[SOLVED] zsh: Failed to execute operation: No such file or directory
I recently ordered a chromebook (acer c720) and have successfully replaced ChromeOS with Arch Linux. Things were going great the past 2 days but all of a sudden whenever I try to use tab completion on zsh (does not happen in bash or any other shell I've tested) I receive the message:
Failed to execute operation: No such file or directory
My .zprofile is:
emulate sh -c 'source /etc/profile'
#[[ -f ~/.zshrc ]] && . ~/.zshrc
if [[ -z $DISPLAY ]] && [[ $(tty) = /dev/tty1 ]]; then
startx
fi
My .zshenv is:
export PATH=/home/zach/.bin:$PATH
export EDITOR=nano
export BROWSER=firefox
[[ $(tty) = /dev/tty1 ]] && xrdb merge /home/zach/.config/xresources
My .zshrc is:
#source ~/.zshenv
# Lines configured by zsh-newuser-install
HISTFILE=~/.histfile
HISTSIZE=100000
SAVEHIST=100000
HISTCONTROL=ignoredups
setopt appendhistory autocd extendedglob nomatch
bindkey -e
# End of lines configured by zsh-newuser-install
# The following lines were added by compinstall
zstyle :compinstall filename '/home/zach/.zshrc'
autoload -Uz compinit
compinit
# End of lines added by compinstall
PS1=$'\e[1;36m%~\e[0m >>\e[1;36m>\e[0m%] '
#Begin Aliases
alias edit='$EDITOR'
alias sedit='sudo $EDITOR'
alias pacman='sudo pacman'
# Listing
alias ls='ls --color=auto --group-directories-first'
alias lsl='ls --color=auto --group-directories-first -l'
alias lsa='ls --color=auto --group-directories-first -al'
alias lsp='ls --color=auto --group-directories-first -alp'
# Moving/Copying
alias cp='cp -r'
alias rm='rm -r'
alias ...='cd ../..'
alias ....='cd ../../..'
alias bd='cd -'
alias mkdir='mkdir -p'
# System
alias systemctl='sudo systemctl'
alias journalctl='sudo journalctl'
alias cronedit='EDITOR=nano crontab -e'
alias reload-daemons='sudo systemctl daemon-reload'
alias enable='sudo systemctl enable'
alias disable='sudo systemctl disable'
alias start='sudo systemctl start'
alias stop='sudo systemctl stop'
Is there something I'm missing or not considering? The tab completion still works, it just displays that message every time inline and it's really annoying. Also I searched google, the wiki, and the forums for any information regarding this and either my search-fu isn't strong enough or it's not showing up elsewhere.
Last edited by revoltorb (2014-09-13 14:05:44)
Rename the "enable" and "disable" aliases. They are zsh hash table operators.
Similar Messages
-
ORA-27369: job of type EXECUTABLE failed with exit code: No such file or directory
Hi,
I am using the scheduler to take backup of the dev database and it was working fine. Then I added notification to the scripts and then the scheduler started failing with the following code .
BEGIN dbms_scheduler.run_job('BACKUP_DEV'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: No such file or
directory
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
Here' the original which has no issues
#!/bin/bash -x
echo $@
if [ -z "$ORACLE_HOME" ]; then
source /path/oracle/.bash_profile
fi
RMAN="${ORACLE_HOME}/bin/rman";
${RMAN} $@
exit $?
And here's the one which gives me the errors. Also if I run this script from command line it works perfectly fine
#!/bin/bash -x
echo $@
if [ -z "$ORACLE_HOME" ]; then
source /path/oracle/.bash_profile
fi
RMAN="${ORACLE_HOME}/bin/rman";
exec >> temp_log
${RMAN} $@
/usr/bin/mailx -s "Backup status of $ORACLE_SID " [email protected] < temp_log
/usr/bin/rm temp_log
exit $?
Pls let me know what could be the reason that the script fails with the scheduler.Hi,
The user oracle who owns the scheduler already has permissions for the mailx and the same script is able to send notifications when run manully. Do I need to set additional permissions for scheduler ?
Also the db version is 10.2.0.5.
Thanks -
[SOLVED]fail to build package: no such file or directory error
EDIT1: read my last post
I'm getting an error while installing pacman-color from the aur repository. I'm still a newbie so my only guess is to make such directory? why should I have to do that? anyone help?
==> Validating source files with md5sums...
pacman-3.4.2.tar.gz ... Passed
pacman-color-3.4.2-1.patch ... Passed
color.conf ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
/tmp/yaourt-tmp-root/aur-pacman-color/./PKGBUILD: line 21: cd: pacman-3.4.2: No such file or directory
Aborting...
==> ERROR: Makepkg was unable to build pacman-color.
Last edited by aluser (2011-01-21 04:48:16)Here once again a failed attempt after removing pacman-color. I am beginning to think that maybe running yaourt as sudo is probably a bad idea. I think that may have had something to do with it.
archuser@archws ~ % sudo yaourt -S abiword-light <11:54>
Password:
==> Downloading abiword-light PKGBUILD from AUR...
x PKGBUILD
Comment by: mango on Thu, 25 Mar 2010 21:53:12 +0000
./configure --prefix=/usr \
--disable-spell \
--disable-print
Comment by: chessboxing on Wed, 19 May 2010 14:33:51 +0000
doesn't want to build
rule 23: make: command not found
== ERROR: Build Failed.
Aborting...
Eventhough I Had to install flex psiconv, it didn't help.
Its a minefield man.
Comment by: sHyLoCk on Wed, 02 Jun 2010 13:54:43 +0000
http://aur.archlinux.org/packages.php?ID=37738
Comment by: zenny on Thu, 02 Sep 2010 05:59:05 +0000
Quite confusing statements. Below sHyLoCk recommends http://aur.archlinux.org/packages.php?ID=37738 on June 2 2010 and on June 27 he declares his recommended package obsolet and ask a TU to delete! The problem with the sHyLoCk package is there is not page setup option. So I installed this package, it has got the page setup menu, but once I click the option, the application dies with the following output (Maybe helpful to debug for the maintainer, I am not an expert):
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(abiword:32455): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_clear: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_pack_start: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_set_attributes: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_clear: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_pack_start: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_set_attributes: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_widget_get_colormap: assertion `GTK_IS_WIDGET (widget)' failed
(abiword:32455): Gdk-CRITICAL **: gdk_pixmap_colormap_create_from_xpm_d: assertion `drawable != NULL || colormap != NULL' failed
(abiword:32455): Gtk-CRITICAL **: gtk_image_set_from_pixmap: assertion `mask == NULL || GDK_IS_PIXMAP (mask)' failed
(abiword:32455): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(abiword:32455): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_box_pack: assertion `GTK_IS_BOX (box)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_toggle_button_set_active: assertion `GTK_IS_TOGGLE_BUTTON (toggle_button)' failed
(abiword:32455): Gtk-CRITICAL **: gtk_widget_get_colormap: assertion `GTK_IS_WIDGET (widget)' failed
(abiword:32455): Gdk-CRITICAL **: gdk_pixmap_colormap_create_from_xpm_d: assertion `drawable != NULL || colormap != NULL' failed
Aborted
First Submitted: Wed, 15 Apr 2009 17:01:46 +0000
abiword-light 2.8.6-2 : A fully-featured word processor without some gnome dependencies
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> abiword-light dependencies:
- fribidi>=0.10.9 (already installed)
- wv>=1.2.4 (already installed)
- libglade>=2.0 (already installed)
- pkgconfig (already installed)
==> Continue building abiword-light ? [Y/n]
==> ---------------------------------------
==>
==> Building and installing package
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Making package: abiword-light 2.8.6-2 (Fri Jan 21 11:54:35 JST 2011)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading abiword-2.8.6.tar.gz...
--2011-01-21 11:54:35-- http://www.abisource.com/downloads/abiword/2.8.6/source/abiword-2.8.6.tar.gz
Resolving www.abisource.com... 130.89.149.216
Connecting to www.abisource.com|130.89.149.216|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9218827 (8.8M) [application/x-gzip]
Saving to: "abiword-2.8.6.tar.gz.part"
100%[=======================================>] 9,218,827 414K/s in 28s
2011-01-21 11:55:04 (325 KB/s) - "abiword-2.8.6.tar.gz.part" saved [9218827/9218827]
==> Validating source files with md5sums...
abiword-2.8.6.tar.gz ... Passed
==> Extracting Sources...
==> Starting build()...
/tmp/yaourt-tmp-root/aur-abiword-light/./PKGBUILD: line 16: cd: /tmp/yaourt-tmp-root/aur-abiword-light/src/abiword-2.8.6/: No such file or directory
Aborting...
==> ERROR: Makepkg was unable to build abiword-light.
==> Restart building abiword-light ? [y/N]
==> --------------------------------------
==> archuser@archws ~ % <11:find /usr/{bin,lib} -type f -size 0
/usr/lib/python3.1/tkinter/test/__init__.py
/usr/lib/python3.1/tkinter/test/test_ttk/__init__.py
/usr/lib/python3.1/tkinter/test/test_tkinter/__init__.py
/usr/lib/python3.1/test/nullcert.pem
/usr/lib/python3.1/site-packages/ranger/gui/__init__.py
/usr/lib/python3.1/email/mime/__init__.py
/usr/lib/python3.1/email/test/__init__.py
/usr/lib/python3.1/urllib/__init__.py
/usr/lib/python3.1/sqlite3/test/__init__.py
/usr/lib/python3.1/pydoc_data/__init__.py
/usr/lib/python3.1/lib2to3/tests/data/fixers/myfixes/__init__.py
/usr/lib/python2.7/test/nullcert.pem
/usr/lib/python2.7/site-packages/git_remote_helpers/git/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/GL/MESAX/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/GL/VERSION/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/GLU/EXT/__init__.py
/usr/lib/python2.7/site-packages/OpenGL/AGL/__init__.py
/usr/lib/python2.7/site-packages/pychess/__init__.py
/usr/lib/python2.7/site-packages/pychess/widgets/__init__.py
/usr/lib/python2.7/site-packages/pychess/Utils/__init__.py
/usr/lib/python2.7/site-packages/pychess/Utils/lutils/__init__.py
/usr/lib/python2.7/site-packages/pychess/ic/__init__.py
/usr/lib/python2.7/site-packages/pychess/ic/managers/__init__.py
/usr/lib/python2.7/site-packages/pychess/System/__init__.py
/usr/lib/python2.7/site-packages/pychess/Players/__init__.py
/usr/lib/python2.7/site-packages/pychess/gfx/__init__.py
/usr/lib/python2.7/site-packages/xml2po/modes/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/gen_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/f2py_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/pyrex_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/swig_ext/__init__.py
/usr/lib/python2.7/site-packages/numpy/distutils/tests/f2py_f90_ext/__init__.py
/usr/lib/python2.7/site-packages/bzrlib/util/__init__.py
/usr/lib/python2.7/site-packages/bzrlib/util/configobj/__init__.py
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/__init__.py
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_LINK_FAILED
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_EXCEPTION
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_UNPARSEABLE
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/TESTS_FAILED
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/TESTS_INVALID
/usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_UNKNOWN
/usr/lib/python2.7/site-packages/pygame/examples/__init__.py
/usr/lib/python2.7/site-packages/gtk-2.0/egg/__init__.py
/usr/lib/python2.7/site-packages/gtk-2.0/gi/overrides/__init__.py
/usr/lib/python2.7/site-packages/sonata/__init__.py
/usr/lib/python2.7/site-packages/sonata/plugins/__init__.py
/usr/lib/python2.7/email/mime/__init__.py
/usr/lib/python2.7/email/test/__init__.py
/usr/lib/python2.7/sqlite3/test/__init__.py
/usr/lib/python2.7/pydoc_data/__init__.py
/usr/lib/python2.7/bsddb/test/__init__.py
/usr/lib/python2.7/lib-tk/test/test_ttk/__init__.py
/usr/lib/python2.7/lib-tk/test/test_tkinter/__init__.py
/usr/lib/python2.7/lib2to3/tests/data/fixers/myfixes/__init__.py
/usr/lib/purple-2/perl/auto/Purple/Purple.bs
/usr/lib/perl5/vendor_perl/auto/HTML/Parser/Parser.bs
/usr/lib/perl5/vendor_perl/auto/XML/Parser/Expat/Expat.bs
/usr/lib/perl5/vendor_perl/auto/Crypt/SSLeay/SSLeay.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/Irssi.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/UI/UI.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/Irc/Irc.bs
/usr/lib/perl5/vendor_perl/auto/Irssi/TextUI/TextUI.bs
/usr/lib/pidgin/perl/auto/Pidgin/Pidgin.bs
/usr/lib/firefox-3.6/.autoreg
archuser@archws ~ %
Last edited by aluser (2011-01-21 03:02:22) -
Hi Team,
10.2.0.4 Agent startup fails with below errors.Customer is having 30 agents in failover on the same system .Issue is happening for his newly installed agents and existing agents also.
When he stop few agents(like 26th agent and 27th agent... ) and he able to start the agent which is failed to start with below error.Issue looks like lack of some resources to start the agent.
oracle@sorapx2:/u00/app/oracle/ [AGENTFSP] emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
sh: 28400 Killed
/usr/lib/hpux32/dld.so: Cannot map text for library</pkg/FSP/u00/app/oracle/product/agent10g/jdk/jre/lib/IA64N/hotspot/libjvm.so>: mmap(0x0, 0xd51870, 0x5, 0x41, 3, 0x0) returns Not enough space.
oracle@sorapx2:/pkg/FSP/u00/app/oracle/product/agent10g/ [AGENTFSP] emctl start agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
sh: 20806 Killed
Agent is already running
oracle@sorapx2:/pkg/FSP/u00/app/oracle/product/agent10g/ [AGENTFSP] emctl upload agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
sh: 22988 Killed
/usr/lib/hpux32/dld.so: Cannot map text for library</pkg/FSP/u00/app/oracle/product/agent10g/jdk/jre/lib/IA64N/hotspot/libjvm.so>: mmap(0x0, 0xd51870, 0x5, 0x41, 3, 0x0) returns Not enough space.
+ No issues with space:
oracle@sorapx2:/pkg/FSP/u00/app/oracle/product/agent10g/ [AGENTFSP] bdf .
Filesystem kbytes used avail %used Mounted on
/dev/vgfsp1/lvol1 5144576 1973904 3146008 39% /pkg/FSP/u00
Agent also gives below error:
oracle@sorapx2:/u00/app/oracle/emdiag/log/ [AGENTGCP] emctl status agent
Error: failed to load /pkg/GCP/u00/app/oracle/product/agent10g/jdk/jre/lib/IA64N/server/libjvm.so, because No such file or directory
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
sh: 25923 Killed
/usr/lib/hpux32/dld.so: Cannot map text for library</pkg/GCP/u00/app/oracle/product/agent10g/lib32/libclntsh.so.10.1>: mmap(0x0, 0x21cded0, 0x5, 0x41, 3, 0x0) returns Not enough space.
Here emctl agent start command is trying to to load a 32 bit library in stead of the 64 bit.which is causing the issue:
There are a 32 Bit Library and a 64Bit Library available for the agent
oracle@vorakx2:/pkg/HYK/u00/app/oracle/product/agent10g/lib/ [HYK]
file libagtsh.so.1.0
libagtsh.so.1.0: ELF-64 shared object file - IA64
oracle@vorakx2:/pkg/HYK/u00/app/oracle/product/agent10g/lib32/ [HYK]
file libagtsh.so.1.0
libagtsh.so.1.0: ELF-32 shared object file - IA64
set below things properly still same problem.:
export ORACLE_HOME=<path of the agent10g installation>
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
Please suggest me further
+what emctl status agent is loading 32 bit library
+how to resolve the "Not enough space."
Environment Details:
10.2.0.4 OMS
10.2.0.4 Agent
Operating System HP-UX B.11.31 U (64)
SR 3-4636880901
Thanks
NarendraHi Narendra,
I just checked the link and it was ok. So maybe try again?
Copy/past Alain's post:
Hi,
-Buf cache is too high: SAM->kernel-> change dbc_pct_max from 50% to 10%.
-Whith GPM and command "extract" you can find which process consumme too much memory.
-Install lastest Quality Pack.
-With 32 bits processes, you can have problem with memory quadrant restriction. <= you have 64 bit so this is not of use to you
-Check kernel parameter related to max memory used by each process: maxdsiz
-Verify with swapinfo -tam and GPM -> memory.
See doc http://docs.hp.com/en/1218/mem_mgt.html
http://docs.hp.com/en/5580/Misconfigured_Resources.pdf
Alain.
Eric -
Disk Imag Failed to mount Reason: No such file or directory
Hello,
I've been trying to download firefox and msn messenger for my mac!
Everytime i try to launch the .dmg it says 'Failed to mount' and the 'reason' is 'No such file or directory'
This happens with everything i download!
I dn't know what to do!
I've searched it, found some soloutions but nothing works!
Thanks SteveI've had this happen before, if I remember correctly it's just because of a corrupt download. Try downloading the .dmg files again and they should work. The other problem is it may be a permissions error. Where are the files located that you're trying to mount? Try putting them in your home directory. My first guess would be a corrupt download though.
I was suprised to find no information in the support database, or on google for this erorr with disk images.
Hope this helps. -
(solved)screen problem "reopen fifo blabla: no such file or directory"
i cant start screen. it just says "reopen fifo /tmp/screens/S-ramoneur/<random number>.pts-1.arch: no such file or directory"
ive searched google but cant find anything.
ive looked and the folder is there, the permissions is right, and yes i have free space on my /tmp.
i remember having a similiar problem to this before, and solved it just by doing screen -wipe. that doesnt work now.
it seems screen just cant create the file "/tmp/screens/S-ramoneur/<random number>.pts-1.arch" which is weird.
screen has worked perfectly before and i have a fully functioning config which ive used a long time.
anyone know whats wrong?
Last edited by ramoneur (2007-10-05 11:08:36)ah i figured it out now, i was looking for a script that would show my current ram usage in my hardstatus line, which i totally forgot i put in my .screenrc some hours ago. guess i havent started a new screen session since then
well the script obviously fucked everything up xD
does anyone know a simple script that will show my total available ram, and free ram in my hardstatus line?
it doesnt hurt asking one more question i hope...
i want my harddrives info (available gb and free gb) displayed in my hardstatus line aswell
Last edited by ramoneur (2007-10-05 00:33:17) -
ORA-27369: job of type EXECUTABLE failed with exit code:No such file or dir
Hi all,
i am new with DBMS_SCHEDULER and my need is to create a job, without program and schedule, that i can call in an Apex app.
This job run a window *.bat* file via cmd.exe
I test the .bat with doubleclick and it work.
I test window run with the string c:\windows\system32\cmd.exe/c C:/mycompletepath/myfilename.bat > nul and it work.
I execute the following execute DBMS_SCHEDULER.create_job (
job_name=>'EIM_JOB',
job_type=>'EXECUTABLE',
job_action=>'c:\windows\system32\cmd.exe',
number_of_arguments=>1,
auto_drop=>FALSE,
enabled=>FALSE,
comments=>'Job Lancio EIM'
); and the job is created.
I execute this execute DBMS_SCHEDULER.set_job_argument_value('EIM_JOB',1,' /c C:/mycompletepath/myfilename.bat > nul');
execute DBMS_SCHEDULER.enable('EIM_JOB');
execute DBMS_SCHEDULER.PURGE_LOG(job_name=>'EIM_JOB');
execute DBMS_SCHEDULER.run_job('EIM_JOB');but the error ORA-27369: job of type EXECUTABLE failed with exit code: No such file or directory is raised
The argument is uge and reading about it here https://forums.oracle.com/forums/thread.jspa?threadID=701740 here https://forums.oracle.com/forums/thread.jspa?threadID=555102 and here http://www.oracle-base.com/articles/11g/SchedulerEnhancements11gR1.php_ i suppose that my problem is quite about credentials but i need some help or tips to clearly identify, verify and solve the problem.
Any kind of help will be appreciated.
Thanks
AlexHi Ravi,
thank you for your helpful reply.
I am changing my script in order to meet your advices but when i run this execute DBMS_SCHEDULER.CREATE_CREDENTIAL (
credential_name=>'SIECRMWIN',
username=>'myusername',
password=>'mypassword',
database_role=>NULL,
windows_domain=>'SIECRM',
comments=>'Windows credential to run job'); the error PLS-00302: component 'CREATE_CREDENTIAL' must be declared is raised.
My DB is Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Productio
NLSRTL Version 10.2.0.5.0 - ProductionWhich is my mistakes?
Searchibg the internet i found this OracleJobScheduler Windows service, how i can verify if service exist and start it on my server?
Thanks again for any kind of help.
Edited by: OraclePSP on 23-mar-2012 5.59 -
Hi,
I have ACE 4710 Appliance, but it is failed and giving following error while login at console.....
I am suspecting hardware issue..most probably with harddrive.... Please let me know if it can be recoverable of only replacement is the solution..
switch login: init: failed to initialize modlock_init(): No such file or directo ry
eth2: ERROR while getting interface flags: No such device
perform_sysmgr_offline: unable to move MTS to MTS_STATE_OFFLINE: Invalid argumen t (error-id 0x801E0016).
init: failed to initialize modlock_init(): No such file or directory
eth2: ERROR while getting interface flags: No such device
perform_sysmgr_offline: unable to move MTS to MTS_STATE_OFFLINE: Invalid argumen t (error-id 0x801E0016).
init: failed to initialize modlock_init(): No such file or directory
eth2: ERROR while getting interface flags: No such device
perform_sysmgr_offline: unable to move MTS to MTS_STATE_OFFLINE: Invalid argumen t (error-id 0x801E0016).
/isan/sbin/sysmgr: symbol lookup error: /isan/lib/libutils.so: undefined symbol: tftp_callback_fn
Regards
NadeemHi,
I RMAed the appliace, i think it was hardware failure which casue this issue.
If some one face this issue please let me know...Thanks!
Regards
Nad -
Hard Drive Error after Erasing - "No Such File or Directory"
I have a Western Digital My Passport 400GB external HD (bought in April 09). It's been working great but I had it on FAT formatting and let's just say transfers are slow. I borrowed another external drive to back everything up so I could reformat this drive to Mac OS.
Problem came after I backed up everything...I ran Disk Utility to erase the HD and format it in Mac OS Extended (journaled). It successfully erased the Hard Drive on All Zeros, taking 6 days, 5 hours, 50 minutes. Then when it tried to partition, I got the error No Such File or Directory. Here's the log:
"Preparing to zero disk : “Untitled”
Secure Erase completed successfully in 6 days, 5 hours, 50 minutes.
Preparing to erase : “Untitled”
Creating Partition Map
Disk Erase failed with the error:
No such file or directory
Erase complete."
So now the hard drive icon doesn't show up on my desktop, but is recognized in DU (without a volume however). Therefore there is no Mount Point and the drive remains unformatted. Any attempt in DU to partition or erase yields the same error message. Searched these discussions for days now without any luck. Please help!Welcome to the Apple discussions.
I'm not following your problem description .... You said that you successfully erased the hard drive. The next step would be to partition it by giving it a name (you can give it a name under partition or under the erase function) - don't leave it as 'untitled', using Mac OS extended (journaled), a partition size, and ensure under options it says Apple partition map. There are no erasures involved when you partition the drive, which is where I'm confused over your problem description. -
I am getting the following error in iMovie when I attempt to publish a video clip to YouTube: Publishing to YouTube Failed: The operation couldn’t be completed. No such file or directory. Any ideas about what is going on? I did not find anything directly related to this on general google search...
I'm not certain why this error is coming up, but I have almost 500 youtube videos on youtube, all created through the years with iMovie.
Here is what I find. The publishing tool through iMovie is very sketchy, and doesnt work well most the time. Plus you usually lose alot of quality. Go to File>Share>File. This will then save it as a file to wherever you want. Then when you go to upload on youtube, select this file. -
Hi,
I have a <af:inputFile> component which will upload only image file and render the corresponding image...
It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
And in BPM whenever i upload PNG file it throws this error.
Please help.For some files like Images with .png extensions it gives following error :
java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1705)
at java.io.File.createTempFile0(File.java:1726)
at java.io.File.createTempFile(File.java:1803)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) -
Disk Utility "restore" fails with "no such file or directory"
Some time back, perhaps a LONG time ago, I successfully used Disk Utility's "restore" function to "clone" my Mac OS X partition onto an external disk, before I upgraded the OS on my internal drive.
This weekend I tried to do it again, and failed on every attempt.
My first attempt was on my MacBook. At very end (the progress "bar" was all blue) it died saying that there was an error (2), "no such file or directory". I think the external drive probably isn't GUID, which would make it non-bootable, but I'd still think "restore" itself should work.
Okay, let's try my Power Mac G5, which is where it worked several releases ago. Same thing.
Okay, one more try... Booted into safe mode (in case background activity accounts for the missing file/directory), did the restore again, failed again.
I realize that SuperDuper or Carbon Copy Cloner or other tools may be "better", but since this worked once it seems like it still should.
Any ideas?
DougDid you:
A. Repair the hard drive and permissions prior to cloning?
B. Erase the destination drive before cloning?
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone. -
Here is an install log:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for a BSD-compatible install... /bin/install -c
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether gcc and cc understand -c and -o together... yes
checking for pkg-config... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.19... yes
checking for fopencookie... yes
checking for funopen... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for sys/stat.h... (cached) yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for alsa/asoundlib.h... (cached) yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for sys/mount.h... yes
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for calloc... yes
checking for malloc... yes
checking for free... yes
checking for popen... yes
checking for sysinfo... yes
checking for getloadavg... yes
checking for memrchr... yes
checking for strndup... yes
checking for gethostbyname_r... yes
checking for library containing clock_gettime... -lrt
checking for struct statfs.f_fstypename... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for db2x_xsltproc... no
checking for db2x_manxml... no
checking for xsltproc... no
checking if /usr/bin/ld accepts -O1... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/build.h
config.status: creating lua/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
conky 1.7.2 configured successfully:
Installing into: /usr
System config dir: /etc
C compiler flags: -Wall -W
Libraries: -lm -lasound -lrt
Linker flags: -Wl,-O1
* X11:
X11 support: no
XDamage support: no
XDBE support: no
Xft support: no
* Music detection:
Audacious: no
BMPx: no
MPD: yes
MOC: yes
XMMS2: no
* General:
OpenMP:
math: yes
hddtemp: no
portmon: no
RSS: no
Curl: no
Weather
METAR: no
XOAP: no
wireless: no
IBM: no
nvidia: no
eve-online: no
config-output: yes
Imlib2: no
ALSA mixer: yes
apcupsd: yes
I/O stats: yes
* Lua (no) bindings:
Cairo: no
Imlib2: no
Making all in src
/bin/sh: line 17: cd: src: No such file or directory
make: *** [all-recursive] Error 1
A couple of months ago I stumbled upon this problem, but handfixed all entrances in Makefiles recursively, changing explicitly '/bin/sh' on '/bin/bash' (although, /bin/sh is a link on /bin/bash). Now I had do deploy archlinux on another machine and here's the problem, again.
Last edited by cra (2009-10-27 12:43:53)Ok, I rm'ed the src and pkg subdirectories for package cairo-lcd, here's what I have:
(Actually, no specific options for makepkg)
[cra@cratop 07:47:47 ~/downloads/cairo-lcd]
$ ls
PKGBUILD cairo-1.8.8.tar.gz lcd-filter.patch
[cra@cratop 07:48:46 ~/downloads/cairo-lcd]
$ makepkg
==> Making package: cairo-lcd 1.8.8-1 i686 (Wed Oct 21 07:48:50 MSD 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found cairo-1.8.8.tar.gz in build dir
-> Found lcd-filter.patch in build dir
==> Validating source files with md5sums...
cairo-1.8.8.tar.gz ... Passed
lcd-filter.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f "cairo-1.8.8.tar.gz"
==> Entering fakeroot environment...
==> Starting build()...
patching file doc/public/cairo-sections.txt
Hunk #1 succeeded at 326 (offset 7 lines).
patching file src/cairo-font-options.c
patching file src/cairo-ft-font.c
Hunk #2 succeeded at 742 (offset 3 lines).
Hunk #3 succeeded at 1034 (offset 3 lines).
Hunk #4 succeeded at 1091 (offset 3 lines).
Hunk #5 succeeded at 1103 (offset 3 lines).
Hunk #6 succeeded at 1124 (offset 3 lines).
Hunk #7 succeeded at 1162 (offset 3 lines).
Hunk #8 succeeded at 1225 (offset 3 lines).
Hunk #9 succeeded at 1252 (offset 3 lines).
Hunk #10 succeeded at 1500 (offset 3 lines).
Hunk #11 succeeded at 1542 (offset 3 lines).
Hunk #12 succeeded at 1578 (offset 3 lines).
Hunk #13 succeeded at 1697 (offset 3 lines).
Hunk #14 succeeded at 1726 (offset 3 lines).
Hunk #15 succeeded at 2695 (offset 25 lines).
patching file src/cairo-types-private.h
Hunk #1 succeeded at 116 (offset 8 lines).
patching file src/cairo-xlib-screen.c
Hunk #1 succeeded at 143 with fuzz 1 (offset 11 lines).
Hunk #2 succeeded at 159 (offset 11 lines).
Hunk #3 succeeded at 257 (offset 11 lines).
Hunk #4 succeeded at 287 (offset 11 lines).
patching file src/cairo.h
Hunk #1 succeeded at 1046 (offset 78 lines).
Hunk #2 succeeded at 1171 (offset 78 lines).
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for bash... /bin/bash
checking if dolt supports this host... yes, replacing libtool
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether to build gtk-doc documentation... no
checking for gtkdoc-check... no
checking for find... /usr/bin/find
checking for xargs... /usr/bin/xargs
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether gcc and cc understand -c and -o together... yes
checking for inline... inline
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether byte ordering is bigendian... no
checking whether float word ordering is bigendian... no
checking for native atomic primitives... Intel
checking whether atomic ops require a memory barrier... no
checking for native Win32... no
checking for Sun Solaris (non-POSIX ctime_r)... no
checking for cos in -lm... yes
checking for sched_yield in -lrt... yes
checking for stdint.h... (cached) yes
checking for inttypes.h... (cached) yes
checking sys/int_types.h usability... no
checking sys/int_types.h presence... no
checking for sys/int_types.h... no
checking for uint64_t... yes
checking for uint128_t... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for unistd.h... (cached) yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for sys/stat.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/poll.h usability... yes
checking sys/poll.h presence... yes
checking for sys/poll.h... yes
checking sys/un.h usability... yes
checking sys/un.h presence... yes
checking for sys/un.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking for sched_getaffinity... yes
checking fenv.h usability... yes
checking fenv.h presence... yes
checking for fenv.h... yes
checking for feenableexcept... yes
checking for fedisableexcept... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking for signal.h... (cached) yes
checking setjmp.h usability... yes
checking setjmp.h presence... yes
checking for setjmp.h... yes
checking for vasnprintf... no
checking for link... yes
checking for ctime_r... yes
checking for drand48... yes
checking for flockfile... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking for supported warning flags...
checking whether gcc supports -Wall... yes
checking whether gcc supports -Wextra... yes
checking whether gcc supports -Wsign-compare... yes
checking whether gcc supports -Werror-implicit-function-declaration... yes
checking whether gcc supports -Wpointer-arith... yes
checking whether gcc supports -Wwrite-strings... yes
checking whether gcc supports -Wstrict-prototypes... yes
checking whether gcc supports -Wmissing-prototypes... yes
checking whether gcc supports -Wmissing-declarations... yes
checking whether gcc supports -Wnested-externs... yes
checking whether gcc supports -Wpacked... yes
checking whether gcc supports -Wswitch-enum... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wstrict-aliasing=2... yes
checking whether gcc supports -Winit-self... yes
checking whether gcc supports -Wunsafe-loop-optimizations... yes
checking whether gcc supports -Wdeclaration-after-statement... yes
checking whether gcc supports -Wold-style-definition... yes
checking whether gcc supports -Wno-missing-field-initializers... yes
checking whether gcc supports -Wno-unused-parameter... yes
checking whether gcc supports -Wno-attributes... yes
checking whether gcc supports -Wno-long-long... yes
checking whether gcc supports -Winline... yes
checking whether gcc supports -fno-strict-aliasing... yes
checking whether gcc supports -fno-common... yes
checking whether gcc supports -Wp,-D_FORTIFY_SOURCE=2... yes
checking which warning flags were supported... -Wall -Wextra -Wsign-compare -Werror-implicit-function-declaration -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wpacked -Wswitch-enum -Wmissing-format-attribute -Wstrict-aliasing=2 -Winit-self -Wunsafe-loop-optimizations -Wdeclaration-after-statement -Wold-style-definition -Wno-missing-field-initializers -Wno-unused-parameter -Wno-attributes -Wno-long-long -Winline -fno-strict-aliasing -fno-common -Wp,-D_FORTIFY_SOURCE=2
checking how to enable unused result warnings... __attribute__((__warn_unused_result__))
checking how to allow undefined symbols in shared libraries used by test suite... checking whether gcc supports -Wl,--allow-shlib-undefined... yes
-Wl,--allow-shlib-undefined
checking for VALGRIND... no
no
checking for compress in -lz... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for X... libraries , headers
checking for cairo's Xlib surface backend feature...
checking for xlib... yes
checking whether cairo's Xlib surface backend feature could be enabled... yes
checking for cairo's Xlib Xrender surface backend feature...
checking for xlib_xrender... yes
checking whether cairo's Xlib Xrender surface backend feature could be enabled... yes
checking for cairo's XCB surface backend feature...
checking for xcb... yes
checking whether cairo's XCB surface backend feature could be enabled... yes
checking for cairo's Quartz surface backend feature...
checking ApplicationServices/ApplicationServices.h usability... no
checking ApplicationServices/ApplicationServices.h presence... no
checking for ApplicationServices/ApplicationServices.h... no
checking CoreGraphics/CoreGraphics.h usability... no
checking CoreGraphics/CoreGraphics.h presence... no
checking for CoreGraphics/CoreGraphics.h... no
checking whether cairo's Quartz surface backend feature could be enabled... no (requires CoreGraphics framework)
checking for cairo's Quartz font backend feature...
checking whether cairo's Quartz font backend feature could be enabled... no (requires CoreGraphics framework)
checking for cairo's Microsoft Windows surface backend feature...
checking whether cairo's Microsoft Windows surface backend feature could be enabled... no (requires a Win32 platform)
checking for cairo's Microsoft Windows font backend feature...
checking whether cairo's Microsoft Windows font backend feature could be enabled... no (requires a Win32 platform)
checking for cairo's PNG functions feature...
checking for png... yes
checking whether cairo's PNG functions feature could be enabled... yes
checking for cairo's FreeType font backend feature...
checking for FONTCONFIG... yes
checking for FcFini... yes
checking for FREETYPE... yes
checking whether cairo's FreeType font backend feature could be enabled... yes
checking for FT_Bitmap_Size.y_ppem... yes
checking for FT_GlyphSlot_Embolden... yes
checking for FT_Load_Sfnt_Table... yes
checking for FT_Library_SetLcdFilter... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for cairo's PostScript surface backend feature...
checking whether cairo's PostScript surface backend feature could be enabled... yes
checking for gs... gs
checking for LIBSPECTRE... yes
checking for cairo's PDF surface backend feature...
checking whether cairo's PDF surface backend feature could be enabled... yes
checking for POPPLER... yes
checking for poppler_page_render... yes
checking for cairo's SVG surface backend feature...
checking whether cairo's SVG surface backend feature could be enabled... yes
checking for LIBRSVG... yes
checking for rsvg_pixbuf_from_file... yes
checking for cairo's image surface backend feature...
checking for pixman... yes
checking whether cairo's image surface backend feature could be enabled... yes
checking for cairo's user font backend feature...
checking whether cairo's user font backend feature could be enabled... yes
checking for gtk... yes
configure: creating ./config.status
config.status: creating src/cairo.pc
config.status: creating cairo-uninstalled.pc
config.status: creating src/cairo-xlib.pc
config.status: creating cairo-xlib-uninstalled.pc
config.status: creating src/cairo-xlib-xrender.pc
config.status: creating cairo-xlib-xrender-uninstalled.pc
config.status: creating src/cairo-xcb.pc
config.status: creating cairo-xcb-uninstalled.pc
config.status: creating src/cairo-png.pc
config.status: creating cairo-png-uninstalled.pc
config.status: creating src/cairo-ft.pc
config.status: creating cairo-ft-uninstalled.pc
config.status: creating src/cairo-ps.pc
config.status: creating cairo-ps-uninstalled.pc
config.status: creating src/cairo-pdf.pc
config.status: creating cairo-pdf-uninstalled.pc
config.status: creating src/cairo-svg.pc
config.status: creating cairo-svg-uninstalled.pc
config.status: creating Makefile
config.status: creating boilerplate/Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating test/pdiff/Makefile
config.status: creating perf/Makefile
config.status: creating util/Makefile
config.status: creating doc/Makefile
config.status: creating doc/public/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing ./build/Makefile.win32.features commands
config.status: creating ./build/Makefile.win32.features
config.status: ./build/Makefile.win32.features is unchanged
config.status: executing ./src/Makefile.am.features commands
config.status: creating ./src/Makefile.am.features
config.status: ./src/Makefile.am.features is unchanged
config.status: executing ./src/Makefile.win32.features commands
config.status: creating ./src/Makefile.win32.features
config.status: ./src/Makefile.win32.features is unchanged
config.status: executing ./boilerplate/Makefile.am.features commands
config.status: creating ./boilerplate/Makefile.am.features
config.status: ./boilerplate/Makefile.am.features is unchanged
config.status: executing ./boilerplate/Makefile.win32.features commands
config.status: creating ./boilerplate/Makefile.win32.features
config.status: ./boilerplate/Makefile.win32.features is unchanged
config.status: executing src/cairo-features.h commands
config.status: creating src/cairo-features.h
config.status: executing ./src/cairo-supported-features.h commands
config.status: creating ./src/cairo-supported-features.h
config.status: ./src/cairo-supported-features.h is unchanged
config.status: executing ./build/Makefile.win32.features-h commands
config.status: creating ./build/Makefile.win32.features-h
config.status: ./build/Makefile.win32.features-h is unchanged
cairo (version 1.8.8 [release]) will be compiled with:
The following surface backends:
Image: yes (always builtin)
Xlib: yes
Xlib Xrender: yes
Quartz: no (requires CoreGraphics framework)
Quartz-image: no (disabled, use --enable-quartz-image to enable)
XCB: yes
Win32: no (requires a Win32 platform)
OS2: no (disabled, use --enable-os2 to enable)
PostScript: yes
PDF: yes
SVG: yes
glitz: no (disabled, use --enable-glitz to enable)
BeOS: no (disabled, use --enable-beos to enable)
DirectFB: no (disabled, use --enable-directfb to enable)
The following font backends:
User: yes (always builtin)
FreeType: yes
Win32: no (requires a Win32 platform)
Quartz: no (requires CoreGraphics framework)
The following functions:
PNG functions: yes
And the following internal features:
gcov support: no
test surfaces: no (disabled, use --enable-test-surfaces to enable)
ps testing: yes
pdf testing: yes
svg testing: yes
--- The XCB surface backend feature is still under active development and is
--- included in this release only as a preview. It does NOT fully work yet
--- and incompatible changes may yet be made to XCB surface backend specific
--- API.
make all-recursive
make[1]: Entering directory `/home/cra/downloads/cairo-lcd/src/cairo-1.8.8'
Making all in src
/bin/sh: line 17: cd: src: No such file or directory
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/cra/downloads/cairo-lcd/src/cairo-1.8.8'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
[cra@cratop 07:49:13 ~/downloads/cairo-lcd]
$ -
Failed at step EXEC spawning /bin/plymouth: No such file or directory
Hi guys, Yet Another Plymouth Problem:
I just did a system update. Haven't done this for several months and problems with /bin happened, as expected. Anyway, after update completed, the system won't boot normally:
If I type ^d boot continues with no problems and all services are started as expected. I have trouble finding what causes the system to go to emergency mode. The /srv/nfs/trunk/ seems to be mounted at a second attempt.
An excerpt from journalctl -xb, right after the xfs messages :
Sep 18 00:55:50 xxxlinux systemd[1]: Startup finished in 2.322s (kernel) + 1.350s (userspace) = 3.672s.
-- Subject: System start-up is now complete
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- All system services necessary queued for starting at boot have been
-- successfully started. Note that this does not mean that the machine is
-- now idle as services might still be busy with completing start-up.
-- Kernel start-up required 2322291 microseconds.
-- Initial RAM disk start-up required INITRD_USEC microseconds.
-- Userspace start-up required 1350682 microseconds.
Sep 18 00:55:50 xxxlinux systemd[168]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
-- Subject: Process /bin/plymouth could not be executed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/641257651c1b4ec9a8624d7a40a9e1e7
-- The process /bin/plymouth could not be executed and failed.
-- The error number returned while executing this process is 2.
Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Version 2013.1.13 external FUSE 29
Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Mounted /dev/sdb6 (Read-Write, label "", NTFS 3.1)
Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Cmdline options: rw,uid=1000,gid=100,dmask=022,fmask=133
Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Mount options: rw,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sdb6,blkdev,blk
Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Global ownership and permissions enforced, configuration type 7
Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:0: [sde] Attached SCSI removable disk
Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:1: [sdf] Attached SCSI removable disk
Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:2: [sdg] Attached SCSI removable disk
Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:3: [sdh] Attached SCSI removable disk
After I press ^d:
Sep 18 00:56:21 xxxlinux systemd[1]: Stopping Sound Card.
-- Subject: Unit sound.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sound.target has begun shutting down.
Sep 18 00:56:21 xxxlinux systemd[1]: Stopped target Sound Card.
-- Subject: Unit sound.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/9d1aaa27d60140bd96365438aad20286
-- Unit sound.target has finished shutting down.
Sep 18 00:56:21 xxxlinux systemd[1]: Stopping Emergency Mode.
-- Subject: Unit emergency.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit emergency.target has begun shutting down.
Sep 18 00:56:21 xxxlinux systemd[1]: Stopped target Emergency Mode.
-- Subject: Unit emergency.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/9d1aaa27d60140bd96365438aad20286
-- Unit emergency.target has finished shutting down.
Sep 18 00:56:21 xxxlinux systemd[1]: Stopping Emergency Shell...
-- Subject: Unit emergency.service has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit emergency.service has begun shutting down.
And the system boots.
I found a thread explaining that there is a sysV runlevel specified in kernel boot line. I am not sure if I am looking at the proper file, but my /boot/grub/grub.cfg does not contain "runlevel".
I also found it may be a problem of software RAID, but I am not using it neither LVM, plain mounts by UUID.
I ran pacman -S linux, /etc/mkinitcpio.conf does not contain a reference to plymouth: HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
Just checked with my laptop, both computers run systemd-204-3, neither have /bin/plymouth, but the laptop does not fail with this message
Just tell me if you need more information.# Intel SSD 1
UUID=775642a3-f485-4cc6-b9d5-c336aa276c39 / xfs rw,relatime,attr2,inode64,noquota 0 1
# Intel SSD 2
UUID=75232369-0f3f-45f5-99fe-234089a1ea8e /boot xfs rw,relatime,attr2,inode64,noquota 0 2
# Intel SSD 3
UUID=595fa411-2c31-48e1-960b-fad259460248 /home xfs rw,relatime,attr2,inode64,noquota 0 2
# WD 1T 1
UUID=4fcb28a9-66fe-4463-9f31-e325d62d5017 /mnt/wd1 xfs rw,relatime,attr2,inode64,noquota 0 2
# WD 1T 2
UUID=4803c5db-72a3-4cd5-ad94-f7de2de2ea09 /mnt/wd2 xfs rw,relatime,attr2,inode64,noquota 0 2
# WD 1T 3
UUID=b937ce12-31a4-4816-9630-d53cab774a7e /mnt/wd3 xfs rw,relatime,attr2,inode64,noquota 0 2
# SG 320G 1 1
UUID=76fd28c6-1541-40bd-958b-cd05d787ff7b /mnt/sg1_1 xfs rw,relatime,attr2,inode64,noquota 0 2
# SG 320G 2 1
UUID=789845B4984571A4 /mnt/sg2_5 ntfs-3g uid=1000,gid=users,dmask=022,fmask=133 0 0
UUID=32BC47F9BC47B5DF /mnt/sg2_6 ntfs-3g uid=1000,gid=users,dmask=022,fmask=133 0 0
tmpfs /tmp tmpfs nodev,nosuid,size=20G 0 0
# NFS mounts
/mnt/multimedia /srv/nfs/multimedia none bind 0 0
/mnt/images /srv/nfs/images none bind 0 0
/mnt/trunk /srv/nfs/trunk none bind 0 0
[2] ognyan@xxxlinux : ~ >ll /mnt/
total 40K
drwxr-xr-x 8 root root 124 Jun 13 01:22 .
drwxr-xr-x 18 root root 4.0K Sep 17 23:52 ..
lrwxrwxrwx 1 root root 3 Jun 4 17:16 images -> wd1
lrwxrwxrwx 1 root root 3 Jun 4 17:16 multimedia -> wd2
drwxr-xr-x 23 ognyan users 4.0K Sep 19 14:37 sg1_1
drwxr-xr-x 1 ognyan users 8.0K Mar 30 21:28 sg2_5
drwxr-xr-x 1 ognyan users 12K Mar 30 21:28 sg2_6
lrwxrwxrwx 1 root root 3 Jun 3 21:27 srv -> wd3
lrwxrwxrwx 1 root root 5 Jun 4 17:15 trunk -> sg1_1
drwxr-sr-x 203 ognyan users 8.0K Aug 4 20:53 wd1
drwxr-xr-x 5 root root 41 Sep 19 10:32 wd2
drwxr-xr-x 8 root root 76 Aug 31 23:13 wd3
Last edited by bigblondewolf (2013-09-19 22:15:36) -
Operating system message: No such file or directory in DMS while archivng.
Dear Team,
While i am trying to make the archiving i am getting the error "
Operating system message: No such file or directory" in DMS. I cross checked all the forums and made the settings as suggested still i am not able to resolve this. In fact it is working fine in my development system but not executing in Quality server.
Please do the needful.
Regards,
BanuHi Bhanu,
Check with technical details like archive directory ,customising settings on sara . I think so u made transport archive setting TR into quality server ?. On some repository the changes won't happen with imported TR on target system. Please cross check and do manually on quality server. My guess problem with OAC0 , OACT .
Regards,
chandu
Maybe you are looking for
-
Dear Experts can anybody please help me in getting ageing report project wise . We already have the ageing report Debtors or Creditors wise in the system but i want the ageing report project wise warm regards anand
-
How to create Mouse rollover/rotate actions
Hi! Thanks for reading. I'm interested in learning how to create a "3d" object that a user can interact with using their mouse. I've taken 60+ pictures of a camera rotating by 5 degree increments and I'm trying to put together something similar to wh
-
Grey startup screen and problems with disk utility
hey all, I recently started up my powerbook and it froze on the grey screen that you see right after startup. I also noticed that the hard drive wasn't making any noise like usual. I then booted from DVD to run disk utility. The disk utility can see
-
I use a Microsoft keyboard with my Mac. Can someone tell me how I can get my Delete key to Move objects to the Trash? TIA, David p.s. I looked at Ukelele but there didn't seem to be any way of creating a binding for the delete key.
-
Can't open InDesign 5.5 file in CS5.5
We've received a set of InDesign files from a designer which has been created in CS5.5. I just tried to open the indd file on our production laptop, using InDesign CS5.5 and I'm getting an error message 'CannotConvertNewerDocument'. I can't underst