[SOLVED] Format unbound selectInputDate field to "MM-dd-yyyy"

I'm trying to format an unbound inputDate field to a different format. For entity-bound fields it's easy, they seem to inherit the format from the entity.
I expected to be able to specify a format using this but it doesn't seem to work:
<af:convertDateTime pattern="MM-dd-yyyy"/>
What am I missing?
Message was edited by:
btw11111

I posted too soon... it worked after I compiled. I thought the JSF would get picked up at runtime in JDev.
<f:convertDateTime pattern="MM-dd-yyyy" type="date" dateStyle="short"/>

Similar Messages

Invalid date format for 'Created' field in the getVersions web service Response.

Hi all,
I am trying to get all versions for selected document by calling getVersions method Versions.asmxweb service, but getting ‘Created’ date attribute value is in the format "29-05-2012 12:01"
but I am expecting either one of the following date formats.
1.      yyyy-MM-dd HH:mm:ss or yyyy-MM-ddTHH:mm:ssz
2.      MM/dd/yyyy HH:mm a   (a means AM/PM)
3.      MM/dd/yyyy
4.      yyyyMMdd HH:mm:ss
where do I need to change?
what are all the formate will be support by SharePoint?
please find attached response xml of getVersions call.
<results xmlns="http://schemas.microsoft.com/sharepoint/soap/">
    <list id="{6A6F6CD1-2E9C-44CC-B1F5-56G7JB5C8778}"/>
    <versioning enabled="1"/>
    <settings url="http://hbngjfgj47s20/reg/_layouts/LstSetng.aspx?List={7S6F6CD1-2E9C-44CC-B1F5-KO9J8Y7Y6H78}"/>
    <result version="@0.3" url="http://vmesxsrv47s20/register/Shared Documents/Parent/child/my_doc" created="29-05-2012 12:01" createdRaw="2014-12-02T12:46:02Z" createdBy="my_dom\agi_sharepoint"
createdByName="AGI_Sharepoint" size="288" comments=""/>
    <result version="0.1" url="http://hbngjfgj47s20/register/_vti_history/1/Shared Documents/Parent/child/my_doc" created="29-05-2012 10:01" createdRaw="2014-12-02T10:55:18Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
    <result version="0.2" url="http://hbngjfgj47s20/register/_vti_history/2/Shared Documents/Parent/child/my_doc.txt" created="29-05-2012 11:01" createdRaw="2014-12-02T10:59:25Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
</results>
Kindly help me on this.

Hi,
According to your post, my understanding is that you want to change date format for ‘Created’ field in the getVersions web service.
Per my knowledge, you can get the date format for ‘Created’ field as “MM/dd/yyyy HH:mm a”.
For more information, you can refer to:
Versions.GetVersions Method (Versions)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

Format of Date field is loading wrongly in the Infocube 0pp_c01.

Hi,
Format of Date field is loading wrongly in the Infocube 0pp_c01. But it is loading properly into PSA.
I am loading data into PP infocubes from the following DataSources.(they all are 3.x datasources)
1. 2LIS_04_P_MATNR
2. 2LIS_04_P_ARBPL
3. 2LIS_04_P_COMP
The data is coming properly upto PSA. For example Actual Start date is loaded in cube like 733.884.
And, it is the same issue with all the cubes. So I checked the update rules. But, in it the mapping is done properly.
Thanks $ Regards
Shyne Sasimohanan
+91-9632674245

Hi,
HEre also value is loaded correctly. The reason u are seeing it in this format is because it is mapped into a key figure in the info cube.
It will store the value as number of days from a standard date like 1/1/1000 or 1/1/1900 - not sure which one of these, u should be able to search and find the correct date in the forums..but this is the logic behind it
Hope it helps.
Regards,
Rathy

How to format a numeric field in ES2 ?

Hi...
I'm trying to format a numeric field in LiveCycle designer using six digit and allowing zero's "000000"…
I went to patterns for setting the format, unfortunately I couldn't know how figure it out?
I’ve tried this pattern: null{}|zero{000000}|num.integer{}
It didn’t work!
what actually I’m looking for is six digit at all time for instance if enter value of 1 in the field expect to appear 000001 ,and if i enter value 567 the appearance will be 000567 in the field and so on...etc.
Another issue is how to validate a range of numeric value like 000001-999999 so that the input will be only restricted by those values…
Hope this is clear! And sorry for my bad English
Best Regards...

Hi,
could you please share your solution?
I have a similar problem. I need to allow zeros before my integers to be inputed to the form.
thanks.
Please see my posting here:
http://forums.adobe.com/thread/870306?tstart=0

Add a carriage return in a Unbound String Field

Post Author: Razzle00
CA Forum: Formula
Hi,
How can I add a carriage return to an unbound string field in a crystal report. I am using the bundled version of CR with MS Visual Studio 2003 & 2005. My formula needs to look something like this....
'Heading One:' + CARRIAGE RETURN + trim({tablename.fld_1}) + CARRIAGE RETURN + 'Heading Two:' + CARRIAGE RETURN + trim({tablename.fld_2})
this code all needs to be in 1 unbound string field. Is this possible?
Thanks,
Razzle

Post Author: SKodidine
CA Forum: Formula
To add a carriage return, add CHRW(13)
For example:
'Heading One:' & chrw(13) & 'sample text';
will result in:
Heading One:
sample text

How to format large number field in XML so that it appears as is in Excel

Hi
I need help in formating the number field so that the number displays completely in Excel.
Ex: 12345678889453 and this appers in Excel as 1.23457E+13
Please let me know if you have any idea on this.
Thanks

Hi friends,
Thanks to all of you that you all have replied my question and given your answers.
Thanks to all of you specially Alpana Phapale, Wallie Chang, Poonam Thorat and Raghavendra Gadhamsetty, the answers given by you is the perfect one may be in different ways and only one can be used by me. But your answers were exactly correct.
Thanks to Asha Lund, your answers is also correct but the result as per my report should be in figures and not in words.
Whatever it may be but for repling thanks to you too.
Please be always with me, I am very new to Crystal Report and just learnt by my own as my Boss ordered me to do this and I have to make about 50 reports within 15 days. I think the day will start from today.
Well friends thanks a lot again for all your effort.

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

Format Date Form Field in Adobe Acrobat Pro

Thanks in advance for your help. I have date fields in an Acrobat form. Is it possible to create a script to format a date as either MM/DD/YYYY or MM/DD/YY? In other words, if someone enters MM/DD/YYYY, the date would be accepted and MM/DD/YY would also be accepted. Thanks, again.

Since the time measurement is based on a sattilite revolving around another object in space, much of the concepts and measurements apply to rocket science. But I do not know if all rocket scientist woudl get it. Wasn't there a sattilite that mixed miles and kilometers within the navigation program with a suprising result.
One needs to get to a common unit and then just do the math.
Actually JavaScript does have an adjustment for the Date.getYear if the date object is established with the 4 digit year.
I had a recent issue at work. I work from the U.S and have to access data on a server in the UK using Remote Desktop and the remote deskto is configured for the UK date format unless the user changes it. In prior years the data was processed on servers in the U.S. with U.S. date format. There were many instances when the date and month were swithed and requires over a month to fix. Thank you Microsoft Certified Network Administrators.

Formatting a date field

I am trying to format a date field so that it shows as 06/29/2005 instead of 06/29/2005 00:00:00. Im thinking that I need to use the Substr function to do this but cant get it to work. Here is what I have, @(Substr(REQUIRED_DATE,1,10)). Any help would be great.

The field is set up as a text field. From what I have read in Help, $date20 is for when you want to make a field be the system date. I want to change the format of a date that is being pulled from my database. Can I use the $date20 function for this? Thanks

LOV for an unbound input field in ADF-JSP

Hi i have a web app using ADF BC, struts , JSP.
Jdev - 10.1.2
JHS - 10.1.2
I have a text field <input type="text" value="solution">
I need to populate this UNBOUND input field with a value from an LOV which pops up in a separate window.
I need help right from the beginning... which i guess wud be to create a VO for it.. i have never done it earlier so any help wud be useful.

Hi,
try
<BODY onload="document.DataForm.EmployeeId.focus()">
where EmployeeId needs to be substituted by the name used in the textfield property
<html:text property="EmployeeId"/>
If this was Empno then the example would be
<html:text property="Empno"/>
and
<BODY onload="document.DataForm.Empno.focus()">
Frank

When formatting a date field in a where clause the template put dot instead of comma

Hello to Headstart Workers !
In a query find block the template construct a where clause, in some cases, and i dont know when the template is formatting a date field putting a dot instead of a comma.
Ex.: to_date('19-01-2001'.'DD-MM-YYYY')
Anybody knows why or where the template do this.
Congratulations
Nelson

- We created it using the HS utilities.
- "nls_numeric_character = ,.".
- it onky happen when the field date is not the first field in the where clause.
- i can see the problem just after pressing find button, already in the ls_block in last_query.
- the find_query works normally but cannot edit any line in ls_block.
Hope that i had helping
Regards
Nelson
null

Can't format a char field as a date

I have a char field coming in from a table that really is a date. I wanted to display the YYYYMMDD char field as MM/DD/YYYY.
I could not get any conversion (CDate) to work and I can't figure out how to set field[0,4] = year and so on, so I could come back and build the string.
Can somebody help me?

I have a field that should be a DATE type, but is instead a VARCHAR2(8). The data in the VARCHAR2(8) field is displayed as what looks like a date -- EX: 09/18/09. I need to be able to convert the VARCHAR2(8) field so that it brings back the spelled out month plus the numeric day and year -- EX: September 18, 2009.
I've been able to successfully convert a DATE type to the needed format (September 18, 2009) using the following syntax line, but now need to convert the VARCHAR2(8):
to_char(jud_report_hear_off_v.incdate,'fmMonth dd, yyyy,') as INCDATE
Your help is appreciated!!!

Date format(for number fields)

Hi there.
I'm creating some sql queries wich will be executed by some users throught the Oracle client PL/SQL, and I need to format some fields in date format.
Those fields are NUMBER(8) and they are in that format: "YYYYMMDD"
The format I want to put that information is: "DD.MM.YYYY".
What's the easiest way to do that?
The version that I'm using is Oracle 9.2.0.4.0.
Thanks by the way.

Hi,
Use TO_CHAR to convert the number to a string,
use TO_DATE to convert the string to a date, then
use TO_CHAR to format the date.
TO_CHAR ( TO_DATE ( TO_CHAR ( numeric_column
                            , 'fm00000000'
                  , 'YYYYMMDD'
        , 'DD.MM.YYYY'
        )This shows why storing dates in some other kind of column is a bad idea.

Reports 6: Character format within the field

Is it possible to apply different types of formatting (bold,italic,font size changes and font type changes) to a text within same field using Oracle Reports 6i? We are generating PDF files using Oracle Reports (legal documents) that must have proper formatting within the field and can't find way of doing it dynamically. Text for the field is pulled from the database - it is not hard-coded in report.
Is this available in Ver 9/10?
Thanks,
Dejan Bogojevic

Hi Dejan,
You can get the desired output in HTML format in 9i/10g. Look at the "Contains HTML Tags" property in Builder Online Help. However, for PDF output this is not currently supported.
Navneet.

[SOLVED] Format unbound selectInputDate field to "MM-dd-yyyy"

Similar Messages

Maybe you are looking for