[SOLVED] Automatically loading module

Hi everyone,
Since I succeeded (with the help of some of you) to get my wi-fi back, I am unable to configure my system in order to automatically load the wi-fi module at boot. I actually read this post and this page of the wiki and so I created a new file : /etc/modules.load.d/brcmsmac.conf.
This file only contains a line : brcmsmac.
Despite this, brcmsmac isn't loaded. Is there something I am missing?
Last edited by nugetchar (2014-08-10 12:32:33)

Okay, so here are the permissions :
[nugetchar@arch ~]$ ls -l /etc/modules-load.d/
total 4
-rw-r--r-- 1 root root 8 Aug 10 00:21 brcmsmac.conf
And here is the part of the journal which might be interesting :
Aug 10 13:22:28 arch org.a11y.Bus[424]: Activating service name='org.a11y.atspi.Registry'
Aug 10 13:22:28 arch org.a11y.Bus[424]: Successfully activated service 'org.a11y.atspi.Registry'
Aug 10 13:22:28 arch org.a11y.atspi.Registry[449]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Aug 10 13:22:28 arch org.a11y.atspi.Registry[449]: ** (at-spi2-registryd:452): WARNING **: Failed to register client: GDBus.Error:org.freedeskto
Aug 10 13:22:28 arch org.a11y.atspi.Registry[449]: ** (at-spi2-registryd:452): WARNING **: Unable to register client with session manager
Aug 10 13:22:30 arch dbus[353]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Aug 10 13:22:30 arch systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Aug 10 13:22:30 arch systemd[1]: Started RealtimeKit Scheduling Policy Service.
Aug 10 13:22:30 arch dbus[353]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Aug 10 13:22:30 arch rtkit-daemon[485]: Successfully called chroot.
Aug 10 13:22:30 arch rtkit-daemon[485]: Successfully dropped privileges.
Aug 10 13:22:30 arch rtkit-daemon[485]: Successfully limited resources.
Aug 10 13:22:30 arch rtkit-daemon[485]: Running.
Aug 10 13:22:30 arch rtkit-daemon[485]: Watchdog thread running.
Aug 10 13:22:30 arch rtkit-daemon[485]: Canary thread running.
Aug 10 13:22:30 arch rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '1000' high priority at nice
Aug 10 13:22:30 arch rtkit-daemon[485]: Supervising 1 threads of 1 processes of 1 users.
Aug 10 13:22:31 arch org.freedesktop.Notifications[424]: ** (notify-osd:496): WARNING **: dnd_is_screensaver_active(): Got error "The name org.g
Aug 10 13:22:32 arch pulseaudio[484]: Availability of port 'analog-input-headset-mic' is inconsistent!
Aug 10 13:22:32 arch pulseaudio[484]: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided
Aug 10 13:22:42 arch org.freedesktop.Notifications[424]: ** (notify-osd:496): WARNING **: dnd_is_screensaver_active(): Got error "The name org.g
Aug 10 13:22:42 arch org.freedesktop.Notifications[424]: (notify-osd:496): Wnck-WARNING **: Unhandled action type _OB_WM_ACTION_UNDECORATE
Aug 10 13:22:54 arch slim[357]: The XKEYBOARD keymap compiler (xkbcomp) reports:
Aug 10 13:22:54 arch slim[357]: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
Aug 10 13:22:54 arch slim[357]: > Ignoring extra symbols
Aug 10 13:22:54 arch slim[357]: Errors from xkbcomp are not fatal to the X server
Aug 10 13:23:24 arch sudo[545]: nugetchar : TTY=pts/0 ; PWD=/home/nugetchar ; USER=root ; COMMAND=/usr/bin/modprobe brcmsmac
Aug 10 13:23:24 arch sudo[545]: pam_unix(sudo:session): session opened for user root by nugetchar(uid=0)
Aug 10 13:23:24 arch kernel: bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
Aug 10 13:23:24 arch kernel: bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Aug 10 13:23:24 arch kernel: bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Aug 10 13:23:24 arch kernel: bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
Aug 10 13:23:24 arch kernel: bcma: bus0: Bus registered
Aug 10 13:23:24 arch kernel: brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Aug 10 13:23:24 arch sudo[545]: pam_unix(sudo:session): session closed for user root
Aug 10 13:23:24 arch NetworkManager[351]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/bcma
Aug 10 13:23:24 arch systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill1...
Aug 10 13:23:24 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Aug 10 13:23:24 arch kernel: ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
Aug 10 13:23:24 arch systemd[1]: Started Load/Save RF Kill Switch Status of rfkill1.
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): using nl80211 for WiFi device control
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): driver supports Access Point (AP) mode
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): exported as /org/freedesktop/NetworkManager/Devices/2
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Aug 10 13:23:24 arch systemd-udevd[547]: renamed network interface wlan0 to wlp3s0
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): preparing device
Aug 10 13:23:24 arch dbus[353]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service'
Aug 10 13:23:24 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Aug 10 13:23:24 arch kernel: brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
Aug 10 13:23:24 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Aug 10 13:23:24 arch systemd[1]: Starting WPA supplicant...
Aug 10 13:23:25 arch dbus[353]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Aug 10 13:23:25 arch NetworkManager[351]: <info> wpa_supplicant started
Aug 10 13:23:25 arch systemd[1]: Started WPA supplicant.
Aug 10 13:23:25 arch NetworkManager[351]: <info> (wlp3s0) supports 4 scan SSIDs
Aug 10 13:23:25 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: starting -> ready
Aug 10 13:23:25 arch NetworkManager[351]: <info> (wlp3s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
Aug 10 13:23:25 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: ready -> disconnected
Aug 10 13:23:25 arch NetworkManager[351]: <info> (wlp3s0) supports 4 scan SSIDs
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Aug 10 13:23:26 arch NetworkManager[351]: <info> Auto-activating connection 'Livebox-B34A'.
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) starting connection 'Livebox-B34A'
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Aug 10 13:23:26 arch NetworkManager[351]: <info> NetworkManager state is now CONNECTING
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0/wireless): connection 'Livebox-B34A' has security, and secrets exist. No ne
Aug 10 13:23:26 arch NetworkManager[351]: <info> Config: added 'ssid' value 'Livebox-B34A'
Aug 10 13:23:26 arch NetworkManager[351]: <info> Config: added 'scan_ssid' value '1'
Aug 10 13:23:26 arch NetworkManager[351]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Aug 10 13:23:26 arch NetworkManager[351]: <info> Config: added 'auth_alg' value 'OPEN'
Aug 10 13:23:26 arch NetworkManager[351]: <info> Config: added 'psk' value '<omitted>'
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Aug 10 13:23:26 arch NetworkManager[351]: <info> Config: set interface ap_scan to 1
Aug 10 13:23:26 arch kernel: wlp3s0: authenticate with b0:75:d5:87:b3:4a
Aug 10 13:23:26 arch kernel: wlp3s0: send auth to b0:75:d5:87:b3:4a (try 1/3)
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: inactive -> authenticating
Aug 10 13:23:26 arch kernel: wlp3s0: authenticated
Aug 10 13:23:26 arch kernel: wlp3s0: associate with b0:75:d5:87:b3:4a (try 1/3)
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: authenticating -> associating
Aug 10 13:23:26 arch kernel: wlp3s0: RX AssocResp from b0:75:d5:87:b3:4a (capab=0x431 status=0 aid=1)
Aug 10 13:23:26 arch kernel: brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
Aug 10 13:23:26 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Aug 10 13:23:26 arch kernel: wlp3s0: associated
Aug 10 13:23:26 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: associating -> associated
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: associated -> 4-way handshake
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): supplicant interface state: 4-way handshake -> completed
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 3 of 5 (IP Configure Start) scheduled.
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 3 of 5 (IP Configure Start) started...
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Aug 10 13:23:26 arch NetworkManager[351]: <info> dhcpcd started with pid 585
Aug 10 13:23:26 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 3 of 5 (IP Configure Start) complete.
Aug 10 13:23:26 arch dhcpcd[585]: version 6.4.3 starting
Aug 10 13:23:26 arch NetworkManager[351]: dhcpcd[585]: version 6.4.3 starting
Aug 10 13:23:26 arch NetworkManager[351]: <info> (wlp3s0): DHCPv4 state changed nbi -> preinit
Aug 10 13:23:26 arch NetworkManager[351]: dhcpcd[585]: DUID 00:01:00:01:1b:77:fa:2f:0c:84:dc:63:61:ef
Aug 10 13:23:26 arch NetworkManager[351]: dhcpcd[585]: wlp3s0: IAID dc:63:61:ef
Aug 10 13:23:26 arch dhcpcd[585]: DUID 00:01:00:01:1b:77:fa:2f:0c:84:dc:63:61:ef
Aug 10 13:23:26 arch dhcpcd[585]: wlp3s0: IAID dc:63:61:ef
Aug 10 13:23:26 arch dhcpcd[585]: wlp3s0: soliciting an IPv6 router
Aug 10 13:23:26 arch NetworkManager[351]: dhcpcd[585]: wlp3s0: soliciting an IPv6 router
Aug 10 13:23:27 arch dhcpcd[585]: wlp3s0: rebinding lease of 192.168.1.23
Aug 10 13:23:27 arch NetworkManager[351]: dhcpcd[585]: wlp3s0: rebinding lease of 192.168.1.23
Aug 10 13:23:32 arch dhcpcd[585]: wlp3s0: leased 192.168.1.23 for 86400 seconds
Aug 10 13:23:32 arch dhcpcd[585]: wlp3s0: adding route to 192.168.1.0/24
Aug 10 13:23:32 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
Aug 10 13:23:32 arch NetworkManager[351]: dhcpcd[585]: wlp3s0: leased 192.168.1.23 for 86400 seconds
Aug 10 13:23:32 arch NetworkManager[351]: dhcpcd[585]: wlp3s0: adding route to 192.168.1.0/24
Aug 10 13:23:32 arch NetworkManager[351]: <info> (wlp3s0): DHCPv4 state changed preinit -> reboot
Aug 10 13:23:32 arch NetworkManager[351]: <info> address 192.168.1.23
Aug 10 13:23:32 arch NetworkManager[351]: <info> plen 24 (255.255.255.0)
Aug 10 13:23:32 arch NetworkManager[351]: <info> gateway 192.168.1.1
Aug 10 13:23:32 arch NetworkManager[351]: <info> server identifier 192.168.1.1
Aug 10 13:23:32 arch NetworkManager[351]: <info> lease time 86400
Aug 10 13:23:32 arch NetworkManager[351]: <info> nameserver '192.168.1.1'
Aug 10 13:23:32 arch NetworkManager[351]: <info> nameserver '192.168.1.1'
Aug 10 13:23:32 arch NetworkManager[351]: <info> domain name 'home'
Aug 10 13:23:32 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Aug 10 13:23:32 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 5 of 5 (IPv4 Commit) started...
Aug 10 13:23:32 arch NetworkManager[351]: <info> (wlp3s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
Aug 10 13:23:32 arch NetworkManager[351]: <info> Activation (wlp3s0) Stage 5 of 5 (IPv4 Commit) complete.
Aug 10 13:23:32 arch NetworkManager[351]: <info> (wlp3s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
Aug 10 13:23:32 arch NetworkManager[351]: <info> (wlp3s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Aug 10 13:23:32 arch NetworkManager[351]: <info> NetworkManager state is now CONNECTED_LOCAL
Aug 10 13:23:32 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
Aug 10 13:23:32 arch NetworkManager[351]: <info> NetworkManager state is now CONNECTED_GLOBAL
Aug 10 13:23:32 arch NetworkManager[351]: <info> Policy set 'Livebox-B34A' (wlp3s0) as default for IPv4 routing and DNS.
Aug 10 13:23:32 arch NetworkManager[351]: <info> Writing DNS information to /usr/bin/resolvconf
Aug 10 13:23:34 arch NetworkManager[351]: <info> Activation (wlp3s0) successful, device activated.
It kind of unreadable so here is the result with a grep :
Aug 10 13:22:09 arch systemd-modules-load[175]: Module 'brcmsmac' is blacklisted
Aug 10 13:23:24 arch sudo[545]: nugetchar : TTY=pts/0 ; PWD=/home/nugetchar ; USER=root ; COMMAND=/usr/bin/modprobe brcmsmac
Aug 10 13:23:24 arch kernel: brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Aug 10 13:23:24 arch NetworkManager[351]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/bcma0:0/ieee80211/phy0/rfkill1) (driver brcmsmac)
Aug 10 13:23:24 arch kernel: ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
Aug 10 13:23:24 arch NetworkManager[351]: <info> (wlp3s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
Aug 10 13:23:24 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Aug 10 13:23:24 arch kernel: brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
Aug 10 13:23:26 arch kernel: brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
Aug 10 13:23:26 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Aug 10 13:23:32 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
Aug 10 13:23:32 arch kernel: brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
It appear that brcmsmac is blacklisted, but this is weird because in the /etc/mordprobe.d/modprobe.conf file, it is not :
[nugetchar@arch etc]$ more modprobe.d/modprobe.conf
alias floppy off
blacklist fd0
blacklist floppy
blacklist ipv6
blacklist pcspkr
blacklist snd_pcsp

Similar Messages

[SOLVED] can't load module-echo-cancel for PulseAudio (WebRtc)

I have added the line load-module module-echo-cancel to /etc/pulse/default.conf as said in the arch wiki but after I do that , I cannot start pulse and it gives me the follwoing error :
E: [pulseaudio] main.c: Daemon startup failed.
I have tried looking in the forum and google for a soulation but failed to find something that works , also tried different variations of the line like :
load-module module-echo-cancel source_name=echosource sink_name=echosink channels=1
but nothing works ...
so I think it is either the line I use is somehow wrong or I am missing some dependency for using webrtc.
thanks in adavnce for any help.
edit : well I solved the problem ..., it seems that after I have installed pavucontrol I was able to succsufully load the echo-cancel module
Last edited by XDarkAngelX (2015-01-17 20:42:30)

ok, did and done. (However, note that this isn't raw code since I have to type from display of the monitor to the laptop.)
# file /boot/vmlinuz-linux
/boot/vmlinuz-linux: Linux kernel x86 boot executable bzImage, version 3.6.2-1-ARCH (tobias@T=POWA-LX) #1 SMP PREMPT Fri Oct 12 23:58, RO-rootFS, swap_dev 0x3, Normal VGA
According to file, I do have the latest kernel, which makes this even more peculiar since it isn't consistent with 'uname -r'
3.5.6-1-ARCH
and I'm using grub legacy, I think.
# cat /boot/grub/menu.1st
timeout 5
default 0
color light-blue/black light-cyan/blue
# BOOT SECTION
# (0) Arch Linux
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/xxxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx ro modeset=0
initrd /boot/initramfs-fallback.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx ro
initrd /boot/initramfs-fallback.img
I didn't post the whole config since transcribing comments with mode suggestions would be needless. But I don't think there's any danger in ommitting the '#' lines, is there?

[SOLVED] Failure when loading modules, but everything works fine

I've updated Linux from 2.6 to 3.0, everything seems to be working as before, but I'm getting this when booting:
Loading modules [FAIL]
I don't see anything relevant in dmesg output, everything seems to be loaded fine. Is anybody else getting the same error since the kernel update?
Last edited by Camus (2011-08-08 14:07:56)

What's strange is that Tp smapi's functionality seems to be there anyway... It's a module for battery control in Thinkpads and my battery indeed doesn't charge beyond 80%, the way I want it to be.
I'm having the same issue. I think you will find that the "functionality" isn't provided, as you said, /sys/devices/platform/smapi doesn't exist, and that your battery is actually remembering the last charge limits you sent to it. Try to remove the battery and put it back, I'm nearly sure that it'll lose them. This is what happens to me on my second battery, the ultra-bay one, which I occasionally have to remove to insert my CD drive.
No idea why tp_smapi doesn't load when put in MODULES in rc.conf, but workarounds should be easy. Alternatively, if you only use it to update your charge settings, you can just manually load it each time you need to.
EDIT :
Have just found out that by manually adding thinkpad_ec before tp_smapi in MODULES in rc.conf, everything loads. Strange, since thinkpad_ec should be loaded automatically with tp_smapi. But hey, it works.
Last edited by idx (2011-08-19 11:08:08)

Fails to load modules while lauching Xfce4 (SOLVED)

When I type "startxfce4" I get something like this:
Failed to load module: sis (module does not exist, 0)
Failed to load module: vga (module does not exist, 0)
Failed to load module: vesa (module does not exist, 0)
Failed to load module: mouse (module does not exist, 0)
Failed to load module: [AND_SOME_MORE] (module does not exist, 0)
Fatal server error:
no screens found
Fatal IO error 104 (connecting reset by peer) on X server ":0.0"
after 0 requests ( 0 known processed) o events remaining.
I have no idea what it means (except that I miss some modules).
/Richard

those are xorg modules
As xorg7 is modular, you'll need to install the modules you need. At least you should have for keyboard and mouse to work:
pacman -S xf86-input-mouse xf86-input-keyboard
Then you should have one for your video card
pacman -S xf86-video-{your video}
You can see which ones are available from
pacman -Ss xf86-video
Then you need to configure xorg if you haven't done so far.
As root type 'xorgconfig' for a nice script to help you configure it.

[SOLVED]Gtk-Message: Failed to load module "canberra-gtk-module"

Hi,
I'm getting this message
Gtk-Message: Failed to load module "canberra-gtk-module"
keepassx: symbol lookup error: /usr/lib/gtk-2.0/2.10.0/engines/libindustrial.so: undefined symbol: gtk_check_version
for various gtk-based applications.
I've read that is fixed, https://bugs.archlinux.org/task/23655.
Using Arch 64 bit, XFCE here.
Any clue?
Last edited by kinu (2011-09-29 13:17:06)

Changing gtk theme do the trick. I get the message, but applications start ok.

[SOLVED] "Loading Modules" Slow after Latest Upgrade (EeePC 901)

After the latest upgrade, my EeePC is taking an incredibly long time (20+ seconds) at the "Loading Modules" stage of the boot process. I cannot find any error messages, and after the pause, the machine boots normally. This process used to be almost instantantaneous before the upgrade. The modules being loaded are rfkill and eeepc_laptop.
Can anyone help?
Thanks in advance
Last edited by myrlin (2011-06-27 10:28:21)

Hi Jason, thank you for helping me.
Here is my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_GB.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(rfkill eeepc_laptop)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="eeepc"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus hal networkmanager privoxy netfs rfkill eeepc_laptop @ufw @crond @alsa !bluetooth @samba @cups)
Here is my blacklist.conf (I have restored the framebuffer one):
blacklist rt2800pci
blacklist rt61pci
blacklist rt2x00pci
blacklist rt2800usb
blacklist rt2800lib
blacklist rt2x00usb
blacklist rt2x00lib
And here is the output of lsmod:
Module Size Used by
fuse 58669 3
ipt_REJECT 2029 1
ipt_LOG 6518 5
xt_multiport 1498 2
xt_limit 1423 7
xt_tcpudp 1883 7
xt_addrtype 2393 4
nf_conntrack_ipv4 9601 7
nf_defrag_ipv4 1023 1 nf_conntrack_ipv4
xt_state 971 7
ip6table_filter 1072 1
ip6_tables 10461 1 ip6table_filter
ipv6 249260 12
nf_conntrack_netbios_ns 801 0
nf_conntrack_broadcast 961 1 nf_conntrack_netbios_ns
nf_conntrack_pptp 3857 0
nf_conntrack_proto_gre 3241 1 nf_conntrack_pptp
nf_conntrack 50208 6 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_pptp,nf_conntrack_proto_gre
iptable_filter 1100 1
ip_tables 9186 1 iptable_filter
x_tables 11774 11 ipt_REJECT,ipt_LOG,xt_multiport,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables
btusb 9897 0
bluetooth 115465 1 btusb
uvcvideo 55020 0
videodev 70734 1 uvcvideo
media 8545 1 videodev
joydev 7535 0
snd_hda_codec_realtek 225687 1
i915 557262 2
snd_hda_intel 19261 1
snd_hda_codec 66793 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4919 1 snd_hda_codec
drm_kms_helper 24245 1 i915
snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
drm 147653 3 i915,drm_kms_helper
uhci_hcd 19344 0
snd_timer 15542 1 snd_pcm
ehci_hcd 34847 0
rt2860sta 479236 1
intel_agp 8664 1 i915
psmouse 55927 0
snd 43527 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
usbcore 119004 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
i2c_algo_bit 4431 1 i915
iTCO_wdt 10333 0
i2c_i801 7039 0
serio_raw 3430 0
pcspkr 1415 0
sg 21022 0
i2c_core 16665 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
evdev 7310 15
intel_gtt 11417 3 i915,intel_agp
crc_ccitt 1103 1 rt2860sta
iTCO_vendor_support 1553 1 iTCO_wdt
soundcore 5018 1 snd
battery 8905 0
processor 21884 0
eeepc_laptop 12452 0
atl1e 24804 0
button 3654 1 i915
sparse_keymap 2636 1 eeepc_laptop
thermal 6603 0
ac 2545 0
video 9852 1 i915
snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
pci_hotplug 21978 1 eeepc_laptop
agpgart 22160 3 drm,intel_agp,intel_gtt
rfkill 12510 2 bluetooth,eeepc_laptop
ext4 334626 3
mbcache 4321 1 ext4
jbd2 59098 1 ext4
crc16 1077 2 bluetooth,ext4
sd_mod 25515 5
ata_piix 18569 3
pata_acpi 2396 0
libata 154349 2 ata_piix,pata_acpi
scsi_mod 110670 3 sg,sd_mod,libata
I hope this all means more to you than it does to me!!!!

[SOLVED] Can't load module autofs4

I am following autofs wiki page which instructs me to load module autofs4. modprobe autofs4 and sudo modprobe autofs4 result in no console output.
Trying to remove module:
$ sudo modprobe -r autofs4
modprobe: FATAL: Module autofs4 is builtin.
Do I need to load this module at all?
Couldn't find "autofs" in lsmod, modinfo, dmesg, systool -v -m.
Anyone point me in right direction?
Last edited by axper (2013-04-24 17:25:43)

axper wrote:modprobe: FATAL: Module autofs4 is builtin.
Read that line again.

[SOLVED] [systemd] systed-module-load.service inactive (dead)

Hello archers,
I use VirtualBox and I'm tired of loading modules manually so I figured that a conf file can be created in /etc/modprobe.d/ that will load those modules at boot. Well, easier said than done because it doesn't seem to work.
Here's my virtualbox.conf:
# modules relevant to VirtualBox
vboxdrv
vboxnetadp
vboxnetflt
and here's my systemctl status systemd-modules-load.service:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: inactive (dead)
start condition failed at Sun 2013-10-20 09:27:06 CEST; 6s ago
none of the trigger conditions were met
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Looking forward to hearing from you.
Last edited by robin92 (2013-10-20 11:10:55)

robin92 wrote:so I figured that a conf file can be created in /etc/modprobe.d/ that will load those modules at boot.
Why not read the Wiki and follow the instructions?
https://wiki.archlinux.org/index.php/VirtualBox
Last edited by loafer (2013-10-20 08:06:04)

[SOLVED] unable to pass loading modules

Hello people,
Turned my netbook off yesterday. There was no updates. Unable to boot past loading modules.
Booting from my USB key worked, cleared out all the modules in rc.conf, which didn't work. Booting into failback has the same outcome.
Any ideas?
Neil
Last edited by nperry (2011-02-23 08:45:33)

I made a typo on a Udev rule, not to sure if this a bug. If a error is made in a udev rule shouldn't it at least show an error or by pass that rule?

[bumblebee] Failed to load module "nouveau" (module does not exist, 0)

Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!

Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages

How do I stop automatic loading of the next page as I scroll to the bottom of an internet page that has a number of pages?

When I search with Google, as I scroll to near the bottom of the page, the next page of results automatically loads. I can never get to and use the similar searches, or "Searches related to ***", which are at the bottom of the page, as the next page loads and focuses at the top of that next page. Also, there is a bar with the page number, and a field with a "Jump to" command with a pop down arrow with page numbers, and up and down arrows beside it which go up or down one page if used.
This does not happen with, say, Bing, nor if I use Int Expl (aagh).
I have no autopage type of add-ons, or plugins.. I may have had an add-on at one time. There are a bunch of autopager "strings", or lines, in about:config. How do you remove them, if that is the problem?
How do I stop this from happening? It is extremely annoying.
Thanks,
SK

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Why will images will not automatically load in apple mail despite having the setting turned on correctly

I have had this ongoing problem. I cannot get images to automatically load in mail. Instead I always have to click the load images button. I click on a message, click load images, the images load. I click on another message, then back to the message with the images and have to reload them.
In preferneces I have turned the View>Load remote HTML images on and off and on again, and rebotted multiple times. It makes no difference. The images do not load.
I checked Little Snitch, but all ports are open.
My firewall is set to let everything connect to mail. Even just turning off the firewall does not solve the problem.
I tried removing com.apple.mail.plist but that did not work either.
This problem occurs in Mail on a MacBook Pro and on a MacBook Air both using the newest version of OS Mountain Lion. The problem happened in OS Lion as well.
The senders are in my contacts, so that doesn't help either.
This is not an issue with the serve sending the images. The images load if I click load images. They just will not automatically laod.
I've read tons of posts but no one seems to know how to solve the problem.
Does anyone have any other ideas?

I am not sure how to link these discussions, so below I am pasting the post that helped me. And here is the link:
https://discussions.apple.com/message/15733241#15733241
louse101
Jul 25, 2011 3:17 AM
This is not a problem specific to Lion, but most recent OS X versions. Regularly I receive email formatted as HTML, which includes JPEG images embedded within them. These images are technically attachments, and as such, Mail.app displays them as a placeholder. Other mail apps will display these images inline, regardless of them being an attachment, remote image or otherwise.
How can I make these images load automatically?
MacBook, Unibody, Mac OS X (10.7), 750GB, 7200RPM WD HDD, 4GB RAM
This solved my question by louse101 on Jul 26, 2011 3:47 AM
No-one replied, but I found a solution on another board. Run Terminal (do a Spotlight search if you don't know where to find this), and type:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool false
This will force Mail not to disable inline attachment viewing. Obviously, to reverse this, simple replace 'false' at the end with 'true'.
See the answer in context

How to disable automatic loading of iView/Page in detailed navigation?

Hello,
We've upgraded our portal 7.0 from SP9 to SP12.
I've noticed that SAP have added this change: Whenever a user is navigating between one role/tab to another in the top level navigation the first folder at the detailed navigation is automatically opened and the first content there is automatically loaded.
I would like to disable this option - I've looked at the new properties that have been added to the detailed navigation iView between SP9 and SP12 and could only find these two: Display Parent of Hidden Node and Open Folder When Launched.
These two are not solving this problem and they are disabled anyway.
Any ideas...?
Roy

Roy,
Role and Workset Hierarchy:
Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
Hope this time it helps you.
Thanks
Mona

How to unload dynamically loaded modules?

Hi,
I have a problem with unloading module, which I loads dynamically.
Here is a fragment my code:
<TitledWindow .......creationComplete="init()"/>
<mx:Accordion id="lista_ryzyk">
</mx:Accordion>
<mx:Script>
public function init():void
{    CairngormEventDispatcher.getInstance().addEventListener(LoadRisksEvent.EVENT_RESULT, populateAccordion);
public function populateAccordion(event:CairngormEvent):void
     lista_ryzyk.removeAllChildern();
     for (i in risks)
          var m:ModuleLoader = new ModuleLoader();
          m.url = path_to_module;
          m.label = module_label;
          m.loadModule();
     lista_ryzyk.addChildAt(m,Number(i));
</mx:Script>
The modules loads fine. Each module adds own eventListener for some event. It works fine, but ONLY for first time. For next invoke populateAccordion function, the modules loads, but don't reacts for event. I investigate !!! that for events reacts that modules, which was loaded for the first time!!! How to remove it????

Using array, didn't solve my problem, but it is possible that I'm doing something wrong.
I still can't catch event in second time loaded module :-((( I have tried to solve this problem from wednesday! it goes me crazy!
Could you, or anybody, try to inspect my code and help me? I have no idea how to manage it.
I know exactly what is wrong, but I can't improve that. In module's creationComplete function I display the UID of this module, and in body of eventHandler function I do the same. In case of FIRST time the displayed UID are the same, but when I load the module second time, the UID of the loaded module displayed in creationComplete function is new, but the UID displayed in handler function is the same as the first loaded module. So my event is catch by the wrong modul, and I don'tknow how to change it, how to process event in my newly loaded module.

IPod touch is not automatically loading if connected to Philips DS7550 docking station ..

iPod touch is not automatically loading if connected to Philips DS7550 docking station .. who has a clue how to solve this ?

The follwoign Phillipss document list the compatibility. Since you did not list your iPod model or iOS you ave to look your self.
Table 20110617.pdf
For the 4G iPod it only lists 4.2.1. The date of the list is 6/20/20111.
You might want to contact Phillips

[SOLVED] Automatically loading module

Similar Messages

Maybe you are looking for