Some help with my xorg and a 1920x1080 [SOLVED]

Question

Hi all I've exhausted my abilities and knowledge with xorg, modelines, and willingness to get lost on google.
I currently own a HP 2159m  1920x1080@60 natural res /refresh.  I'm running that on an old Nvidia 5600Ultra  ... so I'm using the nvidia-173xxx drivers
I'm currently unable to get this thing into 1920x1080@60
What ever you need me to post I will so that I can get this thing out of the cruddy condition it is in (monitor doesn't like the video very much right now)
Thanks
[edit]
Ok this bit confuses me
I get this when do the following
startx -- -logverbose 6
(--) NVIDIA(0): --- EDID for HP 2159 (DFP-0) ---
(--) NVIDIA(0): EDID Version : 1.3
(--) NVIDIA(0): Manufacturer : HWP
(--) NVIDIA(0): Monitor Name : HP 2159
(--) NVIDIA(0): Product ID : 10283
(--) NVIDIA(0): 32-bit Serial Number : 16843009
(--) NVIDIA(0): Serial Number String : CNT909Z46T
(--) NVIDIA(0): Manufacture Date : 2009, week 9
(--) NVIDIA(0): DPMS Capabilities : Standby Suspend Active Off
(--) NVIDIA(0): Prefer first detailed timing : Yes
(--) NVIDIA(0): Supports GTF : No
(--) NVIDIA(0): Maximum Image Size : 480mm x 270mm
(--) NVIDIA(0): Valid HSync Range : 24.0 kHz - 94.0 kHz
(--) NVIDIA(0): Valid VRefresh Range : 48 Hz - 76 Hz
(--) NVIDIA(0): EDID maximum pixel clock : 170.0 MHz
(--) NVIDIA(0):
(--) NVIDIA(0): Established Timings:
(--) NVIDIA(0): 640 x 480 @ 60 Hz
(--) NVIDIA(0): 800 x 600 @ 60 Hz
(--) NVIDIA(0): 1024 x 768 @ 60 Hz
(--) NVIDIA(0):
(--) NVIDIA(0): Standard Timings:
(--) NVIDIA(0): 1280 x 960 @ 60 Hz
(--) NVIDIA(0): 1280 x 1024 @ 60 Hz
(--) NVIDIA(0): 1440 x 900 @ 60 Hz
(--) NVIDIA(0): 1600 x 1200 @ 60 Hz
(--) NVIDIA(0): 1680 x 1050 @ 60 Hz
(--) NVIDIA(0):
(--) NVIDIA(0): Detailed Timings:
(--) NVIDIA(0): 1920 x 1080 @ 60 Hz
(--) NVIDIA(0): Pixel Clock : 148.50 MHz
(--) NVIDIA(0): HRes, HSyncStart : 1920, 2008
(--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200
(--) NVIDIA(0): VRes, VSyncStart : 1080, 1084
(--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125
(--) NVIDIA(0): H/V Polarity : +/+
(--) NVIDIA(0):
(--) NVIDIA(0):
(--) NVIDIA(0): Raw EDID bytes:
(--) NVIDIA(0):
(--) NVIDIA(0): 00 ff ff ff ff ff ff 00 22 f0 2b 28 01 01 01 01
(--) NVIDIA(0): 09 13 01 03 80 30 1b 78 ee ff f5 a5 56 49 9d 24
(--) NVIDIA(0): 16 50 54 a1 08 00 81 40 81 80 95 00 a9 40 b3 00
(--) NVIDIA(0): 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
(--) NVIDIA(0): 45 00 df 0d 11 00 00 1e 00 00 00 fd 00 30 4c 18
(--) NVIDIA(0): 5e 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 48
(--) NVIDIA(0): 50 20 32 31 35 39 0a 20 20 20 20 20 00 00 00 ff
(--) NVIDIA(0): 00 43 4e 54 39 30 39 5a 34 36 54 0a 20 20 00 48
(--) NVIDIA(0):
(--) NVIDIA(0): --- End of EDID for HP 2159 (DFP-0) ---
(--) NVIDIA(0):
(II) NVIDIA(0): Frequency information for HP 2159 (DFP-0):
(II) NVIDIA(0): HorizSync : 24.000-94.000 kHz
(II) NVIDIA(0): VertRefresh : 48.000-76.000 Hz
(II) NVIDIA(0): (HorizSync from EDID)
(II) NVIDIA(0): (VertRefresh from EDID)
(II) NVIDIA(0):
(II) NVIDIA(0): --- Building ModePool for HP 2159 (DFP-0) ---
(II) NVIDIA(0): Validating Mode "1920x1080":
(II) NVIDIA(0): 1920 x 1080 @ 60 Hz
(II) NVIDIA(0): For use as DFP backend.
(II) NVIDIA(0): Mode Source: EDID
(II) NVIDIA(0): Pixel Clock : 148.50 MHz
(II) NVIDIA(0): HRes, HSyncStart : 1920, 2008
(II) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200
(II) NVIDIA(0): VRes, VSyncStart : 1080, 1084
(II) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125
(II) NVIDIA(0): H/V Polarity : +/+
(WW) NVIDIA(0): Mode is rejected: PixelClock (148.5 MHz) too high for
(WW) NVIDIA(0): Display Device (Max: 140.4 MHz).
Last edited by ominide (2009-10-12 03:38:03)

Answer 1

Here it is, the reason I posted the above is because it looked llke it was ignoring or doing something different than expected with what it detected.
Xorg is not something I know very well
Thanks
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jun 25 19:52:48 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 24.0 - 94.0
VertRefresh 48.0 - 76.0
ModeLine "1920x1080_60" 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoLogo" "True"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Option "ActiveDevice" "LCD"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1920x1080_60" "1920x1080" "1920x1200"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection