[SOLVED] Issues with ALSA, alsaequal, and dmix

In chronological order:
1. ALSA works
2. Alsaequal is working systemwide
3. I can't play audio from multiple sources at the same time, basically dmix is not working.
4. Get dmix working, but then alsaequal stops working.
So how do I get dmix and alsaequal to work at the same time?
Here is my .asoundrc. Note it was obtained from http://wiki.debian.org/InstallingDebian … ireOne_722
pcm.!default {
type plug
slave.pcm "dmixer"
pcm.dmixer {
type dmix
ipc_key 1024
slave {
pcm "hw:1,0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
bindings {
0 0
1 1
ctl.dmixer {
type hw
card 0
Here is my /etc/asound.conf
ctl.equal {
type equal;
pcm.plugequal {
type equal;
# Modify the line below if you do not
# want to use sound card 0.
slave.pcm "plughw:1,0";
#by default we want to play from more sources at time:
#slave.pcm "plug:dmix";
#pcm.equal {
# Or if you want the equalizer to be your
# default soundcard comment the following
# line and uncomment the above line.
pcm.!default {
type plug;
slave.pcm plugequal;
defaults.pcm.rate_converter "samplerate_best"
I tried combining the two files and dmix would still work but then alsaequal would have no impact on the audio playing.
Any help would be greatly appreciated. Thanks!
Last edited by insecticider (2011-09-10 20:12:10)

Thanks to this thread, it's been solved.
https://bbs.archlinux.org/viewtopic.php?id=97653

Similar Messages

Issue with ALSA softvol and reloading sound card module

I'm using a Chaintech AV710 card with the snd_ice1724 module as a driver. The core issue is that sometimes when this module is loaded during startup (or every time after a suspend), it will play nothing but very loud static. To fix this, I simply reload the module. This fix worked fine for me while I used pulseaudio: I would just kill pulse, reload the module, and start pulse after every suspend. Now, however, I'm using a system that involves an ALSA softvol plugin. The softvol device is being used by JACK: jackd -d alsa -d softvol. When I reload the module using this setup, the softvol control I set up becomes locked at 100%. amixer reports "Invalid command!" for sset Master2 10%. The audio will still play, but I can't figure out any way to reset it to make this control work again short of renaming the control, restarting jack, renaming the control back to the original name, then restarting jack again. Any help alleviating this issue on any of these fronts would be appreciated. Relevant asound.conf sections:
pcm.mycard {
type hw
card AV710
device 1
rate 44100
channels 2
format S32_LE
pcm.softvol {
type softvol
slave.pcm "mycard"
control {
name "Master2"
card AV710
ctl.softvol {
type hw
card AV710
Last edited by XionZui (2013-06-11 16:33:25)

stlarch wrote:Hi, did you install alsa-utils and add alsa to your daemons array in /etc/rc.conf? Also, you need to add yourself to the audio group, #gpasswd -a yourusername audio. The wiki has an article on alsa that should help, or check the beginners guide.
Yes, of course, alsa-utils is installed (so is alsa-firmware, and alsa-oss). I'm in audio group.
ewaller wrote:can you post the output of
cat /proc/asound/cards
Also, you should have a directory /proc/asound/card0/ Which should have one or more files with names of the form codec#n, where n is a sequential integer starting with 0. If those files are not hellaciously long, post them here (With code tags). Otherwise, could you pastebin them and provide a link?
Edit: fixed typo
~ $ cat /proc/asound/cards
--- no soundcards ---
The directory /proc/asound/card0 doesn't exist :
~ $ lsi /proc/asound/
total 0
-r--r--r-- 1 root root 0 Mar 5 12:38 cards
-r--r--r-- 1 root root 0 Mar 5 12:38 devices
-r--r--r-- 1 root root 0 Mar 5 12:38 hwdep
-r--r--r-- 1 root root 0 Mar 5 12:38 modules
dr-xr-xr-x 2 root root 0 Mar 5 12:38 oss/
-r--r--r-- 1 root root 0 Mar 5 12:38 pcm
dr-xr-xr-x 2 root root 0 Mar 5 12:38 seq/
-r--r--r-- 1 root root 0 Mar 5 12:38 timers
-r--r--r-- 1 root root 0 Mar 5 12:38 version
Thanks for helping !

How I solved issues with Mail.app and Spotlight

Even though my upgrade from Tiger 10.4.10 to Leopard was painless, the new OS X did have a few issues that had bothered me:
*Mail.app: * Every now and then, the app would behave like on its first startup, saying it needs to import my mail before I can work with it. What's more, at times I've had the phenomen that messages would appear empty on the preview pane and sometimes even when being opened.
*Spotlight: * Even though I let the indexing finish on the first day of working under Leopard, every now and then it seemed to start all over. First, I thought it's the NAS being indexed but it just went on to restart indexing each time I thought I had let it finish.
*Free disk space: * I tried to bring the usage of my homedirectory down so I would have enough free disk space to switch FileVault off and then back on so I could start using TimeMachine. But whatever I did, the free disk space just wouuldn't inrease - it just stayed the same (yes, I did let the system recover space on shutdown).
The *free disk space* issue made me think there was a problem with my disk but repeated runs with the Disk Utility yielded nothing...not for about a month. Yesterday I got some warnings about 'damaged but not repaired' but according to an Apple doc those could be safely ignored.
Somebody suggested to apply the combo update for 10.5.1 as that could solve some issues so I went ahead - after all, the update had already been applied earlier so just re-installing wouldn't hurt much, right?
Wrong.
The install of the combo update went smoothly, FileVault recovered some space on shutdown but upon restart I couldn't log in anymore: My homedirectory was damaged. The friendly OS X Leopard offered to repair it but soon later reported back that it failed doing so.
Now, to cut a long story short - deleting the affected user's account and using a different user on the same machine (without FileVault) solved any issues I've had. Mail now works like a charm (despite 40k+ messages with attachments), spotlight doesn't restart all it's indexing and disk space is shown correctly again. Also the odd corrupt file copy I had experienced occasionally (especially with large files) was gone.
My advise to anyone who didn't de-activate FileVault under Tiger to make the switch to Leopard: Even if you think it worked, switch it off and let Leopard set it up again. You may think things went right...but the above shows that there may be issues with it that you may blame other apps for...but they're probably not guilty at all.
I don't think the combo update actually caused FileVault to turn corrupt, it was just what broke the camel's neck. While it's no fun to lose your homedirectory, I'm glad the underlying issue finally came to light.

Thanks to this thread, it's been solved.
https://bbs.archlinux.org/viewtopic.php?id=97653

Is there a Yosemite fix on the horizon? Lots of issues with Adobe CC and even Mac Apps

What is Apple doing about Yosemite issues with Adobe, MSoft and its own apps?

We are Apple, so we don't know.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Hi, I have an issue with Photoshop CC and Lightroom

Hi, I have an issue with Photoshop CC and Lightroom. I purchased a subscription the other day, they told me to install the CC app to install these. I installed the app, logged on and it still says trial version. How can I solve this? Could I be that the subscription is not activated yet?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

[SOLVED] Issues with ALSA, alsaequal, and dmix

Similar Messages

Maybe you are looking for