[SOLVED] Generated grub file contains syntax error

I haven't touched any of /etc/default/grub and /etc/grub.d/*
Here's generated file containing syntax errors:
http://pastebin.kde.org/p39g742cg/kn73gf
Last edited by dlh (2013-12-09 18:59:57)

Well the errors show up when:
grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-ck
Found initrd image: /boot/initramfs-linux-ck.img
Found Windows 8 (loader) on /dev/sda1
error: out of memory.
error: syntax error.
error: Incorrect command.
error: syntax error.
Syntax error at line 159
Syntax errors are detected in generated GRUB config file.
Ensure that there are no errors in /etc/default/grub
and /etc/grub.d/* files or please file a bug report with
/boot/grub/grub.cfg.new file attached.done

Similar Messages

Save style sheet failed : Transformation contains syntax error.

Hello experts,
We are facing a problem, your valuable suggestion can help us to solved the problem.
Brief on system ladsacpe. We are using XI between R/3 and SRM.
Basically we are sending PO IDoc (ORDERS02) to SRM via XI. It also successfuly passed to SRM via XI. In XI SXMB_MONI i can see the checkred flag. Now in SRM SXMB_MONI the flag becomes Red and it shows Below error when i clcik on flag.
" Save Stylesheet failed /1SAI/TXSD5BFE2D6C24B57C0071F:
Transformation /1SAI/TXSD5BFE2D6C24B57C0071F contains syntax error " *
After this error when i check XI SXMB_MONI again, the flag is chekred but Acknowledgement status has error. and the Same error i can see in XI SXMB_MONI.
I think this error is coming when acknowleding back to XI to R/3.
But dont know how to solved?
Can you guys please help.
Thanks in Advance.
Aakash.

Hi Aakash
Try have a look at SAP Note Number: [1157004|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_dwb/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313537303034%7d]
Best regards,
Chris

Apex Listener 2.0.3.221.10.13 File path syntax error: ILLEGAL_CHARACTER

Hi all,
I tryed to install Apex Listener 2.0.3.221.10.13 into Tomcat 7.0.42 and I got the error :
INFO: Deploying web application archive C:\Program Files\Apache Software Foundation\Tomcat 7.0\webapps\apex.war
ago 16, 2013 9:15:19 AM oracle.dbtools.common.util.Files checkLegal
WARNING: File path syntax error: ILLEGAL_CHARACTER, path: C:/
ago 16, 2013 9:15:19 AM org.apache.catalina.core.StandardContext startInternal
SEVERE: Error listenerStart
ago 16, 2013 9:15:19 AM org.apache.catalina.core.StandardContext startInternal
SEVERE: Context [/apex] startup failed due to previous errors
and also
ago 16, 2013 9:15:19 AM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Exception sending context initialized event to listener instance of class oracle.dbtools.rt.web.SCListener
java.lang.IllegalArgumentException: oracle.dbtools.common.util.FilePathSyntaxException: ILLEGAL_CHARACTER
at oracle.dbtools.common.util.Files.checkLegal(Files.java:262)
at oracle.dbtools.common.util.Files.file(Files.java:127)
at oracle.dbtools.common.config.file.ConfigurationFolder.chooseExistingFile(ConfigurationFolder.java:172)
at oracle.dbtools.common.config.file.ConfigurationFolder.choose(ConfigurationFolder.java:151)
at oracle.dbtools.common.config.file.ConfigurationFolder.setup(ConfigurationFolder.java:64)
at oracle.dbtools.rt.web.SCListener.contextInitialized(SCListener.java:72)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4939)
at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5434)
at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:633)
at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:976)
at org.apache.catalina.startup.HostConfig$DeployWar.run(HostConfig.java:1653)
at java.util.concurrent.Executors$RunnableAdapter.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: oracle.dbtools.common.util.FilePathSyntaxException: ILLEGAL_CHARACTER
at oracle.dbtools.common.util.FilePathSyntax.check(FilePathSyntax.java:45)
at oracle.dbtools.common.util.Files.checkLegal(Files.java:255)
... 19 more
My platform is :
OS : Windows 7 64 bit
JRE : 1.7.0_25-b17 -
%USERPROFILE% : C:\Users\SERGIO
%TEMP% : C:\Users\SERGIO\AppData\Local\Temp
Apex Listener Configuration Folder : C:\Users\SERGIO\AppData\Local\Temp\apex
Can anyone help me, please?
Sergio

You need to configure your config directory before you deploy. If you never configured v2 listener before then create a new folder like "c:\apex\config". Then use
java -jar apex.war configdir c:\apex\config
Then do your configuration as required and then deploy again.

The Web Dynpro component cannot be generated due to serious (syntax) errors

Hi everybody,
While I was developing a web dynpro application, I had an error but I couldn't understand this error. Before I took this error message, only I changed bound one context node to another context node in a RadioButtonGroupByKey.Therefore, when I pushed activate button, I took an error message.This error message said "The Web Dynpro component cannot be generated due to serious (syntax) errors". What does it mean ? How can I find out where is the error in the application. Also, I think the reason of this error message is about a BC problem. I am waiting for your comment urgently.

Hi ,
Just delete the context (by using the context binding) and bind the field with the correct node and try to activate .
One more suggestion is that after deleting the binding and before binding to other node check it that whether that binding was properly deleted or not.Some times its not deleting the binding.
Hopely my suggestion may work.
Regards,
Satya

Program ZRFI_RFFOBR_U contains syntax errors

Hi Gurus,
While maintaing varaint for program ZRFI_RffoBR_U in App - we got the error "Program ZRFI_RFFOBR_U contains syntax errors" can anyone help us waht could be the reasons. Actually our client is doing regression testing

Hi,
It's a 'Z-program' (self-developed). If you are not familiar with ABAP, ask your ABAP team to check it.
Regards,
Eli

Error generating tuxconfig - CMDTUX_CAT:866: (Syntax Error on TUXPATH=)

Hello Tuxedo Champions,
I am trying to run a sample server and client that comes with Tuxedo installation. i.e. simpapp sample. In following the steps given by README file. In doing that, I have set and exported required paths through a shell file (that I created) pasted below:
=======================================
set TUXPATH=/home/sibusr/tuxedo11gR1/bin
export TUXPATH
set LIBPATH=/home/sibusr/tuxedo11gR1/lib
export LIBPATH
set TUXCONFIG=/home/sibusr/tuxedo11gR1/samples/atmi/simpapp/tuxconfig
export TUXCONFIG
set TUXLIBPATH=/home/sibusr/tuxedo11gR1/lib
export TUXLIBPATH
=======================================
I have then editted the ubbsimple file and it looks like:
=======================================
# (c) 2003 BEA Systems, Inc. All Rights Reserved.
#ident "@(#) samples/atmi/simpapp/ubbsimple $Revision: 1.7 $"
#Skeleton UBBCONFIG file for the TUXEDO Simple Application.
#Replace the <bracketed> items with the appropriate values.
*RESOURCES
IPCKEY 38171
#Example:
#IPCKEY 123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 10
MAXSERVERS 5
MAXSERVICES 10
MODEL SHM
LDBAL N
*MACHINES
DEFAULT:
TUXDIR="/home/sibusr/tuxedo11gR1"
TUXPATH="/home/sibusr/tuxedo11gR1/bin"
APPDIR="/home/sibusr/tuxedo11gR1/samples/atmi/simpapp"
TUXLIBPATH="/home/sibusr/tuxedo11gR1/lib"
TUXCONFIG="/home/sibusr/tuxedo11gR1/samples/atmi/simpapp/tuxconfig"
#Example:
# APPDIR="/home/me/simpapp"
# TUXCONFIG="/home/me/simpapp/tuxconfig"
# TUXDIR="/usr/tuxedo"
<Machine-name> LMID=simple
#Example:
#beatux LMID=simple
*GROUPS
GROUP1
LMID=simple GRPNO=1 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
*SERVICES
TOUPPER
=======================================
After that, tried to generate tuxconfig file using tmloadcf command ($ $TUXPATH/tmloadcf ubbsimple). But I have got the following error:
=======================================
$ $TUXPATH/tmloadcf ubbsimple
TUXPATH=
^
syntax error
CMDTUX_CAT:866: ERROR: /home/sibusr/tuxedo11gR1/bin/tmloadcf: Severe error found. Stop syntax checking.
=======================================
Would anyone please help me resolve this issue.
Thanks & Regards,
Ahsan
Edited by: Ahsan Asghar on 10-Jun-2011 04:51

Dear Champs,
I resolved the issue myself...yeyyyy!! :)
I had mentioned the following extra lines which were not required...
TUXPATH="/home/sibusr/tuxedo11gR1/bin"
TUXLIBPATH="/home/sibusr/tuxedo11gR1/lib"
Regards,
Ahsan

Adogjf Unable to generate jar files under JAVA_TOP error while patching

Hi,
I'm upgrading my version of Java from 1.3.1_19 to 1.5.0_17. I downloaded the jdk-1_5_0_17-linux-i586.bin file and unpackaged it to /u0/<SID>/<SID>db/10.2.0. It unpackaged it to a new directory jdk1.5.0_17 (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17), whereas the old version is in a directory jdk (/u0/<SID>/<SID>db/10.2.0/jdk).
Having done that I had to run an interoperability patch (4372996). Upon running this patch I received an error at the end:
adogjf() Unable to generate jar files under JAVA_TOP
There were no other errors.
I think the problem has to do with where my new java version is located but I'm not sure. I'm thinking that it's still looking under the old JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk) when I want it to look under the new JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17). So, should I move the contents from the new directory (jdk1.5.0_17) to the old directory (jdk) or is there a way to 'point' it to the new JAVA_TOP.
Please let me know if I'm totally off base and there's another solution. We're currently on EBS 11.5.10.2, DB 10.2.0.4 and RHEL 4 Update 5.
Thanks,
Lia.

Here you go. Hope this helps you to help me :-). Thanks.
+
** Generating the product JAR files...
STRT_TASK: [Generate JAR files] [] [Fri Mar 27 2009 09:20:32]
STRT_TASK: [Generate JAR files under JAVA_TOP] [] [Fri Mar 27 2009 09:20:32]
Signing product JAR files in JAVA_TOP -
/u0/mary/marycomn/java
using entity Customer and certificate 1.
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u0/mary/marycomn/java with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u0/mary/maryappl/admin/mary/out/genjars.cmd
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u0/mary/maryappl/ad/11.5.0/java/adjri.zip:/u0/mary/marycomn/util/jre/1.1.8/lib/rt.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/i18n.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/tools.jar:/u0/mary/marycomn/java/appsborg.zip:/u0/mary/marycomn/java/apps.zip:/u0/mary/maryora/8.0.6/forms60/java:/u0/mary/marycomn/java"
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
The JDK version is 1.1.8
Validating the files/directories specified for -areas option
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
About to Analyze the input areas : Fri Mar 27 2009 09:20:36
WARNING: Will not load stale resource unit META-INF/services/javax.xml.parsers
WARNING: Will not load stale resource unit META-INF/services/javax.xml.transform
Done Analyzing the input areas : Fri Mar 27 2009 09:20:43
About to Analyze/Generate jar files : Fri Mar 27 2009 09:20:43
About to Analyze fndnetcharts.jar : Fri Mar 27 2009 09:20:43
Up-to-date : fndnetcharts.jar
Done Analyzing fndnetcharts.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndtdg.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndtdg.jar
Done Analyzing fndtdg.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndjgl.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndjgl.jar
Done Analyzing fndjgl.jar : Fri Mar 27 2009 09:20:45
About to Analyze fndjle.jar : Fri Mar 27 2009 09:20:45
Up-to-date : fndjle.jar
Done Analyzing fndjle.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndlrucache.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndlrucache.jar
Done Analyzing fndlrucache.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndgantt.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndgantt.jar
Done Analyzing fndgantt.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndpromise.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndpromise.jar
Done Analyzing fndpromise.jar : Fri Mar 27 2009 09:20:48
About to Analyze fndforms.jar : Fri Mar 27 2009 09:20:48
About to Generate fndforms.jar : Fri Mar 27 2009 09:20:49
Done Generating fndforms.jar : Fri Mar 27 2009 09:20:50
About to Sign fndforms.jar : Fri Mar 27 2009 09:20:50
ERROR: Javakey subcommand exited with status 1
Javakey standard output:
Adding entry: META-INF/MANIFEST.MF
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java Key Generation
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Javakey error output:
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Successfully created javaVersionFile.
Customer not found in database.
java key error:
adjava -ms128m -mx256m sun.security.provider.Main -gs /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.tmp /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.uns
The above Java program failed with error code 1.
Done Analyzing/Generating jar files : Fri Mar 27 2009 09:20:51
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Failed to generate product JAR files in JAVA_TOP -
/u0/mary/marycomn/java.
adogjf() Unable to generate jar files under JAVA_TOP
AutoPatch error:
Failed to generate the product JAR files
You should check the file
/u0/mary/maryappl/admin/mary/log/4372996.log
for errors.
+

How to generate a file containing substructure of inboud interface

Hi Experts,
     My outbound interface structure is like below:
     <?xml version="1.0" encoding="UTF-8"?>
<ns0:File_Input xmlns:ns0="http:/training/POC">
   <NUM1>1</NUM1>
   <NUM2>2</NUM2>
</ns0:File_Input>
    My inbound interface is like below:
   <?xml version="1.0" encoding="UTF-8"?>
<ns0:File_Output xmlns:ns0="http:/training/POC">
<Filename></Filename>
<Output>
<TOTAL>3</TOTAL>
</Output>
</ns0:File_Output>
This is FILE to FILE scenario.
The input (sender or outbound) file is XML. Output file is also XML but I want it to be:
<ns0:File_Output xmlns:ns0="http:/training/POC">
<Output>
<TOTAL>3</TOTAL>
</Output>
</ns0:File_Output>
I don't want the node <Filename> in the output XML file even though the inbound interface structure contains the node <Filename>. The output file name is dynamic and hence I am using the node <Filename>. I am populating this node in message mapping.
I tried File content conversion but it is not generating the file. I gave the following conversion values.
What am I doing wrong?
File_Output.fieldSeparator = nl
Output.fieldSeparator = nl
TOTAL.fieldSeparator = nl
Please help!
Thanks
Gopal

hi Gopal,
First thing, as Spantaleoni has said, you can not avoid the quotes.
It has been clear in your case itself. That's the reason that you have nl input_20110523T104117Z.xmlnl3 in between your filename "input_20110523T104117Z.xml" and total value "3". Had you put quotes, 3 would have come in the next line itself and there would not be nl explicitly.
As for your actual issue, if it is an xml that you want at the receiver end, why are you using content conversion? As Shabarish has mentioned in his blog, dynamic configuration is always better than variable substition.
You can set the filename dynamically in a udf which is mapped to a mandatory field at the target side.
Write the below code in a udf and map it to a mandatory node at the target end , like "Output" node in your case.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String MyFileName = a + "_" + b +".xml";
conf.put(key, myFileName);
return "";
Regards,
Ninu

How to solve System.Data.OleDbException (0x80040E14): Syntax error (missing operator) in query expression..

The codes are..
Private Sub Button5_Click(sender As Object, e As EventArgs) Handles Button5.Click
        conn.ConnectionString = connstring
        If conn.State = ConnectionState.Closed Then
            conn.Open()
        Else
            MsgBox("Close")
        End If
        If (String.IsNullOrWhiteSpace(TextBox1.Text)) Then
            MessageBox.Show("PLEASE FILL IN ALL THE BOXES")
        ElseIf (String.IsNullOrWhiteSpace(TextBox2.Text)) Then
            MessageBox.Show("PLEASE FILL IN ALL THE BOXES")
        ElseIf (String.IsNullOrWhiteSpace(RichTextBox1.Text)) Then
            MessageBox.Show("PLEASE FILL IN ALL THE BOXES")
        End If
        Try
            Dim SqlQuery As String = "INSERT INTO Research (Title,Abstract,Proponents,Ryear) VALUES ('" & TextBox1.Text & "', '" & RichTextBox1.Text & "', '"
& TextBox2.Text & "', '" & DateTimePicker1.Text & "')"
            Dim SqlCommand As New OleDbCommand
            With SqlCommand
                .CommandText = SqlQuery
                .Connection = conn
                .ExecuteNonQuery()
            End With
            MsgBox("One record Succesfully Added")
        Catch ex As Exception
            MsgBox(ex.ToString)
        End Try
        Me.Close()
        main.Show()
    End Sub
The situation is, I cannot add data if it is copied from the text from the ms word and paste it to the RichTextbox in my project..I can only add if I type Manually the data the richtextbox..If I copy paste it..this error comes out.
Please help me to solve this problem..i attached the image of the error

Windows Form forums are here.
http://social.msdn.microsoft.com/Forums/windows/en-US/home?category=windowsforms
or ASP.Net forums are over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Flate file containing comma error

Hi Experts,
I have got an excel file from user which I have converted into csv. The problem is that some of the fields in the record contains ',' (comma) which is causing the load to fail. (I suppose its moving everything after comma to next field which is not right since that is part of that field too).
How can i resolve this issue.

Hi,
Just repeat the steps
Step1
Create a new infopackage>client workstation, File Is (Datafile)-Select CSV File
and Browse the CSV file
Step2
in the Dataseperator type , (uncheck HEX)
Step3
Escape Sign type ; (uncheck HEX)
Step4
Character used for Decimal point type .
Step5
Replcmt Char type #
Step6
Go for a Preview closing the CSV file
Step7
Try to alter the csv file and just inclued one record
Step8
Processing type , select one Only PSA
Let me know if you get the preview correct now ..
if soo load till PSA and check the data
and do let me know
Santosh

Why do converted pdf files contain numerous errors?

When I convert a pdf to word there are many errors in the worrd document. When I save the document to my document library it dissapears. Whats up?

Hi there,
I'm having the same problem, started only recently. Did you find a reason/solution?
I've tried Windows 7 and Windows XP, no difference. IE and FF open on page 2, but Chrome opens on page 1, as it should.
Googling around I found people having similar problems after updating to new version of AIR and Acrobat Reader, so it might be a bug/incompatibility introduced by those updates.
My best guess is that it has to do with the reading order being improperly generated by the PDF library (FPDF in my case).
Thanks for reading!
Marc

Syntax errors in examples for UTL_LMS

The examples for UTL_LMS in
Oracle® Database PL/SQL Packages and Types Reference
10g Release 2 (10.2)
Part Number B14258-01
http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_lms.htm
contain syntax errors
Correct would be
DECLARE
   s varchar2(200);
   i pls_integer;
BEGIN
   i:= utl_lms.get_message(26052, 'rdbms', 'ora', 'french', s);
   dbms_output.put_line('before format, message is: '||s);
   dbms_output.put_line('formatted message is: '||utl_lms.format_message(s, 9, 'my_column_name'));
END;
/and
DECLARE
s varchar2(200);
i pls_integer;
BEGIN
   i:=utl_lms.get_message(601, 'rdbms', 'oci', 'french', s);
   dbms_output.put_line('OCI--00601 is: '||s);
END;
/

Hello Martin,
This is a known problem with wlst-jython. One cannot catch syntax errors
programmatically. The only way is to avoid loading properties file
that may cause syntax errors.
I am curious though how can a user enter invalid properties via a script?
thanks,
-satya
Martin Gustavsson wrote:
Hi,
When there are syntax errors in WLST-script, the calling program will get no information about this.
In our case the calling program is ANT. If the user enters invalid properties it could cause syntax errors in the WLST script. But the ANT task always receive a successfull code back and doesn't know that it went wrong.
What is the workaround for this? How can I from WLST return a fail code so that ANT does not continue?
Regards,
Martin

File Not Found Error on Fresh MX7 Installation

After spending days getting CFMX 7.0.2 installed on a CentOS5.3 (production) server running Apache 2.2.3 and WHM/cPanel 11, by religiously following Bill Mitchell's lifesaving guide, CF is up and running but I cannot access the administrator or anything else in user public_html directories.
If I place a simple foo bar test file in the /usr/local/apache/htdocs/testfile.cfm directory, I can call it at http://[IPaddress]/testfile.cfm and it parses properly.
However, if I place the same file at /home/cfusion/public_html/testfile.cfm and call it at http://[IPaddress]/~cfusion/testfile.cfm, I get a CF-generated 404 "File Not Found" error.
cfusion is a cPanel account I created via WHM prior to installing ColdFusion as a repository for my CFIDE directory.
If I place a symlink for /usr/local/apache/htdocs/CFIDE -> /home/cfusion/public_html/CFIDE:"File Not Found". If I cp -R my CFIDE into htdocs: "File Not Found." These files are physically there. I can easily verify that of course. But CF is still saying File Not Found. In fact, if I disconnect Apache - JRun, Apache finds the files all by itself no problem. They are definitely there.
I thought this might be a permissions issue, but all my .cfm files are nobody:root 775.
Here's what I'm seeing in the exception.log:
coldfusion.runtime.TemplateNotFoundException: File not found: /~cfusion/filetest.cfm
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:83)
    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
    at coldfusion.CfmServlet.service(CfmServlet.java:107)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I guess maybe I need to know where the config for webroots is set from the CF/JRun perspective? I'm a decent hand with web server admin stuff, but despite being a CF dev for 10 years, CF admin stuff is still a bit over my head. Any help would be GREATLY appreciated. I'm at my wit's end!

Thanks Mack. I set verbose to true in my httpd.conf, restarted Apache, restarted CF, but I can't see any difference in the logging. Errors seem the same, and no additional info.
The Apache error_log file is filled with cryptic stuff that looks like it's referencing JRun. Does any of this mean anything to you? Is there another log file I should be looking at?
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filterRequest:   no match
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: r is 0x9d1aa98, server is 0x99df290, virtual 1
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: no handler, return DECLINED
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] jrun_trans: r is 0x9d169d8, server is 0x99df290, virtual 1
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910]     HOST: <null>
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474]     HOST: <null>
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: no handler, return DECLINED
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] jrun_trans: r is 0x9f96cc8, server is 0x99df290, virtual 1
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314]     HOST: <null>
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filterRequest:   no match

AS 2.0 syntax errors

The fla in the link contains syntax errors.
any help?
rd
DOWNLOAD FLA
HERE

The fla is real, I would never post a link to something other
than what I say. I have respect for the forum and the best way to
fix would be for someone to see the fla. Below are the errors
fixed all but this below.
*Error** Symbol=menu back, layer=view documentary, frame=1,
Line 1: Mouse events are permitted only for button instances
on (release){
I dont understand, it is a button instance!
*

How to generate .xsd file using jaxb generated java files

Hi,
We need to upgrade our applicatio to jdk1.6 which has jaxb2.0 class files in it. Our application has java files generated from .xsd using jaxb1.0.2 version. At present we dont have .xsd or .xml file with us.
We decide to generate .xsd file by using jaxb1.0.2 generated java files. I tried using schemagen.exe given by jdk1.6 to generate .xsd file. It error out. Is there any other way to generate .xsd file ?
pls let me know.
thanks,
Thiru

Object-XML mapping is a new feature in JAXB 2.0. Classes generated with JAXB 1.0 won't generate a schema.
Generate Java classes with JAXB 2.0 xjc.
http://www.theregister.co.uk/2006/09/22/jaxb2_guide/

[SOLVED] Generated grub file contains syntax error

Similar Messages

Maybe you are looking for