Some instr and substr fundamental

Hi,
In a procedure, my input parameter would be 123,345,456,567......I will put this in a loop..
My requirement is like first it will take 123 and i will do some calculation end loop,
then 345 and i will do some calculation end loop,
then 456 and i will do some calculation end loop,
then 567 and i will do some calculation end loop, and so on...
i think there is some instr and substr fundamental..
Will be great if i get some suggestion to solve the issue...
Thanks,
HP

Not quite.
Dbms_utilty.comma_to_table will do the job quite nicely.
http://www.java2s.com/Code/Oracle/System-Packages/demonstratestheuseofDBMSUTILITYTABLETOCOMMAandDBMSUTILITYCOMMATOTABLE.htm
Sybrand Bakker
Senior Oracle DBA

Similar Messages

PL-SQL Solve: Using INSTR and SUBSTR

I am trying to work on this and cannot get a solution. Please help
You have to use INSTR and SUBSTR to solve
Question:
You have the following acceptable value
Numberic: 0-34
80-100
or Non Numberic X S U D- D D+
Im have to use INSTR and SUBSTR functions to test that the value is a valid (as above) number before TO_NUMBER is called:
SELECT TO_NUMBER('?? ') //HERE ?? and a space (for 100 etc) is for the values as above
FROM DUAL
WHERE ....INSTR(......)<=;
(Hence if the number is true then number comes back or it says no rows)
and also id non numberic it should also be tested.
I am completely unsure about it but tried this
SELECT TO_NUMBER('34 ')
FROM DUAL
WHERE INSTR('0123456789',1,1)<=9 (looking at first number ?)
AND
INSTR('0123456789',2,2)<=9
AND
INSTR('0123456789',3,3)=0;
Please help

We have the following value that we can use:
Numeric: 0-34 and 80-100 only
or Non Numberic X S U D- D D+
Have to use INSTR and SUBSTR functions to test that the value is a valid
(for now only trying to create a function which can later be put into a procedure.)
SELECT TO_NUMBER('12 ') //e.g HERE 12 and a space for the values as above
FROM DUAL
the where clause looks at all three spaces to make sure values are correct (given number or non-numberic values only)
(Hence if the number is true then number comes back (meaning true)
or it says NO rows)
If value is non numeric, test it to allow non numberic also.
I am completely unsure about it but tried this
SELECT TO_NUMBER('34 ')
FROM DUAL
WHERE INSTR('0123456789',1,1)<=9 (looking at first number ?)
AND
INSTR('0123456789',2,2)<=9
AND
INSTR('0123456789',3,3)=0;
Something like this has to be done.....subst (instr, x,x,) i think mite help.

Instr and substr function in oracle issues

hi all
I have an issue to split my filename
Filename is as below:
ABCD01_123456789_samplename_13062012_10062012-12-12-12-1.PDF
my output as below
Col1 Col2 col3 col4 col5 col6
ABCD01 123456789 samplename 13062012 10062012 10062012-12-12-12-1.PDFcan you please help me to split this using any simple method
thanks ain advance
Edited by: A on Jun 12, 2012 8:25 PM
Edited by: A on Jun 12, 2012 8:25 PM

>
can you please help me to split this using any simple method
>
You can split the string into rows using the same technique used in this example
http://nuijten.blogspot.com/2009/07/splitting-comma-delimited-string-regexp.html
Just replace the ',' with an underscore.
Then you can convert the rows to columns using LISTAGG like this example
http://www.oracle-base.com/articles/misc/string-aggregation-techniques.php
Search the forum for 'rows to columns' and you will find plenty of other alternatives.

IF and SUBSTR in XML Publisher

Hi
I am developing a XML RTF template for a report.
All I am trying to do is, if first 4 letters of the data of xml tag ITEM = 'Summ'
then print a constant word 'Notes'
<?if: xdofx:substr(ITEM,1,4)=’Summ’?> Notes<?end if?>
I have been trying hard. IF and SUBSTR is not at all going along. Always throwing some error. Can some one please help me to resolve this issue
Thanks

Hi,
I have a similar requirement, however instead of static text in the example i.e ITEM I am trying to get a substring from a tag value directly. Ex - Tag Value <eod>23-10-2009<eod>. I am trying to pick up the value 10 in the particular example and trying to compare with 1, which would be false and hence I need to print as false. I cannot use a hardcoded value since the value between the tags <eod> is dynamic and I need to use that itself.
Can you please provide me with the sytax which can achieve this?
Regards,
Praseed

Functional difference between VISA resource name ASRL1::INSTR and COM1

Config: LabVIEW 6.02, VISA 2.6.0
I have used a text constant for "VISA Configure Serial Port.vi" for years, and just now I have run into problems.
With my application, a text constant of ASRL2::INSTR would properly open the port, but it would not send any data, but using COM2 worked.
What is the difference?

MAX sets up serial port aliases automatically when possible. Let me try to explain.
If the alias "COMx" was not previously configured in NI-VISA, and you have a serial port really named "COMx", and that VISA resource string does not have any other user-configured alias, then MAX will bind that alias to that port, regardless of what the full VISA resource string is. That part actually makes sense and shouldn't confuse anyone. If the alias "COMx" is taken, or the user has manually configured a different alias for the serial port (such as "MyDMM", for example), then MAX does not auto-assign the alias for that port. So far so good.
The confusing part in many cases is how NI-VISA itself assigns the VISA resource string. For COM3, normall
y NI-VISA would assign ASRL3::INSTR, and so on. There is 1 conflict that usually screws everything up. Since NI-VISA on Win32 allows you to open the parallel port by default as ASRL10::INSTR (for extremely historical reasons), the conflict occurs when you really have a COM10. It's not a terrible conflict, but it is confusing. NI-VISA will match every other port that it possibly can, and then just assign a unique resource name (ASRLx::INSTR) for COM10.
I am not sure why in your case NI-VISA didn't match COM3 to ASRL3::INSTR. If you want to do some experimenting, try this. Go into MAX, delete all your VISA aliases, delete LPT1 from the tree, exit MAX, restart MAX, and refresh. See if that cleared it up.
Dan Mondrik
Senior Software Engineer, NI-VISA
National Instruments

Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. ‏‏رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adil

chinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying!

My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off. Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes some

My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.
Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes somewhere from 3-5 minutes for it to boot up. Then the lock screen with the time and whatnot shows up. From this point on, my iPhone has a chance to shut itself back down and I have to repeat the process over and over again. Most of the time the lock screen flashes and then goes straight to black (shut down) but sometimes I can make it a few menus before it shuts itself down.
The only way to keep the iPhone on is to plug it into a charger of any sort. I'm fairly certain it isn't a battery charge issue because this happens at any % of power and sometimes my iPhone can use up all of its charge and not have this happen while other times I can be at 90-100% and it could randomly shut itself down. What can I do in this situation if some has some solution to this problem please let me know on [email protected] Thanks!

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

I was trying to share some photos and my i photo app is frozen. i can't access it or get it to work.

I was trying to share some photos and my i photo app is totally frozen on the desktop I can no longer access i photo or the photos I was trying to share. Help!

How were you sharing the photos?
Try to backup your iPhoto library and hold down the option and command keys while launching iPhoto - key the keys down until the first aid window appears - rebuild your database
LN

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

I have bought some movies and the don't sync to my iPod touch it comes up with this message that says it cannot be played on my iPod. Please can someone help

I have brought some movies and they just come up with this message that says it cannot be played on this iPod. I've bought movies before without iTunes Extras but these have iTunes extras and they don't want to sync with my iPod
Does anyone know what is wrong?

Sounds like you are trying to sync the HD version of the video. You should try to download the Standard Definition copy instead and sync that to your device as HD content is only compatible with the 4G iPod Touch. See here for more information:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
To prevent HD versions from being downloaded in the future head to the iTunes Store, click the Purchased link, and then select TV Shows and remove the tick mark next to Download HD when available. You should be able to download the SD version now from under this same page.
B-rock

HT201209 i have added 2 gift cards on my account purchased some songs and my credit card was charged why?

i waited to make sure i had the credit to purchase some songs and then got an email for the charges to my credit card, so i waited onother day and purchased another song and i see i got charged again for it on my credit card and my itunes account still has all the credit i started off with it, what is going on?

http://www.apple.com/support/itunes/contact/

How can I transfer some books and music from one ipad to another without having to sync and erase the lot?

I am trying to transfer some music and books from my ipad to my mothers ipad. I am using a laptop that I have had to install itunes onto. When I sselect the music I want to put onto my mothers ipad I get the message 'are you sure want to sync this ipad to this computer as it will erase all date on the ipad and replace it with this'...well something to that effect anyway.
When I plug my ipad into it it also states that syncing will erase all data and replace it with what is on itunes as my ipad is linked to another computer (im in Hobart and my usual computer is in brisbane)
Is there a simple way for me to add music and books on a usb stick to mothers ipad without having to lose everything taht she currently has on there?
Any advice is greatly appreciated
Cheers

Backup with this User Tip, restore the library to the new computer using the same tool, keep the backup up-to-date in future. Deauthorize the old computer if you no longer need to access protected content on it.
As to your issues with compilations albums select all the tracks, set the Album Artist to Various Artists and on the options tab set Part of a compilation to Yes. See Grouping tracks into albums for details.
tt2

I scanned some black and white negatives into my computer (iMac) where they were stored aas positives on the hard disc. When I import them to iPhoto they turn back into negatives. How do I change them into positives for printing?

I have scanned some black and white negatives into my computer(iMac) where they are stored on the hard disc as positives.When I import them into iPhoto to print they turn back into negatives.How do I turn them back into positives?

That's because you scanned them as B/W photos and iPhoto 08 doesn't support the grayscale color profile. You can either rescan them as color photos or export them as originals out of iPhoto to a folder on the desktop and applhy this Automator application, Convert to JPG and Embed sRGB Profile, on them and then remimport into iPhoto. You can download it from Toad's Cellar . Be sure to read the warning on the website about not applying it on your only copies.
OT

Some instr and substr fundamental

Similar Messages

Maybe you are looking for