Some kind of "IN LIKE" type comparison dealy?

I want to do something like...
SELECT * FROM emp WHERE position_no IN LIKE (SELECT position_no_prefix||'%' FROM some_other_dealy);
Given that's not possible, does anyone know of a good way to achieve the same?

Capt. Egg wrote:
I want to do something like...
SELECT * FROM emp WHERE position_no IN LIKE (SELECT position_no_prefix||'%' FROM some_other_dealy);
Given that's not possible, does anyone know of a good way to achieve the same?why not something like:
select e.*
  from emp e
         ,some_other_dealy sod
where position_no like sod.position_no_prefix||'%'

Similar Messages

  • Restriction of exchanging some kind of files in Oracle Messenger

    Hi all,
    Is it possible to restrict exchanging some kind of files in Oracle Messenger?
    For the security, I want to restrict exchanging some kind of files like *.exe, *.vbs in Oracle Messenger.
    Regards
    Kitae

    Thomas,
    thanks for your reply. I think I am going to use POI (in Java,- from the jakarta project) to address
    this issue.
    Best Regards,
    Dan

  • I have a MackBook A1181 I need to upgrade my Safari so Outlook will work and would like to get some kind of word/writing tool on it... the info is:  Model Name:     MacBook   Model Identifier:     MacBook1,1   Processor Name:     Intel Core Duo   Processo

    I have a MackBook A1181 that I bought off Ebay :/ it came with pirate discs and no info....I need to upgrade my Safari so Outlook will work and would like to
    get some kind of word/writing tool on it... the info is:
    Model Name:          MacBook
      Model Identifier:          MacBook1,1
      Processor Name:          Intel Core Duo
      Processor Speed:          1.83 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per processor):          2 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          MB11.0061.B03
      SMC Version:          1.4f12
      Serial Number:          4H631CVDU9B
      Sudden Motion Sensor:
      State:          Enabled
    Can anybody help?!

    First correct the pirate disc issue. Buy OS X 10.6 Snow Leopard from Apple for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Snow Leopard is the latest version your macbook 1,1 will run. Oitlook is part of the Microsoft Office suite, if you want outlook you'll need to also purchase Office. If you can get by with Apple's mail program there are free alternatives to Office like Libre Office or Open Office.

  • HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

    HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

    My 2006 MacBook Pro and my 2011 MacBook Air both do it.  It happens because the earth ground stops at the power brick and is not carried through to the case of the machine.  It is not dangerous or the machine would not have been UL approved.
    Since I operate on battery 99.9999% of the time it doesn't bother me at all.

  • Some kind of technical problems (like slow data processing)...

    Some kind of technical problems (like slow data processing) with Leopard appears during the working in the local network.
    OS Snow Leopard 10.6 is installed; including all updates, the computer I currently use is Mac Pro. So I have some kind of technical problems (like slow data processing) with Leopard during the working in the local network. (Windows network).
    During the attempt to connect with network sharing (the computer is in the network) automounter process took approximately one minute.
    Later on, after the automounter process is finished it’s working quite normally over remote computer, but when you try to automount again, everything starts from the very beginning.
    The internet is working very well, it’s connected with domain, and everything is adjusted.
    I use to ask our system administrator; maybe it is necessary to activate the some kind of protocol?
    The OS Tiger is installed on the second hard disk, and it’s working well.
    Maybe someone could help me, I try to find the similar problems, but I could not find them.
    Thanks//

    A couple of things.
    First, thanks for the tips. I was starting to suspect the network might be an issue (bad nic, bad router, something).
    But netstat -s was showing an average of about .15% packet loss. For a web server that seems to be a pretty good value so I'm not sure.
    I did, however, ask someone else to look at the server because I'd spent the whole week on just server performance and was going out of my mind. This second pair of eyes really helped as he found that the pagefile for the server was set at 2mb!? Still trying to figure out how that happened. But we increased the pagefile to a much better value. There wasn't an immediate change in performance, but over time the server appears to have begun to respond better.
    Occasionally I still get these 'lag spikes' but nowhere near what they were and the delay is much smaller as well, which is probably being caused by something else entirely (like bad programming on my part, hah).

  • I'm looking for a template for writing an eBook in Pages. I know about exporting to PDF but wondered if I needed a specific type of template or another software of some kind. I have an older iBook G4 (and love it BTW) and am using Pages 3.03

    I'm looking for a template for writing an eBook in Pages. I know about exporting to PDF but wondered if I needed a specific type of template or another software of some kind. I have an older iBook G4 (and love it BTW) and am using Pages 3.03. Anybody with any ideas on what to od? Thanks

    Peter,
    does Pages v4 (09) work on a G4 chip? I think I've updated this old Mac iBook as far as it will go. In other words will I need to buy a newer laptop to get the Pages 09 to work and ouput to an eBook? Thanks. Richard

  • Can we get some kind of effect for iphone lock screen???

    i'm looking into changing my lock screen. i would like to get some kind of effect instead of the plane lock screen that we already have. any suggestions if any and possible to do???

    Switch now, don't wait. You sound like you are more of a Android OS type user (a rooted Android device at that) and Apple is probably never going to make the changes you want. You definitely do not want to look at Windows 8 mobile which is even stodgier than iOS.
    Good luck with your Android device.

  • My iPad built in speakers was making some kind of static clicking noise, should i be worried?

    I was on my iPad (iPad 4th Generation) when I started hearing some kind of clicking sound like the sound you hear when someone touches you with static electricity, this happened every time I touched the screen to type. it also happened when I played and paused music (only clicked once for playing and pausing music). Also when I played music it sounded like only the left side of the speaker was playing the music therefore there was no right side of the music, basically it wasn't playing the song in stereo and I could only hear one side of the song. However it stopped when I fiddled with the side volume buttons, now it hasnt happned again, but I'm still worried.

    Intermittent power problems are usually a sign of something about to go wrong. Get your machine in to a Genius Bar (or other Authorized Apple Service Provider) to have it checked out. In the meantime go to Disk Utility and check the SMART status. It might tell you that nothing is wrong but it can't hurt to look. A logic board issue could be looming for you. The loud (screeching)  noise usually signals a HD problem. On-again / off-again behavior is not uncommon when something is on its way to dysfunction. 

  • Will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are in use

    will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are being used .
    If splitter will work any recomendations as to best type to use

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • HT201077 photos not getting added up in my photostream. It's showing some kinda registry error in my windows. Plz help

    photos not getting added up to my photostream. It's showing some kinda registry error in my windows. Plz help!!

    Hi Melissa_C!
    I have an article for you that may help shed light on this circumstance:
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/ht4486
    How long are My Photo Stream photos stored in iCloud?
    The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
    How many photos are stored in My Photo Stream on my devices and computers?
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
    Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
    Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Rich Black – Some kind of guideline / template?

    Hi All...
    There is an ongoing thread about what "Rich Black" AI uses:
    http://forums.adobe.com/thread/429978?tstart=0
    From the posts, i gather that, forget AI, there are a lot of options based on print quality paper stock, surfacing and finishing(?).
    D'you folks think it possible to put up a kind of broad charectorisation of black-ink composition depending on relevant parameters?
    Look, it doesn't have to be absolutely precise but a working rule of thumb. Maybe it could be posted as a sticky faq.
    JJ

    Scott...
    That's getting somewhere... I was thinking of a basic kind of reference chart for newbies (and others)... kind of like:
    Paper
    Screen
    GSM
    CMYK
    Newsprint
    xx
    40 0 0 100
    Newsprint
    yy
    40 20 20 100
    Coated Stock
    225
    40 40 40 100
    PDF for web / email
    Monitor
    50 40 40 100
    Some kind of a generic thing that would help get people started and have the caveat to check with their printer before final output. Could be a sticky.
    Think it'd be of any help or just a waste of time?

  • Is there some kind of script similar to TWM's iconify for any WM or DE

    I know that's a rather specific question, but I really want to find something similar.
    Today I was playing around with TWM and modifying it to work as I wanted it, but on the end I decided, that I still prefer KDE over it.
    But one option that really stuck with me was iconify.
    I guess in more modern WM's it was replaced by minimize, but I kind of like the idea of having "icons" of minimized windows floating around my desktop.
    So anyway, is anyone aware of some kind of script that would have a similar option?
    And if there isn't any how hard would it to make it "myself" (NB.: I'm not really a programmer, so if anyone else thinks this is a good idea, we could work together or something).
    Thanks in advance.

    Many panels can do this.  Specifically, I think tint2 would be the easiest to configure for something like the Win3.1 style of iconifying.  Just set the tint2rc to only show iconified items, have all transparent backgrounds, and to show only icons and no text.
    EDIT: I guess this depends on whether you'd want to be able to drag the icons around.  Tint2 would not allow this.  They'd just show when the window was iconified, and could be clicked on to show the window again.  As another option, Rox desktop manager does something like this if I'm remembering right (it's been a while).
    Last edited by Trilby (2013-11-03 21:38:01)

  • Since I actualize my iphone 4 to ios6 I can´t download applications from app store in it they seem to by downloading but within some seconds it's like if not clicked the download button. But then I have "waiting" mode applications that I never search for.

    Since I actualize my iphone 4 to ios6 I can´t download applications from app store in it they seem to by downloading but within some seconds it's like if not clicked the download button. But then I have "waiting" mode applications that I never search for.

    Hi nitish7
    Thank you for posting and welcome to Nokia Support Discussions! 
    Can you provide us the following information to better assist you:
    1. Model of your phone.
    2. Are you downloading from Nokia Store on the phone or using Nokia Suite?
    3. Type of connection you're using (WiFi/mobile data)
    4. Any error message you're getting?
    If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

  • I want to buy an iPad for my children for Christmas. Will they be able to play games and get on the Internet with this? Also, will they automatically be able to get on the Internet or will I have to purchase some kind of package?

    I want to buy an iPad for my children for Christmas. Will they be able to play games and get on the Internet with this? Also, will they automatically be able to get on the Internet or will I have to purchase some kind of package?

    Yes, they can play games - there are hundreds if not thousands of games available in the iTunes Store. Beware of the "free" games; many are free for the base game but charge for things like additional levels, "coins" etc. and those paid add-ons can add up quickly, to dozens or even in some cases hundreds of dollars. I'd strongly suggest you set up restrictions on the iPad to prevent your children from making unauthorized purchases. See:
    http://ipod.about.com/od/iphonehowtos/ht/Using-Iphone-Content-Restrictions.htm
    You will need an Internet provider of some sort; Apple is not a provider and so the iPad does not include a data service. You can either use a home Internet connection with a WiFi access point (aka "router") or you can get an iPad with WiFi+Cellular and sign up for a data plan with a cell carrier. WiFi through a home Internet service will probably be cheaper.
    Regards.

  • When I create billing some  time it calls condtion type KOFI or KOFK

    Hi Friends,
    I need your help in case of FI-SD flow.
    When I  create billing document for same category
    1) Material type
    2) Sale org.
    3) Plant
    4) Division
    5) Revenue cost element
    Some time it calls condition type KOFI and in some material it calls KOFK.  I  don't why when the above category are same two different condition type are coming in different - 2 material.
    Both condition types are assigned in our customization.
    Basic question is that there is  any configuration in material master or sd . who calls the condition type at the time of creating billing.
    Regards
    Kailash

    Hi,
        The use of Kofi or Kofk is dependant on the master data.
    If a Cost assignment exists (eg WBS - element)  KOFK is used.
    If no assignment exists - KOFI is used.
    Kind regards

Maybe you are looking for