[SOLVED] Eagerly Fetch sequence-value in EJB-object

I've defined my EJB-object PERSON to use the DB-sequence PERSONS_SEQ, but the Sequence is only called when the data is persisted using the persistEntity-method.
Could somebody point me out how I can eagerly fetch the PERSON.personId attribute when the create()-method is called on the PersonsIterator?

I wasn't able to set it declaratively on the EJB bean and I'm not sure if it's possible because I couldn't find any info on the API-doc's.
I've created my own custom method to create a new object instead of using the pre-configured methods 'create, execute, setCurrentRowWithKey', which are available through using ADF.
Using my own create-method I've added a custom method that gets the next sequence value using the createNativeQuery()-method which is available in the EntityManager. I've created a blog about the solution and the case I was working out.

Similar Messages

Get value of field object when I double click on any column of report

Hi,
We are converting our projects from .NET 2003 to .Net 2008 and upgrading reports10 to crystal reports 2008 and changing our Active x report viewer control to crystal report viewer.
We donu2019t use reports just to see and print the data. Our use is a bit more.
As we were using Active X Control (CRAXDDRT) to perform different operations
Following are some functions which are included in our requirements:
1-     We need the columns width to be flexible which we can changed in the code dynamically according to the users wish
2-     Setting text of some fields dynamically from .Net code
3-     Hide and show the columns dynamically from .Net code
       Upto here we are done using crystal report 2008 and .net 2008
       Now we are stuck with problem
4-     When we double click on fieldobject at runtime we are able to fetch the value of field object by using e.objectinfo.text.tostring, so far it is perfect
But we have different situation here and need a solution for this
I have two fields like Account ID and Account Description
I need the solution so that when user clicks either on Account ID or Account Description I should be able to fetch the Field object value of Account ID Column only so that i will be able to open different forms and reports based on that ID
As we were doing it before using Active X Control the code snippet is giving below
case "Field: Account. AccountID ", "Field: Account.Description"
GlobalCode = GiveCode(mYFields.Item(1).value) '------ Where 1 refer to Account ID, so in both cases either we click Account ID or Description Field at run time we are able to return the account ID field value.
so we need solution some thing like that please do let us know how we can do that
For Your reference we were using CrystalActivexReportViewerLib10.CRVFields obejct to fectch the report values
Thanx in Advance
Regards,
Arshad Hussain Bhatt

Hello,
I am getting value of that cell where I am clicking. But I need the value of other columns also in that particular row where I double clicked. For this I gave one example also that suppose I have a report where there are two columns. One is AccountID and other is AccountDescription. Now if I click on Account ID I get the value of AccountID and when I click on AccountDescription I get the value of AccountDescripiton This is oK n good but I want that If i double click on AccountDescription I should be able to get the value of AccountID also.Please tell me is there anyway to do so?
We did so when we were using CRAXDRT.Report Bellow is the code snippet for how I did it in that.
Dim MyField As CrystalActiveXReportViewerLIb10.CRVFields
Private Function GiveFieldIndex(ByVal As CrystalActiveXReportViewerLib10.CRVFields, ByVal FldName As String) As Integer
For i as integer = 1 To FldArry.Count
    If FldArry.Item(i).name = FldName Then
                GiveFieldIndex = i
      End If
End Function
Private Sub CRViewer1_DoubleClick(ByVal eventSender As System.Object, ByVal eventArgs As AxCrystalActiveXReportViewerLib10._ICRViewerEvents_DblClickedEvent) Handles CRViewer1.DblClicked
If MyField.Name = "Field: AdoJV.AccountID" Or MyField.Name = "Field: AdoJV.AccountDesc" Then
/Following line will give us AccountID in anycase either we click on AccountID or Account Desc or even you can add more column by adding Or Operator. We need something like this in Crystal Report 2008/
Dim GlobeAddEditCode as String = myFields.Item(GiveFieldIndex(myFields, "Field: AdoJV.AccountID")).Value
End If
End Sub
Regards,
Arshad Hussain Bhatt
Edited by: arshhb on Oct 31, 2009 6:44 AM
Edited by: arshhb on Oct 31, 2009 7:09 AM
Edited by: arshhb on Oct 31, 2009 7:13 AM

Fetching next value of a sequence into a variable(TextField)

Hello All,
I have another little issue that i hope someone can resolve.
I need to grab the "nextval" from a sequence, insert it into a text field or variable then read this variable to create a record in two individual tables ( one is for a PK other is the relating FK in another table )
eg:
fetch sequence.nextval into :P1_item1
then
insert into mytable values (:P1_item1, ........ )
insert into myothertable values (somekey, :P1_item1, ........ )
I assume this needs to be in a process somewhere in the application but do not know where or the code to achieve it.
Any help will be much appreciated
Thanks
Robert

Thanks for your reply. Unfortunately i could not find my answer on the link you sent me.
Any other ideas ? or do u know the code i could use to make this work ?

Fetch table value in BEX Web report using Javascripts, and assign condition

Hi Gurus,
I am currently using WAD 3.5. I need to change the web report to behave like below :-
1. Default layout (Field A B C) with condition A & B activated.
2. If the drilldown Field B and C is removed, leaving only field B alone in the report drilldown, deactivate condition A & B, Activate condition C & D.
3. the above can be reversed where user drilldown field B & C into the layout, the condition A & B need to then be activated back.
So I believe this can be done using Javascript. So my questions are below
1.) How do i fetch table value for the navigationblock ? with navigationblock i am able to know what are the columns are in the drilldown (i will not display free characteristics, so ignore this part). how do i read the content of NAVIGATIONBLOCK_1 as shown in following code? using javascript.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="NAVIGATIONBLOCK_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="SHOW_FREE_CHARACTERISTICS" value=""/>
 <param name="SHOW_NAVIGATION_ICONS" value=""/>
 <param name="SHOW_FILTER_ICONS" value=""/>
 ITEM: NAVIGATIONBLOCK_1
</object>
2.) After question 1.) is done, please advice how do i activate/deactivate the conditions? based on the fields found in above. Maybe I can use IF navigationblock_1 contain field A only, then set condition A & B , etc.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="CONDITIONLIST_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CONDITION"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 ITEM: CONDITIONLIST_1
</object>
I would appreciate if we can solve Question 1 first before proceed to 2.)
Please advise. Thanks

Hi JTi,
what i have understood from your requirement is that you want to access the web item table_1 in javascript, you can get that as below:
Add

tag before your web item and set its id to table.

<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TABLE_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="CAPTION" value="jezel"/>
<param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
<param name="BLOCK_SIZE" value="0"/>
<param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
ITEM: TABLE_1

In javascript access it as :
var mytable = document.getElementsById("table");
Hope this helps
Thanks
Dipika

Unable to save Sequence value to Database

Hi,
I am trying to pupulate a sequence value so that I can use it as primary key along with the combination of other columns later. My problem is that the sequence value is getting populated on the page with the right value, But is not getting saved to the database. The Column is there in the VO. The column is blank on the table. When I print it(System.out.println("Seq=" + xSeq.getText(pageContext));), the value is null. Can anyone please advice what I am doing wrong OR if I am missing anything here.
Thanks
Ali
My CO file:
============
package lac.oracle.apps.lac.jobperf.server.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.webui.OADialogPage;
import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
import oracle.jbo.domain.Number;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.layout.OAMessageComponentLayoutBean;
import oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageStyledTextBean;
import com.sun.java.util.collections.HashMap;
import oracle.bali.share.util.IntegerUtils;
import oracle.apps.fnd.framework.server.OADBTransaction;
* Controller for ...
public class ReviewCreateCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
OAApplicationModule am; // dave
OADBTransaction oadbxn; // dave
oracle.jbo.domain.Number Seq;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
// Always call this first
super.processRequest(pageContext, webBean);
am = pageContext.getApplicationModule(webBean); // dave
oadbxn = am.getOADBTransaction(); // dave
OAPageLayoutBean pageLayout = pageContext.getPageLayoutBean();
OAMessageComponentLayoutBean mainRn = (OAMessageComponentLayoutBean)pageLayout.findIndexedChildRecursive("MainRN");
// If isBackNavigationFired = false, we are here after a valid navigation
// (the user selected the Create Review button) and we should proceed
// normally and initialize a new Review.
if (!pageContext.isBackNavigationFired(false))
// We indicate that we are starting the create transaction(this
// is used to ensure correct Back button behavior).
TransactionUnitHelper.startTransactionUnit(pageContext,"jobperfCreateTxn");
// This test ensures that we don't try to create a new review if we
// had a JVM failover, or if a recycled application module is activated
// after passivation. If this things happen, BC4J will be able to find
// the row you created so the user can resume work.
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
// String Seq = (String)oadbxn.getValue("Seq");
oracle.jbo.domain.Number Seq = oadbxn.getSequenceValue("lac.LAC_CM_PERF_REVIEW_SEQ");
OAMessageStyledTextBean xSeq = (OAMessageStyledTextBean)mainRn.findIndexedChildRecursive("Seq");
xSeq.setText(Seq.toString());
am.invokeMethod("createReview",null);
// Initialize the ApplicationpropertiesVO for PPR.
// am.invokeMethod("init");
else
if (!TransactionUnitHelper.isTransactionUnitInProgress(pageContext,"jobperfCreateTxn", true))
// We got here through some use of the browser "Back" button, so we
// want to display a stale data error and disallow access to the page.
// if this were a real application, we would propably display a more
// context-specific message telling the user she can't use the browser
//"Back" button and the "Create" page. Instead, we wanted to illustrate
// how to display the Applications standard NAVIGATION ERROR message.
OADialogPage dialogPage = new OADialogPage(NAVIGATION_ERROR);
pageContext.redirectToDialogPage(dialogPage);
} // end processRequest()
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
{ //super.processFormRequest(pageContext, webBean);
// Always call this first.
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAPageLayoutBean pageLayout = pageContext.getPageLayoutBean();
OAMessageComponentLayoutBean mainRn = (OAMessageComponentLayoutBean)pageLayout.findIndexedChildRecursive("MainRN");
// Pressing the "Apply" button means the transaction should be validated
// and committed.
// OAPageLayoutBean pageLayout = pageContext.getPageLayoutBean();
// String Seq = SeqText.getText(pageContext);
oadbxn.putValue("Seq", Seq);
am = pageContext.getApplicationModule(webBean);
oadbxn = am.getOADBTransaction();
if (pageContext.getParameter("Apply") != null)
// Generally in the tutorial application and the labs, we've illustrated
// all BC4J interaction on the server (except for the AMs, of course). Here,
// we're dealing with the VO directly so the comments about the reasons
// why we're obtaining values from the VO and not the request make sense
// in context.
OAViewObject vo = (OAViewObject)am.findViewObject("jobperfVO1");
// Note that we have to get this value from the VO because the EO will
// assemble it during its validation cycle.
// For performance reasons, we should generally be calling getEmployeeName()
// on the EmployeeFullVORowImpl object, but we don't want to do this
// on the client so we're illustrating the interface-appropriate call. If
// we implemented this code in the AM where it belongs, we would use the
// other approach.
String employeeName = (String)vo.getCurrentRow().getAttribute("FullName");
// We need to get a String so we can pass it to the MessageToken array below. Note
// that we are getting this value from the VO (we could also get it from.
// the Bean as shown in the Drilldwon to Details lab) because the item style is messageStyledText,
// so the value isn't put on the request like a messaqeTextInput value is.
String employeeNumber = (String)vo.getCurrentRow().getAttribute("EmployeeNumber");
//ma String employeeNum = String.valueOf(employeeNumber.intValue());
//ma Number employeeNumber = (Number)vo.getCurrentRow().getAttribute("EmployeeNumber");
//ma String employeeNum = String.valueOf(employeeNumber.intValue());
// Simply telling the transaction to commit will cause all the Entity Object validation
// to fire.
// Note: there's no reason for a developer to perform a rollback. This is handled by
// the framework if errors are encountered.
OAMessageStyledTextBean xSeq = (OAMessageStyledTextBean)mainRn.findIndexedChildRecursive("Seq");
System.out.println("Seq=" + xSeq.getText(pageContext));
am.invokeMethod("apply");
// Indicate that the Create transaction is complete.
TransactionUnitHelper.endTransactionUnit(pageContext, "jobperfCreateTxn");
// Assuming the "commit" succeeds, navigate back to the "Search" page with
// the user's search criteria intact and display a "Confirmation" message
// at the top of the page.
MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName),
new MessageToken("EMP_NUMBER", employeeNumber) };
OAException confirmMessage = new OAException("PER", "LAC_FWK_TBX_T_EMP_CREATE_CONF", tokens,
OAException.CONFIRMATION, null);
// Per the UI guidelines, we want to add the confirmation message at the
// top of the search/results page and we want the old search criteria and
// results to display.
pageContext.putDialogMessage(confirmMessage);
HashMap params = new HashMap(1);
// Replace the current employeeNumber request parameter value with "X"
params.put("employeeNumber", "employeeNumber");
// IntegerUtils is a handy utility
params.put("employeeNumber",IntegerUtils.getInteger(5));
pageContext.forwardImmediately(
"OA.jsp?page=/lac/oracle/apps/lac/jobperf/webui/jobperfPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
params, //null,
false, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES);
else if (pageContext.getParameter("Cancel") != null)
am.invokeMethod("rollbackReview");
// Indicate that the Create transaction is complete.
TransactionUnitHelper.endTransactionUnit(pageContext, "jobperfCreateTxn");
pageContext.forwardImmediately("OA.jsp?page=/lac/oracle/apps/lac/jobperf/webui/jobperfPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
false, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
} // end processFormRequest()
}

Hi Tapash,
Thanks for all of you guys(Tapash/Sumit/user550094) help. The sequence is working and also populating the values in the table when I do not have any validation checks imposed on it.
If I add any validations as mentioned in the exercise for create page where it checks if the sequence can be updated while null and so on... and throws appropriate exception. I get error. That is the code that I mentioned above.
Here is the validation code for EOImpl:
As mentioned below in order for the code to compile and work I had to comment the "throw new OAAttrvalException". If I uncomment the
"throw new OAAttrvalException" part, it gives me the following error while compiling:
"Error(796,13): method getPrimarykey not found in class lac.oracle.apps.lac.jobperf.schema.server.jobperfEOImpl"
public void setSeq(Number value)
// Because of the declaritive validation that you specified for this attribute,
// BC4J validates that this can be updated only on a new line, and that this,
// mandatory attribute cannot be null. This code adds the additional check
// of only allowing an update if the value is null to prevent changes while
// the object is in memory.
if (getSeq() != null)
/* throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), //getSeq(), // EO name
getPrimarykey(), // EO PK
"Seq", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_NO_UPDATE"); // Message name */
if (value != null)
// Seq ID must be unique. To verify this, check both the
// entity cache and the database. In this case, it's appropriate
// to use findByPrimaryKey() because you're unlikely to get a match, and
// and are therefore unlikely to pull a bunch of large objects into memory.
// Note that findByPrimaryKey() is guaranteed to check all employees.
// First it checks the entity cache, then it checks the database.
OADBTransaction transaction = getOADBTransaction();
Object[] employeeKey = {value};
EntityDefImpl empDefinition = jobperfEOImpl.getDefinitionObject();
jobperfEOImpl Seq =
(jobperfEOImpl) empDefinition.findByPrimaryKey(transaction, new Key(employeeKey));
if (Seq != null)
/* throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // .getSeq(), // EO name
getPrimaryKey(), // EO PK
"Seq", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_UNIQUE"); // Message name */
// Note that this is the point at which the value is actually set on the EO cache
// (during the scope of setAttributeInternal processing). If you don't make this
// call after you perform your validation, your value will not be set correctly.
// Also, any declarative validation that you define for this attribute is executed
// within this method.
setAttributeInternal(SEQ, value);
} // end SetSeq
I am sorry if I have confused you. I really did not mean to do it.
Thanks,
Ali

Field value(s) for object S_SERVICE were not entered

Hi
Whenever I try to generate a profile in PFCG I get an error, that is saying;
... field value(s) for object S_SERVICE were not entered
Number of values could be different but message text is always the same.
The problem is in CRM2007 IDES.
It is regardless if I try to generate for existing role (like SAP_CRM_UIU_MKT_PROFESSIONAL) or for own role
Does anybody know how to solve such issue ?
regards
Rafal

Dear Rafal,
kindly check documentation of customizing node
SAP Customizing Implementation Guide
    Customer Relationship Management
      UI Framework
       Business Roles
         Define Authorization Role
"Make sure that the authorization object S_SERVICE is set to inactive.
An active authorization object S_SERVICE could interrupt the profile
generation."
You have to deactivate the S_SERVICE authorization object in PFCG to
solve the error.
Hope this helps,
Gerhard

Getting error while reset sequence value

i hve created two table. and a sequence for other table. i want to do that when i insert into a first table, entries of other table should be deleted and sequence value should reset to 1. For that i have executed the following sql code
but getting the error:
create or replace Trigger m_sale_ainsert_trig
after insert on m_sale_bill
for each row
begin
DELETE FROM M_TEMP;
<<COLUMN_SEQUENCES>>
BEGIN
Alter Sequence M_TEMP_SEQ Restart with 1;
END COLUMN_SEQUENCES;
end;
Alter Trigger m_sale_ainsert_trig enable;
Warning: execution completed with warning
Trigger m_sale_ainsert_trig Compiled.
Alter Trigger m_sale_ainsert_trig succeeded.
5/4 PLS-00103: Encountered the symbol "ALTER" when expecting one of the following:
( begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
continue close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe purge
pls rectify it!!!!! what are the mistakes in this code?
Edited by: JKMourya on Mar 21, 2013 10:55 AM

JKMourya wrote:
i hve created two table. and a sequence for other table. i want to do that when i insert into a first table, entries of other table should be deleted and sequence value should reset to 1. For that i have executed the following sql code
but getting the error:
create or replace Trigger m_sale_ainsert_trig
after insert on m_sale_bill
for each row
begin
DELETE FROM M_TEMP;
<<COLUMN_SEQUENCES>>
BEGIN
Alter Sequence M_TEMP_SEQ Restart with 1;
END COLUMN_SEQUENCES;
end;
Alter Trigger m_sale_ainsert_trig enable;
Warning: execution completed with warning
Trigger m_sale_ainsert_trig Compiled.
Alter Trigger m_sale_ainsert_trig succeeded.
5/4 PLS-00103: Encountered the symbol "ALTER" when expecting one of the following:
( begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
continue close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe purge
pls rectify it!!!!! what are the mistakes in this code?
Edited by: JKMourya on Mar 21, 2013 10:55 AMDDL inside PL/SQL is NOT allowed
you must (ab)use EXECUTE IMMEDIATE

Error trying to run SSIS Package via SQL Server Agent: DTExec: Could not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object

Situation:
SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
Windows 7 - 64 bit.
The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
It uses 3 package variables:
*) SQLCommand (String) to specify the SQL Statement to be executed by the package
Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
Value: f:\Output Data.xls
*) EXCELOutputFIle (String) to specify path and filename of the Excel output file
Property path: \Package.Variables[User::SQLCommand].Properties[Value]
Value: select * from CartOrder
*) VarObjectDataSet (Object) to hold the data returned by SQL Server)
Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
Value: System.Object
It consists out of 2 components:
*) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
*) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only. This makes me wonder if it is uberhaupt possible to set the value of a package variable
of type Object.
Can anybody help me on this please ?
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 6:40:20 PM DTExec: Could
not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object. Started: 6:40:20 PM Finished: 6:40:21 PM Elapsed: 0.281 seconds. The package execution failed. The step failed.
Thank you very much in advance
Jurgen

Hi Visakh,
thank you for your reply.
So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
first question about the object type package variable.
Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
Thx in advance
Jurgen
Yes exactly
You need to set values only forthem which needs to be controlled from outside the package
Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

ORA-01405: fetched column value is NULL

Hi All,
I am using OWB 10gR2 and DB 10gR2. I am getting the following error while executing the mapping,
ORA-01405: fetched column value is NULL.
I have used NVL function for the measure columns, but the problem is not solved.
Can anybody please tell me solution,
Thanks in advance,
Siva

Hi Siva
It may be that you've taken care of null value in just one place and now, the error is coming
from somewhere further down the line.
Regards
Arif

How to resolve ORA-01406: fetched column value was truncated

I tried to export with the parameter full=yes....when i did tat i ma gettin ORA-01406: fetched column value was truncated error...
the following gives the sequence
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
EXP-00008: ORACLE error 1406 encountered
ORA-01406: fetched column value was truncated
EXP-00000: Export terminated unsuccessfully
pls revert back with an answer....

http://www.orafaq.com/forum/t/145219/2/

Prevent skipping sequence value?

We created a sequenential PK populated from a another database table. We take value from this table and update last sequence value.
( IN ADF faces 11g app)
But if an error in commit processing of page, sequence is populated on the screeen. Error can be formatting error, validation error or etc
Then we correct format mistakes a new number is popolated at PK field.
So some values are skipped.
How can we prevent skipping sequence value? it is very important issue in our bussiness case.
Thanks...

We write code in doDML metdod of entity object as following mypackage.getmaxno().
We can posponed getting max no formatting till commit time. Where we need to write code to prevent the gap ?
protected void doDML(int operation, TransactionEvent e) {
if(operation==DML_INSERT){
String sql="{?= call mypackage.getmaxno()}";
CallableStatement cs=getDBTransaction().createCallableStatement(sql,0);
try {
cs.registerOutParameter(1,OracleTypes.VARCHAR);
cs.execute();
String MaxNo=cs.getString(1);
setMaxNo(evrakNo);
createDoc();
} catch (SQLException f) {f.printStackTrace();}
super.doDML(operation, e);
}

BRF -fetch formula value set in the expression

Hi expert.
My question is how to fetch formula value set in expression of BRF.
Here is my scenario.
For SC object BUS212 is have maintained the 2 levels approval process as below .
object type u2013 BUS2121
Process schema - 3C_SC_700_002
100-approval-u2018                 ' u2013 u2018        ' u2013 RR_EMPLOYEE- Specify Employee for Approval- 365-40007953- ' ' -dec entire doc.
200-approval- AMT_LIMITu2013 limit ck u2013 RR_EMPLOYEE- Specify Employee for Approval- 250- 40007953- ' '-decision for entire doc.
For second level approval system checks for SC cart total amount .
In the BRF the expression type 0FB001u2019 (CL_FORMULA_BRF) is created for event (AMT_LIMIT ) is EX_AMT_LIMIT_2
here
Expression is of type u20180FB001u2019 (CL_FORMULA_BRF ), formula editor
Has condition 0V_SC_TOTALVALUE ( Overall value) > 10000 (number)
The process levels are maintained in table u2018 /SAPSRM/C_WF_Lu2019 here I got the EVENT> AMT_LIMIT.
800         BUS2121              3C_SC_700_002                100         A             RR_EMPLOYEE 365                                  40007953
800         BUS2121              3C_SC_700_002                200         A             RR_EMPLOYEE 304         AMT_LIMIT        40007954
In table TBRF210 I got event and Expression relation
800         A             SRM_WF             AMT_LIMIT                        A             EX_AMT_LIMIT_2
In table TBRF200 I got the BRF expression EX_AMT_LIMIT_2 and object OV_SC_TOTALVALUE relation
800         A             SRM_WF             F              EX_AMT_LIMIT_2                            F              A             0V_SC_TOTALVALUE
Now here is my problem how to fetch condition 0V_SC_TOTALVALUE ( Overall value) > 10000 (number)
Suggest the Class-method , tables or FM to fetch this 10000 value against    0V_SC_TOTALVALUE ( Overall value).
Warm Regards.
Indranil Panzade

Hi ,
first thanks for taking the interest in this thread .
I need this data matinated in BRF expression for my custome (report and pplication)purpose.
here i maintained the value 10000 for SC total amount against some EXPRession .
that i want to show in my report's column like this
Object- process levels-EVENT-EXPRESSION-valid amount(EXP.formula amt) -reposible person(AHUJA)plant-(1000).
wants more explaination ,
please reply.
Indranil

Insert multiple rows in on table and retreive sequence values

Hello,
I'm searching a way to insert several rows in a table that needs a sequence and retreive its.
For one row i use ExecuteScalar method with the following SQL is :
INSERT INTO MY_TABLE(MY_PK)
VALUES(SEQ_MY_TABLE.NEXTVAL) RETURNING MY_PK INTO :MY_PARAMETER
The aim is to insert several rows at one time. Currently I execute this SQL :
INSERT INTO MY_TABLE(MY_PK, MY_VALUE)
SELECT SEQ_MY_TABLE.NEXTVAL, MY_VALUE
FROM (
SELECT 0 MY_VALUE FROM DUAL UNION ALL
SELECT 1 MY_VALUE FROM DUAL
This query works well but i'm wondering how to retreive all sequence values generated by this query.
Is it possible and how ?
Thank you.
Sebastien

I tried this :
string sql = "INSERT INTO MY_TABLE(MY_PK, MY_VALUE) " +
"SELECT SEQ_MY_TABLE.NEXTVAL MY_PK, MY_VALUE FROM ( " +
"SELECT 0 MY_VALUE UNION ALL " +
"SELECT 1 MY_VALUE) " +
"RETURNING MY_PK BULL COLLECT INTO : RETURN_IDS";
using(var manager = myFactory.CreateDbManager()) // Initializes the connection and encapsulates ADO objects
manager.SetCommand(sql);
var cmd = (OracleCommand)manager.Command;
cmd.ArrayBindCount = 2;
var p = new OracleParameter();
p.DbType = DbType.Int64;
p.ParameterName = "RETURN_IDS";
p.Direction = ParameterDirection.Output;
p.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p.Size = 2*sizeof (long);
cmd.Parameters.Add(p);
cmd.ExecuteNonQuery();
var result = (Oracle.DataAccess.Types.OracleDecimal[])p.Value;
But I have an error ORA-00933 that indicates that the query is wrong at "RETURNING MY_PK".
.......................................................................................................^
Edited by: CITnDev on 1 août 2012 13:00
Edited by: CITnDev on 1 août 2012 15:10

How to declare value null to object at the end of jsp page.

Hi
I have two doubts.
1. Im getting request from request.getParameter() method. i stored that value in one object. after process completion i have set null value to object at the end of jsp page.
2. I declare jsp scriptlet within the javascript. in that jsp scriptlet i set session.setAttribute() values. i want to get the session.getAttribute value after javascript code completion.
i tried but i got jasperException.
please help me to solve this problem
Thank u in advance

Hai Sundaram,
when ever u got the param from request at that time only u set the same parameter to null..
i am not sure abt this is my idea only

Fetch dynamic value form a web.element of Web applicaiton

Hi,
How can I fetch the dynamic value/values displayed on the web page?
For Textbox we can use .getattribute("value") method.
temp1 = web.textBox(64,"/web:window[@index='0' or @title='Regular Entry']/web:document[@index='3' or @name='TargetContent']/web:form[@name='win0' or @index='0']/web:input_text[@id='DISTRIB_LINE_MERCHANDISE_AMT$0' or @name='DISTRIB_LINE_MERCHANDISE_AMT$0' or @index='27']").getAttribute("value");
How about retrieveing value for web.element object?
web.element(314,"/web:window[@index='0' or @title='Regular Deposit']/web:document[@index='3' or @name='TargetContent']/web:label[@index='1' and @text='Deposit ID:' and @className='PSEDITBOXLABEL' and @innerText='Deposit ID:']").click();
Here for /web:label[@innertext='Deposit ID:'] I need to fetch dynamic value displayed against Deposit ID.
Can anyone please help?
Thanks
Bhaskar

Hi Bhaskar,
You can fetch a value dynamically using the Syntax,
]").getAttribute("*text*");
Hope this Helps,
Nishanth Soundararajan.
Edited by: user9277220 on Apr 26, 2010 8:43 PM
Edited by: user9277220 on Apr 26, 2010 8:43 PM

[SOLVED] Eagerly Fetch sequence-value in EJB-object

Similar Messages

Maybe you are looking for