[SOLVED] Conky 100% transparent bg with Compiz

Enabling the Compiz Wallpaper (diffrent wallpaper at different desktop) with disabled nautilus/xfdesktop to draw on it..
How to make conky seems not to lose the transparency?
Last edited by rhoit (2013-01-18 16:36:04)

Hmm, I'm not too sure then. Have you tried asking in the compiz IRC channel? #compiz on freenode. Also these might be relevant:
http://ubuntuforums.org/showthread.php?t=1478252
http://connermccall.com/20080729/conky-with-compiz/
Good luck!

Similar Messages

[Solved] Multiple wallpapers on MATE with Compiz

Hi.
I wanted to make MATE work with Compiz so it would let me have multiple wallpapers with the Wallpapers feature in ccsm. When I set the settings in ccdm, it doesn't work.
I googled it, and although it showed me a few settings I should change in the configuration editor, it did nothing.
What should I do so I can make it work?
EDIT: solved. Basically, I removed nautilus (I don't want to use it anymore) -- it was also conflicting with caja, and set the show_desktop in apps/caja/preferences to false.
Note: setting the show_desktop to false will mean removing icons from desktop. I don't know how to put them back up, but I will look it up later.
Last edited by Technicolor (2012-09-13 13:42:55)

fabertawe wrote:
Technicolor wrote:
EDIT: solved. Basically, I removed nautilus (I don't want to use it anymore) -- it was also conflicting with caja, and set the show_desktop in apps/caja/preferences to false.
Note: setting the show_desktop to false will mean removing icons from desktop. I don't know how to put them back up, but I will look it up later.
Ah, of course, Nautilus was managing the desktop. You can turn that off from Nautilus in its preferences so you can still use it as the file manager (if I remember right). Well that's how it worked with Gnome 2 anyway. BTW, isn't Caja their name for Nautilus, so the same thing?
As for icons, I don't use or want those on my desktop so I've never looked into a replacement functionality but this might be something you have to give up to have Compiz manage the wallpapers.
p.s. If you're looking for an amazing file manager then check out SpaceFM.
It's just a file manager, right?
I'm looking at it right now, it looks amazing.

[SOLVED] Conky troubles with Gnome

I don't know if I am making some obvious, easily correctable mistake, or if this is a known bug. I have looked on the wiki and all I could find about Conky on Gnome was a short little thing that caused this problem:
http://imgur.com/jQPBsDq
Here is my .conkyrc file:
# Conky, a system monitor, based on torsmo
# Any original torsmo code is licensed under the BSD license
# All code written since the fork of torsmo is licensed under the GPL
# Please see COPYING for details
# Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
# Copyright (c) 2005-2010 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
# All rights reserved.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
own_window yes
own_window_type conky
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
alignment lower_right
background yes
border_width 1
cpu_avg_samples 2
default_color white
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
use_xft yes
xftfont DejaVu Sans Mono:size=12
gap_x 5
gap_y 60
minimum_size 5 5
net_avg_samples 2
no_buffers yes
out_to_console no
out_to_stderr no
extra_newline no
stippled_borders 0
update_interval 1.0
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no
TEXT
${scroll 16 $nodename - $sysname $kernel on $machine | }
$hr
${color grey}Uptime:$color $uptime
${color grey}Frequency (in MHz):$color $freq
${color grey}Frequency (in GHz):$color $freq_g
${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}
${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}
${color grey}CPU Usage:$color $cpu% ${cpubar 4}
${color grey}Processes:$color $processes ${color grey}Running:$color $running_processes
$hr
${color grey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar 6 /}
${color grey}Networking:
Up:$color ${upspeed eth0} ${color grey} - Down:$color ${downspeed eth0}
$hr
${color grey}Name PID CPU% MEM%
${color lightgrey} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
Has anyone else discovered a way to make conky work transparently with Gnome as a DE?
Thanks for the help!
Last edited by treeman1111 (2013-02-17 22:21:02)

treeman1111 wrote:All you do is follow me around and tell me what I am doing wrong.
Thats because you keep exhibiting the same behaviours, despite being asked not to.
I'll link you (again) to the Forum Etiquette. Please read all of it.
Don't expect that help vampirism will be tolerated here, it won't.
I'll also remind you of the Arch Way
This user-centric design necessarily implies a certain "do-it-yourself" approach to using the Arch distribution. Rather than pursuing assistance or requesting a new feature to be implemented by developers, Arch Linux users have a tendency to solve problems themselves and generously share the results with the community and development team – a "do first, then ask" philosophy.

Assuming video is not compatible with compiz-fusion...?

I'm installing ArchLinux on a extra computer at work... works great... but for the fun of it I tried running compiz fusion on it. I get this:
[root@myhost ~]# fusion-icon
* Detected Session: kde
* Searching for installed applications...
* Using the GTK Interface
(fusion-icon:7540): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
* KWin is already running
* Setting window manager to Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
* Setting window manager to KWin
I'm just using an xorg.conf that was generated with #X -configure, and have also tried one generated with hwd -x. Both detect "sis" as the video driver. Listing below...
Am I right to assume that this means that the video in not compatible with compiz? Or could it be some settings that need to be tweaked.
Thanks for any advice.
Rick
xorg.conf.sis generated with "#hwd -x"
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "sis"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
xorg.conf generated with "#X -configure"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "xtrap"
Load "GLcore"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 270 200 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "1033"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # 
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # 
#Option "PDC" # 
#Option "PanelDelayCompensation2" # 
#Option "PDC2" # 
#Option "PanelDelayCompensation1" # 
#Option "PDC1" # 
#Option "EMI" # 
#Option "LVDSHL" # 
#Option "ForcePanelRGB" # 
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # 
#Option "CHTVLumaBandwidthSVIDEO" # 
#Option "CHTVLumaFlickerFilter" # 
#Option "CHTVChromaBandwidth" # 
#Option "CHTVChromaFlickerFilter" # 
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # 
#Option "CHTVContrast" # 
#Option "SISTVEdgeEnhance" # 
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # 
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # 
#Option "SISTVColorCalibFine" # 
#Option "SISTVColorCalibCoarse" # 
#Option "SISTVXScale" # 
#Option "SISTVYScale" # 
#Option "TVXPosOffset" # 
#Option "TVYPosOffset" # 
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # 
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # 
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # 
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # 
#Option "XvDefaultBrightness" # 
#Option "XvDefaultHue" # 
#Option "XvDefaultSaturation" # 
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # 
#Option "XvChromaMax" # 
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

Transparency Issues with PSD files in FCP 7

I'm having some weird file layer transparency issues with FCP 7. I'm working on a project that's made up entirely of graphics drawn in Photoshop CS5. They Photoshop settings were done to match an HDTV 1080i (16:9) sequence in FCP. In FCP, the pixels were set to square, field dominance to none, frame rate to 29.97 and compressor is Apple ProRes 422.
I exported my PSD files out of Photoshop, with each layer being exported to its own file. In general, things were fine, but there were a few files where you could see the outline of the character against the background, but mind you that this is only visible once the video is rendered out in the FCP timeline. Nothing is visible in Photoshop, nor is it visible while viewing from the Browser in FCP. I told this to the artist and he went back and made corrections, making sure everything was on a transparent background, but the result was still the same - once I rendered the graphics out in FCP, these edge lines were visible.
I then went back into Photoshop, opened all the files that were giving me trouble, clicked on the "foreground color" and changed it to a color other than white, then back to white and hit ok. That seemed to work - even when rendered out, I was getting no artifacts, until I tried enlarging the graphics over 100%.
Also, with some of the same graphics, I was trying to layer them so that a guy was in the foreground with other people and a van behind him in the background. Once again, no problem in Photoshop, but once brought into FCP, the background people were actually being displayed over the main foreground character.
I'm pretty baffled - what to do? I'll attach a photo of the weird lines around the characters. It might be hard to see at this size, but if you download and enlarge it to 300% or so, you'll see what I mean.

Just saw that Adam's original post was an older one. Will keep this here anyway to maybe help the most recent poster.
Sharon
Adam, did you try what David said about pointing to the root folder? Did that work?
When I copy the SD card, I name a new folder on my hard drive something specific, like Smith Wedding. Then I copy everything inside the SD card to that new folder. The first level inside my new folder now has folders for
AVF_INFO
PRIVATE
and on down from there. When you open Log and Transfer, point it to the Smith Wedding folder (of course whatever you have named yours).
ClipWrap2 also works great to convert the files beforehand if you want.
What camera are you using? I have the Sony NX30 and it was giving me fits because the .mts files don't ingest if the clips are longer than 11 min. My problem is that I'm still on FCP 6.0.6. I think 7.0.3 fixed that. But I did find enough work-arounds to keep the camera.
This is a link to the full discussion if you are interested.
https://discussions.apple.com/message/19085158#19085158
Sharon
Message was edited by: SSteele

Transparent page with outlined font for motion 5

I am trying to follow this tutorial. http://www.youtube.com/watch?v=scbXhiZy8uA
I need to create exactly what he does in the first minute of the video. A transparent background with outlined texts, I have the script nescessary to create the effect. I have zero experience with illustrator. Can someone provide a detailed step process or provide links to videos that will solve my problem.
Please watch the video to understand exactly what im having trouble with. Thank you.

What is your problem you forgot to mention it.
Keep in mind the background in illustrator is always transparent and you physically need to add a shape to fill it. The white background is just to make it easier to see the lines. You can turn on and off the checkboard pattern as you like (View>Show transparent grid) or ctrl-shift-d(windows)cmd-shift-d(mac)

Transparent design with router on both sides?

I am looking to solve a design which has to work in two scenarios. Preferably with an in-line solution.
1. Transparent design with VRF on both sides:
FW-VRF (Subnet A)
      |
      | (VLAN 11)      | ACE (Subnet A)
      |
      | (VLAN 12)
      |
LAN-VRF
      |
      | (VLAN 13)
      |
Real servers (Subnet B)
2. Transparent design in plain bridge mode
FW-VRF (Subnet A)
      |
      | (VLAN 11)      |
   ACE (Subnet A)
      |
      | (VLAN 12)
      |
Real servers (Subnet A)
As mentioned, I am aiming for a single design for both scenarios. A routed design will not pass in the first scenario and a one-arm solution will be inefficient in the second scenario. (both due to existing infrastructure) Is it possible to solve this with a transparent solution in both scenarios? I can't seem to get it to work.
Thanks in advance for any help!

I'm gonna expand my question a bit as I can not seem to get a working config in scenario 1. From the ACE I can ping the VRFs on both side of the ACE. I can on the other hand not ping neither the bvi-address of the ACE nor one VRF from the other. Can anyone notice any immediate errors in my config? Thanks in advance for any help!
Addresses:
10.3.66.1 - FW_VRF on client side
10.3.66.6 - LAN_VRF on server side
10.3.66.7 - BVI if on ACE
===Admin===
resource-class TEST_res
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-mz.A3_2_0.bin
hostname 4710Appl
interface gigabitEthernet 1/1
description Management port
switchport access vlan 752
no shutdown
interface gigabitEthernet 1/2
description Client side LAN
switchport trunk allowed vlan 2522
no shutdown
interface gigabitEthernet 1/3
description Server side LAN
switchport trunk allowed vlan 2524
no shutdown
interface gigabitEthernet 1/4
shutdown
access-list BPDU ethertype permit bpdu
access-list ALL line 8 extended permit ip any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
2 match protocol ssh any
3 match protocol icmp any
4 match protocol snmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 752
description Management VLAN
ip address 10.7.52.63 255.255.255.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 10.3.66.1
context TEST_context
allocate-interface vlan 752
allocate-interface vlan 2522
allocate-interface vlan 2524
member TEST_res
context TEST_context_routed
username admin password 5 $1$bale5EiS$bEdquz.bbcW3wRcfeSzbu/ role Admin domain
default-domain
username www password 5 $1$bsOdgxav$1uywtkwFEj3QalKaOTrkZ1 role Admin domain de
fault-domain
ssh key rsa 1024 force
===Application context===
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
2 match protocol ssh any
3 match protocol icmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 752
ip address 10.7.52.64 255.255.255.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 2522
description Client side VLAN
bridge-group 1
access-group input ALL
access-group output ALL
no shutdown
interface vlan 2524
description Server side VLAN
bridge-group 1
access-group input ALL
access-group output ALL
no shutdown
interface bvi 1
ip address 10.3.66.7 255.255.255.240
no shutdown
ip route 0.0.0.0 0.0.0.0 10.3.66.1

Stacks 100% transparent?

Ok I could have sworn my stacks used to have a semi-transparent background to them. i use my dock on the left side so my stacks are grids. my grid stacks are 100% transparent, which makes them hard to see the icons sometimes with other windows behind them.
Is anyone elses stacks totally transparent?

I have the same problem but repairing permissions doesn't work...
Everytime i restart or logout i have the opacity back for some hours and then it turns transparent again.
Some pics:
http://img443.imageshack.us/img443/6333/immagine2xc7.png
http://img443.imageshack.us/img443/6333/immagine2xc7.png

[SOLVED] window looks transparent but it don't have to

Hello everybody
I use openbox with cairo-composite and docky as starter it runs well but when I open a window it seems that the window menu (for example of Opera) looks transparent. the menubar loses color only the text is visible and the borders are partly hidden.
this problem is very complicate to explain. I hope you understand it otherwise I try to answer your questions about this problem.
What can I do about this problem, I need your help
thanks in advance
Troopa
Last edited by Troopa (2011-12-31 18:12:30)

IS something similar to his - look at the right upper corner. To me it happens when i use OpenGL from xorg-server-1.10.1 onwards. In KDE i don't see this issue but when i log in in XFCE with compiz i get this blank tooltips, menus,...
http://imageshack.us/photo/my-images/85 … 15421.png/
What is you graphic card? I have intel GMA4500.
Last edited by Shark (2011-12-28 17:35:34)

ITunes 6.0.1.3 downloads a video 100%, then fails with "An Unknown Error"

I've downloaded several videos from ITMS but the most recent one I've purchased will complete the download process and then fail. I've tried "check for purchases" several times and always get the same result - download the ~200 MB file, then fail when the progress bar is full.
I've tried disabling Grisoft AntiVirus, defragmenting the hard drive, chkdsk for errors (no errors), but I keep getting the same thing every time - about 8 tries):
[Red X graphic]
There was an error downloading your purchased music.
An unknown error occurred (0xFFFE7958).
Use the Check for Purchased Music command in the Advanced menu to try again later.
[OK]
I don't use iTunes for music - just for video downloads.
Any ideas?
dcs

Same problem here!!!
Three times I tried to download the D.Housewives and three times it failed. I did the check the purchased and was able to start again but everytime it got to either 99% or 100% it failed with a error but on the third time it failed I guess it triggered something and it no longer shows as Purchased Music. I contacted Apple and they told me I am out of luck!
Good thing my Ipod is less then 30 days old as it is going back to the store.
Here is their response after taking my $1.99 but no delivering the product!!!
Dear Steve,
Thank you for contacting the iTunes Music Store.
Per our terms of sale, all music/videos purchased from the iTunes Music Store is ineligible for refund. This policy matches our refund policies on open or downloaded software and provides protection for copy written materials.
For more information, please review all the Terms of Sale for the iTunes Music Store at http://www.apple.com/support/itunes/legal/policies.html.

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.

White box behind transparent images with drop shadow in InDesign CC 2014 (v.10) but not in InDesign CC (v.9)

Hi all,
Please can you help? No matter what settings I use in my print options in InDesign CC 2014 (v.10), ALL transparent images with a drop shadow are printing with a white box behind the image. If I remove the drop shadow, all prints fine. I know this is an old issue that happens with ID sometimes but I have been lucky enough to never have had it happen to me before! (All images are regular flattened TIFF images with clipping paths).
Also, feathered edges are not printing correctly and are sharp instead of feathered.
When I export the document to IDML and open it up in InDesign CC (v.9) all prints perfectly with no white boxes and feathered edges prints perfectly as well. I have compared all of the print settings (including color management, transparency flattener, etc.) between both versions and they are exactly the same. I am printing to a Xerox color laser printer. Can anyone offer any advice?
Thank you so much,
Christine

Okay...false alarm! It turns out that the issue was with my PRINTER settings (the settings you customize after hitting the “Printer” button at the bottom of the Print dialogue box in ID CC. I thought I had triple checked this but it seems there was one setting I missed earlier…adjusting the print brightness seemed to cause the issue. SO GLAD to know it was not InDesign…20 or so sheets/prints later….and thankful to know what was causing the issue! Thank you so much Steve for helping at any rate:) Much appreciated:)

Really interesting bug with Compiz, not sure how to label it

Hi forums, I really promise I searched around for this, so if this is a super common bug, I apologize in advance (I really wasn't sure how to even label what was happening). All I know is that when compiz is enabled, I'm getting super weird behavior in programs, mostly with terminal and system menus. The only way I know to show this is by a screenshot:
http://i66.photobucket.com/albums/h248/ … 0c7d62.png
As you can see from the pic, there are multiple menu objects highlighted (I promise I don't have 3 mouse pointers!). I couldn't capture this via screenshot, but the highlighted elements are actually alternating between this set and another. I could show more instances of this, but I think it would just be redundant. Another (possibly related) issue is the odd behavior in terminal. When I am using terminal to do something, be it accessing the AUR repository or editing a file somewhere, or anything really, the terminal scrolls up and down exactly 1 line, repeatedly (very fast). The only other place I experience significant issues is with compizconfig settings manager (ccsm). When trying to access a different menu, the ccsm window flashes very quickly back and forth to the previous menu screen. All of these things make it incredibly difficult to make selections. My browser (chrome) is fortunately exempt from this dilemma.
The only thing I know for sure is that this is caused by compiz. Disabling compiz (going back to xfwm or using another window manager) eliminates the issue. I hadn't had this issue until yesterday, but I really hadn't changed anything.
Things I've tried:
- Reinstalling compiz
- Enabling/Disabling Emerald
- Installing compiz-bzr
- Fooling with metacity
- Restarting
Any advice or words of wisdom on this would be very appreciated
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Thanks for the reply. I'm actually using a slightly older nvidia gpu (480 GTX) with nvida-340xx, which is what nvidia recommends. I've worked with changing video driver parameters, and nothing there has seemed to change this much. I was afraid this was being caused by a mistake of mine, but it seems more and more likely that this is a problem with compiz: to test, I made a virtual machine and installed arch there (same setup as mine, only completely fresh) and I'm having the same issues. I like compiz because of the amazing ability to theme and control the general appearance of my gui. Is there a good alternative that one of you all could recommend?
Last edited by MaroonR (2014-11-01 05:45:46)

No window decoration with Compiz using gtk-window-decorator

Hello.
I know this is and old problem with Compiz and ArchLinux, but no matter what I do, I can't make it work.
This happens when I try to use Compiz:
$ compiz --replace ccp &
[1] 2370
[user@userlaptop ~]$ Backend : ini
Integration : true
Profile : default
Adding plugins
Initializing core options...done
Initializing decor options...done
Initializing move options...done
Initializing resize options...done
Setting Update "command"
And this, if I try to run Compiz with fusion-icon, with o without the Dbus option:
$ fusion-icon
* Detected Session: gnome
* Searching for installed applications...
Backend : ini
Integration : true
Profile : default
Traceback (most recent call last):
File "/usr/bin/fusion-icon", line 57, in <module>
from FusionIcon.interface import choose_interface
File "/usr/lib/python2.7/site-packages/FusionIcon/interface.py", line 22, in <module>
from util import env
File "/usr/lib/python2.7/site-packages/FusionIcon/util.py", line 421, in <module>
decorators = CompizDecorators(_installed)
File "/usr/lib/python2.7/site-packages/FusionIcon/util.py", line 228, in __init__
self.command = context.Plugins['decoration'].Display['command']
KeyError: 'decoration'
Also, when i try to run compiz-manager, this is what i get:
$ compiz-manager
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
No whitelisted driver found
aborting and using fallback: /usr/bin/metacity
Here is my xorg.cong configuration file:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Option "AIGLX" "true"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "dbe"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "es"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
If I use compiz-check:
$ compiz-check
Gathering information about your system...
Distribution: Arch Linux
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: No rendering method in use (AIGLX, Xgl or Nvidia)
Other considerations:
"Window decorations", "Resize windows" and "Move windows" are checked in ccsm for user and root.
"gtk-window-decorator --replace" is set at the command field in "Window decorations" options.
My kernel version is 2.6.35-ARCH, and the video driver is ATI Catalyst 10.12 with Xorg 1.9.
Everytime I use compiz-manager, Gnome crashes.
Thank you for your time guys, I hope this information helps you to help me out.

That's not an option, I don't want to sacrifice video performance for a few effects.
Also, shouldn't be that way, why a distribution like ArchLinux, one of the best, has this kind of problems with Drivers.

Problem with Compiz Fusion 0.5.2 Internal Server Error

I trying compiz fusion 0.5.2 version, but I have this error:
$ sudo pacman -Sy compiz-fusion
:: Synchronizing package databases...
current is up to date
extra is up to date
community is up to date
compiz-fusion is up to date
:: group compiz-fusion:
ccsm compiz-bcop compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unsupported
compizconfig-python emerald emerald-themes libcompizconfig
:: Install whole content? [Y/n]
resolving dependencies... done.
looking for inter-conflicts...
:: compiz conflicts with compiz-git. Remove compiz-git? [Y/n]
done.
Remove: compiz-git
Targets: compiz-0.5.2-1 libcompizconfig-0.5.2-1 compizconfig-python-0.5.2-1 ccsm-0.5.2-1 compiz-bcop-0.5.2-1
compiz-fusion-plugins-main-0.5.2-1 compiz-fusion-plugins-extra-0.5.2-1
compiz-fusion-plugins-unsupported-0.5.2-1 beryl-core-0.2.1-1 emerald-0.2.1-1 emerald-themes-0.2.1-1
Total Package Size: 6.19 MB
Total Installed Size: 13.91 MB
Proceed with installation? [Y/n]
:: Retrieving packages from compiz-fusion...
error: failed retrieving file 'compiz-fusion-plugins-main-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
error: failed retrieving file 'compiz-fusion-plugins-extra-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
error: failed retrieving file 'compiz-fusion-plugins-unsupported-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
warning: failed to retrieve some files from compiz-fusion
error: failed to commit transaction (unexpected error)
What's the problem with this three packages?.
Best regards.

You can install the packages from AUR too (you will need to compile them).
Ive compiled the packlages with GNOME support and athlon optimizations and puted on my ftp:
http://download.tuxfamily.org/oproj/compizfusion/

[SOLVED] Conky 100% transparent bg with Compiz

Similar Messages

Maybe you are looking for