Some files in HTMLResources not loading in single edition developer app

Good day again.
I have created a single edition app and it works perfectly when tested in Content Viewer. The moment I install the Developer .ipa the PDF files I loaded in the HTMLResources.zip folder does not load.
Any ideas what I did wrong?
Thanks

Anyone? I installed DPS v32.1 hoping that will solve the problem but still no joy.
The Single Edition app I build works fine on both iOS7 and 8 when viewed in the Content Viewer, but as soon as I download the Developer App the PDF files I embedded in the HTMLResources.zip file does not load?
Please, any help out there?
Stefan

Similar Messages

Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

Some web pages are not loading on my Macbook pro, Safari,firefox,chrome,opera! Some web pages are loading pictures like thumbnails. Pls i need helpppppppppp!

It would help us help you if you provided a link to a non working page.

I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Can you self-distribute a single edition folio app?

Currently I am using the Adobe Content viewer to distribute folio's for a couple of clients. One client would like single edition folio apps created, but doesn't like the idea of them being in iTunes. Is it possible to self-distribute (publish) a single edition folio app outside of iTunes? Much the same way you can already create any type of iPad app and create an installable package without having to go through iTunes...
Thanks for any assistance,
Greg B

The only way to do so is to create a developer version of the app but it
will expire and will be limited to 100 UDIDs.
In short, this isn't going to happen without enterprise level accounts
with Apple and Adobe and is still subject to licensing restrictions set
forth by Apple for app distribution.
Bob

Files appended but not loaded

Hi
I have created a save function in my program to save new data and append it at the end of a single file. Here is the code.
private void SaveActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_SaveActionPerformed
       Vector<PointOnFret> vectorToSave = gPanel1.getFretPointsVector();
       String chordName = JOptionPane.showInputDialog("Enter chord name");
       Chord chordToSave = new Chord();
       chordToSave.setName(chordName);
       chordToSave.setPositions(vectorToSave);
     try{
            FileOutputStream fis = new FileOutputStream(FILENAME,true);
            ObjectOutputStream out = new ObjectOutputStream(fis);
            out.writeObject(chordToSave);
            out.flush();
            out.close();
     catch(IOException ioException)
        JOptionPane.showMessageDialog(null, "Error opening File","Error",JOptionPane.ERROR_MESSAGE );
    }But I think the save works just fine...
Probably the problem is in the loading of the vector that contains those records in the file.
It loads the name of the first record of the file but does not open it...
private String [] loadChordsVector()
        try
            FileInputStream fis = new FileInputStream(FILENAME);
            ObjectInputStream ins = new ObjectInputStream(fis);
            int records = 0;
            boolean read = true;
             Chord savedChord = null;
            do
                 records++;
                 savedChord = (Chord)ins.readObject();
                 if(savedChord != null)
                     chords.add(savedChord);
            }while(savedChord == null);
            ins.close();
            System.out.println("Records "+ records);
            String [] chordNames = new String[chords.size()];
            for(int i = 0; i < chords.size(); i++)
                Chord chord = chords.get(i);
                chordNames[i] = chord.getName();
            return chordNames;
        catch (ClassNotFoundException ex) {
            Logger.getLogger(GFriendView.class.getName()).log(Level.SEVERE, null, ex);
            String[] dummy = {"Test"};
            return dummy;
        catch(IOException ioException)
            ioException.printStackTrace();
            JOptionPane.showMessageDialog(null, "Error opening File","Error",JOptionPane.ERROR_MESSAGE );
            String[] dummy = {"Test"};
            return dummy;
    }Can you pls tell me where do you see something wrong?
I'm a bit confused

I don't really understand your problem, but it seems to me your while condition is not logical.

Why are some of my websites not loading all the way after loading 7.0.1?

I upgraded to 7.0.1... CNN, eBay, webemail, banjohangout.org (modal windows script needs files from widget) and some other websites do not open properly . I am running XP 32. I upgraded Radeon x1600 video drivers upgraded to v. 8.593 (10.2). Troubleshoot in Firefox 7.0.1 says WebGL & GPU blocked...customer needs to upgrade to v. 10.6 or higher. ATI (manufacturer) does not have V.10.6. What now?

-> Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
-> Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Check and tell if its working.

Deploy WAR file - Servlets are not loaded

Hi,
I deploy a WAR file through a Application server console. The Deployement was successful. I restart the oc4j and http servers. After that i check the status, The servlets are NOT LOADED. Pls anybody provide a solutions.
Thanks!

Did you ever call them? Only then they're loaded - assuming you are looking at the status, using OEM

3.6.16 doesn't support Mac PowerPCS so some video content will not load

I am running Mac OS 10.4.7 on a Mac Mini Power PC. Firefox 3.6.16 does not support Power PCs (i.e. pre Intel). Video content on many sites will not load using 3.6.16 and I cannot use this version of your browser. I am happy to keep using 3.6.12 which does support Mac Power PC but 3.6.16 keeps downloading automatically even though I have set Advanced controls in Preferences to not do this (unchecked the three boxes enabling auto updates). I am extremely unhappy about this. Can you tell me some way I can stop 3.6.16 from automatically downloading and updating my browser against my wishes?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

I've set the download settings to always ask where to save a file, and it will do that for some file extensions, but not for others. How can I fix this?

I've noticed it especially with .pdf files, which always end up on my desktop, even after I double check the download settings under Preferences and then restart Firefox, just in case. Also, when I download .pdf files they will automatically open, but when I download .doc files they do not. I would rather not have downloaded files automatically open, but I can't find how to change that setting either.

You can check for problems with preferences.
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Some files videora will not convert no matter what

Just as the title says, I've got some files that just won't convert in videora. I've got a few .mpegs, and whole bunch of .movs that just won't convert, or convert properly. The audio is always either fast, or lagging for the mpegs.
For the .movs, they just won't convert at all, meaning, "Transcode completed" = 0 kB
I can't figure out a way to convert these certain videos. Videora so far is my only converting method. Can anybody tell me if I'm doing something wrong? Or suggest another converting application (preferrably free) that I can use.
Thanks for the time.

I have successfully converted (when my IPod was working) using Videora. I would bet you have the wrong 'Quality Profile Setting". The only one I use (and it works everytime) is:
MPEG-4/320x240/768kbps Stereo/128kbps
I have converted MP3's, .MOV, MPEG as well as my DVD's in my collection. all with success, until my IPod died for the 4th time. I have instructions, if you want, but I think that is your problem. [email protected]
Good Luck, you are going to need it.

Some Safari pages will not load

Hello!
I went on a mission for my church and left my computer home, turned off. When I returned, I found that Safari would not load most web pages (facebook, gmail, etc). The text shows up, but not the formatting/design/etc.
I upgraded to Snow Leopard today thinking that might fix the problem (I formerly was on OSX 10.5.8). My computer is now updated to Mac OS X 10.6.8. I can't update to Maverick because my app store will not open.
Anyone know what's going on?
Thank you.

lcmongie --
Very basic question, I know . . . but have you turned off and unplugged both your Mac, Router, and/or Modem?
And then restarted router/modem first, and when lights have settled down, restarted yur Mac?

Some web pages will not load (Google Maps, TV Guide Listings etc)

Not all pages loading. Google "Home", "News", "Gmail" work fine, Google MAPs will not load. TV Guide "Home" is fine, "TV Listings" will not load.

lcmongie --
Very basic question, I know . . . but have you turned off and unplugged both your Mac, Router, and/or Modem?
And then restarted router/modem first, and when lights have settled down, restarted yur Mac?

Can't export 'Could not load image' in new photos app

Since upgrading to the new photos app I'm having trouble exporting photos within folders where it gives me the error 'could not load image' have tried running a repair on the library but no luck. In iTunes when I go to sync the folder it comes up with 0 which makes me think they could be corrupted somehow. Please help

For me this problem was caused because I moved my iPhoto library to a different hard drive before converting it to Photos. I solved this by doing the following:
1) Opened the original iPhoto library with iPhoto in the original location, and made sure the Photos/Movies that did not work were working.
2) In iPhoto, I chose File->Switch Library and chose the original iPhoto Library
3) I moved the library to the new hard drive
4) I held down the Option key while launching iPhoto
5) I chose "Other Library" and selected the original iPhoto library in the NEW location
6) Quit iPhoto
7) Open the Original library in the NEW location with Photos
After it converted the iPhoto library to a Photos library, everything seemed to work.
Steps 1 through 6 came from this article:
http://appleinsider.com/articles/15/01/25/how-to-safely-move-your-macs-iphoto-li brary-onto-an-external-drive
Hope this helps. If you don't have your original Library, I am not sure what to do.

BC IN-Browser Editor not loading pages for editing.

Hi,
From Bc admin I click the edit button to open in browser editing.
The editor opens and the index page loads and is editable.
When I click the link to the about page (example) or any other page the page loads fine but none of the editable regions are visible.
If I look in my browser address bar I see that although I am viewing the about page the address is still showing the index page. If I manually update this to about.html the browser then navigates to the about page and I am able to use the in browser editing options.
I have another site in BC whiere the in browser editing works fine, each page is editable from clicking the menu link. So I feel this is an issue parculiar to this site but I cant see the difference between the two sites that could be causing the one to have this issue.
Any help would be greatly appreciated.
Cheers Cas

Hi Aish,
Thank you for your reply. I'm not using muse on the sites I mentioned though I have used it on another site and am not experiencing any issues with the In-Browser editing.
The issue is as mentioned in the thread you pointed me to, the browser address remains the same from page to page but if I update it manually I can then edit it.
I had read the thread but sadly there is no solution offered in it.
Thanks again
Cas

Maps not loading in "Places", inside Photo app

On my 3G, after the upgrade to iOS4, in the Photo app, the "places" map doesn't load...
The app shows the foto-pins (correctly placed), but doesn't load any map from google... I already tried both in WiFi and 3G only mode, but the app just shows a "squared grey map" (i.e. no map loaded).
I also tried to start the app in airplane mode, and the popup reminding that a data connection is needed, correctly shows up...
Any clue?
Thanks

Sorry to contradict you but I've zoomed in and out on the map that appears in Photos > Places on an iPhone 3G under iOS4 once the map has been forced to appear correctly and I can go from one small part of the UK to the entire world and back again. Yes, the update of the map is not too quick (depending on 'scale'), but it does work and you can scroll without problem.
When there are several pins in a small area, zooming in spreads them out and updates the map too.

Some files in HTMLResources not loading in single edition developer app

Similar Messages

Maybe you are looking for