Some iPod songs are scratching/skipping/call it what you want...

Hey,
After returning a faulty iPod in for this "new" 60GB iPod I had some trouble. When I uploaded the songs, some of them would make a scratching noise like a bad cd in an old cd player. I've tried to restore my ipod twice, and even tried uploading the songs on an older software version of itunes - yet still I have some songs doing this. It's a random selection of songs that appears to be happening to. I hope someone can assist me!

Marion,
You can do that in your LOV code. Add a filter based on the PK you want , and yes you can use bind variables in the LOV source code.
something like :
Select x display , y return
from table_z
where col_a = :P1_someitem;Hope this helps,
Sam
Please reward good answers by marking them correct or helpful!

Similar Messages

  • Some ipod songs are not displayed in itunes

    I discovered several duplicated songs on my ipod touch, so I connected to itunes (PC), but the duplicated songs were only listed once when viewing the ipod music in itunes. While in itunes, viewing my ipod music, I erased all the music on my ipod and itunes then displayed no listing of any song on my ipod. When I check directly on my ipod, there are still 36 songs on the ipod. These are the ones that are dupilicated when I sync the ipod to itunes. How can I get rid of this duplication, or, How can I completely erase all songs from my ipod?

    did you solve the problem? I have the same issue.

  • My iPod songs are automatically wiped out again!! GRRR..

    My iPod songs are gone. How can I have have them back without having to upload songs again?
    This is the second time it happened. My iPod still had 60.9 MB space in it before my songs disappeared.
    When I plugged my iPod into the PC today, it was charging. Then a few minutes later, the iPod (still plugged into the PC) started beeping. At first I don't know where the beep was coming from. When I finally realized it came from my iPod, it was too late to check what message it says on the screen. And when I open the iTunes, it prompts me to fill up the iPod Set-Up Assistant (which means that I have to start all over again transferring songs to my iPod? No way.). I can't find the songs in my iPod anymore. All of them have been wiped out now.
    The weird thing is, even with all the songs wiped out, iTunes still says that I only have 60.9 MB of memory in my iPod. It seems that the songs are still there but won't just show up. Because they still occupy the memory of my iPod. My Notes are still in the device, I can also access the files stored in the External Memory.
    The first time it happened, I did a Restore and had to download the songs from the Internet again. Now that I don't have the music files in my PC anymore, I don't want to do a Restore because I don't want to download songs again.
    Please help me fix this.

    1.If you are using some kind of file sharing program to put songs on your ipod,this might be the problem.I had a similar situation.If you delete some songs from your file-sharing program itunes wont be able to find the songs and wont play song(just on itunes),ir that the host of the song might've deleted the song himself from other to share.
    2.Make sure your itunes is up-to date,or you ipod is having hardware issues(this might be the cause if you dont use a file-sharing program).You need to put you ipod on disk mode.For more info. go on support.
    3.This step can maybe work,but i know it wont.just blow the usb cord just to make sure it is not dusty.
    4.This might also be why your songs get wiped out.You probably need a new usb cord,but first try every way you can to fix this issue before buying a new usb cord.also depends how old your usb cord is.

  • HT1351 We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer.  I put music on the new computer.  My ipod songs are not on itunes.  Will I erase them if I sync?  How do I add new music?

    We had 2 computers: his itunes library on one, and mine on the other. We got rid of both of those and got a new computer.  I put new music on the new computer.  My ipod songs are not on itunes on the new computer.  Will I erase them if I sync?  How do I add new music?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I have recently started using an old Nano and purchased some new songs. When I go to sync it wants to erase other songs to download new. Is there a way to just sync new songs to ipod without erasing existing music on devise?

    I have recently started using an old Nano and purchased some new songs. When I go to sync it wants to erase other songs to download new. Is there a way to just sync new songs to ipod without erasing existing music on devise?

    Syncing shouldn't trouch you photos unless you have photos in a Photo Library album.  These would be photos that were synced to your phone from your computer.  If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
    If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically".  Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
    Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141.  To follow the steps, first open iTunes and go to View>Show Sidebar.  Also, Transfer Purchases is now located in File>Devices.

  • ITunes will not recognize my iPod.All are latest versions of iOS.What do I do?

    iTunes will not recognize my iPod.All are latest versions of iOS.What do I do?

    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    If syncing by wifi you may need to restart your computer and try again.

  • When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

    When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

    check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  • HT5557 Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something.  Anyone have any tips on this?  Thanks, Mark

    Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something.  Anyone have any tips on this?  Thanks, Mark

    To enable the form to be signed in Reader you will need to open the form in Acrobat; goto Advanced>Enable Usage Rights and then save this copy of the form for sending out to the users.
    The user should then be able to edit and digitally sign the form. They can then email the signed/saved pdf as a browsed for attachment or via the email icon in the toolbar. Note - if you have created an email submit button on the form, then unless they have Acrobat they could only return an xml file.
    The other way to do this however is to create a dataset by 'distributing' the form. This time the Email Return button will send back a full version of the form. During the distribution setup you will have the option to email the form directly or to save it and send it later,so you can send to users as and when or even post it to a website or intranet.
    When you receive and open the returned form it will ask whether you want to add it to the predetermined dataset (or if you want to categorise the returns into geographical areas for example, you could create new additional datasets at this point). If the form is data heavy however, the dataset will become very large and unwieldy pretty quickly, but you can export the data from it (including signatures) in xml format and import this into an Excel spreadsheet.
    To simplify the Excel xml import process I'd recommend you carefully structure your form in the hierarchy (LiveCycle) into the order you would want the data items to appear in your spreadsheet and switch off those data items that you will not need by setting the default binding for the irrelevant fields to "None".
    Clear as mud? Hope this helps.

  • I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library  Do you want to erace this Ipod and synce with this itunes library?  An Ipod can only be synced with only one itunes library at a time.  Erasing and

    The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library?  An ipod can be synced with only one itunes library at a time.  Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
    I don't know what to do?  I should save my library before I replace the contents, but I don't know how to do that! HELP!!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • The margins of section # are set outside the printable area of the page. Do you want to continue?

    Hi i have a Hp 7410 all in one officejet. I have just gone from Xp Pro to Windows 7 64 bit. I have installed correct drivers and Hp's own tool tells me i have the current drivers. But i just went to print in Microsoft Word 2007 and am getting the error
    The margins of section # are set outside the printable area of the page. Do you want to continue?
    If i continue i am missing the bottom section of my document. How can i fix this as this printer worked perfectly in XP but now in Windows 7 it is not working. this is the only trouble im having.

    FYI, this is for my place of work. I put a lot of effort into getting this fixed but I am stuck. I would greatly appreciate any ideas or help. Thanks again.

  • HOW CAN I START DOWNLOADS AUTOMATICALLY? I DON'T NEED TOO SEE THE SAVE OR DISCARD BOX. THIS BUGS THE CRAP OUT OF ME. CAN I CHANGE THIS, OR ARE WE FORCED TO DO WHAT YOU THINK IS BEST? THANKS, KEITH D.

    HOW CAN I START DOWNLOADS AUTOMATICALLY? I DON'T NEED TOO SEE THE SAVE OR DISCARD BOX. THIS BUGS THE CRAP OUT OF ME. CAN I CHANGE THIS, OR ARE WE FORCED TO DO WHAT YOU THINK IS BEST? THANKS, KEITH D.

    Hey, Jeff...
    I don't know how I could have made my question any more clear -- so let me try approaching it the other way around, and refer back to your answer(s).
    You've been responding by saying that it's okay for me to remove the Creative Cloud versions of my software, but I don't have any Creative Cloud versions installed! I'm not talking about that at all, I'm talking about the software for Creative Cloud itself -- I don't use it, I don't need it, I don't want it, and all it does is nag me, telling me that there's updates for it (Creative Cloud). I have the full Adobe Creative Suite 6 Design Standard bought and paid for, I have no reason nor need to "rent" any later versions, I'm just talking about the Creative Cloud software itself that got installed on my system when I installed that suite of programs.
    Like I said, I don't use Creative Cloud at all -- all it does is "nag" me, and eat up space on my hard drive. When I go in my Windows Control Panel and look at my list of installed programs, there it is -- "Adobe Creative Suite" -- and it's listed separately from "Adobe Creative Suite 6 Design Standard" (of which I've only installed Photoshop, Acrobat and InDesign, basically, as those are the only programs I use at all at the moment). Can I just uninstall "Adobe Creative Suite" without it affecting "Adobe Creative Suite 6 Design Standard", i.e. my Photoshop, etc. will still work just fine, and I can still get updates and stuff? And by "updates" I don't mean get later versions of Photoshop, etc., I just mean any possible updates to the software that I do already have (that comes with Adobe Creative Suite 6 Design Standard).
    I hope that makes my question a little more clear?

  • My friend's iCloud was hacked. Now he has changed his password and the files are slowly coming back. But some of them are all in numbers. What has happened

    Files in iCloud are corrupted following hacking. How to restore the files?

    Depending on your situation you do have external options:
    If you are a minor (under 18 in most states..) get your parents involved.  Have your parents talk to your antagonist's parents.
    If you are an adult, or a minor and the previous suggestion did not work, you can take legal action.  There are laws against stalking and harassment.  Do not blow this off, do what you have to do to protect yourself.

  • Some purchased songs are not transferring from itunes to ipod even others from the same album did.

    Originally the songs were only partially downloaded. After completing the downloads to itunes it was suggested to de authorize the computer and then authorize the computer. Still unable to transfer to classic ipod. Even tried resetting ipod.
    Any suggestions?

    yeah, a little box comes up that says "the file ------ is not supported by the ipod" or some blah like that, and then theres this little button with a plus sign that you can click on and right next to it says 'see 181 total problems" and then it gives you a list of the things that didnt transfer. other than that, everything is fine.(well except for the fact that my music isnt transferring, of course.) its kinda new-ish, i got it in july, and its worked fine until now.
    ??   Windows XP  

  • After getting iphone, itunes says some ipod songs not authorized

    After having my iPod classic for about 3 years, I got an iPhone. The iPhone sync with iTunes went off without a hitch, but, when I then connected my iPod, I received a message saying that some of my songs were no longer authorized for this iPod. I cancelled and disconnected it, but I'm very concerned about trying again.

    Launch iTunes. From the menu bar click Store / Authorize This Computer.
    Try connecting your iPod.

  • Some of songs are cutting out............

    I bought this Ipod when it first came out. I have not had this problem since moments ago. Some music videos I have will not even play, and they used too, but they play perfectly in my ITunes. Same goes for some songs except that I get about half way through a song and it quits that song all by itself and goes into the next song. Can anyone help me resolve this issue???

    If it is a brand new song, do not waste your time trying to "fix" it.  As you would do with any defective product, contact the retailer for a replacement or refund.  If the retailer was the iTunes Store, use the iTunes Customer Service webpage.

Maybe you are looking for

  • Sync my ipod to a new computer without losing songs currently on ipod

    I had my itunes and ipod set up on a computer. Then I got a new computer and I had to reinstall itunes on that computer. But, I cant sync my iPod to my new computer because it will erase all the songs that are on it from my old computer, and replace

  • MY page up and down key does not what its suppose to do but now instead it goes forward or back a web page

    Seems like since I installed the new Firefox my Page up and down key has stopped making my web pages go down or up but instead the page up key makes the web page go forward in history and the page down key makes it go back a webpage.

  • IDVD burning-multiplexing-Disk Utility

    Read the posts on topic and all suggest it is a media problem. I have had success with Verbatim but lately IDVD is not working. I have tried various file sizes, importing from IMovie and continue with the problems. I have even tried to "save disk ima

  • Oracle Forms Developer/Services 6i Release 2

    Hi folks, I downloaded d2k6irelease2.tar (Oracle Forms Developer/Services 6i Release 2 for linux) fromhttp://otn.oracle.com/software/products/forms/htdocs/linuxsoft.html I untar the file on my linux machine however the extracted files don't seem to c

  • Question re dot releases

    I am new to the Community and this may not be the appropriate place to post this question After a dot release is installed, is it necessary to keep the preceeding version release, or can the version release be uninstalled?  I upgraded from LR4.4 to L