Some activity is not showing in CM01 report

Hello Expert ,
There are five activity under one network have work hour and work center ( is same for all 5 activity ) but when i execute a report CM01 to see the load on work center , i found only 2 activity is showing in that reeport not rest 3 even the work center and plant is same for all 5 activity , i am not able to understand this , pl help me to sort out this issue.
Let me know if required more detail on this.
Thanks in advance
Regards
Amit Srivastava

HI Amit,
I suppose, that the capacity requirements are not created for the rest 3 activities. You may compare the status, dates and controlling key of the 3 activities with other 2 activities.
From technical view, you can check the KBED table (for capacity requirement) records. To read the recods, you need the value of 'BEDID', which you can get from the view CAUFV using AUFNR (network ID). Hopely you can use the SE16 transaction.
Kind regards
Zhenbo

Similar Messages

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Reg Batch in delivery some items are not showing gross weight please help

please give me your help
in Deliveries some items are not showing gross weight
please give me some help

Dear Ramsuresh,
Check are maintaining gross weight in the Master data of those items or not.
If not maintain in the Material master then create delivery
I hope it will help you
Regards,
Murali.

Some videos are not showing in Apple TV playlist after upgrade to 6.0. Can play on Macbook itunes and using airplay to Apple TV. Anybody else have this issue?

Some videos are not showing in my Apple TV playlists after upgrade to 6.0. They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV. Anybody else have this issue?

Ok, so I'll try again. Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update? It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV. These are not "home movies." They are legit mp4 movies that worked great under v5.

Option claims from CRM are not showing in BW report.

Hi All,
We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
Haaris..

Hi,
I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
The infoset has four DSOs and one characteristic as components.
Please let me know if you get any idea?
Haaris.

SSRS 2012 some users are not able to edit reports in the server

Hello All,
I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
using report builder 3.0.
Please help me

Hi harshad_mule,
Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
To fix this issue, we can try to refer to the following steps:
If Report Builder is corrupted, we can update the Reporting Services to repair this.
Check that the Report Builder application is existing
Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
If it is existing, please use the following URL to access the Report Builder directly:
http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Some Open programs not showing indicator light in dock in 10.8

After upgrade to OSX 10.8 some applications are not showing the indicator light in dock when they are open, even with the check box checked in dock preferences. Also, the only App available in command+tab is Finder. I think these are related.

I've seen this around various forums. It seems to be a bug although I haven't gone looking/asking to see if someone at Apple has noted it.
There are two fixes. Restart or open terminal and run:
killall -KILL Dock
This will restart just the dock and that should fix the dock and the cmd+tab (which is part of the same process).

Safari 6.0.1 not showing in System Report (installations)

I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

Now in Mountain Lion we do not have the update info in Software Update
If you click your Apple menu icon you should see Software Update from the drop down menu.
Clicking Software Update should open the App Store for you.

Thumbnails on some websites will not show up

I have Firefox 22 & WinXP Pro. Some websites will not show a thumbnail picture on my home page. I have read all the articles on thumbnails & none of them help. I have cleared the cache, loaded the page by left clicking the blank thumbnail & letting it load. They are NOT https sites & I do not use private browsing. The sites WILL show pictures on my homepage in Google Chrome, so it's not the website. I will try to attach a screenshot, but I do not see a browse button. Can anyone help?
Thanks,
Phil

Hi Cor-el:
Thanks for responding. I went to Tools/Page Info, but couldn't find a "general" category. The website http://www.bridgeclues.com/ does show up in Chrome & used to show up in Firefox. How can I tell if there's a no-store or no-cache header?
Phil

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

Activity is not showing up in DTR

Hi ,
I've checked out few Java files in DC by creating the activity and did some coding in it. I didnt check IN the code for a day. Next day my system crashed out and i had installed the NWDS and connected to DTR again and imported the configuration. The Activity that i have created before the crash is not showing up in the development configuration perspective. All the files that i had checked out before the crash are now in Writable mode but i when i try to edit and save the file it shows "<b>Save could not be completed , Files are not checked our for edit</b>". How to find the pending activity in my name in DTR and check in that activity
Thanks,
Saravanan

Hi Saravanan,
First Check whether the activity you created is existing on the DTR server or not.
To find that follow the below procedure:
Access the DTR server using the URL:
http://<host>:<http-port>/dtr/
Then, go to "system tools" and then "reports".
Then, click on "Activity Search". In the Workspace field, give the name of the workspace in which the activity was created. Give the path starting from "ws" folder upto the "workspace" name. Then, select whatever filters you require. For example, Opened only or Closed-only. Then, click on "Show".
This will list the Open-Activities.
Then you can proceed accordingly.
Reward points if helpful.
Regards,
Sumanth Manjunath

S_bce_68001439 is not showing complete information (Report RSUSR100)

Hi All,
i have executed transaction s_bce_68001439 to get the information about the changes in the following areas:
1- Users that are created during the year
2- Users that are deleted during the year
3- Users whose access rights are modified during the year
4- Users that have been created and then deleted during the year which are not appearing the USR02 table.
But the problum i am facing with this report is, the report is not showing all the information. Users that are careated during the year and are still active and appearing in the table usr02 are not appearing in the s_bce_68001439 report. Further, rights of certain users which i m aware that i have modified during the year, are also not appearing in the report. Due to these facts i am confused with the completness of this report.
Can any one from this forum help me in getting the complete report which can fulfil my objectives as mentioned above. Further, can any one tell me the tables that are used by this report to extract data.
Further, if there is any other mean to get the above mentioned information, please tell me how.
Please help me.
thx in advance
Salman

Hi Beckers,
I am a member of SAP_ALL profile and have access to all the SAP transactions. so, there is no issue with the authorization. Further, I do not have any system refresh where the tables are deleted.
Beckers, is there any other option thorugh which i can obtain the desired information i.e. directly through SAP tables or some other transactions or reports etc.
The issue is not only comming with the 2009 users but also with the 2008 users data. which was OK in the last year. but now some of the information of the previous users are also missing if i am running the report for the previous year i.e. 2008.
Thx
Salman

Why some photos do not show up in the widgets after final export?

Why do I have a problem with the FeatureD News Widget not showing all my photos? I have tried redoing it many times over in different formats and all but one photo never shows up in the final export. Please I need help to finish up the website.

If I understand this correctly, you are reporting that you have images in your Featured News' target frames and some of those photos do not show up in the published site.
If so, I would like you to confirm if the widget works fine in Preview within Muse? Are the images missing in all browsers, even after clearing the browser cache? Can you provide a link to a published site? If required I may also request your source Muse file to investigate further.
Thanks,
Vikas

Some thumbnails do not show up in organizer

I have created a catalog with all my photos. There is a folder listing at the left of the screen. Some of the files in those folders do not appear in the thumbnails. They are all jpg files. If i try to import the files that are missing I am told they are already in the catalog. Still cant see them. I am also having trouble navigating the forums. New to this.

If I understand this correctly, you are reporting that you have images in your Featured News' target frames and some of those photos do not show up in the published site.
If so, I would like you to confirm if the widget works fine in Preview within Muse? Are the images missing in all browsers, even after clearing the browser cache? Can you provide a link to a published site? If required I may also request your source Muse file to investigate further.
Thanks,
Vikas

Some SQL fields not showing data in Crystal XI R2

I have a report that is using a stored procedure. In this stored procedure we have many fields that are being passed over to Crystal. A small portion of these fields do not show any data when you browse them in Crystal. But when you check on the SQL Server 2005 side, they contain data. So we know that the issue is probably on the Crystal side because there is data on the SQL side.
I originally thought that the problem may be caused by Null values in the database, but I used Crystal to convert the Null's to numeric zero if it was a number, and still there was no data showing up.
Also in the stored procedure, we are passing 2 parameters a start and end date. But that seems irrelevent to why some of the fields are not containing data like they should.
Why would some fields show no values at all, and some fields shows values?
Any ideas on how to correct this situation so data will show up for all the fields like they are suppose too?
Thanks everyone for their help!

Hi Levi,
Pleaase check the following :
1. Other than storedprocedure are you adding any tables to your report ? If so, check the links between your stored procedure.(Through Database Expert)
2.Write the following formula to find out whether the database fields contains values or not.
if isnull() or = " " Then
"This Field is Empty"
Else
Drag and dwop this formula in your report to get the field values.
Thanks,
Sastry

Some activity is not showing in CM01 report

Similar Messages

Maybe you are looking for