User tables belonging to the dbo schema were found in the database...

Hi
I´m running SAP on windows server 2003 R2 x64 sql 2005.
I have installed a sandbox system based on NW 7.01 SR1 ECC 6.0. It´s only abap.
After that I wanted to make a system copy of our production system to the the sandbox. So my sql colleague took a full backup of the production database and restored it into the sandbox.
Now I´m trying to run the system copy installation sapinst - SAP ERP 6.0 EHP4 Ready (Support Release 1) - Sotware life Cycle Options - System Copy - MS SQL Server - Target System Installation - Central System - Based on AS ABAP - Central System...
I choose custom and say it´s a Homogeneus System Copy (MS SQL Servver-specific)
After that I choose "Use existing database" but the it say:
*User tables belonging to the dbo schema were found in the database ES0. SOLUTION: You can only install an SAP system in a database with no user objects belonging to the system schema dbo. If there already is an SAP system in the database (MCOD), or you install a Java Add-In, you might have to convert the existing system to its own schema, or contact your SAP support.*
I have searched the forums and can´t find anything I can use. I found someone wrote that I should change the control.xml file under sapinst directory:
Proceed as follows:
1. Stop SAPinst.
2. Open the file control.xml in the sapinst log directory and look for the following lines:
AllowNew: mig ? ?false? : ?true?,
AllowDboObjects: mig ? ?true? : ?false?,
3. Change these lines to
AllowNew: ins ? ?true? : ?false?,
AllowDboObjects: ins ? ?false? : ?true?,
4. Save the control.xml, restart SAPinst and choose ?Continue old installation?.
but it is not helping.
Please advise me.
If this is the wrong forum please tell which one is correct.
Best regards
Thomas
Edited by: Thomas Aastrøm on Feb 23, 2012 3:49 PM

Hi again
Phase 11 is ok now. We changed the database owner to sap SIDadm.
But now it fails at phase 12 (Move MS SQL Server objects from one schema to another)
An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/.
sapinst.log:
INFO 2012-02-24 13:18:55.427
Execute step MoveSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0
ERROR 2012-02-24 13:18:56.349
FCO-00011  The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
ERROR 2012-02-24 13:18:56.146
MDB-05053  Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]Object 'ep0.AFKO' does not exist or is not a valid object for this operation.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
INFO 2012-02-24 13:19:02.583
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema".
ERROR 2012-02-24 13:19:02.770
FCO-00011  The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
What to do?
Best Regards
Thomas

Similar Messages

  • CS4: Unable to install any CS4 product. error:"critical errors were found in the setup"

    I am trying to install adobe photoshop and dreamweaver CS4 on my windows xp. But both of them during the loading of setup file returns the following error:
    "Crtical errors were found in the setup. check the setup log file for details."
    I checked the log file and found the following lines relevant to the error:
    C:\Program Files\Common Files\Adobe\Installers\acce07fd2c8fe7f9e3f26243e626578\resources\scripts\
    Property(S): sessionID = acce07fd2c8fe7f9e3f26243e626578
    Property(S): ProductVersion = 2.0
    Property(S): Manufacturer = Adobe Systems Incorporated
    Property(S): ProductLanguage = 0
    Property(S): ProductCode = {14AFE241-FC6E-4FDB-BCA0-7AD6F4974171}
    Property(S): installLanguage = undefined
    Property(S): LanguageIndependent = 1
    Property(S): ALLUSERS = 1
    Property(S): overrideFile = 0
    Property(S): ARPSYSTEMCOMPONENT = 1
    Property(S): REBOOT = ReallySuppress
    Property(S): ExitWorkflow = 0
    Property(S): AddRemoveInfoDriverAdobeCode = {07CD1281-D5ED-4BB4-8964-7B4F1F36315D}
    Property(S): AddRemoveInfoDisplayName = Adobe Dreamweaver CS4
    Property(S): AddRemoveInfoDisplayVersion = 10.0
    Property(S): AddRemoveInfoPublisher = Adobe Systems Incorporated
    and after few more lines........
    Critical errors were found in setup
    TypeError:'undefined' is null or not an object
    Please see the Setup log file for details.
    I don't what's the problem. many people have this problem but they had not found the relevant thing in the log file. With this information provided please tell me what to do????

    Download the clean u script for CS 4 fro the Adobe site you have to search for it.
    Then try this, create a new user account and log in to this account and the try to install from there.
    Since this ihe Mac forum I assume yu are on a Mac so if that fdoes not work try a safe boot and then install.
    A Safe Boot is rebooting while holding down the shift key until you see the safe boot welcome screen.
    then try to install.
    Oops this is the illustrator forum cross platform sorry I do not know how to safe boot on the PC.

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • When I updated the software on my ipod 4 touch, many podcasts were erased. When I synced the ipod, they were erased from the ipod also. The current itunes does not allow me to go back to these dates (a few months) and re-download? Can I? and prevent this?

    When I upgraded the software on my ipod touch4, many podcasts were deleted from itunes. Of course, when I synced the ipod, they were deleted from the ipod as well. Apparently the current version of itunes will not let me go back to these earlier episodes (just a few months), in a podcast that I have been subscribed to, and re-download them. Is there a way to do that? and, how can I prevent this from happening again?

    Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

  • Idvd5.01 Errors were found during the burning process (Burned Finished)

    I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

    Hello, Oscar,
    This message can mean several things.
    First, are you burning an iMovie or a slideshow or both?
    Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
    Does everything encode properly?
    Are you able to 'save as disk image'?
    Post back with some more details about your project.

  • Errors were found during the burning process!?!?

    I finished importing a movie off of my DV Camera and clicked "share" in the iDVD '06 menu. I selected iDVD and my movie was sent into iDVD 6. After customizing a menu, and inserting a blank disc, the burning process was started. After iDVD6 has finished "processing" and "rendering" the menus and the movie, the progress bar for the action "burning your DVD" pops up. About a quarter of the way through I get a window which says the following:
    Burning Finished
    Errors were found during the burning process.
    After clicking "Details" it says:
    The recording device reported the media error: Write error. (0x0C, 0x00.)
    I have tried burning a movie on all DVD types available.(DVD-R DVD+R DVD RW) Why does this problem keep occurring? Is there a problem with my superdrive?

    Hello Ilzmaster,
    the cause could be your burner, but it's much more likely that high burn speed is the culprit - and you can't control that in iDVD.
    Try creating a disk image (File > Save as Disk image). This creates an .img file on your HDD, that can be stored for future use and gives you the option to preview your DVD on your Mac before burning to disc.
    Next use Disc Utility or Toast to burn your DVD at slow speed. 4x is acceptable, 2x (... or even 1x) is better.
    Use only high quality DVD-R (not DVD+R) media (e.g. Verbatim) to minimize burn errors and compatibility issues. Make sure the DVD is compatible with slow burn speed (e.g. 1x-4x)
    Also: iDVD likes to have the project(s) on your startup disc with 15 - 20 GB of available disc space
    hope this helps
    mish

  • "Developer Error. The following errors were found in your file:

    I reinstalled my OS and I am trying to install ?LabVIEW properly for the past two days and whenever I run the setup I am getting this error
    ""Developer Error. The following errors were found in your file:
    1. Specified file not found: [Utilities] UpgradeManagerPostProcessor = Bin\niPie.exe
    Correct the ini file and try again.""
    Mathan Suggested me this thread .
    In that thread Brain.T had given a zip file i put it in my bin folder and I am now able to install LabVIEW.But I am not able to install device drivers,vision,vision assistant.Help Please

    So you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.

  • What does problems were found with the partition map mean

    Why is there a problem when I run my disk utility that says "problems were found with the partition map that which might prevent booting"?  Why is there a problem????????

    You have to repair your partition map. It's the most important part of the hard drive related to software, because if the partition map doesn't work, the whole hard drive is useless.
    As you have OS X Lion, you should be able to repair it while OS X is started. Open Disk Utility (in /Applications/Utilities), choose your hard drive at the top of the sidebar, and press the button to repair the disk. What do you see in the blank box?
    Also, after choosing the hard drive in Disk Utility, tell me the SMART status, at the bottom of the window. You may also want to check the Macintosh HD status

  • HT201365 Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How N

    Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How Now?

    and
    Because my first response would be....Oh, sure.....
    Because I am sorry you are having a hassle with the intenet. There is nothing more frustruating than having to deal with a slow response, or a makeshift connection....hope it gets fixed soon!!!
    Your friend,
    GB

  • My Apple TV 2 is slow when trying to move through different menu selections. It is like a slow computer trying to catch up to mouse clicks. It eventually remembers the buttons that were pushed on the remote, but it freezes and takes a minute to catch up.

    My Apple TV 2 is slow when trying to move through different menu selections. It is like a slow computer trying to catch up to mouse clicks. It eventually remembers the buttons that were pushed on the remote, but it freezes and takes a minute to catch up.

    I had something similar a couple of week ago, it would scroll then stop, scroll then stop.
    At some point the porblem went away.
    Try unpowering and restarting your AppleTV.  Rsetart iTunes too.

  • Notification print Error message :- No entries were found in the Cataloge T

    HI All ,
    when  printing  the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also  , but when i am going to Pint the notification i am getting the error message like  no entries were found in the cataloge T.
    Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
    Regards
    piyush

    resolved throgh debugging , the short text & long text is not maintain for the Catalouge.

  • Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only, I had to reinstal Win after updating, because the new  QT  kept the reg with no pro func

    Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only. I uninstalled the new QT version, and reinstalled the old QT 7 but the Pro functions were still unavailable, so , I had to reinstal Windows to get my Pro functions back. This happened quite a while ago, but every time I get the "Update" message, I am afraid to launch it.

    All I can say is that the problem you experienced is not by design but was instead some sort of technical fault, either in QuickTime or in Windows. I've upgraded QuickTime for Windows a number of times, to various new versions of QuickTime 7, and it's never removed my Pro key. My guess, and this is strictly a guess, is that something corrupted the preference file where the Pro key is held, disabling the Pro features and not allowing you to re-enter your key. Since you reinstalled Windows, I would expect that future updates to QuickTime will go without problem, and if for some reason the Pro features are ever removed, re-entering your Pro key should get them back.
    Regards.

  • I forgot my iCloud password  also the questions that were associated with the account please is there anyway to resolve this

    i forgot my iCloud password and the questions that were associated with the account is there any way to resolve this

    No one here can help you.
    Contact Apple.

  • Hello  J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?  138 photos not having been imported were found in the iPhoto library(bookcase).  Would you care for import them? Yes or no you already have meet this

    onjour
    j ai des probleme au demarage d iphoto le dialogue s affiche et  me demande le  texte suivant ?
    138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
    Souhaitez-vous les importer ? oui  ou non avez vous deja rencontrer ce proble  si oui pouvez vous m aider
    Merci
    Hello
    J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
    138 photos not having been imported were found in the iPhoto library(bookcase).
    Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
    Thank you

    Open your iPhoto Library package with the Finder as shown in this screenshot
    and look in the folder named Auto Import.  Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes.  Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
    OT

  • Found all the Servers that were restart without the maintenance mode were actived ?

    Hi all
    I was wondering if I can find a query about this request:
    - Found all the Servers that were restart without the maintenance mode were actived ?
    It's to make a Report To include in Reporting Services.
    sorry for my English :)
    Thank you very much and have a good day

    Hi, first if the maintenance mode is activated no events are collected, then, as example, in default rules you can see the following
    Collection Rule for Windows Restarted Events that collects eventid=6005
    with eventsourcename=eventlog from System
    log which is enabled by default.
    http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=6005&EvtSrc=EventLog&LCID=1033
    So you can check Data warehouse DB for presence such event
    select ComputerName, DateTime from Event.vEvent ev
    inner join Event.vEventDetail evd on ev.eventoriginid = evd.eventoriginid
    inner join Event.vEventParameter evp on ev.eventoriginid = evp.eventoriginid
    inner join vEventLoggingComputer elc on elc.eventloggingcomputerrowid = ev.loggingcomputerrowid
    where eventdisplaynumber = '6005' Order by ComputerName, Datetime
    http://blogs.technet.com/b/kevinholman/archive/2007/10/18/useful-operations-manager-2007-sql-queries.aspx
    So if you see this event it means the server was restarted and the maintenance mode was not activated.
    Also keep in mind that there can be other event ids when computer is restarted, as example see the rule
    Collection Rule for Windows Restart Events (restarted from bugcheck)

Maybe you are looking for

  • Tablespace Name in 11.5.10.2

    Hi group, We are working on an environment with 11.5.10.2 Ebusiness Suite application version and 10.2.0.3 database version where there are more than 600 tablespaces with Segment Space Management "Manual". Now, I want to rellocate large segments to a

  • How do I open a win mail-20.dat file

    I have been receiving my payslips with an attachment win mail-20.dat for months and have been unable to open the file. Please can you help me it is so frustrating.

  • Client or module information in oracle database in citrix environment

    We have oracle 10g database in citrix environment . We are enable to get client information when he is logon in oracle database or application through citrix. How can we get client information in oracle. we want to stop sqlplus or any other tools exc

  • Pre order $10 Certificat​e & GCU

    Hi, I pre ordered battlefield hardline for the xbox one by depositing $5 the day before the release date. I came back to pick it up the next day and paid I believe a total of $50. I'm not exactly sure if the $5 deposit was applied or not but I don't

  • N79 - Where is the delete key?

    I just bought the N79 phone and realised there is no "Delete" key. In all my previous phones one key was always designated as the "delete" key. Help!!