Some help with sounds plz ;p

First of all, congrats for the forum ^^ great ideas here :)
Well, i'm working with a friend in a multiplayer space combat game (nameless nowdays) implemented with jsdk5. The game uses a thread to update each player object and then repaint a "main" jframe where all the things happen. I was trying to add sounds to the game, so after trying all sort of things i created a Sonido class, with a play(int clip) method that creates a thread whose run() method plays the clip identified by clip. Somethig like this:
        Audioclip[] sonidos;
     public static void play(int clip){
          final int c = clip;
               Thread reproductor = new Thread(Ship2.mGrafico){
                    public void run(){
                         sonidos[c].play();
          reproductor.start();
     }Even doing that the clip only seems to sounds when i call loop() instead of play(). why? i don't know.

Check out the bug database.
Bug ID 5070730, 5085008, 6186076.
They are all essentially the same bug. What it means is that JDK 1.5/1.6 does not play sounds less than 1 second. If sounds are very important to you don't upgrade until this bug is fixed (or loop until it is). If you need to use JDK 1.5 upgrade whenever there is a new version and hopefully it will be fixed soon. I wouldn't hold my breath though. ;)

Similar Messages

  • Need some help with sound quality

    Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
    I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
    I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.

    AecDuck wrote:
    Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
    The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
    If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
    I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
    Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
    I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
    It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable.

  • I need some help with sound in Java

    hi, i`m new to java. i`m having a through problems with a program i`m writing. i`ve added a song to an applet but it does not play. The code for this is:
    private AudioClip music;
    music = getAudioClip(
    getDocumentBase(), "titantic.wav" );
    Can some 1 tell me is that the write code. please help.

    2 things.
    1. You must also send a command to play the music file.
    2. I'm not certain, but I think that you can only load .au files this way.

  • I need some help with sound on my computer, Premiere has introduced some issues

    I have no issues with audio within premiere pro. But When I have premiere up front and am working I cant change the volume with my system icons or anything Ie keyboard roller, I noticed this when editing with my headphones the other night. I have a asus xonar essence card and it doesnt even show on the eq that there is aduio coming through even though I can hear it....But if I use say winamp or youtube, everything is normal thn as soon as I bring premiere back up front it kills the audio again and I can only control its level with the master knob in mixer, some kind of hardware issue?
    Does premiere bypass the sound card alltogether?
    Any input is appreciated!
    Elliott

    Thanks for the reply, here's some screen shots of the 3 audio preference screens
    Just odd how all the system audio including notifications music or whatever stop when premiere is the selected window. Ive reinstalled the audio drivers for my card and have tried a couple things in the audio preferences. No luck as of yet, I suppose I could try a re install of premiere but I somewhat doubt that will fix it since the program itself works fine and its this outside conflict that is the problem.

  • Need some help with strange sounds in Logic Pro 8

    Hi!
    I need some help with a problem I have in Logic Pro 8.
    When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
    Martin

    Hi Martin
    Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
    Which mac?
    Which OS?
    any hardware devices?
    if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
    Don

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need some help with computation

    Hi, I need some help with the following:
    My page 3 is a form thats shows, among other things, a document ID (:P3_DOC_ID). Next to this item I have created a button that calls a document selection form (page 10).
    On selection this forms sets 2 items:
    P10_SELECTED (Y or N)
    P10_DOC_ID (the selected documents ID value)
    When the user selects a document he returns to the calling form.
    On page 3 I now try to capture the selected values. For a test item I managed to do this by defining this items source as:
    [PL/SQL function body]
    begin
    if V('P10_SELECTED') = 'Y'
    then
    return V('P10_DOC_ID'); -- selected value
    else
    return V('P3_TEST'); -- else the original value
    end if;
    end;
    However I want P3_DOC_ID to capture the selected value. I tried using a computation but that did not work. Any ideas?
    thanks Rene

    You might want to check if the "Source Used" attribute for P3_DOC_ID is set to always or to "only when ..." it sounds like you need it set to "only when ..."
    If that does not work try this
    Place the following in a pl/sql anonymous block and turn off your
    computation.
    if :P10_SELECTED = 'Y'
    then
    :P3_DOC_ID := :P10_DOC_ID; -- selected value
    else
    :P3_DOC_ID := :P3_TEST; -- else the original value
    end if;
    Justin

  • Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

    can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw  shows message that Adobe camera raw plugin cannot be found

    That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
    Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
    If you have that file there, try to download the updated camera raw plugin from the below location.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
    In case  you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
    [Moving the discussion to Photoshop General Discussions Forum]

  • Hello everyone, hoping for some help with my new Apple Cinema Display 20"

    Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
    1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
    2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
    It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
    I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
    So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
    It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
    p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
    Thanks in advance!
    Message was edited by: telelove

    I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
    Yes, "brightness uniformity" definitely seems to be the best description of my issue.
    Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
    As for how it looks, I tried to make an example in photoshop:
    Original Image:
    http://img340.imageshack.us/img340/3045/td1ja9.jpg
    Then imagine turning the car around a bend, and then it looks like this:
    http://img266.imageshack.us/img266/959/td2hq7.jpg
    It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
    It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
    Message was edited by: telelove

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • Need some help with putting a folder in users directory

    I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
    Can any one help me out?
    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// looks for directory for list
                        "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                    } catch (Exception exc) {
                        File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Program Files/xxx/",// used only if the directory didn't exist
                            "xxxxxxxxxxxxxxxxxxxxxxx"));

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem.  Now when I open Keynote on my iPad there is nothing.  I could use some help with this problem.

    powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem.  Now when I open Keynote on my iPad there is nothing.  I could use some help with this problem.

    Morning AndreD86,
    Thanks for using Apple Support Communities.
    These articles explain exactly what is backed up by using their method.
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    and
    iCloud: Backup and restore overview
    http://support.apple.com/kb/ht4859
    Also we want to double-click the Home button and swipe the Task Bar to the right.
    Then make sure the button on the far left of Task Bar is not muted.
    Best of luck,
    Mario

Maybe you are looking for

  • Jsp,bc4j,Data web Bean , error : NO ROWS AVAILABLE FOR EDITING

    HI I'm developping a jsp application based on Bc4j. when trying to insert a new row with missing fields which must be not null, in order to be able to edit the row and correct the non seized fields, I display the edit page and it works for several vi

  • Faster Importing From Mini Dv Tape...?

    In Adobe Premiere Pro, is there a way to import from a mini dv tape faster than real-time? 

  • Organizational unit as an agent using an expression

    Hi SAP Experts, Is it possible to assign an organizational unit as an agent for my task using an expression. The organizational unit to be used is stored in a container. Since it is possible for users to be stored in a container and used as an agent

  • Remove Event Scheduling in RSCRM_BAPI

    Hi Experts, i've scheduled a query extract in RSCRM_BAPI to run after a custom event...is it possible to remove this scheduling? in SM37 there is not job planned... Thanks in advance

  • "pixelated" effect on printed photos

    I burn my iPhotos to CD then take them to (various) professional or discount photolabs for printing. They return looking oddly "pixelated": rather than a clean clear photo, you can actually see tiny pixels. The CD is always opened on a non-Mac comput