assertion 'connection != NULL' failed
mars 03 16:42:25 ArchLinux NetworkManager[436]: dbus_g_proxy_call_no_reply: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 03 16:42:25 ArchLinux NetworkManager[436]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> NetworkManager state is now DISCONNECTED
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> (wlp8s0): taking down device.
mars 03 16:42:25 ArchLinux NetworkManager[436]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> (wlp8s0): cleaning up...
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> Removing DNS information from /usr/bin/resolvconf
mars 03 16:42:25 ArchLinux NetworkManager[436]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 03 16:42:25 ArchLinux NetworkManager[436]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 03 16:42:25 ArchLinux NetworkManager[436]: <info> (wlp8s0): canceled DHCP transaction, DHCP client pid 977
mars 03 16:42:24 ArchLinux dhcpcd[977]: exited
mars 03 16:42:24 ArchLinux dhcpcd[977]: wlp8s0: removing interface
mars 03 16:42:24 ArchLinux dhcpcd[977]: received SIGTERM from PID 436, stopping
mars 03 16:42:24 ArchLinux NetworkManager[436]: <info> (wlp8s0): deactivating device (reason 'removed') [36]
mars 03 16:42:24 ArchLinux NetworkManager[436]: <info> (wlp8s0): device state change: activated -> unmanaged (reason 'removed') [100 10 36]
mars 03 16:42:24 ArchLinux NetworkManager[436]: <info> (enp7s0): taking down device.
mars 03 16:42:24 ArchLinux NetworkManager[436]: <info> (enp7s0): cleaning up...
mars 03 16:42:24 ArchLinux NetworkManager[436]: <info> (enp7s0): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
mars 03 16:42:24 ArchLinux NetworkManager[436]: <info> caught signal 15, shutting down normally.
mars 03 16:42:24 ArchLinux systemd[1]: Stopping Network Manager...
mars 03 16:42:24 ArchLinux systemd[1]: Stopped target Network.
mars 03 16:42:24 ArchLinux systemd[1]: Stopping Network.
mars 03 16:42:24 ArchLinux systemd[1]: Stopped target Remote File Systems.
mars 03 16:42:24 ArchLinux systemd[1]: Stopping Remote File Systems.
mars 03 16:42:24 ArchLinux systemd[1]: Stopped Apache Web Server.
mars 03 16:42:24 ArchLinux apachectl[10520]: httpd: Could not reliably determine the server's fully qualified domain name, using fe80::6a5d:43ff:fe22:4b3d for ServerName
mars 03 16:42:24 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:21 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:18 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:15 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:13 ArchLinux NetworkManager[436]: dbus_g_proxy_begin_call_with_timeout: assertion 'DBUS_IS_G_PROXY (proxy)' failed
mars 03 16:42:13 ArchLinux NetworkManager[436]: dbus_g_proxy_new_for_name: assertion 'connection != NULL' failed
mars 03 16:42:12 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:09 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:06 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:03 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:42:00 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:41:57 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:41:54 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:41:51 ArchLinux NetworkManager[436]: [241B blob data]
mars 03 16:41:49 ArchLinux NetworkManager[436]: <info> (wlp8s0): roamed from BSSID C0:D9:62:8D:F4:C1 (Movellan) to (none) ((none))
mars 03 16:41:48 ArchLinux NetworkManager[436]: <error> [1393861308.226890] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
mars 03 16:41:46 ArchLinux gdm[321]: GLib-GObject: g_object_unref: assertion 'object->ref_count > 0' failed
mars 03 16:41:45 ArchLinux systemd[1]: Stopped MariaDB database server.
mars 03 16:41:45 ArchLinux mysqld[311]: 140303 16:41:45 [Note] /usr/bin/mysqld: Shutdown complete
mars 03 16:41:45 ArchLinux mysqld[311]: 140303 16:41:45 InnoDB: Shutdown completed; log sequence number 1648952
mars 03 16:41:45 ArchLinux systemd[1]: Stopped Bumblebee C Daemon.
mars 03 16:41:44 ArchLinux gnome-session[1016]: [115B blob data]
mars 03 16:41:44 ArchLinux gnome-session[1016]: (gnome-shell:10452): Clutter-WARNING **: ./clutter-actor.c:9814: Actor 'StIMText' tried to allocate a size of -54,00 x 17,00
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Login Service.
mars 03 16:41:44 ArchLinux systemd[1]: Started Generate shutdown-ramfs.
mars 03 16:41:44 ArchLinux mkinitcpio[10539]: ==> Build complete.
mars 03 16:41:44 ArchLinux gnome-session[1016]: asyncCallback@/usr/share/gjs-1.0/overrides/Gio.js:91
mars 03 16:41:44 ArchLinux gnome-session[1016]: LoginManagerSystemd<.getCurrentSessionProxy/<@/usr/share/gnome-shell/js/misc/loginManager.js:146
mars 03 16:41:44 ArchLinux gnome-session[1016]: @/usr/share/gjs-1.0/overrides/Gio.js:209
mars 03 16:41:44 ArchLinux gnome-session[1016]: klass[method]@/usr/share/gjs-1.0/overrides/Gio.js:250
mars 03 16:41:44 ArchLinux gnome-session[1016]: [164B blob data]
mars 03 16:41:44 ArchLinux gnome-session[1016]: [107B blob data]
mars 03 16:41:44 ArchLinux gnome-session[1016]: [107B blob data]
mars 03 16:41:44 ArchLinux gnome-session[1016]: OK
mars 03 16:41:44 ArchLinux gnome-session[1016]: [32B blob data]
mars 03 16:41:44 ArchLinux gnome-session[1016]: Gjs-Message: JS LOG: GNOME Shell started at Mon Mar 03 2014 16:41:44 GMT+0100 (CET)
mars 03 16:41:44 ArchLinux gnome-session[1016]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux gnome-session[1016]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux gnome-session[1016]: ** (zeitgeist-datahub:1205): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
mars 03 16:41:44 ArchLinux gnome-session[1016]: (nm-applet:1245): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux gnome-session[1016]: (firewall-applet:1213): Gdk-WARNING **: firewall-applet: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux gnome-session[1016]: (variety:1229): Gdk-WARNING **: variety: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux gnome-session[1016]: devilspie: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
mars 03 16:41:44 ArchLinux gnome-session[1016]: dropbox: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux mkinitcpio[10539]: -> Running build hook: [sd-shutdown]
mars 03 16:41:44 ArchLinux mkinitcpio[10539]: ==> Starting build: none
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Permit User Sessions.
mars 03 16:41:44 ArchLinux gnome-session[1016]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.gtk.vfs.Daemon[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux kernel: bbswitch: enabling discrete graphics
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-TERMINATING
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-DISCONNECTED bssid=c0:d9:62:8d:f4:c1 reason=3 locally_generated=1
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux systemd[1]: Unmounted /run/user/1000/gvfs.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Permit User Sessions...
mars 03 16:41:44 ArchLinux systemd[1]: Removed slice user-1000.slice.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping user-1000.slice.
mars 03 16:41:44 ArchLinux systemd[1]: Started Store Sound Card State.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Disk Manager.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped WPA supplicant.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped User Manager for 1000.
mars 03 16:41:44 ArchLinux gnome-session[1016]: (tracker-miner-fs:1208): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
mars 03 16:41:44 ArchLinux org.gtk.vfs.Daemon[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux gdm[321]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux kernel: cfg80211: Calling CRDA to update world regulatory domain
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: nl80211: send_and_recv->nl_recvmsgs failed: -33
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-CONNECTED - Connection to c0:d9:62:8d:f4:c1 completed [id=0 id_str=]
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: WPA: Key negotiation completed with c0:d9:62:8d:f4:c1 [PTK=CCMP GTK=CCMP]
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: Associated with c0:d9:62:8d:f4:c1
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: Trying to associate with c0:d9:62:8d:f4:c1 (SSID='Movellan' freq=2412 MHz)
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: SME: Trying to authenticate with c0:d9:62:8d:f4:c1 (SSID='Movellan' freq=2412 MHz)
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: CTRL-EVENT-SCAN-STARTED
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: wlp8s0: Reject scan trigger since one is already pending
mars 03 16:41:44 ArchLinux wpa_supplicant[735]: Successfully initialized wpa_supplicant
mars 03 16:41:44 ArchLinux org.freedesktop.secrets[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.freedesktop.secrets[1038]: GNOME_KEYRING_PID=10508
mars 03 16:41:44 ArchLinux org.freedesktop.secrets[1038]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring-Te5yjj
mars 03 16:41:44 ArchLinux org.gnome.seahorse.Application[1038]: (seahorse:10475): Gdk-WARNING **: seahorse: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux org.gnome.Bijiben.SearchProvider[1038]: (bijiben-shell-search-provider:10471): Gdk-WARNING **: bijiben-shell-search-provider: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux ca.desrt.dconf[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.a11y.atspi.Registry[1047]: after 945 requests (945 known processed) with 0 events remaining.
mars 03 16:41:44 ArchLinux org.a11y.atspi.Registry[1047]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
mars 03 16:41:44 ArchLinux org.gnome.Weather.Application[1038]: (org.gnome.Weather.Application:10473): Gdk-WARNING **: org.gnome.Weather.Application: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux org.gnome.ControlCenter.SearchProvider[1038]: (org.gnome.ControlCenter.SearchProvider:10467): Gdk-WARNING **: org.gnome.ControlCenter.SearchProvider: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux org.gnome.zeitgeist.Engine[1038]: [15:41:44.591553 WARNING] zeitgeist-daemon.vala:449: The connection is closed
mars 03 16:41:44 ArchLinux org.gnome.Nautilus.SearchProvider[1038]: (nautilus:10469): Gdk-WARNING **: nautilus: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux org.gnome.OnlineAccounts[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.gnome.OnlineAccounts[1038]: 16:41:44.589:[1509]:[DEBUG]: GoaIdentityService: Lost name org.gnome.Identity [goaidentityservice.c:1744, on_name_lost()]
mars 03 16:41:44 ArchLinux org.gnome.OnlineAccounts[1038]: 16:41:44.589:[1509]:[INFO]: Lost (or failed to acquire) the name org.gnome.OnlineAccounts on the session message bus [main.c:68, on_name_lost()]
mars 03 16:41:44 ArchLinux org.a11y.Bus[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.gnome.zeitgeist.Engine[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux NetworkManager[436]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.gtk.Private.UDisks2VolumeMonitor[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.gtk.Private.UDisks2VolumeMonitor[1038]: ### debug: Name owner ':1.101' vanished
mars 03 16:41:44 ArchLinux org.gtk.Private.UDisks2VolumeMonitor[1038]: ### debug: Name owner ':1.95' vanished
mars 03 16:41:44 ArchLinux org.gtk.Private.UDisks2VolumeMonitor[1038]: ### debug: Name owner ':1.28' vanished
mars 03 16:41:44 ArchLinux org.gtk.Private.UDisks2VolumeMonitor[1038]: ### debug: Name owner ':1.35' vanished
mars 03 16:41:44 ArchLinux org.freedesktop.Telepathy.AccountManager[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux bumblebeed[314]: [ 4657.358988] [WARN]Received Terminated signal.
mars 03 16:41:44 ArchLinux gnome-session[1016]: (terra:1242): Gdk-WARNING **: terra: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.
mars 03 16:41:44 ArchLinux org.gtk.vfs.Daemon[1038]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
mars 03 16:41:44 ArchLinux org.gtk.vfs.Daemon[1038]: A connection to the bus can't be made
mars 03 16:41:44 ArchLinux gdm[321]: GLib-GObject: g_object_ref: assertion 'object->ref_count > 0' failed
mars 03 16:41:44 ArchLinux mysqld[311]: 140303 16:41:44 InnoDB: Starting shutdown...
mars 03 16:41:44 ArchLinux mysqld[311]: 140303 16:41:44 [Note] Event Scheduler: Purging the queue. 0 events
mars 03 16:41:44 ArchLinux mysqld[311]: 140303 16:41:44 [Note] /usr/bin/mysqld: Normal shutdown
mars 03 16:41:44 ArchLinux NetworkManager[436]: <warn> disconnected by the system bus.
mars 03 16:41:44 ArchLinux NetworkManager[436]: <warn> Connection disconnected (reason -3)
mars 03 16:41:44 ArchLinux ntpd[504]: ntpd exiting on signal 15
mars 03 16:41:44 ArchLinux kernel: wlp8s0: deauthenticating from c0:d9:62:8d:f4:c1 by local choice (reason=3)
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Manage, Install and Generate Color Profiles.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Daemon for power management.
mars 03 16:41:44 ArchLinux systemd[1]: Unit firewalld.service entered failed state.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped firewalld - dynamic firewall daemon.
mars 03 16:41:44 ArchLinux systemd[1]: firewalld.service: main process exited, code=exited, status=1/FAILURE
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Network Time Service.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Authorization Manager.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Accounts Service.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped GNOME Display Manager.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped D-Bus System Message Bus.
mars 03 16:41:44 ArchLinux systemd[1]: Starting Generate shutdown-ramfs...
mars 03 16:41:44 ArchLinux systemd[1]: Starting Store Sound Card State...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping D-Bus System Message Bus...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Bumblebee C Daemon...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping GNOME Display Manager...
mars 03 16:41:44 ArchLinux systemd[1]: Stopped target Login Prompts.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Login Prompts.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Login Service...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping MariaDB database server...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Network Time Service...
mars 03 16:41:44 ArchLinux systemd[1010]: Starting Exit the Session...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Apache Web Server...
mars 03 16:41:44 ArchLinux systemd[1010]: Reached target Shutdown.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped target Multi-User System.
mars 03 16:41:44 ArchLinux systemd[1010]: Starting Shutdown.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Multi-User System.
mars 03 16:41:44 ArchLinux systemd[1010]: Stopped target Default.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped target Graphical Interface.
mars 03 16:41:44 ArchLinux systemd[1010]: Stopping Default.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Graphical Interface.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Accounts Service...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Authorization Manager...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Daemon for power management...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping WPA supplicant...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Manage, Install and Generate Color Profiles...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping User Manager for 1000...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Disk Manager...
mars 03 16:41:44 ArchLinux systemd[1]: Removed slice system-getty.slice.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping system-getty.slice.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped target Bluetooth.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Bluetooth.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped target Sound Card.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Sound Card.
mars 03 16:41:44 ArchLinux systemd[1]: Stopped Session 2 of user damien.
mars 03 16:41:44 ArchLinux systemd[1]: Stopping Session 2 of user damien.
mars 03 16:41:44 ArchLinux systemd-logind[313]: System is rebooting.
I have no idea how to deal with that.
Any help will be appreciated.
Thanks
Last edited by Cthulhu82 (2014-03-04 09:05:36)
I gived a try to systemd 210. Indeed, the failures to unmount /home and swap disappeared, but the long shutdown remain.
Now, the only message left in red by journalctl are dbus related:
mars 04 09:45:32 ArchLinux systemd[1]: Stopped Network Manager.
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> exiting (success)
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> Removing DNS information from /usr/bin/resolvconf
mars 04 09:45:32 ArchLinux NetworkManager[441]: <error> [1393922732.757374] [nm-dispatcher.c:285] _dispatcher_call(): could not get dispatcher proxy!
mars 04 09:45:32 ArchLinux NetworkManager[441]: dbus_g_proxy_new_for_name: assertion 'connection != NULL' failed
mars 04 09:45:32 ArchLinux NetworkManager[441]: dbus_g_proxy_call_no_reply: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 04 09:45:32 ArchLinux NetworkManager[441]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> NetworkManager state is now DISCONNECTED
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (wlp8s0): taking down device.
mars 04 09:45:32 ArchLinux NetworkManager[441]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (wlp8s0): cleaning up...
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> Removing DNS information from /usr/bin/resolvconf
mars 04 09:45:32 ArchLinux NetworkManager[441]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 04 09:45:32 ArchLinux NetworkManager[441]: dbus_g_proxy_begin_call: assertion '!DBUS_G_PROXY_DESTROYED (proxy)' failed
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (wlp8s0): canceled DHCP transaction, DHCP client pid 980
mars 04 09:45:32 ArchLinux dhcpcd[980]: exited
mars 04 09:45:32 ArchLinux dhcpcd[980]: wlp8s0: removing interface
mars 04 09:45:32 ArchLinux dhcpcd[980]: received SIGTERM from PID 441, stopping
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (wlp8s0): deactivating device (reason 'removed') [36]
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (wlp8s0): device state change: activated -> unmanaged (reason 'removed') [100 10 36]
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (enp7s0): taking down device.
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (enp7s0): cleaning up...
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> (enp7s0): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
mars 04 09:45:32 ArchLinux NetworkManager[441]: <info> caught signal 15, shutting down normally.
mars 04 09:45:32 ArchLinux systemd[1]: Stopping Network Manager...
mars 04 09:45:32 ArchLinux systemd[1]: Stopped target Network.
mars 04 09:45:32 ArchLinux systemd[1]: Stopping Network.
mars 04 09:45:32 ArchLinux systemd[1]: Stopped target Remote File Systems.
mars 04 09:45:32 ArchLinux systemd[1]: Stopping Remote File Systems.
mars 04 09:45:32 ArchLinux systemd[1]: Stopped Apache Web Server.
mars 04 09:45:32 ArchLinux apachectl[2005]: httpd: Could not reliably determine the server's fully qualified domain name, using fe80::6a5d:43ff:fe22:4b3d for ServerName
mars 04 09:45:31 ArchLinux NetworkManager[441]: <error> [1393922731.444443] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:28 ArchLinux NetworkManager[441]: <error> [1393922728.444115] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:25 ArchLinux NetworkManager[441]: <error> [1393922725.444661] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:22 ArchLinux NetworkManager[441]: <error> [1393922722.443321] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:19 ArchLinux NetworkManager[441]: <error> [1393922719.444843] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:16 ArchLinux NetworkManager[441]: <error> [1393922716.443540] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:13 ArchLinux NetworkManager[441]: <error> [1393922713.445131] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:10 ArchLinux NetworkManager[441]: <error> [1393922710.443804] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:07 ArchLinux NetworkManager[441]: <error> [1393922707.444349] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:04 ArchLinux NetworkManager[441]: <error> [1393922704.443956] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:45:01 ArchLinux NetworkManager[441]: <error> [1393922701.444539] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:44:58 ArchLinux NetworkManager[441]: <error> [1393922698.443230] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:44:56 ArchLinux NetworkManager[441]: <info> (wlp8s0): roamed from BSSID C0:D9:62:8D:F4:C1 (Movellan) to (none) ((none))
mars 04 09:44:55 ArchLinux NetworkManager[441]: <error> [1393922695.444563] [nm-dbus-manager.c:278] nm_dbus_manager_init_bus(): Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken
mars 04 09:44:53 ArchLinux systemd[1]: Stopped MariaDB database server.
Similar Messages
-
Very long shutdown time after Yosemite install
After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
Problem description:
very long shutdown time after yosemite install
EtreCheck version: 2.1.8 (121)
Report generated 19 Feb 2015 01:19:39 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 868
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
LaCie LaCie Device 500,11 GB
EFI (disk2s1) <not mounted> : 210 MB
MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Karabiner.app
[not loaded] org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
/Library/Parallels/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
/System/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (4.7.1) [Click for support]
[loaded] com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
[not loaded] com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
[not loaded] com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
[loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
[not loaded] com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
[not loaded] com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
[not loaded] com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
[not loaded] com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
[not loaded] com.nvidia.CUDA (1.1.0) [Click for support]
[not loaded] com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
[loaded] com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
[not loaded] com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
[not loaded] com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
[not loaded] com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
[not loaded] com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
Startup Items: ℹ️
ciscod: Path: /System/Library/StartupItems/ciscod
CUDA: Path: /System/Library/StartupItems/CUDA
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
PACESupport: Path: /Library/StartupItems/PACESupport
ProTecVb: Path: /Library/StartupItems/ProTecVb
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[unknown] c om.apple.coreservices.appleevents.plist [Click for support]
[unknown] c om.apple.diskarbitrationd.plist [Click for support]
[unknown] c om.apple.mDNSResponder.plist [Click for support]
[unknown] co m.apple.securityd.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[loaded] com.cisco.anyconnect.gui.plist [Click for support]
[running] com.epson.epw.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.metakine.handsoff.agent.plist [Click for support]
[loaded] com.nvidia.CUDASoftwareUpdate.plist [Click for support]
[failed] com.parallels.desktop.launch.plist [Click for support]
[loaded] com.parallels.DesktopControlAgent.plist [Click for support]
[running] com.parallels.vm.prl_pcproxy.plist [Click for support]
[running] com.wacom.pentablet.plist [Click for support]
[running] net.culater.SIMBL.Agent.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[failed] com.autodesk.backburner_manager.plist [Click for support]
[running] com.autodesk.backburner_server.plist [Click for support]
[failed] com.autodesk.backburner_start.plist [Click for support]
[running] com.cisco.anyconnect.vpnagentd.plist [Click for support]
[running] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.metakine.handsoff.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.parallels.desktop.launchdaemon.plist [Click for support]
[loaded] com.rogueamoeba.hermes.plist [Click for support]
[loaded] com.rogueamoeba.instanton-agent.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
User Login Items: ℹ️
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.4 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
PenTablet [Click for support]
XDCAM Drive Monitor [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
Destinations:
Time Capsule [Local]
Total size: 799.52 GB
Total number of backups: 18
Oldest backup: 2014-11-12 02:44:18 +0000
Last backup: 2015-02-17 14:14:45 +0000
Size of backup disk: Too small
Backup size 799.52 GB < (Disk used 408.02 GB X 3)
Top Processes by CPU: ℹ️
20% mds
5% WindowServer
2% Google Chrome
1% launchd
1% prl_disp_service
Top Processes by Memory: ℹ️
515 MB Final Cut Pro
378 MB softwareupdated
309 MB Google Chrome
215 MB Google Chrome Helper
206 MB mds_stores
Virtual Memory Information: ℹ️
220 MB Free RAM
3.56 GB Active RAM
3.34 GB Inactive RAM
1.45 GB Wired RAM
7.56 GB Page-ins
4 MB Page-outs
Diagnostics Information: ℹ️
Feb 18, 2015, 04:35:18 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
Feb 18, 2015, 04:29:01 PM /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
Feb 18, 2015, 04:11:30 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
Feb 18, 2015, 04:04:44 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
Feb 18, 2015, 01:49:37 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
Feb 17, 2015, 05:36:32 PM Self test - passedPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Shut down from safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Mac 10.6.4 and CS5 - known problems? VERY slow, long freezes
I am on a brand new 12-core (dual 6-core 2.66GHz) Mac Pro with 16GB of RAM (and of course running 10.6.4). I have a new install of CS5 Master Suite (trial version, our box has not arrived yet), and primarily in my explorations with After Effects, it is running PAINFULLY slowly, mostly around simple interface stuff like scrubbing the timeline.
But this was also very apparent during rendering - a project that took about 20 minutes on my old 32-bit Core 2 Duo Dell with 4GB of RAM and CS4 took about 14 minutes on this new one under CS5 (running with 4 cores each using 2GB of RAM, and plenty of cores and RAM left over for other system stuff)... but I could see that a lot of that was due to HUGE delays in processing time as it rendered, long swaths of spinning beach-ball time. Had it not been for those, it likely would have rendered in about 2-3 minutes (as I would expect).
I have installed all available system and Adobe updates as of today (9/28/10), I am now running the updated AE 10.0.1... and I am having the same issues, with AE running very, very slowly. Scrubbing a project is nearly impossible - it regularly sends the system right to the beach-ball for many seconds; opening one project, which took 7-15 seconds on the Windows side (an old 32-bit Core 2 Duo Dell with 4GB Ram and CS4), takes up to 4:30 on the Mac under CS5! Same project, hierarchy, footage, etc.
I tried rendering it several ways: with 2 cores with 3GB each (leaving 6GB and 12 cores for other apps), with 3 multiprocessor cores each with 3GB of RAM (leaving 4GB of RAM and 10 cores for other apps), with 4 cores with 2GB each (6GB and 12 cores allowed for other stuff), with 7 cores each with 1.5 GB (leaving the minimum RAM and cores for other apps) and with NO multiprocessing on at all. Just for the baseline, the old Dell rendered this same file in 23:49, so all of these results are an improvement over that, but not nearly enough! Those long pauses still occurred - while watching the render, I could see it fly through parts, and then choke for many seconds at a time. Here are the timing results:
Multiprocessing Off: 9:57
2 Cores with 3GB each: 14:01
3 Cores with 3GB each: 9:36
4 Cores with 2GB each: 9:12
7 Cores with 1.5GB each: 15:12
This all seems pretty *******' random, though my testing methodology was far from iron-clad, as you can see. But either way, you would think with my system specs more cores would produce better results, not worse. I would have expected the 2 or 3 core configs to produce the best results.
The horrible lags seemed most pronounced on frames that cross faded, even a very simple crossfade - there was only one of significance in my video, where two videos crossfade over the space of about a second; each FRAME of that crossfade appeared to take about 20-30 seconds to render... or more accurately, each frame would render, and then there would be one of the insane processor lags. No lags this bad or pronounced happened on the Dell side - it was slow all around, but consistent.
Now, I did some tests with Activity Monitor open, and discovered some interesting things. When rendering with multiprocessing, each core used for rendering shows up as a process called "aeselflink" (as I'm sure you know), and at least a few of them are always at the top of the list, if you view activity by % CPU.
What was interesting is that while the render was actually processing (I could see motion in the render preview, as opposed to when it was choked), the CPU usage graph looked as you'd expect, going up and down between 5-50% of the CPU use. But when it stalled out and choked on a frame - or whatever it was doing - the CPU usage in the graph would PIN to the top as completely maxed out, with between 98 and 99% of the usage going to % User.
When those lags happened, the aeselflink processes often showed up as EACH using anywhere from 200% to 900% of the % CPU. Sometimes they were all pinned up there; other times only one or two seemed to demand that much time. Sometimes, however, things choked and the CPU usage graph showed NO activity, plain black idle for many seconds at a time. This doesn't seem to reveal much to me, but maybe smarter people can get some info from it.
Also, sometimes when starting a render, the aeselflink processes would show up in the Activity monitor normally, not demanding much time, but for a good long time (1-2 minutes) the main AE application process would show up red, saying it was not responding; during this time, the CPU usage graph showed almost no activity at all, just 0-10% User activity.
Whew. Ok, there's my random smattering of data. I hope this helps give someone in the know a better picture of what's going on here... this is a huge problem if it can't be addressed.
MattFrom the initial description this sounds a lot like the problems I've been having with rendering in After Effects CS5.
I have read a lot online about hyper-threading being the cause and have been adjusting various settings with multiprocessing and turning hyper-threading on and off. So far nothing has been able to give me consistent processor use during renders or reliable render times.
Here are the details of my set up:
Big Bad MF Mac
12 core Mac Pro, 2 x 2.93 GHz 6 core Intel Xeon, 32GB of RAM.
Boot Drive is 1TB
3 additional 2TB Hard drives RAID 0 for a 6TB Media Drive
Mac OS 10.6.4
After Effects 10.0.1
Project details are:
1920x1080, 23.976 FPS
Footage is all uncompressed 4:4:4 AJA Kona 10 bit RGB captured using Final Cut Pro from a Sony F950.
Project Color space is Apple RGB.
Using Keylight 1.2 to Key video and then placing the footage as a 3D layer, with several other 3D layers with 2 spot lights on the footage to generate shadows on the background layer.
Only effects used are Key Light 1.2, Levels, Hue and Saturation.
Output is 1920x1080 Animation codec quicktime at 100%, 48Khz Audio.
Multi processing is enabled. I have experienced the problem with many different settings.
Current settings are:
5GB for other applications
12 CPUs used for other applications
2GB per core.
All source footage is on the RAID. All output files are being written to the RAID.
Renders are amazingly inconsistent. Processor activity and render times are dramatically different when performing render tests with the same composition and identical settings. I regularly get the spinning beach ball and rendering pretty much stops for long periods of time. When watching the processors via activity monitor I have noticed many times that rendering starts out strong, peaking all processors being used regardless of multiprocessing settings. When this is happening the render looks like it is progressing as expected. Then after some period of time, sometimes 2 minutes, sometimes 10 minutes the processor use drops off and rendering slows to a crawl. When this happens the whole computer suffers. I can't even use a web browser.
After extensive testing I have noticed that I have my best luck setting up several items in the render que. Save. Quit. Restart. Turn off hyper-threading after restart via the processor pref pane from Apple. Open After effects and render. The problem will still occur, however if I'm lucky I can get good render performance for 10-20 minutes before the system starts to lag again. This is completely killing my work flow. I don't know what's going to happen from one render to the next.
I know this computer can scream under some situations, but something is terribly wrong here. This computer is not living up the hype on the Apple web site about Apple and Adobe After Effects.
Please help.
I'm going to add some more information just in case some engineer at Adobe gets his hands on this. HINT HINT
I set up a render before I left work last night. It was 7 clips as described above. I forgot to include the scrubbed audio to one of the comps so I went back and re-rendered the clip today. Last night the clip took 33 minutes to render. Today, after a restart and turning off hyper-threading. I opened After Effects, turned off multiprocessing and clicked ok. Then I went back and turned it on with these settings.
5GB for other Apps
12 installed cores (after disabling hyper-threading)
2 cores for other apps and 2GB per CPU.
So yeah, the exact same clip with audio rendered for me today in 5 minutes.
I should have some time today to run some experiments and do some testing. If anybody out there has any suggestions I'm game to try just about anything to help isolate the problem and get it fixed ASAP. I just hope this doesn't turn into one of those bugs where Adobe and Apple just keep kicking it back and forth and nothing ever gets resolved. -
Query takes very very long time to display on the web portal.
HI Gurus
My query takes very very long time to display the result on the web.It takes almost 30 mins to show the
results.However when I execute the same query in analyzer it shows the result in 10 Sec.
Gurus could u please let me what r the steps required to increase teh performance of it.
What steps BI Consultant take to resolve it . Is it a portal issue.
Regards
loyeeHi,
you can use the following parameters to the start URL: &PROFILING=X&TRACE=X. They could be set in iView of Portal as well as the url of the webtemplate. You will get information about performance of the web application.
Additional check this notes:
NW 7.0 BI Web Applications: Performance Problem Analysis
SAP Note Number: [1048691|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Performance problems when you start a query in Java Web
SAP Note Number: [950602|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Also intresting threads:
Re: Poor performance Web vs Bex
Re: BEx vs the Web : Which provides better performance
Regards
Andreas -
What happened ? Why can I no longer print PDF on my mac pro???????? Uninstalled reinstalled 3 times very very frustrated
I cant print anything now from my computer to my hp printer. Never had this happen until November or December. Then it seemed to be OK. now today I cant print one thing. not from my gmail, or the Matrix portal I use as a realtor. My office partner is connected to the same printer and his is fine. Mine prints nothing. All I get is a print screen that says loading preview... and the .. keep moving and nothing ever shows up. If I try to to to a PDF (which is the only way we could print anything after some update last fall from the Matrix portal) it just spins ... and nothing happens . WE use to be able to print without having to save everything to a download and that changed. now I cant print anything. I need help fast.... I can't get my work done at all and I'm getting very frustrated.
I uninstalled the adobe reader and re-installed it and nothing helps. We have 2 others printers in our office and it wont let me print to them either or allow me to save it as a PDF so I can print it out that way.;
I need HELP!!! Can't work this way and not sure what happened to cause this problem as things were fine earlier today. -
Lion is very slow in shutdown (4min 35sec).
after update of Leopard to Lion my MacBook PRO is very slow in shutdown (4min 35sec). please somebody to help me
Is a Western Digital Studio Edition II 2T (in RAID 1 mirror). The HD has 2 drives 1T each an put one mirroring the second one.
HD is connected to Mac through Firewire 800. -
When using CCC (Carbon Cophy Cloner) or Disk Utility to clone a Mac HD of one new iMac to another, over ThunderBolt, we are getting I/O errors. Even though the clone fails, the destination system does boot and log in, however, the logins take a very very very long time.
Thoughts.
Edit: Already ran Disk Utility. Also reinstalled a fresh OS on top of the cloned OS and it seemed to remedy the problem. Then, cloned to next machine in the row of the lab. Same problem.OK, by that I assume that you used Disk Utility to repair the subject disk and it reported "The volume (name) appears to be OK" in green.
Also verify you followed the instructions here: http://help.bombich.com/kb/usage-scenarios/i-want-to-clone-my-entire-hard-drive- to-a-new-hard-drive-or-a-new-machine
If so, the Thunderbolt connection begins to look suspicious.
Reinstalling OS X subsequent to the "clone" operation may be an acceptable workaround but you should not have had the I/O errors you describe, nor should the login times (subsequent to the initial login, that is) be unacceptably long. It calls into question the integrity of all the information that was transferrred.
I'll try to attract the attention of a CCC expert who will likely provide more competent assistance. You can also try the Bombich support site: http://help.bombich.com -
It's taking me very very long to load all my apps back to my phone. Can I do them individually?
You have to use the same apple id and password you used to purchase them. If you are using a different one then it will not work. Go to Settings>store and make sure on the very bottom you have the correct apple id. Do not use your icloud id as it is different.
-
Very very slow broadband , someone please help
Hi have come here as a last resort , i have been a bt internet/broadband user for over 10 years have had broadband for a long time , we often in our house have me playing games online on the pc , the kids have the xbox 360 and the mrs will have the ipad all hooked up at the same time with no problems ,
then friday the broadband dropped and we had a orange flashing light ,
it came back on about 5 mins later and ever since it is very very slow , i have tryed resteing and rebooting the router , it connects to the internet just fine but everything is running ar a snails pace , tryed calling them which is a nightmare trying to explaine to a call center guy , they told me to hang up for a line test and they would call me back and havnt bothered
i have done the line test online it it comes back as ok , we have noticed some nose on the phone line from today
can anyone please give me some advice?
here is btspeed check results:
FAQ
<script type="text/javascript"></script> Test1 comprises of Best Effort Test: -provides background information.
Download Speed
80 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 80 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :160 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.
Please visit FAQ section if you are unable To understand the test results.
http://speedtest.net/result/1379380863.pnghave phoned them 4 times now (2 times on 151) and they ensure me they have tested the line and i have no fault , they set up remote asstent and the guy did a soft restart of my hub which seemed to work , he then tryed to get me a better d/l speed but it whet back to a poor one again , so he again did a soft restart and i now get this:
ADSL line status
Connection Information
Line state
Connected <script type="text/javascript"></script>
Connection time
0 days, 00:40:50
Downstream
352 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
11.4 dB / 21.0 dB
Line attenuation (Down/Up)
21.4 dB / 12.0 dB
Output power (Down/Up)
1.0 dBm / 1.5 dBm
the downstream and upstream numbers are both better but it has made no differnace, every page i go to takes ages to load (if they load at all) and the ipad wont load at all , this is now getting silly i have wasted around 6 hrs of my time tonight trying to fix this and now just feel like canceling and ordering from eleswhere as i know the messing i will have to go through in the morning to explaine this from the start to a new call center worker all over again
i was led to belive that bt staff would help me if i posted here hence why i did so but even this is looking like a total waste of my time , (no dissrepect to you imjolly for your help) -
Very Very frustrated and ticked off!!!
I am right now very very ticked off, I recently made a video, and imported it to Quicktime using expert settings and whatever, and keep on trying to upload the video on Google Video, Yahoo, and YouTube, and nothing seems to work! Either it takes a second to upload on each one, than a day later says something I did wasnt right with the technical specifications or it takes like 4 hours and not even done uploading...
So anyone with personal experience with this, please tell me all the specifications on either Google or YouTube, not Yahoo.... Or tell me something I have done wrong, I will reward anyone with either a 'Solved' or 'Helpful'...
Thank you..I just put a test video up on YouTube with no problem.
How long is the movie you trying to upload? How large is the file.
Does your file have a file extension? Like Movie.dv?
Matt -
i'm using firefox 4.0 on an amd cpu running suse linux 11.4. i've completely turned off the gestures in suse (one of the first things i do, i can move a mouse very quickly and i like it to be a mouse!), i can't find a plugin or setting to turn these damn things off. the main problem is when i use the scroll wheel to rapidly move up or down a long web page and wind up on another page suddenly, very, very annoying! i really, really HATE gestures! then again i know how to use buttons etc. and i do mouse very quickly and creatively ( i also turn off several other "conveniances" like automatic window resizing, i know how to manage windows.....) thanks, i really, really hate these "features" being on by default, people with certain disabilites are probably also highly annoyed by the lack of choice in some procucts.
you really, really need to provide easy access to more settings, as evidenced by the number of extensions aimed at providing control to users. thanksYou can set all the mousewheel.with*.action prefs to 0 to perform a scroll.
mousewheel.withnokey.action
mousewheel.withaltkey.action
mousewheel.withcontrolkey.action
mousewheel.withmetakey.action
mousewheel.withshiftkey.action
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
If necessary then you can also set all the browser.gesture prefs to empty String values. -
Reasons why CS6 is running very very slow?
I have InDesign CS6 and the program is running extremely slow. I have googled and tried all troublshooting options but still cannot even highlight a sentence without it taking 30 seconds. Just going from one document to the next takes a very very long time. Besides for turning preflight off and other tricks is there anything else I can do to fix this problem?
Are you working documents from an older version of Indesign? I found that even though the document is "converted" Indesign CC has major problems with any older version's files.
I had to convert all my old files by copying masters and pages to a new, blank indesign cc document. All the speed issues went away.
Unfortunately, even though you can open the file, I don't feel it's compatible because you can't really work at that speed and still be profitable.
But hope that helps... -
G5 Dual - DVD Reader has gone very very slow after Leopard
After 1 Migrate install and 1 clean install, I notice that reinstalling apps is taking 4/5 times as long as they should it's as if my DVD Reader has gone very very slow. I thought at first it was the migration that had caused FCPS2 to reinstall slow.
(Sony DVD RW AW-G170A 4 months old) on G5 Dual 2's)
FCPS2 wanted 19-hrs to install, I waited 6 hrs and then gave up. Luckily or unluckily as the case may be I used the time install Leo on my other Macs.
In the end I have installed Apps over the Firewire network connected to my other G5 Dual with the stock DVD drive, they are installing fast now.Some more info about my setup:
*Simultaneous Dual band AEBS:*
Radio Mode: 802.11n only (5 GHz) - 802.11b/g
Radio Channel Selection: Manual - 161 (5GHz), 6(2.4GHz)
*Airport Express:*
Wireless mode: Extend a wireless network
Allow wireless clients checked under the name of the network (same as for AEBS).
Both are WPA/WPA2 Personal security. And both the routers were upgraded to 7.4.2 firmware this morning with the hope that it will help.
*N Devices (both working fine):*
Apple TV 40GB
2009 Model Mac Mini upgraded to Snow Leopard - working perfectly.
*G Devices:*
Thinkpad running WinXP
Dell Laptop running WinXP
Acer Netbook running WinXP
iPod Touch
iPhone 3G
Linksys webcam
_All of the above are working fine_.
+2008 model Mac mini -+ upgrade to Snow Leopard shows extremely slow wifi connection that it is unusable. It takes 20min to load apple homepage. When I boot from the clone of my Leopard lying on my external drive, it works perfectly.
I compared the settings between all the tabs of Network-->Airport-->Advanced and they are identical between Snow Leopard and Leopard mode except that SL doesn't have the "Apple Talk" tab.
Appreciate any help to debug this. -
My printer -photosmart plus B210a prints but the photos are very very dark HELP please
I have a Hp photosmart plus B210a just trying to print out some photos and they are very very dark The photos themselves are light and of a high Dpi any suggestions anyone ??? please they are of my son's wedding so are very important to me
What program are you printing from? What operating system? What are the printer settings for paper type and quality?
If you are printing from a program that allows selection of CMYK or RGB printing then select the RGB setting. Even though the inks are CMYK the driver is expecting RGB data.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
My photo booth screen is very very dark. I thought it was the screen but its at the brightest it can possibly be! So I grabbed my mothers MacBook Pro and It's much lighter and more clear. I have just the regular macbook. I also used the my camera on tumblr and it came up like my mothers. So could it just be photo booth? I also have no idea how to find out which operating system is downloaded. This is preowned.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.
Maybe you are looking for
-
For Your Consideration: Ultimate Lync 2010 client install with SCCM 2007
While the subject of my post may be very presumptuous, I submit the following for your consideration to answer the often-asked question about how to deploy Lync 2010 client with SCCM. Background: I cannot understand why Microsoft made the Lync instal
-
/http//... links in CS4 orphaned links report
I ran link checker on a site I am cleaning up in Dreamweaver. The orphaned file report shows many strange "what appear to be links" and not files. Below are some examples: /http//ima.google.com.sg/imgres /http//search.aol.com/aol/search /http//play-
-
Non-editable view after succesful save of complaint
Hello, We want to make the view of Complaints non-editable after succesful save of the Complaint. I think I must add some code in method EH_ONSAVE of component BT120H_CPL/ OVViewset. Do you have any idea of how to achieve this? Best Regards.
-
Fiel 2 file scenario - avoiding a line
hello experts I have a txt file to txt file scenario. I would like to know if it is possibleto avoid a specific line in the text file? for example I have a files that contains the same architecture: FILE=S0123123 REPORTS=000 6019, ,024312 6019, ,
-
Net price from P/R not getting adopted into P/O
Dear Friends, We are facing problem at the time of making new P/o from P/r. All the details from P/r are getting adopted into P/o except for the net price. Kindly advise whether any configuration settings need to be changed. Thank you Prashant