[solved] journalctl --user: No journal files were found.

Hello there,
I am wondering ~ $ journalctl --user
No journal files were found.
~ $ l /var/log/
total 6804
-rw-r--r-- 1 root root -rw-r--r-- 1 root root drwxr-xr-x 2 root root drwxr-xr-x 2 root root drwxr-xr-x 2 root root drwxr-xr-x 2 root root drwx--x--x 2 root lrwxrwxrwx 1 root root -rw-r--r-- 1 root root drwxr-sr-x 3 root systemd-journal -rw-r--r-- 1 root users drwxr-xr-x 2 root root -rw------- 1 root utmp -rw------- 1 root root -rw-r--r-- 1 root root -rw-r--r-- 1 root users -rw-rw-r-- 1 root utmp -rw-r--r-- 1 root root -rw-r--r-- 1 root users -rw-r--r-- 1 root root -rw-r--r-- 1 root users ~ $ l /var/log/journal/
total 0
drwxr-sr-x 2 Last edited why I do not have any user logs:
22986 2012-12-15 16:13:00.878281725 +0100 ntp.log
24876 2013-03-07 18:54:50.270467876 +0100 pm-suspend.log
40 2013-03-09 02:43:10.000000000 +0100 speech-dispatcher
40 2013-03-14 20:20:00.000000000 +0100 old
60 2013-03-16 18:51:18.233896409 +0100 wicd
40 2013-05-24 10:02:01.000000000 +0200 samba
120 380 2013-06-22 22:42:45.872104570 +0200 gdm
25 2013-09-14 12:28:02.000000000 +0200 teamviewer -> /opt/teamviewer8/logfiles
1890164 2013-10-16 14:39:08.805786162 +0200 pm-powersave.log
60 2013-11-05 07:21:37.325876069 +0100 journal
31757 2013-11-05 15:25:25.739789167 +0100 Xorg.1.log.old
300 2013-11-11 08:16:06.761175528 +0100 timeshift
16896 2013-11-13 19:08:56.986485142 +0100 btmp
32064 2013-11-14 07:12:55.729704033 +0100 faillog
292584 2013-11-14 07:12:56.423060590 +0100 lastlog
32772 2013-11-14 08:33:29.499907754 +0100 Xorg.1.log
3049728 2013-11-15 09:23:09.970659173 +0100 wtmp
0 2013-11-15 09:23:30.054163627 +0100 .flagged
30763 2013-11-15 09:26:33.603319848 +0100 Xorg.0.log.old
1471385 2013-11-15 12:50:26.556117528 +0100 pacman.log
42965 2013-11-15 16:11:04.330121845 +0100 Xorg.0.log
root systemd-journal 1200 2013-11-15 09:23:10.113991730 +0100 e8b37a474b614e438a0ab6a142101c2c
by orschiro (2013-11-20 07:46:45)

I cannot provide an explanation why but deleting /var/log/journal/ and re-creating the directory resolved the issue:
~ $ journalctl --user
-- Logs begin at Wed 2013-11-20 07:05:57 CET, end at Wed 2013-11-20 07:06:15 CET. --
Nov 20 07:05:57 thinkpad systemd[506]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Nov 20 07:05:57 thinkpad systemd[506]: Mounted /sys/kernel/config.
Nov 20 07:05:57 thinkpad systemd[506]: Stopped target Sound Card.
Nov 20 07:05:57 thinkpad systemd[506]: Starting Default.
Nov 20 07:05:57 thinkpad systemd[506]: Reached target Default.
Nov 20 07:05:57 thinkpad systemd[506]: Startup finished in 248ms.
Nov 20 07:06:15 thinkpad systemd[506]: Time has been changed

Similar Messages

Import AOL Communicator mail failed. Error: no valid mbox files were found

I´m having problems to import (archived) AOL Communicator mail messages into Mac Mail. After choosing File > Mailboxes > Import data from "Other" and then selecting the the folders "LIbrary" > "Application Support" > "AOL Communicator" > "local" > "Archives.sbd", I always get the error message: no valid mbox files were found.
(Actually the Received and Sent files in the Archives.sbd subfolders are NOT highlighted, even though the Archives.sbd and it´s subfolders (like myaolmail.sbd) are.)
Mac Mini Mac OS X (10.4.5) AOL Communicator for Mac
Mac Mini Mac OS X (10.4.5)

Hi,
I am in the same situation (just posted myself!), and am trying this out right now:
http://www.apple.com/downloads/macosx/internet_utilities/aolserviceassistant.htm l
Maybe it will work for you?
Good luck,
Allyosn

Found several folders empty. The files were found in the trash. All files are MS products. Is this a virus of some sort?

I recently found several of my folders were emtpy. Out of desperation I looked in the Trash, and found that all my files are somewhat systematically being moved to the trash. All the files are MS (I use Office for Mac), including Adobe. Has anyone experienced this? What's the "fix"?

I found another thread discussing a problem similar to yours:
https://discussions.apple.com/message/22613149#22613149 ("Files in my trash bin which I didn't put")
One of the people who responded, thomas_r., is a virus expert and has an excellent website -- thesafemac.com -- all about Macs and viruses. He did not think a virus would cause this.
So I'd definitely recommend making a backup (or preferably two, since hard drives eventually fail), and you could upgrade to Mavericks (especially since Snow Leopard appears to be no longer supported by Apple) -- but based on Thomas's reply, I don't think a virus is causing this.

No source metadata files were found

I get this message when attempting

oops...
I get this message when attempting to use the capture wizard to load offline metadata files generated by IDS9_DSML_SCRIPT.sh for Informix. I tried to change to the sysmaster folder, the <database_name> folder, and the parent folder, but the result is the same: doesn't see the .dat files. I even copied the files to my PC and ran the capture wizard from my local instance of OMWB.
Thanks in advance,
Armand

[SOLVED]Archck boot Error 15: File not found

Pacman -Sy after enabling community
pacman -S kernel26archck
everything looked to have gone properly
edited /boot/grub/menu.lst
# (0) Arch Linux
title Arch Linux
root (hd0,5)
kernel /vmlinuz26 root=/dev/hda8 ro vga=792
initrd /initrd26.img
# (1) Arch CK
title Arch CK
root (hd0,5)
kernel /vmlinuz26archck root=/dev/hda8 video=vsafb:ywrap,mtrr,1024x768-32@60 splash=silent,theme:darch quiet console=tty1 ro
initrd /boot/initramfs-2.6.15-archck.img
savedefault
boot
# (2) Windows
title Windows XP
root (hd0,0)
makeactive
chainloader +1
can boot into original kernel but recieve the error trying to boot into archck

Alethos wrote:
initrd /initrd26.img
initrd /boot/initramfs-2.6.15-archck.img
find the difference .

Error:"Add on executable file not found"

hi
How to solve
"Error:"Add on executable file not found"" while adding add ons in sap b1
Edited by: Philip Eller on Jun 16, 2008 10:13 AM
Edited by: Philip Eller on Jun 30, 2008 10:02 AM*

Hello Neetu,
Are you installing the XLR? if yes, when choose SQL server, please
Type a wrong servername first, then you will be able to get to an advanced
dialogue. Enter the correct name with username and password and then go on
to see if it works.
Kind Regards,
Maggie Zheng
SAP Business One Forum Team

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?

With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
Thanks
Roz

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

User tables belonging to the dbo schema were found in the database...

Hi
I´m running SAP on windows server 2003 R2 x64 sql 2005.
I have installed a sandbox system based on NW 7.01 SR1 ECC 6.0. It´s only abap.
After that I wanted to make a system copy of our production system to the the sandbox. So my sql colleague took a full backup of the production database and restored it into the sandbox.
Now I´m trying to run the system copy installation sapinst - SAP ERP 6.0 EHP4 Ready (Support Release 1) - Sotware life Cycle Options - System Copy - MS SQL Server - Target System Installation - Central System - Based on AS ABAP - Central System...
I choose custom and say it´s a Homogeneus System Copy (MS SQL Servver-specific)
After that I choose "Use existing database" but the it say:
*User tables belonging to the dbo schema were found in the database ES0. SOLUTION: You can only install an SAP system in a database with no user objects belonging to the system schema dbo. If there already is an SAP system in the database (MCOD), or you install a Java Add-In, you might have to convert the existing system to its own schema, or contact your SAP support.*
I have searched the forums and can´t find anything I can use. I found someone wrote that I should change the control.xml file under sapinst directory:
Proceed as follows:
1. Stop SAPinst.
2. Open the file control.xml in the sapinst log directory and look for the following lines:
AllowNew: mig ? ?false? : ?true?,
AllowDboObjects: mig ? ?true? : ?false?,
3. Change these lines to
AllowNew: ins ? ?true? : ?false?,
AllowDboObjects: ins ? ?false? : ?true?,
4. Save the control.xml, restart SAPinst and choose ?Continue old installation?.
but it is not helping.
Please advise me.
If this is the wrong forum please tell which one is correct.
Best regards
Thomas
Edited by: Thomas Aastrøm on Feb 23, 2012 3:49 PM

Hi again
Phase 11 is ok now. We changed the database owner to sap SIDadm.
But now it fails at phase 12 (Move MS SQL Server objects from one schema to another)
An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/.
sapinst.log:
INFO 2012-02-24 13:18:55.427
Execute step MoveSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0
ERROR 2012-02-24 13:18:56.349
FCO-00011 The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
ERROR 2012-02-24 13:18:56.146
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]Object 'ep0.AFKO' does not exist or is not a valid object for this operation.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
INFO 2012-02-24 13:19:02.583
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema".
ERROR 2012-02-24 13:19:02.770
FCO-00011 The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
What to do?
Best Regards
Thomas

[SOLVED]File journal: what's the recomended journal file size??

After checking the journaling file
journalctl --disk-usage
Journals take up 679.5M on disk
I have found that i have 680M of journal files, it's a good idea to limit these files to a smaller amount???
I'm using an 120GB ssd. I was thinking limit those to 50M.
English is not my native language; please excuse typing errors.
Last edited by m1st3rkr3p (2014-02-22 15:17:53)

Found a solution for the journaling. Thanks for the tip.
Edit:found a solution.
Last edited by m1st3rkr3p (2014-02-22 15:17:02)

Import iTunes Media Library, some files were not found problem

Hi guys,
I am trying to restore my music library info via importing from iTunes Media Library xml file I backed up. During import, iTunes gave me error message box saying that some files were not found and therefore won't get imported. After it's done, I checked the iTune and I noticed many of the music files did not get imported at all, even their locations are correct. Is it because iTunes stopped importing at the first entry that it found its location not existed and therefore skipped the rest all along? Even later ones might be valid. Is this the case?
Is there an easy way to find out what those entries are? So perhaps I could go and edit them directly in the xml file. The message box did not give much information
Any help would be really appreciated,
Thanks alot
Windows XP Pro
Windows XP Pro

Hi Chris
I have now experimented a little more and discovered that although Time Capsule (TC) is showing in Finder as a Shared Drive at laptop startup (and showing a status of a connected user, me) it is not actually 'mounted' in the true sense of the word i.e. the unmount/eject symbol is not showing next to it nor either of the drives connected to the TC. By clicking on either of the 2 drives (i.e. the TC 'Data' disk or the TC USB-connected drive) the status changes to show the dismount symbol on both the selected drive and the TC in the Finder side bar. Launching iTunes after this intervention works every time as per your advice. Not the Apple 'it just works' that I have come to expect and appreciate but at least I now understand how to make it work reliably..........many thanks and I hope Apple just makes it work sometine in the future

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

How do I import playlists from my old computer to my new computer. I followed the instructions to export the playlists, but when I tried to import on the new computer the files were nowhere to be found?

I saved my playlists on my new computer as per the instructions in iTunes help. Then I tried to import the playlists on my new computer but the files were nowhere to be found. Found the correct directory, but not there. my computers are connected on a network, so I don't know what I am doing wrong? Anyone have any ideas?
Thanks,
Paul Constantine

Copy the entire iTunes folder from the old computer to the new one.
tt2

How to correct "No timestamps were found on any of the image files" in Bridge CS4?

I am trying to process a "Auto-stack Panorama/HDR" images and I keep getting the error message "No timestamps were found on any of the image files". I don't understand what this means and how to correct the issue so I can process my images. All of the images are .CR2 raw files, which Bridge shouldn't have issues with.
Can anyone help with correcting the issue of the timestamps?
Thank you.
BP

Does this give you any clues on HDR? http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CDwQFjAB&url=http%3A%2 F%2Fhelp.adobe.com%2Fen_US%2FBridge%2F3.0%2FWS3B0804D4-9DB7-441d-983D-0F863872F6E6.html&ei =Lfz5TtT-H6LkiAKIrLnIDg&usg=AFQjCNHFhS6ND2dG24gADWxEeOMdWacd4A

[solved] journalctl --user: No journal files were found.

Similar Messages

Maybe you are looking for