[SOLVED} no write access to qnap

Hello all,
built a new system, installed Arch64, had Arch32 on previous build.
I set up my /etc/fstab file per my last post:
https://bbs.archlinux.org/viewtopic.php?id=114716
however, I can't seem to copy any files to my qnap device.
when I issue a chown, the cursor goes away for a couple seconds and then returns, however, the properties of the directory are still root.
How can I regain "write" access to the qnap?
--nixIT
Last edited by nixIT (2011-05-12 03:04:23)

another reboot and it work. uggg, late night, I'm outa here.
--nixIT

Similar Messages

Libusb requires write access to USB device nodes [SOLVED]

Hi,
I have used gtkam to upload photos from my camera for some time now - though on an occasional basis because I don't take very many photographs. On attempting to use it today for the first time in a while I find that I can't do so as a user.
"libusb couldn't open USB device /dev/bus/usb/003/002: Permission denied.
libusb requires write access to USB device nodes."
Can anyone tell me how to fix this please?
Last edited by perseus (2011-01-03 22:46:46)

I did some additional research and found the udev file for libgphoto2: /lib/udev/rules.d/40-gphoto.rules
I also realized that my camera is not listed in that file:
Bus 001 Device 011: ID 04a9:31f6 Canon, Inc.
I tried to add this device and vendor ID to the list of Canon cameras and restarting udev
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="31f6", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="proprietary", MODE="0660", GROUP="camera"
# killall udevd && udevd -d
Unfortunately this didn't work out.
I also tried to add the following line to that gphoto udev file as suggested by Digital Cameras wiki
PROGRAM="/lib/udev/check-ptp-camera", MODE="0660", GROUP="camera"
Still nothing after restarting udev...
My next try was adding the camera to the HAL fdi file /usr/share/hal/fdi/information/20thirdparty/10-camera-libgphoto2.fdi and restarting HAL.
This didn't help either.
I'm getting short on clues...
For sure I can access the camera as root but that's not what I want to do.
!! UPDATE !!
I was dumb. PTP cameras are handled separately so I don't need to have the USB IDs in the udev or fdi files.
So the question is why PTP cameras are not handled correctly, why the group for these devices is not "camera"?
Last edited by KoS (2011-01-03 22:19:57)

No write access to file

I have a blackberry curve 8330. I made a voice note(amr) and then I foolishly made it mid.file so I could make it a ringtone(stupid I know) now I can't delete it because it says no write access to file(or file is in use can not delete but file is not playable and it is not associated with no contacts as a custom ring). I have tried file pro manager and other file managers but I still can't get the audio file off my memory and the file doesn't play just a waste of space. Can you help me?
Solved!
Go to Solution.

When replying, please indicate if you tried the suggestions in the link. Also, provide the exact error message, and any other details you can. I understand the file is corrupt, but I can't troubleshoot further until I get more details.
Post back and we'll take it from there
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Could not complete your request becuase read or write access has been denied

I'm Using Adobe FreeHand MX 11.0, when i need to print out always msg error"Could not complete your request becuase read or write access has been denied".
can your help me solve it?
i'm using Window Vista Home Premium and a try to upgrade the version but still cannot work.

I get that sometimes when I'm trying to export to PDF (same as printing). The solution I found on another forum some time ago:
Go into
C:\Documents and Settings\<user>\Application Data\Macromedia\FreeHand MX\11\English\Settings
and delete the fhprefs.txt file. The next time you start FH, the file will be regenerated and FH will startup like a new installation. I'm using XP but I find I have to do this fairly often. Don't be discouraged if it doesn't work the first time. Keep trying. Also try deleting fhmxxmgr.txt, logging off and back on the desktop and any combination of the aforementioned.

New iMac I can't save files. Need to allow "write access" How do I do this?

New iMac I can't save files. Need to allow "write access" How do I do this?

Sep 30, 2012 8:58 AM
Trying to save images in PS CS6 but keep getting the message that I cannot because "write access not granted"
iMac, OS X Mountain Lion (10.8.2)
This solved my question by Rosbeg39 on Sep 30, 2012 10:53 AM
I AM learning......this is the other screen grab that you wanted
See the answer in context

[SOLVED] Get write permissions with udisksctl

I'm trying to mount a USB storage device as a normal user via
udisksctl mount --block-device /dev/sdb1
After that I can read its contents under /run/media/me/uuid/
but I am unable to write to it.
How do I gain write access (without sudo)?
Additional information:
* I'm not using a desktop environment (xmonad)
* I don't want the drive to automount
Last edited by Aton (2015-04-23 07:06:09)

lucke wrote:If it's ext4, then whatever permissions you give to files and directories on it should matter.
Thanks for the hint!
In /run/media/me/
chown me uuid
apparently solved the problem.
I left the group ownership at root, any objections to that?
It's primarily going to be used for backups.

Write Access to a file in Tomcat server via J2me Midlet

How to make write access to a file using midlet and HTTP connection?
I have text file in the Tomcat server and I am able to read it with HTTP connection using emulator, but don't have idea how to make write access to the file. I'd like to write some text to the file.

Thanks, but could you be more accurate. What methods should I use in the servlet and what methods in the midlet?
Some links which concern this subject, would be nice too. I have tried with google, no success.

Write access to a directory for ASP 2.0 application stops working on Windows 2012 Standard Cloud Server

Just moved our ASP 2.0 based web application to a Windows 2012 Standard Cloud Server. A directory is used for temporary copying of files for the application. The Read Write access is properly given and everything works but then stops working
in about 2.5 hours. The settings are still there, to make things work again typically I add "Everyone" to the security list and apply and then 3 hours later I remove "Everyone" and this refreshes the security setting and things work
againg for a couple of hours. Last Cloud server was 2008 R2 and we had no issues. Recently moved to this new cloud server. Code has been functioning fine for years and can not migrate it to newer ASP since will have to make quite a few code
changes. Obviously a bug which needs to be addressed. Again the security settings do not disappear but are no longer handled properly every 3 hours or so.

Hi,
Is there any other files have the same issue? Please create a test folder and give the same permissions with the directory for ASP 2.0 application to see if the issue still exists.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

How do I allow users to create folders in a shared folder where we all then have read/write access to those new folders?

I have three users who need to access a particular folder on one of our other Macs. The folder resides on the desktop of that particular Mac and it is set as "shared" with all of our accounts set to access the folder. When a user creates a new subfolder in that shared folder, the permissions are instantly set to allow the creator read/write access but the other users are only allowed read-only access. Is there a way to set the permissions so that any new folder created in that shared folder automatically gives read/write access to all accounts who are authorized access to that shared folder?

You should be able to take the permissions you have set and "apply to enclosed items." I am trying to attach a picture of what this looks like so my apologies if it does not work.
Highlight your folder you want and go to File>Get Info or command+I and at the bottom where it has Sharing and Permissions, click the lock button to authenticate. Click the gear and click "apply to enclosed items". See if that works.

Why do I get an error message 'write access not granted' when I try to copy paste jpegs from my folder on desktop to an external hard drive/(Transcend)pendrive

This is a new problem. I transferred some images from my Nikon camera via image capture but converted my raw files to jpegs in the Nikon View nx 2 software and saved them in a new folder on my desktop. I use a 2010 MBP that has OS10.9.5 fully updated. When i tried copying and pasting the jpegs to an external pen drive I got an error message saying the jpg (the number) could not be saved as write access is not granted. I thought the pen drive may be full. So I attached an external hard drive. got the same message. I then opened the same jpeg in photoshop cc and tried saving it as png on the hard drive, got the same message. Was unable to handover the photographs to my client. Was hugely embarrassed. Pl let me know if there is a way out of this and if its a Mac OSX issue? Thanks.

right click on the jpeg (the other mouse button then you use to click with) or on trackpad, hold down control and click, in the menu that pops up, click on "get info" next, if the box labeled "locked" is checked, uncheck it. Down at the bottom, there should be a box with your user name, "staff" and "everyone". to the right of this are options to change these you may need to click the small padlock icon and enter in your password. then change all of the permissions to read and write.

Disable write access to external drives via USB & FW400/800

We have a Mac Pro on our AD network. We want to disable users from having write access to external HDD through USB or FireWire so that they cannot possibly copy data to a attached USB/firewire drives.
Is this possible?

Smith Micro has a product called Internet CleanUp that has the feature your looking for.
http://my.smithmicro.com/mac/cleanup/index.html

NFS write access without local user

Hi,
I try to get write access to NFS from one to another linux system without local user account and group.
System 1. /etc/exports -->set nfs share /backup
Folder /backup all files owned by oracle:oinstall
oracle(104):oinstall(106) 664
System 2. user: root(1):root(1)
#>mount -t nfs .....
All files are owned by userid 104 and groupid 106
I can get write access If I change userid and group id on system 2 to 104/106 but I think that could be smart way.
Does anyone know the right was to get write access without have a same local user(id) and group(id)
Thanks
*T

You can try the following in your /etc/exports file:
/backup *(rw,insecure,all_squash,anonuid=104,anongid=106)
Then reload the exports file using the command "service nfs reload"The above will allow rw access to the /backup directory and map all requests to the nobody account and remap the nobody account uid and guid to 104 and 106 of the nfs server system. The insecure option is required by some PCNFS clients. For more detailed information please check the exports man page.

Hello. I am running the newest version of itunes on my PC. everytime I try to copy a cd to itunes it gives me an error message that says I do not have write access for my itunes media folder or a folder within it. I cannot get this resolved.

Hello. I am running the newest version of itunes on my PC. everytime I try to copy a cd to itunes it gives me an error message that says I do not have write access for my itunes media folder or a folder within it. I cannot get this resolved using the solution given on the error message. I have been using itunes for 4 years and have never encountered this problem until yesterday. Help would be greatly appreciated.

Quit iTunes.
Go to My Music folder.
Select the iTunes folder, right click > Properties.
Click the Security tab and make sure you have full Read/Write privileges.

[SOLVED} no write access to qnap

Similar Messages

Maybe you are looking for